356-1795 WIRING GP-ELECTRONIC CONTROL S/N TXG1-UP; LHX26008-UP PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE FOR USE WITH @@@@@354-0041@@@@@ ALSO AN ATTACHMENT RM-500

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 356-1795 WIRING GP-
1. 239-5914 WIRING GP-
2. 239-5914 WIRING GP-
3. 224-9816 WIRING GP-
4. 245-0626 WIRING GP-
5. 245-0626 WIRING GP-
6. 224-9821 WIRING GP-
7. 224-9821 WIRING GP-
8. 224-9821 WIRING GP-
9. 224-9821 WIRING GP-
0. INFORMATION

RECLAIMER MIXER RM-500 RECLAIMER MIXER ASW
RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine KEBP0276 RM-500 ASW (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

224-9819 WIRING GP-CENTER

356-1795 WIRING GP-ELECTRONIC CONTROL

239-5914 WIRING GP-ENGINE ELECTRONIC

224-9816 WIRING GP-FRONT

#KEBP02760310

356-1795: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

356-1795 WIRING GP-ELECTRONIC CONTROL
S/N TXG1-UP; LHX26008-UP
PART OF 225-1523, 352-6171, 366-2132, 366-2133, 417-9324, 422-0089 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0041@@@@@
ALSO AN ATTACHMENT

i03914019 KEBP0276

3561795 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[23]	STRAP-CABLE
2.	206-1345	[2]	STRAP-CABLE
3.	288-1023	[1]	BRACKET-SUPPORT
4.	354-0049	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[1]	STRAP-CABLE
	8T-8737	[93]	PLUG-SEAL
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	126-1766	[68]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	211-6807	[1]	COVER-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	288-7324	[1]	SEAL-CONNECTOR
	289-5150 E		SLEEVE (9-CM)
5.	0S-0509	[4]	BOLT (3/8-16X0.75-IN)
6.	0S-1576	[2]	BOLT (5/8-18X2-IN)
7.	104-6202	[2]	CLIP (LADDER)
8.	132-5789	[4]	CLIP (LADDER)
9.	1A-4273	[1]	BOLT (5/8-18X1.25-IN)
10.	3B-1915	[1]	BOLT (3/8-16X1.375-IN)
11.	4P-7429	[1]	CLIP (LADDER)
12.	4P-7581	[4]	CLIP (LADDER)
13.	4P-8134	[5]	CLIP (LADDER)
14.	5M-2894	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
15.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
16.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	E		ORDER BY THE CENTIMETER

#KEBP02760311

239-5914: WIRING GP-ENGINE ELECTRONIC

WIRING GP-ENGINE ELECTRONIC

239-5914 WIRING GP-ENGINE ELECTRONIC
S/N LHX1-10576
PART OF 225-1523 ENGINE AR-COMPLETE

i02067535 KEBP0276

2395914 WIRING GP-ENGINE ELECTRONIC Parts scheme

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
3.	239-5929	[1]	HARNESS AS-ENGINE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS WEDGE)
	8T-8737	[80]	PLUG-SEAL
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
	227-4002	[1]	PLUG AS-CONNECTOR (108-PIN)
5.	0S-0509	[5]	BOLT (3/8-16X0.75-IN)
6.	0S-1576	[2]	BOLT (5/8-18X2-IN)
7.	104-6202	[2]	CLIP (LADDER)
8.	132-5789	[5]	CLIP (LADDER)
9.	1A-4273	[1]	BOLT (5/8-18X1.25-IN)
10.	3B-1915	[1]	BOLT (3/8-16X1.375-IN)
11.	4P-7429	[1]	CLIP (LADDER)
12.	4P-7581	[4]	CLIP (LADDER)
13.	4P-7582	[1]	CLIP (LADDER)
14.	4P-8134	[5]	CLIP (LADDER)
15.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
16.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
17.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)

#KEBP02760312

239-5914: WIRING GP-ENGINE ELECTRONIC

WIRING GP-ENGINE ELECTRONIC

239-5914 WIRING GP-ENGINE ELECTRONIC
S/N LHX10577-26007
PART OF 225-1523 ENGINE AR-COMPLETE

i02719144 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[24]	STRAP-CABLE
2.	206-1345 C	[2]	STRAP-CABLE
3.	239-5929	[1]	HARNESS AS-ENGINE
	3S-2093	[1]	STRAP-CABLE
	114-8843 E		SLEEVE-PLASTIC (160-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	211-6807	[1]	COVER-CONNECTOR
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
4.	288-1023 C	[1]	BRACKET-SUPPORT
5.	0S-0509	[5]	BOLT (3/8-16X0.75-IN)
6.	0S-1576	[2]	BOLT (5/8-18X2-IN)
7.	104-6202	[2]	CLIP (LADDER)
8.	132-5789	[5]	CLIP (LADDER)
9.	1A-4273	[1]	BOLT (5/8-18X1.25-IN)
10.	3B-1915	[1]	BOLT (3/8-16X1.375-IN)
11.	4P-7429	[1]	CLIP (LADDER)
12.	4P-7581	[4]	CLIP (LADDER)
13.	4P-8134	[5]	CLIP (LADDER)
14.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
15.	5P-8247	[3]	WASHER-HARD (17X32X3.5-MM THK)
16.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#KEBP02760313

224-9816: WIRING GP-FRONT

WIRING GP-FRONT

224-9816 WIRING GP-FRONT
S/N ASW1-UP
PART OF 225-3875 ELECTRICAL AR

i02204902 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-9090	[1]	S-HOOK
2.	3S-2093	[55]	STRAP-CABLE
3.	7V-5626	[4]	CLAMP
4.	7V-5628	[3]	PLATE (TOP)
5.	7V-6089	[2]	CLAMP
6.	102-8705	[2]	PLATE (TOP)
7.	116-0118	[8]	CLIP
8.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
9.	156-3616	[4]	CLAMP-HALF
10.	163-1201	[2]	HORN AS (24-VOLT, LOW TONE)
11.	177-2215	[7]	STRAP-DUAL CLAMP
12.	189-3158	[1]	SUPPRESSOR-ARC
13.	238-0434 Y	[1]	HARNESS AS-FRONT (OPERATOR CONTROLS)
14.	239-8282	[1]	PLATE AS
15.	240-6928	[1]	MOUNT AS
16.	243-4689	[1]	MOUNT AS
17.	132-5789	[1]	CLIP (LADDER)
19.	5P-4295	[1]	CLIP
20.	4P-7429	[1]	CLIP (LADDER)
21.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
22.	096-5962	[4]	WASHER-HARD (3.4X7X0.8-MM THK)
23.	6V-2480	[4]	SCREW (4-40X0.5-IN)
24.	7K-1181	[24]	STRAP-CABLE
25.	7X-0818 M	[2]	BOLT (M8X1.25X45-MM)
26.	7X-2533 M	[4]	BOLT (M6X1X35-MM)
27.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
28.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
29.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
30.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
31.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4244 M	[1]	NUT (M12X1.75-THD)
33.	9N-7446	[4]	LOCKNUT (4-40-THD)
34.	1G-9089 J		CHAIN (1-DM)
35.	9X-2480 M	[1]	BOLT (M6X1X45-MM)
36.	130-5300	[1]	CLIP
39.	8C-8451 M	[1]	BOLT (M6X1X40-MM)
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02760314

245-0626: WIRING GP-PLATFORM

WIRING GP-PLATFORM

245-0626 WIRING GP-PLATFORM
S/N ASW1-333
PART OF 225-3862 OPERATOR AR
AN ATTACHMENT

i02199399 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7R-7908	[4]	CLAMP
2.	7V-5628	[2]	PLATE (TOP)
3.	177-2215	[1]	STRAP-DUAL CLAMP
4.	238-0437	[1]	HARNESS AS-PANEL (OPERATOR CONSOLE)
5.	242-4346	[1]	HARNESS AS-CONSOLE (SIDE)
6.	242-4347	[1]	HARNESS AS-PLATFORM (OPERATOR CONSOLE)
7.	245-1782	[1]	WIRE AS
8.	4P-8134	[2]	CLIP (LADDER)
9.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
10.	7C-4354	[1]	CLIP
11.	7K-1181	[13]	STRAP-CABLE
12.	8C-8451 M	[4]	BOLT (M6X1X40-MM)
13.	8T-2659 M	[2]	LOCKNUT (M4X0.7-THD)
14.	8T-4244 M	[2]	NUT (M12X1.75-THD)
15.	160-2243 G		SLEEVE-ABRASION (87.01-IN)
16.	9G-0011	[1]	SWITCH AS-TOGGLE (MODE SELECT)
	3L-8187	[3]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[3]	SCREW-MACHINE (6-32X0.25-IN)
	G		ORDER BY THE INCH
	M		METRIC PART

#KEBP02760315

245-0626: WIRING GP-PLATFORM

WIRING GP-PLATFORM

245-0626 WIRING GP-PLATFORM
S/N ASW334-UP
PART OF 225-3862 OPERATOR AR
AN ATTACHMENT

i03871512 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[2]	STRAP-CABLE
2.	7V-5628	[2]	PLATE (TOP)
3.	177-2215 C	[2]	STRAP-DUAL CLAMP
4.	238-0437	[1]	HARNESS AS-PANEL (OPERATOR CONSOLE)
	9X-3401	[37]	PIN-CONNECTOR (16-GA TO 18-GA)
	126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
	160-2243 G		SLEEVE-ABRASION (244.5-IN)
	180-9340	[37]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[3]	SOCKET-CONNECTOR (14-GA TO 16-GA)
5.	242-4347	[1]	HARNESS AS-PLATFORM (OPERATOR CONSOLE)
	9X-3401	[22]	PIN-CONNECTOR (16-GA TO 18-GA)
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	8T-8737	[18]	PLUG-SEAL
	9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	180-9340	[22]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
6.	245-1782	[1]	WIRE AS
7.	349-4372 C	[1]	HARNESS AS-SWITCH (GROUND LEVEL SHUTDOWN)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	197-7565	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	160-2242 G		SLEEVE-ABRASION (137.8-IN)
8.	351-9786 C	[1]	HARNESS AS-CONSOLE (SIDE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7X-6222	[2]	PLUG AS-CONNECTOR (24-PIN)
			(EACH INCLUDES)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-8737	[1]	PLUG-SEAL
	180-9340	[47]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
9.	4P-8134	[2]	CLIP (LADDER)
10.	096-5962 C	[16]	WASHER-HARD (3.4X7X0.8-MM THK)
11.	103-6262 C	[8]	SCREW-MACHINE (4-40X0.63-IN)
12.	6V-9491 M	[4]	SCREW-MACHINE (M4X0.7X20-MM)
13.	6V-1889	[1]	CLIP (LOOP)
14.	7K-1181	[13]	STRAP-CABLE
15.	7R-7908	[4]	CLAMP
16.	8C-8451 M	[4]	BOLT (M6X1X40-MM)
17.	8T-2659 M	[2]	LOCKNUT (M4X0.7-THD)
18.	8T-4244 M	[2]	NUT (M12X1.75-THD)
19.	9G-0011	[1]	SWITCH AS-TOGGLE (MODE SELECT)
	3L-8187	[3]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[3]	SCREW-MACHINE (6-32X0.25-IN)
20.	9N-7446 C	[8]	LOCKNUT (4-40-THD)
21.	160-2243 G		SLEEVE-ABRASION (87-IN)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#KEBP02760316

224-9821: WIRING GP-REAR

WIRING GP-REAR

224-9821 WIRING GP-REAR
S/N ASW1-114
PART OF 225-3875 ELECTRICAL AR

i02205057 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8781	[10]	CLAMP (HALF)
2.	6R-0486 Y	[1]	SENSOR GP-POSITION (ROTOR LIFT LOCK)
3.	107-4749	[6]	PLATE
4.	116-0118	[11]	CLIP
5.	154-4892 M	[2]	BOLT-STACKING (M8X1.25X61-MM)
6.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
7.	177-2215	[3]	STRAP-DUAL CLAMP
8.	206-0452	[2]	PLATE
9.	206-6419	[2]	CLAMP-HALF
10.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	248-7479	[1]	HARNESS AS-REAR (MAIN)
	102-8802	[7]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	8T-8737	[47]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[32]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	183-5784	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
12.	249-3264	[1]	BRACKET AS
13.	095-0914	[1]	CLIP
14.	118-5125	[1]	CLIP (LOOP)
15.	132-5789	[2]	CLIP (LADDER)
16.	258-4608	[4]	CLAMP-HALF
17.	3S-8665	[1]	CLIP (LOOP)
18.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
19.	5P-9297	[3]	CLIP (LOOP)
20.	7C-4354	[1]	CLIP
21.	7K-1181	[63]	STRAP-CABLE
22.	7X-2533 M	[12]	BOLT (M6X1X35-MM)
23.	7X-7729	[6]	WASHER (11X25X3-MM THK)
24.	8M-2772	[1]	CLIP (LOOP)
25.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
29.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
30.	8T-4191 M	[2]	BOLT (M10X1.5X16-MM)
31.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4244 M	[4]	NUT (M12X1.75-THD)
33.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02760317

224-9821: WIRING GP-REAR

WIRING GP-REAR

224-9821 WIRING GP-REAR
S/N ASW115-116
PART OF 225-3875 ELECTRICAL AR

i02293936 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8781	[10]	CLAMP (HALF)
2.	6R-0486 Y	[1]	SENSOR GP-POSITION (ROTOR LIFT LOCK)
3.	107-4749	[6]	PLATE
4.	116-0118	[11]	CLIP
5.	154-4892 M	[2]	BOLT-STACKING (M8X1.25X61-MM)
6.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
7.	177-2215	[3]	STRAP-DUAL CLAMP
8.	206-0452	[2]	PLATE
9.	206-6419	[2]	CLAMP-HALF
10.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	248-7479	[1]	HARNESS AS-REAR (MAIN)
	102-8802	[7]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	8T-8737	[47]	PLUG-SEAL
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[6]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[32]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	183-5784	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
12.	249-3264	[1]	BRACKET AS
13.	095-0914	[1]	CLIP
14.	118-5125	[1]	CLIP (LOOP)
15.	132-5789	[2]	CLIP (LADDER)
16.	258-4608	[4]	CLAMP-HALF
17.	3S-8665	[1]	CLIP (LOOP)
18.	5P-4115	[1]	WASHER-HARD (7.2X19X2-MM THK)
19.	5P-9297	[3]	CLIP (LOOP)
20.	7C-4354	[1]	CLIP
21.	7K-1181	[63]	STRAP-CABLE
22.	7X-2533 M	[12]	BOLT (M6X1X35-MM)
23.	7X-7729 C	[7]	WASHER (11X25X3-MM THK)
24.	8M-2772	[1]	CLIP (LOOP)
25.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	8T-4136 M	[6]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
29.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
30.	8T-4191 CM	[1]	BOLT (M10X1.5X16-MM)
31.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4244 M	[4]	NUT (M12X1.75-THD)
33.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
34.	8T-9371 C	[1]	BOLT (3/8-16X0.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02760318

224-9821: WIRING GP-REAR

WIRING GP-REAR

224-9821 WIRING GP-REAR
S/N ASW117-195
PART OF 225-3875 ELECTRICAL AR

i02300971 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8781	[10]	CLAMP (HALF)
2.	6R-0486 Y	[1]	SENSOR GP-POSITION (ROTOR LIFT LOCK)
3.	107-4749	[6]	PLATE
4.	116-0118	[11]	CLIP
5.	154-4892 M	[2]	BOLT-STACKING (M8X1.25X61-MM)
6.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
7.	177-2215	[3]	STRAP-DUAL CLAMP
8.	206-0452	[2]	PLATE
9.	206-6419	[2]	CLAMP-HALF
10.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5623 D		WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH)
	9X-1813 E		SLEEVE (31-CM)
11.	248-7479	[1]	HARNESS AS-REAR (MAIN)
12.	268-5879 C	[1]	BRACKET AS
13.	095-0914	[1]	CLIP
14.	118-5125	[1]	CLIP (LOOP)
15.	132-5789	[2]	CLIP (LADDER)
16.	258-4608	[4]	CLAMP-HALF
17.	3S-8665	[1]	CLIP (LOOP)
18.	5P-4115 C	[2]	WASHER-HARD (7.2X19X2-MM THK)
19.	5P-9297	[3]	CLIP (LOOP)
20.	7C-4354	[1]	CLIP
21.	7K-1181	[64]	STRAP-CABLE
22.	7X-2533 M	[12]	BOLT (M6X1X35-MM)
23.	7X-7729 C	[8]	WASHER (11X25X3-MM THK)
24.	8M-2772	[1]	CLIP (LOOP)
25.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	8T-4136 CM	[4]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
29.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
30.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
31.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4244 M	[4]	NUT (M12X1.75-THD)
34.	8T-9371	[1]	BOLT (3/8-16X0.5-IN)
35.	8T-4195 CM	[2]	BOLT (M10X1.5X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP02760319

224-9821: WIRING GP-REAR

WIRING GP-REAR

224-9821 WIRING GP-REAR
S/N ASW196-UP
PART OF 225-3875 ELECTRICAL AR

i02868504 KEBP0276

For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8781	[8]	CLAMP (HALF)
2.	6R-0486 Y	[1]	SENSOR GP-POSITION (ROTOR LIFT LOCK)
3.	107-4749	[6]	PLATE
4.	116-0118	[11]	CLIP
5.	154-4892 M	[2]	BOLT-STACKING (M8X1.25X61-MM)
6.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
7.	177-2215	[3]	STRAP-DUAL CLAMP
8.	206-0452	[2]	PLATE
9.	206-6419	[2]	CLAMP-HALF
10.	213-9100	[1]	ALARM AS (BACKUP)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
	9X-1813 E		SLEEVE (29-CM)
11.	248-7479 Y	[1]	HARNESS AS-REAR
12.	268-5879	[1]	BRACKET AS
13.	095-0914	[1]	CLIP
14.	118-5125	[1]	CLIP (LOOP)
15.	132-5789	[2]	CLIP (LADDER)
16.	258-4608	[4]	CLAMP-HALF
17.	3S-8665	[1]	CLIP (LOOP)
18.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
19.	5P-9297	[3]	CLIP (LOOP)
20.	7C-4354	[1]	CLIP
21.	7K-1181	[64]	STRAP-CABLE
22.	7X-2533 M	[12]	BOLT (M6X1X35-MM)
23.	7X-7729	[8]	WASHER (11X25X3-MM THK)
24.	8M-2772	[1]	CLIP (LOOP)
25.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4133 M	[2]	NUT (M10X1.5-THD)
27.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
28.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
29.	8T-4171 M	[2]	BOLT (M6X1X12-MM)
30.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
31.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	8T-4244 M	[4]	NUT (M12X1.75-THD)
34.	8T-9371	[1]	BOLT (3/8-16X0.5-IN)
35.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
36.	130-5300 C	[1]	CLIP
37.	312-6511 CY	[1]	HARNESS AS-SOLENOID
38.	128-5531	[2]	CLAMP-HALF
39.	5P-4116	[3]	WASHER-HARD (8.8X20.5X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery - Recycle
RM-500 Soil Stabilizer

Engine Hour Meter
RM-500 Soil Stabilizer

Battery Disconnect Switch
RM-500 Soil Stabilizer

Operator Interlocks
RM-500 Soil Stabilizer

Service Light Power Receptacle
RM-500 Soil Stabilizer

Load Controller
RM-500 Soil Stabilizer

Battery - Clean
RM-500 Soil Stabilizer

Battery or Battery Cable - Inspect/Replace
RM-500 Soil Stabilizer

Circuit Breakers - Reset
RM-500 Soil Stabilizer

Load Controller
RM-500 Soil Stabilizer

Battery or Battery Cable - Inspect/Replace
RM-500 Soil Stabilizer

Circuit Breakers - Reset
RM-500 Soil Stabilizer

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Procedure to Rework Rear Harness to Install Red LED Lamps on Certain Reclaimer Mixers{1408}
Procedure to Rework Rear Harness to Install Red LED Lamps on Certain Reclaimer Mixers{1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure to Adjust the Routing of Hydraulic Lines and Cables is Used on RM-500 Road Reclaimer/Soil Stabilizer{1374, 1408, 5057}
Procedure to Adjust the Routing of Hydraulic Lines and Cables is Used on RM-500 Road Reclaimer/Soil Stabilizer{1374, 1408, 5057}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ROUTING OF THE WIRING GROUP ON CERTAIN RM500 RECLAIMER-MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE ROUTING OF THE WIRING GROUP ON CERTAIN RM500 RECLAIMER-MIXERS

Service Letter-Australia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CFEL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-CSARL

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Specifications

Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines

Pressure Switch (Parking Brake)
RM-500 Road Reclaimer/Soil Stabilizer Power Train

Temperature Sensor (Hydraulic Oil)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Systems Operation

Electrical Schematic (Auxiliary Hydraulic System)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electrical System (Rotor Drive)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electrical Schematic (Rotor Drive System)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electrical System (Cooling)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electrical Schematic (Cooling System)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines

Sensor (Rotor Latch) - Adjust
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Position Sensor (Front Steering) - Calibrate
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Position Sensor (Rear Steering) - Calibrate
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Electrical Connectors - Inspect
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C15 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C15 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C15 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C11 and C15 Engines for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C11 and C15 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C15 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C11 and C15 Engines for Caterpillar Built Machines

Wiring Harness (Short Circuit) - Test
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System

Electrical Connector - Inspect
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System

Connector Locations
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System

Battery Voltage - Test
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Pressure Switch (Parking Brake) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Power Train

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A New Harness is Now Used {1120, 1408}
2008/02/25

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

An Improved Backup Alarm is Now Available {7406}
2009/01/26

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

LED Lamps are Used on Certain Reclaimer Mixers {1408}
2010/10/25

Procedure to Adjust the Routing of Hydraulic Lines and Cables on Certain Road Reclaimer/Soil Stabilizers to Prevent Interference Are Available {1374, 1408, 5057}
2011/09/23

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}

Caterpillar Parts SIS Catalog RM-500 :

224-9819 WIRING GP-CENTER

349-4298 WIRING GP-CAMERA

253-0724 WIRING GP-CAB

165-5970 SWITCH GP-TOGGLE

158-6632 SWITCH GP-PUSH BUTTON

239-5914 WIRING GP-ENGINE ELECTRONIC

224-9816 WIRING GP-FRONT

245-0626 WIRING GP-PLATFORM

224-9821 WIRING GP-REAR

Truck sale:

Caterpillar RM-500
- stabilizers / reclaimers
BERGERAT MONNOYEUR SP. Z O.O.

527,850

Caterpillar RM500B, stabilizers / reclaimers, Construction
- stabilizers / reclaimers
BLANCHARD MACHINERY CO.

152,369

Caterpillar RM-500, stabilizers / reclaimers, Construction

427,850

Caterpillar RM500B, stabilizers / reclaimers, Construction

445,000

Caterpillar RM500B, stabilizers / reclaimers, Construction