AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

231-6160 CYLINDER & MTG GP-LIFT -ROTOR S/N ASW1-116 PART OF 225-3867 HYDRAULIC AR-AUXILIARY RM-500 RECLAIMER MIXER


HYDRAULIC SYSTEM
CYLINDER GP

RECLAIMER MIXER RM-500 RECLAIMER MIXER ASW
 RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine KEBP0276 RM-500 ASW   (2006)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MTG GP-HOOD TILT
251-6156 CYLINDER & MTG GP-HOOD TILT
CYLINDER & MTG GP-HYDRAULIC
426-0874 CYLINDER & MTG GP-HYDRAULIC
CYLINDER & MTG GP-LIFT
231-6160 CYLINDER & MTG GP-LIFT
CYLINDER & MTG GP-LIFT
231-6160 CYLINDER & MTG GP-LIFT
CYLINDER & MTG GP-LIFT
231-6160 CYLINDER & MTG GP-LIFT
CYLINDER & MTG GP-TILT
227-3890 CYLINDER & MTG GP-TILT
 

#KEBP02760410
 

231-6160: CYLINDER & MTG GP-LIFT

231-6160 CYLINDER & MTG GP-LIFT -ROTOR
S/N ASW1-116
PART OF 225-3867 HYDRAULIC AR-AUXILIARY
i02196625 KEBP0276
2316160 CYLINDER & MTG GP-LIFT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0599 [2] CLAMP-BAND  
2. 054-3430 [1] CHAIN AS  
3. 077-3124 [2] SPACER (2-MM THK)  
4. 2B-2694 [2] BOLT (5/16-18X2-IN)  
5. 106-4120 [4] BUSHING-SPRING  
6. 138-7125 [2] BUMPER  
7. 153-2375 [2] BLOCK  
8. 154-6741 [2] PIN AS  
9. 159-1114 [2] ROD AS  
10. 159-1115 [2] ROD  
11. 160-4733 [2] PIN AS  
12. 169-5730 [1] PIN AS  
13. 203-4379 Y [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, LH)  
14. 203-4380 Y [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, RH)  
15. 243-4578 [1] PLATE  
16. 253-0777 [1] BOLT (M24X3X143-MM)  
17. 6V-7676 M [1] NUT (M24X3-THD)  
18. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760411
 

231-6160: CYLINDER & MTG GP-LIFT

231-6160 CYLINDER & MTG GP-LIFT -ROTOR
S/N ASW117-118
PART OF 225-3867 HYDRAULIC AR-AUXILIARY
i02276864 KEBP0276
2316160 CYLINDER & MTG GP-LIFT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0599 [2] CLAMP-BAND  
2. 054-3430 [1] CHAIN AS (ROTOR LIFT)  
3. 077-3124 [2] SPACER (2-MM THK)  
4. 5C-2890 CM [4] NUT (M6X1-THD)  
5. 106-4120 [4] BUSHING-SPRING  
6. 138-7125 [2] BUMPER  
7. 153-2375 [2] BLOCK  
8. 154-6741 [2] PIN AS  
9. 265-3431 C [2] ROD AS  
10. 265-3141 C [2] ROD  
11. 160-4733 [2] PIN AS  
12. 169-5730 [1] PIN AS  
13. 203-4379 Y [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, LH)  
14. 203-4380 Y [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, RH)  
15. 243-4578 [1] PLATE  
16. 253-0777 [1] BOLT (M24X3X143-MM)  
17. 6V-7676 M [1] NUT (M24X3-THD)  
18. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 106-6340 C [4] SPACER (10.74X17.14X7-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760412
 

231-6160: CYLINDER & MTG GP-LIFT

231-6160 CYLINDER & MTG GP-LIFT -ROTOR
S/N ASW119-UP
PART OF 225-3867 HYDRAULIC AR-AUXILIARY
i02520445 KEBP0276
2316160 CYLINDER & MTG GP-LIFT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0599 [2] CLAMP-BAND  
2. 054-3430 [1] CHAIN AS (ROTOR LIFT)  
3. 077-3124 [2] SPACER (2-MM THK)  
4. 5C-2890 M [4] NUT (M6X1-THD)  
5. 106-6340 [4] SPACER (10.74X17.14X7-MM THK)  
6. 138-7125 [2] BUMPER  
7. 153-2375 [2] BLOCK  
8. 154-6741 [2] PIN AS  
9. 265-3431 [2] ROD AS  
10. 265-3141 [2] ROD  
11. 160-4733 [2] PIN AS  
12. 169-5730 [1] PIN AS  
13. 284-0813 CY [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, LH)  
14. 284-0814 CY [1] CYLINDER GP-HYDRAULIC (ROTOR LIFT, RH)  
15. 243-4578 [1] PLATE  
16. 253-0777 [1] BOLT (M24X3X143-MM)  
17. 6V-7676 M [1] NUT (M24X3-THD)  
18. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
19. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760413
 

227-3890: CYLINDER & MTG GP-TILT

227-3890 CYLINDER & MTG GP-TILT -MIXING CHAMBER
S/N ASW1-504
PART OF 225-3867 HYDRAULIC AR-AUXILIARY
i02195810 KEBP0276
2273890 CYLINDER & MTG GP-TILT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
2. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
3. 101-7638 [2] VALVE GP-CHECK (MIXING CHAMBER TILT CYLINDER)  
4. 247-8208 Y [1] CYLINDER GP-HYDRAULIC (MIXING CHAMBER TILT)  
5. 148-8371 [1] ELBOW AS  
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
8. 7X-0431 [2] BOLT (1-1/4-7X6-IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760414
 

227-3890: CYLINDER & MTG GP-TILT

227-3890 CYLINDER & MTG GP-TILT -MIXING CHAMBER
S/N ASW505-UP
PART OF 225-3867 HYDRAULIC AR-AUXILIARY
i05261681 KEBP0276
2273890 CYLINDER & MTG GP-TILT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2J-5997 [2] LOCKNUT (1-1/4-7-THD)  
2. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
3. 101-7638 [2] VALVE GP-CHECK (MIXING CHAMBER TILT)  
4. 247-8208 Y [1] CYLINDER GP-HYDRAULIC  
5. 7X-0431 [2] BOLT (1-1/4-7X6-IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760415
 

086-9600: CYLINDER GP-HYDRAULIC

086-9600 CYLINDER GP-HYDRAULIC -HOOD TILT
S/N ASW1-UP
50.8-MM (2-IN) BORE X 222.3-MM (8.75-IN) STROKE
PART OF 251-6156 CYLINDER & MTG GP-HOOD TILT
i00462167 KEBP0276
0869600 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 103-6151 [2] VALVE (LOCK)  
2. 9S-8001 [1] PLUG  
3. 5D-1986 [1] LOCKNUT (7/8-14-THD)  
4. 116-8707 J [2] SEAL-PISTON  
5. 1H-9696 J [1] SEAL-O-RING  
6. 1S-0670 J [1] RING-BACKUP  
7. 183-4425 [1] WIRE-LOCK  
8. 167-2295 J [1] SEAL-U-CUP  
9. 1G-6226 J [1] WIPER  
10. 6F-6672 J [1] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  101-3697 J [1] KIT-SEAL (HOOD TILT CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#KEBP02760416
 

203-4379: CYLINDER GP-HYDRAULIC

203-4379 CYLINDER GP-HYDRAULIC -ROTOR LIFT, LH
S/N ASW1-UP
101.6-MM (4-IN) BORE X 698.5-MM (27.5-IN) STROKE
PART OF 231-6160 CYLINDER & MTG GP-LIFT
i01830130 KEBP0276
2034379 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6667 [1] LOCKNUT (1-1/2-12-THD)  
2. 5F-0149 J [1] SEAL-O-RING  
3. 5J-3934 J [1] RING-BACKUP  
4. 4T-0415 J [1] WIPER-ROD  
5. 9M-1328 [1] BEARING-SELF-ALIGNING  
6. 6H-9049 [1] FITTING (1/8-27 PTF)  
7. 321-6281 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  224-5524 J [1] KIT-SEAL (ROTOR LIFT, LH)  
    (INCLUDES RING WEAR, SEAL-O-RINGS, AQ SEAL, U-CUP & ALSO PARTS MARKED J IN THE GRAPHICS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#KEBP02760417
 

203-4380: CYLINDER GP-HYDRAULIC

203-4380 CYLINDER GP-HYDRAULIC -ROTOR LIFT, RH
S/N ASW1-UP
101.6-MM (4-IN) BORE X 698.5-MM (27.5-IN) STROKE
PART OF 231-6160 CYLINDER & MTG GP-LIFT
i01830247 KEBP0276
2034380 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6667 [1] LOCKNUT (1-1/2-12-THD)  
2. 5F-0149 J [1] SEAL-O-RING  
3. 5J-3934 J [1] RING-BACKUP  
4. 4T-0415 J [1] WIPER-ROD  
5. 9M-1328 [1] BEARING-SELF-ALIGNING  
6. 6H-9049 [1] FITTING (1/8-27 PTF)  
7. 321-6281 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  224-5524 J [1] KIT-SEAL (ROTOR LIFT, RH)  
  J   KIT MARKED J, SERVICES PART(S) MARKED J & PARTS MARKED J IN GRAPHIC
 

#KEBP02760418
 

204-5734: CYLINDER GP-HYDRAULIC

204-5734 CYLINDER GP-HYDRAULIC -MIXING CHAMBER REAR DOOR
S/N ASW1-UP
63.5MM (2.5 IN) BORE X 415MM (16.35 IN) STROKE
PART OF 231-6159 CYLINDER & MTG GP-DOOR
i01858190 KEBP0276
2045734 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-6711 J [1] SEAL-O-RING  
2. 030-3239 J [1] RING-BACKUP  
3. 6H-9049 [2] FITTING (1/8-27 PTF)  
4. 2D-8652 [2] BEARING  
5. 5J-6795 J [1] WIPER-ROD  
7. 6V-9746 J [1] SEAL-O-RING  
8. 5D-1986 [1] LOCKNUT (7/8-14-THD)  
9. JZ [1] SEAL  
10. JZ [1] SEAL-O-RING  
11. JZ [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  225-0379 J [1] KIT-SEAL (MIXING CHAMBER REAR DOOR)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Z   NOT SERVICED SEPARATELY
 

#KEBP02760419
 

230-7997: CYLINDER GP-HYDRAULIC

230-7997 CYLINDER GP-HYDRAULIC -MIXING CHAMBER FRONT DOOR
S/N ASW1-UP
63.5-MM (2.5-IN) BORE X 177-MM (7-IN) STROKE
PART OF 231-6158 CYLINDER & MTG GP-DOOR
Type 1
i02196496 KEBP0276
2307997 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5D-1986 [1] LOCKNUT (7/8-14-THD)  
2. JZ [1] SEAL-O-RING  
3. 5E-8632 [1] RING  
4. 5E-8607 [2] BUSHING-TERMINAL  
5. JZ [1] RING-WEAR  
6. JZ [1] SEAL-CAP  
7. JZ [1] SEAL-O-RING  
8. JZ [1] SEAL-O-RING  
9. JZ [1] RING-BACKUP  
10. JZ [1] SEAL-U-CUP  
11. JZ [1] WIPER  
   
    AVAILABLE REPAIR KIT(S):
  255-9177 J [1] KIT-SEAL (MIXING CHAMBER FRONT DOOR CYL)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  Z   NOT SERVICED SEPARATELY
 

Information:

Operation and Maintenance Manual
Mixing Chamber Door Cylinder Ends (Rear) - Lubricate
RM-500 Soil Stabilizer
Mixing Chamber Door Cylinder Ends (Front) - Lubricate - If Equipped
RM-500 Soil Stabilizer
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Hydraulic Cylinder (Rear Steering)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Tilt)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Rotor Lift)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Rear Door)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Front Door)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Front Steering)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Cab Slide)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Hood Tilt)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Rotor Lift)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Rear Steering)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Hydraulic Cylinder
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cab Slide Pressure - Test and Adjust
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Hydraulic Cylinder (Rotor Lift) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Rear Door) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Front Door) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Mixing Chamber Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Rear Steering) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Hood Tilt) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Front Steering) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Hydraulic Cylinder (Cab Slide) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog RM-500 :

CYLINDER & MTG GP-HYDRAULIC
426-0874 CYLINDER & MTG GP-HYDRAULIC
CYLINDER & MTG GP-HOOD TILT
251-6156 CYLINDER & MTG GP-HOOD TILT
CYLINDER & MTG GP-HOOD TILT
251-6156 CYLINDER & MTG GP-HOOD TILT
CYLINDER & MTG GP-DOOR
231-6159 CYLINDER & MTG GP-DOOR
CYLINDER & MTG GP-DOOR
231-6158 CYLINDER & MTG GP-DOOR
CYLINDER & MTG GP-CAB SLIDE
231-6161 CYLINDER & MTG GP-CAB SLIDE
STEERING COLUMN GP-ADJUSTABLE
252-6881 STEERING COLUMN GP-ADJUSTABLE
PUMP GP-VANE
251-6421 PUMP GP-VANE
CYLINDER & MTG GP-LIFT
231-6160 CYLINDER & MTG GP-LIFT
CYLINDER & MTG GP-LIFT
231-6160 CYLINDER & MTG GP-LIFT
CYLINDER & MTG GP-TILT
227-3890 CYLINDER & MTG GP-TILT
CYLINDER & MTG GP-TILT
227-3890 CYLINDER & MTG GP-TILT
CYLINDER GP-HYDRAULIC
086-9600 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
203-4379 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
203-4380 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
204-5734 CYLINDER GP-HYDRAULIC

Truck sale:

Caterpillar RM-500
 
Caterpillar RM-500
- stabilizers / reclaimers
BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar RM500B, stabilizers / reclaimers, Construction
527,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction
- stabilizers / reclaimers
BLANCHARD MACHINERY CO.
 
152,369 
Caterpillar RM-500, stabilizers / reclaimers, Construction


 
427,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction


 
445,000 
Caterpillar RM500B, stabilizers / reclaimers, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.