AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

228-3266 CASE & COVER GP-CHAIN DRIVE -LH S/N ASW1-UP PART OF 228-3267 CASE GP-CHAIN DRIVE RM-500 RECLAIMER MIXER


IMPLEMENTS
CASE GP-CHAIN DRIVE
TRANSMISSION GP
CHAMBER GP

RECLAIMER MIXER RM-500 RECLAIMER MIXER ASW
 RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine KEBP0276 RM-500 ASW   (2006)

IMPLEMENTS

CASE GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
228-3265 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
228-3266 CASE & COVER GP-CHAIN DRIVE
CASE GP-CHAIN DRIVE
228-3267 CASE GP-CHAIN DRIVE
DRIVE GP-CHAIN
233-3686 DRIVE GP-CHAIN
LUBRICATION GP-ROTOR DRIVE
249-2708 LUBRICATION GP-ROTOR DRIVE
LUBRICATION GP-ROTOR DRIVE
249-2708 LUBRICATION GP-ROTOR DRIVE
SHAFT GP-ROTOR STUB
250-9929 SHAFT GP-ROTOR STUB
 

#KEBP02760510
 

228-3266: CASE & COVER GP-CHAIN DRIVE

228-3266 CASE & COVER GP-CHAIN DRIVE -LH
S/N ASW1-UP
PART OF 228-3267 CASE GP-CHAIN DRIVE
i02197896 KEBP0276
2283266 CASE & COVER GP-CHAIN DRIVE Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
2. 8M-9307 [2] PLUG  
3. 9B-3523 [1] BUSHING  
4. 9G-5127 [1] BREATHER (ATMOSPHERIC)(CHAIN DRIVE CASE)  
5. 109-4248 [1] PLATE  
6. 109-4249 [1] GASKET  
7. 151-2696 [1] COVER  
8. 526-2069 [1] CASE AS (LH)  
9. 231-2944 [3] PLATE  
10. 233-3682 [3] PLATE  
11. 240-4752 [1] SEAL-LIP TYPE  
12. 252-5094 [1] BUSHING  
13. 030-7571 [8] BOLT (3/8-16X1-IN)  
14. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4195 M [28] BOLT (M10X1.5X30-MM)  
16. 9P-8899 [1] BEARING  
  M   METRIC PART
 

#KEBP02760511
 

228-3267: CASE GP-CHAIN DRIVE

228-3267 CASE GP-CHAIN DRIVE
S/N ASW1-UP
PART OF 225-3871 ROTOR DRIVE AR
i02197955 KEBP0276
2283267 CASE GP-CHAIN DRIVE Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-3265 Y [1] CASE & COVER GP-CHAIN DRIVE (RH)  
2. 228-3266 Y [1] CASE & COVER GP-CHAIN DRIVE (LH)  
3. 233-3686 Y [1] DRIVE GP-CHAIN  
4. 249-2708 Y [2] LUBRICATION GP-ROTOR DRIVE  
5. 249-7891 [1] BAR AS  
6. 250-9929 Y [2] SHAFT GP-ROTOR STUB  
7. 8T-4123 [26] WASHER (22X35X3.5-MM THK)  
8. 8T-4187 M [26] BOLT (M20X2.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760512
 

270-0330: CASE GP-ROTOR TRANSMISSION

270-0330 CASE GP-ROTOR TRANSMISSION
S/N CXN1-349
PART OF 270-0331 TRANSMISSION AR-ROTOR
i02322040 KEBP0276
2700330 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-1776 Y [1] CASE GP-ROTOR TRANSMISSION  
2. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
3. 9S-4185 [2] PLUG (3/4-16-THD)  
4. 3K-0360 [2] SEAL-O-RING  
5. 9S-6130 [1] PLUG  
6. 2S-4078 [2] SEAL-O-RING  
7. 0S-1594 [4] BOLT (3/8-16X1-IN)  
8. 2H-6338 [1] SEAL-O-RING  
9. 1P-3262 [1] COVER  
10. 8S-9129 [1] FILTER-MAGNETIC  
11. 8S-9130 [1] SCREEN-SUCTION  
12. 4S-6679 [1] ADAPTER  
13. 9W-7189 Y [1] VALVE GP-FLOW CONTROL (PLANETARY CASE)  
14. 6V-6228 [2] SEAL-O-RING  
15. 148-1928 [1] VALVE-RELIEF (PLANETARY CASE)  
16. 9X-4609 [1] SEAL-O-RING  
17. 9G-5127 [1] BREATHER (ATMOSPHERIC)(PLANETARY CASE)  
18. 9H-0846 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760513
 

270-0330: CASE GP-ROTOR TRANSMISSION

270-0330 CASE GP-ROTOR TRANSMISSION
S/N CXN350-UP
PART OF 270-0331 TRANSMISSION AR-ROTOR
i02938430 KEBP0276
2700330 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-1776 Y [1] CASE GP-ROTOR TRANSMISSION  
2. 3M-7045 [1] PLUG (3/4-14 NPT-THD)  
3. 307-2670 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
4. 326-0316 [1] PLUG AS  
  9S-6130 [1] PLUG  
  228-7096 [1] SEAL-O-RING  
5. 4H-6112 [1] BREATHER (TRANSMISSION)  
6. 9X-4609 [1] SEAL-O-RING  
7. 0S-1594 [4] BOLT (3/8-16X1-IN)  
8. 2H-6338 [1] SEAL-O-RING  
9. 1P-3262 [1] COVER  
10. 8S-9129 [1] FILTER-MAGNETIC (TRANSMISSION OIL)  
11. 8S-9130 [1] SCREEN-SUCTION (TRANSMISSION OIL)  
12. 329-5453 [1] ADAPTER AS  
  4S-6679 [1] ADAPTER  
  228-7096 [1] SEAL-O-RING  
13. 9W-7189 Y [1] VALVE GP-FLOW CONTROL (TRANSMISSION)  
14. 6V-6228 [2] SEAL-O-RING  
15. 148-1928 [1] VALVE-RELIEF (TRANSMISSION)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760514
 

8E-1776: CASE GP-ROTOR TRANSMISSION

8E-1776 CASE GP-ROTOR TRANSMISSION
S/N CXN1-325
PART OF 270-0330 CASE GP-ROTOR TRANSMISSION
i02438397 KEBP0276
8E1776 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7432 [1] RING  
2. 5H-5672 [2] SEAL-O-RING  
3. 6D-7013 [2] COVER  
4. 7X-0345 [8] BOLT (5/8-11X1.75-IN)  
5. 8E-1777 [1] SLEEVE  
 

#KEBP02760515
 

8E-1776: CASE GP-ROTOR TRANSMISSION

8E-1776 CASE GP-ROTOR TRANSMISSION
S/N CXN326-UP
PART OF 270-0330 CASE GP-ROTOR TRANSMISSION
i02910439 KEBP0276
8E1776 CASE GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-7432 [1] RING  
2. 1U-8846 BC SEALANT-GASKET  
3. 318-4229 C [2] COVER  
4. 8T-9393 C [8] BOLT (5/8-11X1.5-IN)  
5. 8E-1777 [1] SLEEVE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#KEBP02760516
 

231-4222: CHAMBER GP-MIXING

231-4222 CHAMBER GP-MIXING
S/N ASW1-116
PART OF 225-3873 CHASSIS AR
i02198039 KEBP0276
2314222 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 191-4455 [2] ANGLE  
14. 192-1895 [2] HUB  
15. 195-0993 [1] CHAIN  
16. 215-6320 [2] SCREW  
17. 231-4188 [1] CHAMBER AS  
18. 231-4209 [2] DISC  
19. 231-4220 [1] DOOR AS-FRONT (MIXING CHAMBER)  
20. 231-4563 [1] DOOR AS-REAR (MIXING CHAMBER)  
21. 240-1728 [2] BAR  
22. 241-0111 [2] BLOCK  
23. 250-4626 [1] POINTER  
24. 250-4627 [1] CABLE  
25. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
30. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
37. 7X-0368 [1] BOLT (3/4-10X3-IN)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
47. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
  M   METRIC PART
 

#KEBP02760517
 

231-4222: CHAMBER GP-MIXING

231-4222 CHAMBER GP-MIXING
S/N ASW117-261
PART OF 225-3873 CHASSIS AR
i02305854 KEBP0276
2314222 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 [2] ANGLE AS  
14. 192-1895 [2] HUB  
15. 195-0993 [1] CHAIN  
16. 215-6320 [2] SCREW  
17. 267-3528 C [1] CHAMBER AS  
18. 231-4209 [2] DISC  
19. 267-3527 C [1] DOOR AS-FRONT (MIXING CHAMBER)  
20. 231-4563 [1] DOOR AS-REAR (MIXING CHAMBER)  
21. 240-1728 [2] BAR  
22. 241-0111 [2] BLOCK  
23. 250-4626 [1] POINTER  
24. 250-4627 [1] CABLE  
25. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
30. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
37. 7X-0368 [1] BOLT (3/4-10X3-IN)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
47. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 C [1] FILM-INFORMATION (HEIGHT SCALE)(SCREED)  
52. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP02760518
 

231-4222: CHAMBER GP-MIXING

231-4222 CHAMBER GP-MIXING
S/N ASW262-UP
PART OF 225-3873 CHASSIS AR
Type 1
i03613144 KEBP0276
2314222 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 [2] ANGLE AS  
14. 192-1895 [2] HUB  
16. 215-6320 [2] SCREW  
17. 331-0730 C [1] CHAMBER AS  
18. 231-4209 [2] DISC  
19. 267-3527 [1] DOOR AS-FRONT (MIXING CHAMBER)  
20. 330-5126 C [1] DOOR AS-REAR (MIXING CHAMBER)  
21. 240-1728 [2] BAR  
22. 241-0111 [2] BLOCK  
23. 250-4626 [1] POINTER  
24. 250-4627 [1] CABLE  
25. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 [1] FILM-INFORMATION (HEIGHT SCALE)  
52. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
53. 8T-4132 CM [1] NUT (M16X2-THD)  
54. 270-3645 C [1] BAR  
55. 7X-2558 CM [1] BOLT (M16X2X150-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP02760519
 

231-4222: CHAMBER GP-MIXING

231-4222 CHAMBER GP-MIXING
S/N ASW262-UP
PART OF 225-3873 CHASSIS AR
Type 2
i03637809 KEBP0276
2314222 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 [2] ANGLE AS  
    (EACH INCLUDES)
  102-2868 [1] GRIP-HANDLE  
14. 419-9443 [2] HUB  
16. 215-6320 [2] SCREW  
17. 331-0730 [1] CHAMBER AS  
18. 231-4209 [2] DISC  
19. 267-3527 [1] DOOR AS-FRONT (MIXING CHAMBER)  
20. 330-5126 [1] DOOR AS-REAR (MIXING CHAMBER)  
21. 240-1728 [2] BAR  
22. 241-0111 [2] BLOCK  
23. 250-4626 [1] POINTER  
24. 250-4627 [1] CABLE  
25. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 [1] FILM-INFORMATION (HEIGHT SCALE)  
52. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
54. 270-3645 [1] BAR  
55. 7X-2558 M [1] BOLT (M16X2X150-MM)  
56. 198-0683 [2] PLUG-PIPE  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Rotor Chain Drive Case Oil - Change
RM-500 Soil Stabilizer
Rotor Chain Drive Case Oil Level - Check
RM-500 Soil Stabilizer
Rotor Service Locks
RM-500 Soil Stabilizer
Special Instruction
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635}
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608, 5634, 6635}
Procedure to Rework the Rotor Chain Case on Certain Rotary Mixers {5631}
Procedure to Rework the Rotor Chain Case on Certain Rotary Mixers {5631}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING ROTOR DRIVE CHAIN CASES TO PREVENT PREMATURE CHAIN BREAKAGE ON CERTAIN RM500 AND RM500B ROTARY MIXERS
PRODUCT SUPPORT PROGRAM FOR REWORKING ROTOR DRIVE CHAIN CASES TO PREVENT PREMATURE CHAIN BREAKAGE ON CERTAIN RM500 AND RM500B ROTARY MIXERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Chain Drive (Rotor)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Chain Drive Case and Cover (Rotor)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING ROTOR DRIVE CHAIN CASES TO PREVENT PREMATURE CHAIN BREAKAGE ON CERTAIN RM500 AND RM500B ROTARY MIXERS
PRODUCT SUPPORT PROGRAM FOR REWORKING ROTOR DRIVE CHAIN CASES TO PREVENT PREMATURE CHAIN BREAKAGE ON CERTAIN RM500 AND RM500B ROTARY MIXERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Chain Drive (Rotor) - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Rotor Chain Case - Remove and Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Magazine
A New Procedure for Removal of Chain Case and Bearing Housing is Available for Reclaimer Mixers {5608, 5634, 6635}
2007/12/31
A New Retaining Pin Should Be Used When the Master Link is Reassembled on the RM-500 Road Reclaimer/Soil Stabilizer {5631}
2010/01/06
A New Procedure Is Now Used for the Replacement of the Lip Type Seal on the Chain Case Bore on Certain Road Reclaimers/Soil Stabilizers {5608}
2013/06/04
A Procedure to Rework the Rotor Chain Case Is Used on Certain Rotary Mixers {5608}
A Procedure to Rework the Rotor Chain Case Is Used on Certain Rotary Mixers {5608}

Caterpillar Parts SIS Catalog RM-500 :

CASE & COVER GP-CHAIN DRIVE
228-3265 CASE & COVER GP-CHAIN DRIVE
BIT AS-CUTTER
292-5103 BIT AS-CUTTER
BIT AS-CUTTER
283-1023 BIT AS-CUTTER
BIT AS-CUTTER
227-7340 BIT AS-CUTTER
BIT AS-CUTTER
222-7571 BIT AS-CUTTER
BIT AS-CUTTER
113-0312 BIT AS-CUTTER
BAR GP-BREAKER
112-2388 BAR GP-BREAKER
VALVE GP-SOLENOID
3E-6269 VALVE GP-SOLENOID
CASE GP-CHAIN DRIVE
228-3267 CASE GP-CHAIN DRIVE
CASE GP-ROTOR TRANSMISSION
270-0330 CASE GP-ROTOR TRANSMISSION
CASE GP-ROTOR TRANSMISSION
270-0330 CASE GP-ROTOR TRANSMISSION
CASE GP-ROTOR TRANSMISSION
8E-1776 CASE GP-ROTOR TRANSMISSION
CASE GP-ROTOR TRANSMISSION
8E-1776 CASE GP-ROTOR TRANSMISSION
CHAMBER GP-MIXING
231-4222 CHAMBER GP-MIXING
CHAMBER GP-MIXING
231-4222 CHAMBER GP-MIXING
CHAMBER GP-MIXING
231-4222 CHAMBER GP-MIXING

Truck sale:

Caterpillar RM-500
 
Caterpillar RM-500
- stabilizers / reclaimers
BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar RM500B, stabilizers / reclaimers, Construction
527,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction
- stabilizers / reclaimers
BLANCHARD MACHINERY CO.
 
152,369 
Caterpillar RM-500, stabilizers / reclaimers, Construction


 
427,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction


 
445,000 
Caterpillar RM500B, stabilizers / reclaimers, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.