AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

272-6091 ROTOR GP S/N ASW1-UP PART OF 272-6090 ROTOR AR OPTIONAL FIELD REPLACEMENT ORDER 272-6101 STANDOFF AS AN ATTACHMENT RM-500


IMPLEMENTS
ROTOR GP
SHAFT GP-DRIVE
TRANSMISSION GP
SHAFT GP-DRIVE
CASE GP-CHAIN DRIVE
DRIVE GP-ROTOR
LUBRICATION GP-ROTOR DRIVE

RECLAIMER MIXER RM-500 RECLAIMER MIXER ASW
 RM-500 Reclaimer Mixer ASW00001-UP (MACHINE) POWERED BY C15 Engine KEBP0276 RM-500 ASW   (2006)

IMPLEMENTS

ROTOR GP
ROTOR GP
250-3961 ROTOR GP
ROTOR GP
250-3961 ROTOR GP
ROTOR GP
272-6091 ROTOR GP
ROTOR GP
287-1724 ROTOR GP
ROTOR GP
287-1725 ROTOR GP
SUPPORT GP-ROTOR DRIVE
227-5481 SUPPORT GP-ROTOR DRIVE
 

#KEBP02760560
 

272-6091: ROTOR GP

272-6091 ROTOR GP
S/N ASW1-UP
PART OF 272-6090 ROTOR AR
OPTIONAL FIELD REPLACEMENT ORDER 272-6101 STANDOFF AS
AN ATTACHMENT
i02412913 KEBP0276
2726091 ROTOR GP Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 272-6089 [72] HOLDER-TOOTH  
2. 272-6092 [1] ROTOR AS  
  7X-9605 [4] BAR  
  169-1412 [6] BASE  
  272-6101 [66] STANDOFF AS  
    (EACH INCLUDES)
  169-1412 [1] BASE  
3. 272-6095 [3] RING AS (LH)  
    (EACH INCLUDES)
  129-8197 [4] BAR-WEAR  
  241-5880 [1] WEDGE  
  241-5881 [1] WEDGE  
  274-8559 [7] BLOCK-HOLDER  
4. 272-6096 [3] RING AS (RH)  
    (EACH INCLUDES)
  129-8197 [4] BAR-WEAR  
  241-5880 [1] WEDGE  
  241-5881 [1] WEDGE  
  274-8559 [7] BLOCK-HOLDER  
5. 6V-7676 M [30] NUT (M24X3-THD)  
6. 8T-4167 [60] WASHER-HARD (26X44X4-MM THK)  
7. 7X-2489 M [30] BOLT (M24X3X100-MM)  
  M   METRIC PART
 

#KEBP02760561
 

287-1724: ROTOR GP

287-1724 ROTOR GP
S/N ASW1-UP
PART OF 384-1005, 384-1006, 422-0006 DISTRIBUTION AR
AN ATTACHMENT
i02546899 KEBP0276
2871724 ROTOR GP Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 415-3935 [200] BIT AS-CUTTER  
2. 151-9941 [182] HOLDER GP-BIT  
    (EACH INCLUDES)
  5P-8864 [1] BOLT (7/16-14X2-IN-THD)  
  8T-5360 [1] WASHER (12X22.5X2.5-MM THK)  
3. 205-6555 [1] PLATE AS  
4. 205-6556 [1] PLATE AS  
    (EACH PLATE AS INCLUDES)
  7T-5886 [1] DOWEL  
  129-8197 [3] BAR-WEAR  
  169-1412 [2] BASE  
  183-4367 [1] WEDGE  
5. 287-1725 Y [1] ROTOR GP  
6. 8T-4123 [10] WASHER (22X35X3.5-MM THK)  
7. 8T-4131 M [4] NUT (M20X2.5-THD)  
8. 8T-4187 M [4] BOLT (M20X2.5X80-MM)  
9. 8T-6430 M [2] BOLT (M20X2.5X50-MM)  
10. 183-4364 [146] PLATE  
11. 169-1412 [182] BASE  
12. 7R-6187 [18] HOLDER-BIT  
   
  112-2388 FY [1] BAR GP-BREAKER  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760562
 

287-1725: ROTOR GP

287-1725 ROTOR GP
S/N ASW1-UP
PART OF 287-1724 ROTOR GP
AN ATTACHMENT
i02546992 KEBP0276
2871725 ROTOR GP Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-9605 [5] BAR  
2. 129-8197 [6] BAR-WEAR  
3. 169-1412 [40] BASE  
4. 183-4356 [115] FLIGHT AS  
    (EACH INCLUDES)
  169-1412 [1] BASE  
  183-4364 [1] PLATE  
5. 287-5852 [3] PLATE AS  
    (EACH INCLUDES)
  7R-6187 [3] HOLDER-BIT  
  129-8197 [1] BAR-WEAR  
6. 183-4364 [8] PLATE  
7. 183-4366 [10] WEDGE  
8. 183-4367 [10] WEDGE  
9. 183-4368 [6] WEDGE  
10. 211-1977 [9] FLIGHT AS  
    (EACH INCLUDES)
  169-1412 [1] BASE  
  183-4364 [1] PLATE  
11. 211-1978 [10] FLIGHT AS  
    (EACH INCLUDES)
  169-1412 [1] BASE  
  183-4364 [1] PLATE  
12. 211-1979 [4] FLIGHT AS  
    (EACH INCLUDES)
  169-1412 [1] BASE  
  183-4364 [1] PLATE  
13. 287-5853 [3] PLATE AS  
    (EACH INCLUDES)
  7R-6187 [3] HOLDER-BIT  
  129-8197 [1] BAR-WEAR  
14. [1] WEIGHT  
15. [2] WEIGHT  
 

#KEBP02760563
 

7R-5818: SHAFT GP

7R-5818 SHAFT GP -SHIPPING
S/N ASW1-UP
CANNOT BE USED WITH ROTOR
AN ATTACHMENT
i00417529 KEBP0276
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5B-9385 [16] BOLT (1-14X2.5-IN)  
  7X-0408 [8] BOLT (1-8X3.5-IN)  
  6V-8190 [8] NUT (1-8-THD)  
  7R-5815 [1] SHAFT AS-SHIPPING  
  8T-5361 [24] WASHER-HARD (28X49X5-MM THK)  
 

#KEBP02760564
 

8E-1413: SHAFT GP-INPUT

8E-1413 SHAFT GP-INPUT -ROTOR
S/N CXN1-UP
PART OF 270-0331 TRANSMISSION AR-ROTOR
i00412009 KEBP0276
8E1413 SHAFT GP-INPUT Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 [8] BOLT (1/2-13X3-IN)  
2. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 0S-1595 [2] BOLT (1/2-13X1.25-IN)  
4. 1T-0334 [1] BALL BEARING  
5. 8E-1765 [1] CAGE-BEARING  
6. 5K-9065 [1] RING-RETAINING  
7. 6D-7554 [1] RETAINER  
8. 6G-0389 [1] SPIDER  
9. 8E-1764 [1] SHAFT-INPUT  
 

#KEBP02760565
 

228-1659: SHAFT GP-ROTOR DRIVE

228-1659 SHAFT GP-ROTOR DRIVE
S/N ASW1-UP
PART OF 228-1661 SHAFT GP-ROTOR DRIVE
i02197640 KEBP0276
2281659 SHAFT GP-ROTOR DRIVE Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-0888 [2] UNIVERSAL JOINT GP-ROTOR DRIVE  
2. 8T-4910 M [8] BOLT (M12X1.75X60-MM)  
  M   METRIC PART
 

#KEBP02760566
 

228-1661: SHAFT GP-ROTOR DRIVE

228-1661 SHAFT GP-ROTOR DRIVE
S/N ASW1-UP
PART OF 225-3871 ROTOR DRIVE AR
i02197634 KEBP0276
2281661 SHAFT GP-ROTOR DRIVE Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-1659 Y [1] SHAFT GP-ROTOR DRIVE  
2. 0S-0484 [8] BOLT (1/2-20X2.25-IN)  
3. 7X-0448 [10] NUT (5/8-11-THD)  
4. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
5. 8T-4122 [10] WASHER-HARD (17X32X3.5-MM THK)  
6. 470-1910 [10] STUD  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02760567
 

250-9929: SHAFT GP-ROTOR STUB

250-9929 SHAFT GP-ROTOR STUB
S/N ASW1-UP
PART OF 228-3267 CASE GP-CHAIN DRIVE
i02197945 KEBP0276
2509929 SHAFT GP-ROTOR STUB Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5313 [1] SEAL GP (DUO-CONE)  
  7M-0475 [2] RING-SEALING  
2. 139-0574 [1] BEARING-SPHERICAL  
3. 185-2935 [1] HOUSING-SEAL  
4. 250-3487 [1] SHIELD GP-STUB SHAFT  
  3S-0127 [4] BOLT-12 POINT HEAD (3/8-16X2.25-IN)  
5. 250-6872 [1] GUARD AS  
6. 251-2170 [1] SHAFT AS-STUB  
7. 254-5043 [1] HOUSING-BEARING  
8. 3E-6755 [1] SEAL-LIP TYPE  
9. 4K-5175 [16] BOLT-12 POINT HEAD (1/2-13X1.5-IN)  
10. 5B-9385 [8] BOLT (1-14X2.5-IN)  
11. 5P-7213 [16] WASHER-HARD (13.5X20.5X2-MM THK)  
12. 7X-0343 [8] BOLT (5/8-11X1.25-IN)  
13. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
15. 9M-5024 [2] SEAL-O-RING  
 

#KEBP02760568
 

227-5481: SUPPORT GP-ROTOR DRIVE

227-5481 SUPPORT GP-ROTOR DRIVE
S/N ASW1-UP
PART OF 225-3871 ROTOR DRIVE AR
i02197603 KEBP0276
2275481 SUPPORT GP-ROTOR DRIVE Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-1658 [1] COLLAR  
2. 237-7258 B [1] SHIM (1.6-MM THK)  
3. 237-7259 B [1] SHIM (0.8-MM THK)  
4. 261-5691 [1] PLATE AS  
5. 5P-2861 [2] SEAL-O-RING  
6. 8C-6362 [20] BOLT (5/8-11X2.75-IN)  
7. 7X-0513 [20] WASHER-HARD (17X30X5-MM THK)  
8. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
9. 8T-5878 M [8] BOLT (M24X3X80-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP02760569
 

256-6443: TANK GP-OIL

256-6443 TANK GP-OIL -ROTOR DRIVE LUBRICATION
S/N ASW1-UP
PART OF 249-2708 LUBRICATION GP-ROTOR DRIVE
i02199857 KEBP0276
2566443 TANK GP-OIL Parts scheme
  For full view, you need register

Parts for your RM-500 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-2186 [1] CAP  
2. [1] TANK-LUBRICATION  
 

Information:

Operation and Maintenance Manual
Rotor Cutter Bits (Side) - Inspect/Replace
RM-500 Soil Stabilizer
Rotor Lift Cylinder Ends - Lubricate
RM-500 Soil Stabilizer
Rotor Cutter Bits - Inspect/Replace
RM-500 Soil Stabilizer
Rotor Cutter Bits (Side) - Inspect/Replace
RM-500 Soil Stabilizer
Rotor Cutter Bits - Inspect/Replace
RM-500 Soil Stabilizer
Tool Holder - Inspect/Replace
RM-500 Soil Stabilizer
Special Instruction
Procedure to Install Tool Holders on Reclaimer Mixers{6637}
Procedure to Install Tool Holders on Reclaimer Mixers{6637}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Specifications
Rotor Drive Support
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Systems Operation
Rotor
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Electrical System (Rotor Drive)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Rotor Axle
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN ADDITIONAL SOLENOID ON THE ROTOR TILT CIRCUIT ON CERTAIN RM-300 AND RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR BRAKE ON CERTAIN RM-500 RECLAIMER MIXERS
Testing and Adjusting
Brake Valve (Rotor Release) - Check
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Troubleshooting
Solenoid Valve (Rotor Engage) - Test
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System
Solenoid Valve (Rotor Disengage) - Test
RM-300 Reclaimer Mixer and RM-500 Road Reclaimer/Soil Stabilizer Machine Electronic Control System
Disassembly and Assembly
Rotor - Remove
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Rotor - Install
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems
Service Magazine
A New Holder Block is Available for Reclaimers {6637}
2006/04/17
A New Base Standoff is Now Available for Reclaimer Mixers {6636, 6637}
2006/11/27

Caterpillar Parts SIS Catalog RM-500 :

ROTOR GP
250-3961 ROTOR GP
ROTOR GP
250-3961 ROTOR GP
ROTOR GP
229-3181 ROTOR GP
ROTOR GP
121-0040 ROTOR GP
ROTOR GP
121-0039 ROTOR GP
225-3871 ROTOR DRIVE AR
ROTOR AS
229-3182 ROTOR AS
ROTOR AR
272-6090 ROTOR AR
ROTOR GP
287-1724 ROTOR GP
ROTOR GP
287-1725 ROTOR GP
7R-5818 SHAFT GP
SHAFT GP-INPUT
8E-1413 SHAFT GP-INPUT
SHAFT GP-ROTOR DRIVE
228-1659 SHAFT GP-ROTOR DRIVE
SHAFT GP-ROTOR DRIVE
228-1661 SHAFT GP-ROTOR DRIVE
SHAFT GP-ROTOR STUB
250-9929 SHAFT GP-ROTOR STUB
SUPPORT GP-ROTOR DRIVE
227-5481 SUPPORT GP-ROTOR DRIVE

Truck sale:

Caterpillar RM-500
 
Caterpillar RM-500
- stabilizers / reclaimers
BERGERAT MONNOYEUR SP. Z O.O.
Caterpillar RM500B, stabilizers / reclaimers, Construction
527,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction
- stabilizers / reclaimers
BLANCHARD MACHINERY CO.
 
152,369 
Caterpillar RM-500, stabilizers / reclaimers, Construction


 
427,850 
Caterpillar RM500B, stabilizers / reclaimers, Construction


 
445,000 
Caterpillar RM500B, stabilizers / reclaimers, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.