AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

165-3729 MOTOR GP-POWER ADJUSTER 24-VOLT PART OF 165-4722 ADJUSTER GP-POWER AN ATTACHMENT AS2301 ASPHALT SCREED


CONTROLS
MOTOR GP-POWER ADJUSTER
CROWN GP
ELECTRICAL SYSTEM
BOX GP

ASPHALT SCREED AS2301 ASPHALT SCREED AWC
 AS2301 Screed AWC00001-UP KEBP0277 AS2301 AWC   (2003)

CONTROLS

MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
236-0474 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
 

#KEBP02770020
 

165-3729: MOTOR GP-POWER ADJUSTER

165-3729 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 165-4722 ADJUSTER GP-POWER
AN ATTACHMENT
i02198331 KEBP0277
1653729 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 7M-7193 B [1] RACE-THRUST BEARING (3/8IN SHAFT)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 BE SLEEVE  
19. 9L-9184 B [1] RACE-THRUST BEARING (1/2IN SHAFT)  
20. 153-6440 BE TUBE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP02770021
 

236-0474: MOTOR GP-POWER ADJUSTER

236-0474 MOTOR GP-POWER ADJUSTER
24-VOLT
PART OF 197-5278 CROWN GP-POWER
AN ATTACHMENT
i02092601 KEBP0277
2360474 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-6738 [1] MOTOR AS (24-VOLT)  
2. 122-8707 [6] SCREW-HEX (10-16X1-IN)  
3. 171-3716 [1] GASKET-COVER  
4. 9L-9184 [2] RACE-THRUST BEARING  
5. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
6. 077-5077 [2] BUSHING-TERMINAL  
7. 168-2512 [1] SHAFT-IDLER  
8. 1L-0834 [1] BEARING AS-NEEDLE  
9. 171-6787 [2] DOWEL  
10. 123-3683 [2] BUSHING-BRONZE  
11. 123-3684 [2] BUSHING-BRONZE  
12. 171-3711 [1] SHAFT-GEAR  
13. 193-7897 [1] POWERHEAD AS  
14. 153-6440 J TUBE (2.1-DM)  
15. 171-6788 [1] PIN  
16. 168-2166 [1] GASKET-MOTOR  
17. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPACLE AS & WEDGE)
18. 109-0887 E SLEEVE (24-CM EACH)  
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#KEBP02770022
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER -ACTUATED
24-VOLT
PART OF 197-5278 CROWN GP-POWER
AN ATTACHMENT
i02513610 KEBP0277
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP02770023
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER -ACTUATED
24-VOLT
PART OF 165-4722 ADJUSTER GP-POWER
AN ATTACHMENT
i02453264 KEBP0277
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP02770024
 

197-9849: SHAFT GP-DRIVE

197-9849 SHAFT GP-DRIVE -REAR
PART OF 197-5288 CROWN GP
i01447094 KEBP0277
1979849 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & NEEDLE BEARINGS)
2. 193-1311 [1] SHAFT AS  
3. 197-9845 [1] SPINDLE AS  
 

#KEBP02770025
 

197-9850: SHAFT GP-DRIVE

197-9850 SHAFT GP-DRIVE -FRONT
PART OF 197-5288 CROWN GP
i01447105 KEBP0277
1979850 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 193-1312 [1] SPINDLE AS  
 

#KEBP02770026
 

116-4490: BOX GP-EXTENSION

116-4490 BOX GP-EXTENSION
PART OF 197-5283, 231-4650 WIRING GP-SCREED
AN ATTACHMENT
i00483454 KEBP0277
1164490 BOX GP-EXTENSION Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-6854 [1] BOX-EXTENSION  
2. 116-4603 [1] PLATE  
3. 246-8912 [1] SWITCH GP-TOGGLE (FEEDER CONTROL)  
3A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
3B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
3C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
4. 106-3448 [1] HARNESS AS-SCREED (EXTENDER)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-4814 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  2L-8074 [5] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  5P-2321 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
5. 6V-2480 [4] SCREW (4-40X0.5-IN)  
6. 092-4917 [4] WASHER (3.2X14X0.5-MM THK)  
7. 6B-4540 [4] NUT (4-40-THD)  
8. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER WIDTH)  
8A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
8B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
8C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
  D   ORDER BY THE METER
 

#KEBP02770027
 

196-1294: BOX GP-SCREED CONTROL

196-1294 BOX GP-SCREED CONTROL -LH
PART OF 197-5283 WIRING GP-SCREED
AN ATTACHMENT
i01500441 KEBP0277
1961294 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
2. 3V-4694 B [1] PLUG-BUTTON  
3. 5P-7689 B [1] PLUG-BUTTON  
4. 5N-0364 [1] SWITCH AS-TOGGLE (EXTENDER BURNER, LH)  
4A. 5N-0364 [1] SWITCH AS-TOGGLE (MAIN BURNER, LH)  
5. 196-1289 [1] HARNESS AS-PANEL (LH)  
  8T-8729 [33] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8730 [11] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [5] STRAP-CABLE  
  5P-2321 [27] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  7N-7978 [4] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [15] PLUG-SEAL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 9G-0011 [1] SWITCH AS-TOGGLE (SLOPE CONTROL, LH)  
6A. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER CONTROL, LH)  
6B. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT CONTROL, LH)  
6C. 9G-0011 [1] SWITCH AS-TOGGLE (CONVEYOR CONTROL, LH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
7. 196-1302 [1] PLATE (LH)  
8. 196-1306 [1] BOX AS  
9. 204-5038 [1] LATCH  
10. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
11. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
12. 5P-7162 [4] SCREW-MACHINE (10-32X0.5-IN)  
13. 7N-8008 [1] SWITCH AS-TOGGLE (HEIGHT CONTROL, LH)  
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
14. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
15. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
17. 6D-5801 [4] LOCKNUT (8-32-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#KEBP02770028
 

196-1295: BOX GP-SCREED CONTROL

196-1295 BOX GP-SCREED CONTROL -RH
PART OF 197-5283 WIRING GP-SCREED
AN ATTACHMENT
i01500538 KEBP0277
1961295 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
2. 3V-4694 B [1] PLUG-BUTTON  
3. 5P-7689 B [1] PLUG-BUTTON  
4. 5N-0364 [1] SWITCH AS-TOGGLE (EXTENDER BURNER, RH)  
4A. 5N-0364 [1] SWITCH AS-TOGGLE (MAIN BURNER, RH)  
5. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 9D-2868 [1] LENS-RED (FUEL PUMP ON INDICATOR)  
7. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)(FUEL PUMP ON)  
8. 9D-3127 [1] BASE AS-INDICATOR LIGHT (FUEL SUPPLY)  
  6V-8367 M [1] LOCKWASHER (17.88X29.62X1.17-MM THK)  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
9. 196-1290 [1] HARNESS AS-PANEL (RH)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  7N-7978 [9] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  9G-9314 [6] TERMINAL-BLADE (14-GA TO 16-GA)  
  5P-2321 [33] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  8T-8730 [11] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8729 [40] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [8] PLUG-SEAL  
  3S-2093 [4] STRAP-CABLE  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 196-1303 [1] PLATE (RH)  
11. 196-1306 [1] BOX AS  
12. 204-5038 [1] LATCH  
13. 1V-6652 [1] SWITCH AS-TOGGLE (FUEL PUMP CONTROL)  
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
14. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
15. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
16. 4D-1836 [1] SWITCH-TOGGLE (VIBRATORY CONTROL)  
17. 5P-7162 [4] SCREW-MACHINE (10-32X0.5-IN)  
18. 7N-8008 [1] SWITCH AS-TOGGLE (CROWN CONTROL, RH)  
18A. 7N-8008 [1] SWITCH AS-TOGGLE (HEIGHT CONTROL, RH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
19. 9G-0011 [1] SWITCH AS-TOGGLE (EXTENDER CONTROL, RH)  
19A. 9G-0011 [1] SWITCH AS-TOGGLE (SLOPE CONTROL, RH)  
19B. 9G-0011 [1] SWITCH AS-TOGGLE (CONVEYOR CONTROL, RH)  
19C. 9G-0011 [1] SWITCH AS-TOGGLE (TOW POINT CONTROL, RH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
20. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
21. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
22. 6D-5801 [4] LOCKNUT (8-32-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#KEBP02770029
 

229-3131: BOX GP-SCREED CONTROL

229-3131 BOX GP-SCREED CONTROL -LH
PART OF 197-5283, 231-4650 WIRING GP-SCREED
AN ATTACHMENT
i02050047 KEBP0277
2293131 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your AS2301 ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
2. 3V-4694 [3] PLUG-BUTTON  
3. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
4. 196-1302 [1] PLATE (LH)  
5. 196-1306 [1] BOX AS  
6. 204-5038 [1] LATCH  
7. 231-4678 [1] HARNESS AS-PANEL (LH)  
  8T-8729 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [15] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8730 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [5] STRAP-CABLE  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  7N-7978 [5] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  5P-2321 [19] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
9. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
10. 5P-7162 [4] SCREW-MACHINE (10-32X0.5-IN)  
11. 6D-5801 [4] LOCKNUT (8-32-THD)  
12. 7N-8008 [1] SWITCH AS-TOGGLE (SLOPE CONTROL, LH)  
12A. 7N-8008 [1] SWITCH AS-TOGGLE (HEIGHT CONTROL, LH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
13. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
14. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER CONTROL, LH)  
15A. 246-8912 [1] SWITCH GP-TOGGLE (CONVEYOR CONTROL, LH)  
15B. 246-8912 [1] SWITCH GP-TOGGLE (TOW POINT CONTROL, LH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  D   ORDER BY THE METER
 

Information:

Specifications
Power Adjuster Motor Group (Extender Height and Crown)
AS2251 and AS2301 Screeds
Disassembly and Assembly
Power Adjuster Motor Group (Extender Height) - Remove
AS2251 and AS2301
Front Mounted Screed
Power Adjuster Motor Group (Extender Height) - Install
AS2251 and AS2301
Front Mounted Screed
Power Adjuster Motor Group (Extender Height and Crown) - Disassemble
AS2251 and AS2301
Front Mounted Screed
Power Adjuster Motor Group (Extender Height and Crown) - Assemble
AS2251 and AS2301
Front Mounted Screed
Service Magazine
A New Power Adjuster Motor is Now Used on the Asphalt Screeds {5639}
2005/11/07

Caterpillar Parts SIS Catalog AS2301 :

JACK GP-HEIGHT ADJUSTER
196-2503 JACK GP-HEIGHT ADJUSTER
CROWN GP-POWER
197-5278 CROWN GP-POWER
CROWN GP-POWER
197-5278 CROWN GP-POWER
CROWN GP
197-5288 CROWN GP
CONTROL GP-THICKNESS
165-4721 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4720 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4719 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
165-4718 CONTROL GP-THICKNESS
MOTOR GP-POWER ADJUSTER
236-0474 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
197-9849 SHAFT GP-DRIVE
SHAFT GP-DRIVE
197-9850 SHAFT GP-DRIVE
BOX GP-EXTENSION
116-4490 BOX GP-EXTENSION
BOX GP-SCREED CONTROL
196-1294 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
196-1295 BOX GP-SCREED CONTROL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.