AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

245-2922 SLOPER GP-POWER AN ATTACHMENT 10-20B ASPHALT SCREED


CONTROLS
SLOPER GP
ELECTRICAL SYSTEM
BOX GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
HEATER GP

ASPHALT SCREED 10-20B ASPHALT SCREED BWN
 10-20B Screed BWN00001-UP KEBP0279 10-20B BWN   (2003)

CONTROLS

SLOPER GP
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0730 SLOPER GP-MANUAL
SLOPER GP-POWER
245-2922 SLOPER GP-POWER
 

#KEBP02790030
 

245-2922: SLOPER GP-POWER

245-2922 SLOPER GP-POWER
AN ATTACHMENT
i02060951 KEBP0279
2452922 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-3728 Y [2] MOTOR GP-POWER ADJUSTER (24-VOLT)  
2. 4L-6454 [4] BOLT (3/8-16X1-IN)  
3. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 222-5881 [2] BRACKET AS  
5. 102-2739 [2] KEY-SQUARE  
6. 222-5883 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790031
 

116-4490: BOX GP-EXTENSION

116-4490 BOX GP-EXTENSION
PART OF 229-3122, 243-1850 WIRING GP-SCREED
AN ATTACHMENT
i00483454 KEBP0279
1164490 BOX GP-EXTENSION Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-6854 [1] BOX-EXTENSION  
2. 116-4603 [1] PLATE  
3. 246-8912 [1] SWITCH GP-TOGGLE (FEEDER CONTROL)  
3A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
3B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
3C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
4. 106-3448 [1] HARNESS AS-SCREED (EXTENDER)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-4814 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  2L-8074 [5] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  5P-2321 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)  
5. 6V-2480 [4] SCREW (4-40X0.5-IN)  
6. 092-4917 [4] WASHER (3.2X14X0.5-MM THK)  
7. 6B-4540 [4] NUT (4-40-THD)  
8. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER WIDTH)  
8A. 6T-3631 [2] NUT-HEX (15/32-32-THD)  
8B. 6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
8C. 6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  3L-8187 [3] LOCKWASHER  
  D   ORDER BY THE METER
 

#KEBP02790032
 

229-3131: BOX GP-SCREED CONTROL

229-3131 BOX GP-SCREED CONTROL -LH
PART OF 229-3122, 243-1850 WIRING GP-SCREED
AN ATTACHMENT
i02050047 KEBP0279
2293131 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
2. 3V-4694 [3] PLUG-BUTTON  
3. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
4. 196-1302 [1] PLATE (LH)  
5. 196-1306 [1] BOX AS  
6. 204-5038 [1] LATCH  
7. 231-4678 [1] HARNESS AS-PANEL (LH)  
  8T-8729 [30] PIN-CONNECTOR (16-GA TO 20-GA)  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [15] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8730 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [5] STRAP-CABLE  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  7N-7978 [5] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  5P-2321 [19] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
9. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
10. 5P-7162 [4] SCREW-MACHINE (10-32X0.5-IN)  
11. 6D-5801 [4] LOCKNUT (8-32-THD)  
12. 7N-8008 [1] SWITCH AS-TOGGLE (SLOPE CONTROL, LH)  
12A. 7N-8008 [1] SWITCH AS-TOGGLE (HEIGHT CONTROL, LH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
13. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
14. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER CONTROL, LH)  
15A. 246-8912 [1] SWITCH GP-TOGGLE (CONVEYOR CONTROL, LH)  
15B. 246-8912 [1] SWITCH GP-TOGGLE (TOW POINT CONTROL, LH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  D   ORDER BY THE METER
 

#KEBP02790033
 

229-3132: BOX GP-SCREED CONTROL

229-3132 BOX GP-SCREED CONTROL -RH
PART OF 229-3122, 243-1850 WIRING GP-SCREED
AN ATTACHMENT
i02050048 KEBP0279
2293132 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3D-9718 [1] SWITCH AS-PUSH BUTTON (HORN)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  6V-8832 [1] NUT (5/8-32-THD)  
  9B-7233 [2] LOCKWASHER  
2. 3V-4694 [3] PLUG-BUTTON  
3. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
4. 7N-5876 [1] LAMP (24-VOLT, 0.2-AMPERE)(FUEL PUMP ON)  
5. 9D-2868 [1] LENS-RED (FUEL PUMP ON INDICATOR)  
6. 9D-3127 [1] BASE AS-INDICATOR LIGHT  
  6V-8367 [1] LOCKWASHER  
  6V-8382 [1] NUT-HEX (11/16-27-THD)  
7. 196-1303 [1] PLATE (RH)  
8. 196-1306 [1] BOX AS  
9. 204-5038 [1] LATCH  
10. 231-4679 [1] HARNESS AS-PANEL (RH)  
  8T-8729 [37] PIN-CONNECTOR (16-GA TO 20-GA)  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [8] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8730 [13] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [5] STRAP-CABLE  
  5P-2321 [26] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  9G-9314 [6] TERMINAL-BLADE (14-GA TO 16-GA)  
  7N-7978 [9] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  6V-1614 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11. 1V-6652 Y [1] SWITCH AS-TOGGLE (FUEL PUMP CONTROL)  
12. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
13. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
14. 4D-1836 [1] SWITCH-TOGGLE (VIBRATORY CONTROL)  
15. 5P-7162 [4] SCREW-MACHINE (10-32X0.5-IN)  
16. 6D-5801 [4] LOCKNUT (8-32-THD)  
17. 7N-8008 [1] SWITCH AS-TOGGLE (HEIGHT CONTROL, RH)  
17A. 7N-8008 [1] SWITCH AS-TOGGLE (SLOPE CONTROL, RH)  
17B. 7N-8008 [1] SWITCH AS-TOGGLE (CROWN CONTROL, RH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [6] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [6] SCREW-MACHINE (6-32X0.25-IN)  
18. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
19. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 246-8912 [1] SWITCH GP-TOGGLE (CONVEYOR CONTROL, RH)  
20A. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER CONTROL, RH)  
20B. 246-8912 [1] SWITCH GP-TOGGLE (TOW POINT CONTROL, RH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#KEBP02790034
 

229-3133: BOX GP-SCREED CONTROL

229-3133 BOX GP-SCREED CONTROL
S/N BWN1-2535
PART OF 250-1733 WIRING GP-HEATER
AN ATTACHMENT
i02062344 KEBP0279
2293133 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
2. 9X-8486 [14] SCREW-MACHINE (8-32X0.75-IN)  
3. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
4. 5G-9495 [2] CAP  
5. 6D-5801 [4] LOCKNUT (8-32-THD)  
6. 9U-7133 [1] CAP  
7. 128-4249 [1] LOCKWASHER  
8. 180-9214 [1] NUT (1-11/16-18-THD)  
9. 204-5038 [1] LATCH  
10. 229-3141 [1] HARNESS AS-PANEL  
  3S-2093 [2] STRAP-CABLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
11. 229-3142 [1] PLATE AS  
  4K-9097 [1] NUT-WELD (5/16-18-THD)  
  4L-6454 [1] BOLT (3/8-16X1-IN)  
12. 255-5011 [1] RELAY AS (24-VOLT)(MAIN, LH)  
12A. 255-5011 [1] RELAY AS (24-VOLT)(EXTENDER, LH)  
12B. 255-5011 [1] RELAY AS (24-VOLT)(MAIN, RH)  
12C. 255-5011 [1] RELAY AS (24-VOLT)(EXTENDER, RH)  
13. 229-3145 [1] PANEL GP-CONTROL  
14. 256-9592 [1] BOX AS  
15. 232-6360 [1] RECEPTACLE AS  
16. 232-6369 [1] STRIP-TERMINAL  
17. 239-9483 [1] WIRE AS  
18. 239-9484 [1] WIRE AS  
19. 239-9485 [1] WIRE AS  
20. 239-9486 [1] WIRE AS  
21. 239-9487 [1] WIRE AS  
22. 240-1732 [1] SENSOR AS-CURRENT (EXTENDER, LH)  
22A. 240-1732 [1] SENSOR AS-CURRENT (MAIN, LH)  
22B. 240-1732 [1] SENSOR AS-CURRENT (MAIN, RH)  
22C. 240-1732 [1] SENSOR AS-CURRENT (EXTENDER, RH)  
    (EACH SENSOR AS INCLUDES)
  162-4171 [2] TERMINAL AS (18-GA TO 20-GA)  
23. 067-2551 [1] CLIP  
24. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
25. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
26. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
27. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
29. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
30. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
31. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
32. 256-6968 [1] WIRE AS  
33. 256-1130 [1] PLATE  
34. 168-4511 [4] SCREW-PAN HEAD (10-32X1-IN)  
 

#KEBP02790035
 

306-7442: BOX GP-SCREED CONTROL

306-7442 BOX GP-SCREED CONTROL
S/N BWN2536-2835
PART OF 250-1733 WIRING GP-HEATER
AN ATTACHMENT
i02789866 KEBP0279
3067442 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [10] STRAP-CABLE  
4. 5G-9495 [2] CAP  
5. 6D-5801 [4] LOCKNUT (8-32-THD)  
6. 9U-7133 [1] CAP  
7. 128-4249 [1] LOCKWASHER  
8. 180-9214 [1] NUT (1-11/16-18-THD)  
9. 204-5038 [1] LATCH  
10. 229-3141 [1] HARNESS AS-PANEL  
11. 229-3142 [1] PLATE AS  
  4K-9097 [1] NUT-WELD (5/16-18-THD)  
12. 229-3145 [1] PANEL GP-CONTROL  
  229-3128 [1] PANEL AS  
13. 232-6360 [1] RECEPTACLE AS  
14. 232-6369 [1] STRIP-TERMINAL  
15. 240-1732 [4] SENSOR AS-CURRENT  
    (EACH INCLUDES)
  162-4171 [2] TERMINAL AS (18-GA TO 20-GA)  
16. 255-5011 [4] RELAY AS (24-VOLT)(EXTENDER)  
17. 256-9592 [1] BOX AS  
18. 306-7443 [1] WIRE AS  
19. 306-7444 [1] WIRE AS  
20. 306-7445 [1] WIRE AS  
21. 306-7446 [1] WIRE AS  
22. 306-7447 [1] WIRE AS  
23. 306-7448 [1] WIRE AS  
24. 067-2551 [1] CLIP  
25. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
26. 4B-4274 [8] WASHER (5.5X13X1.2-MM THK)  
27. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
28. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
30. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
31. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
33. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
34. 9X-8486 [14] SCREW-MACHINE (8-32X0.75-IN)  
 

#KEBP02790036
 

348-2399: BOX GP-SCREED CONTROL

348-2399 BOX GP-SCREED CONTROL
S/N BWN2836-UP
PART OF 250-1733 WIRING GP-HEATER
AN ATTACHMENT
i03747033 KEBP0279
3482399 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 5G-9495 [2] CAP  
3. 6D-5801 [4] LOCKNUT (8-32-THD)  
4. 9U-7133 [1] CAP  
5. 128-4249 [1] LOCKWASHER  
6. 180-9214 [1] NUT (1-11/16-18-THD)  
7. 204-5038 [1] LATCH  
8. 229-3145 [1] PANEL GP-CONTROL  
  229-3128 [1] PANEL AS  
9. 232-6369 [1] STRIP-TERMINAL  
10. 256-9592 [1] BOX AS  
11. 306-7448 [1] WIRE AS  
12. 348-2400 [1] PLATE AS  
13. 348-2408 [1] RELAY AS (24-VOLT)(EXTENDER, LH)  
13A. 348-2408 [1] RELAY AS (24-VOLT)(EXTENDER, RH)  
13B. 348-2408 [1] RELAY AS (24-VOLT)(MAIN, LH)  
13C. 348-2408 [1] RELAY AS (24-VOLT)(MAIN, RH)  
13D. 348-2408 [2] RELAY AS (24-VOLT)(TRACTOR)  
14. 348-7047 [1] HARNESS AS-PANEL  
  9X-3401 [18] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [23] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  180-9340 [29] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  162-4171 [5] TERMINAL AS (18-GA TO 20-GA)  
    (EACH INCLUDES)
  5P-1475 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)  
  5P-2321 [1] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  5P-1475 [5] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  9G-3186 [7] TERMINAL-FORK (18-GA TO 22-GA, NO. 8 SCREW)  
15. 348-7048 [1] HARNESS AS-PANEL  
  7T-0093 [9] PIN-CONNECTOR (12-GA TO 14-GA)  
  7G-7919 [7] PLUG-SEAL  
  232-6360 [1] RECEPTACLE AS  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  5P-1477 [8] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)  
  240-1732 [4] SENSOR AS-CURRENT (HEATER CONTROL)  
    (EACH INCLUDES)
  229-3144 [1] SENSOR AS (HEATER CONTROL)  
  5P-3059 [2] TERMINAL-FORK (18-GA TO 22-GA, NO. 6 SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(6-CM)  
16. 348-7128 [2] WIRE AS  
17. 348-7129 [2] WIRE AS  
18. 067-2551 [1] CLIP  
19. 3H-0240 [8] WASHER (5X9.7X0.8-MM THK)  
20. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
21. 4M-0061 [1] BOLT (5/16-18X0.75-IN)  
22. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 5P-7162 [8] SCREW-MACHINE (10-32X0.5-IN)  
24. 7X-3182 [1] BOLT (1/4-28X0.5-IN)  
25. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
27. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
28. 9X-8486 [18] SCREW-MACHINE (8-32X0.75-IN)  
29. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
  E   ORDER BY THE CENTIMETER
 

#KEBP02790037
 

122-9303: BUFFER GP-SENSOR

122-9303 BUFFER GP-SENSOR -MATERIAL HEIGHT
PART OF 196-1298, 196-1299 PANEL GP-ELECTRONIC
AN ATTACHMENT
i00513178 KEBP0279
1229303 BUFFER GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] SENSOR AS-ELECTRONIC  
2. 9X-1813 E SLEEVE (19-CM EACH)  
3. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 186-3736 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
5. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  E   ORDER BY THE CENTIMETER
  Z   NOT SERVICED SEPARATELY
 

#KEBP02790038
 

515-1554: KIT-HEATER

515-1554 KIT-HEATER
FIELD INSTALLATION
i06728437 KEBP0279
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-9383 [32] BOLT (1/2-13X0.75-IN)  
  250-0737 [32] BRACKET  
  349-3009 [4] HEATER AS-SCREED (240-VOLT, 2754-WATT)  
  349-3010 [4] HEATER AS-SCREED (240-VOLT, 1246-WATT)  
    (EACH HEATER AS-SCREED INCLUDES)
  129-7164 [2] RECEPTACLE AS-CONNECTOR (1-PIN)  
  8T-4223 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#KEBP02790039
 

488-3843: KIT-SCREED HEATING ELEMENT

488-3843 KIT-SCREED HEATING ELEMENT
PROVIDES SERVICE REPAIR OF WEAR PARTS
FIELD INSTALLATION
i06512308 KEBP0279
  For full view, you need register

Parts for your 10-20B ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8I-0179 [3] BAR-NOSE  
  8I-0180 [2] BAR-NOSE  
  8I-0182 [2] BAR-NOSE  
  1K-6872 [26] LOCKNUT (1/2-13-THD)  
  6V-8188 [74] NUT (1/2-13-THD)  
  104-2231 [8] NUT-SPRING  
  139-5248 [1] PLATE (RH)  
  139-5249 [1] PLATE (LH)  
  165-3558 [1] PLATE  
  165-3559 [1] PLATE  
  165-3560 [1] PLATE  
  8I-0986 [1] PLATE AS (LH)  
  163-3359 [2] PLATE AS (LH)  
    (EACH INCLUDES)
  5P-0494 [13] STUD-WELD (1/2-13X1.125-IN)  
  163-3360 [2] PLATE AS (RH)  
    (EACH INCLUDES)
  5P-0494 [13] STUD-WELD (1/2-13X1.125-IN)  
  8I-0297 [1] PLATE AS (LH)  
  8I-0300 [1] PLATE AS (RH)  
  8I-0296 [2] PLATE AS (RH)  
  139-5247 [1] PLATE-MAIN  
  107-2784 [8] SCREW-FLAT HEAD (1/2-13X1.5-IN)  
  8I-0890 [4] SHIM (0.064-IN THK)  
  8I-0888 [8] SHIM (0.01-IN THK)  
  8I-0889 [20] SHIM (0.02-IN THK)  
  8I-0185 [24] STUD (1/2-13X2.75-IN)  
  8I-0189 [26] STUD (1/2-13X1.75-IN)  
  8I-0212 [24] STUD (1/2-13X5-IN)  
  5P-1076 [96] WASHER-HARD (13.5X30X4-MM THK)  
 

Information:

Operation and Maintenance Manual
Sloper Jack - Lubricate
10-20B and 8-16B EXTEND A MAT SCREEDS
Special Instruction
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Installation Procedure for the Bushings on the Height Adjusters and on the Extenders{5639}
Specifications
Sloper
10-20B and 8-16B Extend-A-Mat Screed
Manual Sloper
10-20B and 8-16B Extend-A-Mat Screed
Testing and Adjusting
Sloper - Check and Adjust
10-20B and 8-16B Extend-A-Mat Screed
Disassembly and Assembly
Sloper Jack - Disassemble
8-16B and 10-20B
Extend-A-Mat Screed
Sloper Group - Remove and Install
8-16B and 10-20B
Extend-A-Mat Screed
Sloper Jack - Remove
8-16B and 10-20B
Extend-A-Mat Screed
Sloper Jack - Assemble
8-16B and 10-20B
Extend-A-Mat Screed
Sloper Jack - Install
8-16B and 10-20B
Extend-A-Mat Screed
Manual Sloper - Remove and Install
8-16B and 10-20B
Extend-A-Mat Screed

Caterpillar Parts SIS Catalog 10-20B :

SLOPER GP-MANUAL
8I-0730 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SLOPER GP-MANUAL
8I-0214 SLOPER GP-MANUAL
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3729 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
165-3728 MOTOR GP-POWER ADJUSTER
JACK GP-SLOPER
102-2699 JACK GP-SLOPER
BOX GP-EXTENSION
116-4490 BOX GP-EXTENSION
BOX GP-SCREED CONTROL
229-3131 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
229-3132 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
229-3133 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
306-7442 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
348-2399 BOX GP-SCREED CONTROL
BUFFER GP-SENSOR
122-9303 BUFFER GP-SENSOR
515-1554 KIT-HEATER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.