HYDRAULIC SYSTEM
MOTOR GPPOWER TRAIN
PUMP GPHYDRAULIC SYSTEM
PUMP GPTANK GP
HYDRAULIC SYSTEM
MOTOR GP#KEBP02810150
156-9037: MOTOR GP-GEAR
156-9037 MOTOR GP-GEAR -VIBRATORY
S/N C3A1-UP; C3C1-UP
PART OF 255-4074 MOTOR & MTG GP-VIBRATORY
S/N C3A1-UP; C3C1-UP
PART OF 255-4074 MOTOR & MTG GP-VIBRATORY
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02810151
390-0804: MOTOR GP-GEAR
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02810152
260-9096: MOTOR GP-HYDRAULIC
260-9096 MOTOR GP-HYDRAULIC -PROPEL
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4062 MOTOR & MTG GP-PROPEL
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4062 MOTOR & MTG GP-PROPEL
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02810153
260-9840: MOTOR GP-PISTON
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 291-5403 | [1] | KIT-SEAL | |
| (INCLUDES CAPS & O-RING) | ||||
| 2. | 291-5404 | [1] | KIT-SEAL | |
| (INCLUDES O-RINGS) | ||||
| 3. | 305-1867 | [1] | KIT-SEAL | |
| (INCLUDES DUAL RING, GASKET & SEAL) | ||||
| 4. | 330-9092 | [1] | KIT-NUT (WHEEL) | |
| (INCLUDES NUTS) | ||||
| 5. | 330-9093 | [1] | KIT-STUD (WHEEL) | |
| (INCLUDES STUDS) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#KEBP02810154
255-4051: PUMP & MTG GP-PISTON & GEAR
255-4051 PUMP & MTG GP-PISTON & GEAR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3957, 255-3958, 260-1358 HYDRAULIC AR-PROPEL
Type 1
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3957, 255-3958, 260-1358 HYDRAULIC AR-PROPEL
Type 1
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [3] | CAP-DUST (HYDRAULIC RETURN) | |
| 2. | 148-8424 | [1] | TEE AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8T-8902 | [1] | TEE | ||
| 3. | 260-9095 Y | [1] | PUMP GP-PISTON | |
| 4. | 277-3507 Y | [1] | PUMP GP-GEAR | |
| 5. | 110-6349 | [2] | FITTING AS (QUICK DISCONNECT) | |
| 6. | 148-8309 | [1] | ADAPTER AS | |
| 2P-8421 | [1] | ADAPTER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 7. | 148-8317 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-8714 | [1] | CONNECTOR | ||
| 8. | 148-8319 | [1] | CONNECTOR AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8715 | [1] | CONNECTOR | ||
| 9. | 148-8326 | [1] | CONNECTOR AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9872 | [1] | CONNECTOR | ||
| 10. | 148-8328 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8633 | [1] | CONNECTOR | ||
| 11. | 148-8341 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8713 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 12. | 148-8345 | [1] | CONNECTOR AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8638 | [1] | CONNECTOR | ||
| 13. | 148-8367 | [1] | ELBOW AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9850 | [1] | ELBOW | ||
| 14. | 148-8369 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 15. | 148-8378 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 16. | 148-8393 | [1] | ELBOW AS | |
| 6V-9852 | [1] | ELBOW | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 17. | 148-8433 | [1] | TEE AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-9836 | [1] | TEE-SWIVEL | ||
| 18. | 148-8446 | [2] | TEE AS-SWIVEL | |
| (EACH INCLUDES) | ||||
| 6V-9838 | [1] | TEE-SWIVEL | ||
| 7J-9108 | [2] | SEAL-O-RING | ||
| 19. | 160-8758 M | [2] | BOLT-SOCKET HEAD (M10X1.5X55-MM) | |
| 20. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 21. | 3J-7354 | [2] | SEAL-O-RING | |
| 22. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02810155
255-4051: PUMP & MTG GP-PISTON & GEAR
255-4051 PUMP & MTG GP-PISTON & GEAR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3957, 255-3958, 260-1358 HYDRAULIC AR-PROPEL
Type 2
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3957, 255-3958, 260-1358 HYDRAULIC AR-PROPEL
Type 2
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [3] | CAP-DUST (HYDRAULIC RETURN) | |
| 2. | 148-8424 | [1] | TEE AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 8T-8902 | [1] | TEE | ||
| 3. | 260-9095 Y | [1] | PUMP GP-PISTON | |
| 4. | 277-3507 Y | [1] | PUMP GP-GEAR | |
| 5. | 110-6349 | [2] | FITTING AS (QUICK DISCONNECT) | |
| 6. | 148-8309 | [1] | ADAPTER AS | |
| 2P-8421 | [1] | ADAPTER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 7. | 284-2955 C | [1] | FLANGE AS | |
| 8. | 284-2957 C | [1] | FLANGE AS | |
| 9. | 148-8326 | [1] | CONNECTOR AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9872 | [1] | CONNECTOR | ||
| 10. | 148-8328 | [1] | CONNECTOR AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8633 | [1] | CONNECTOR | ||
| 11. | 148-8341 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-8713 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 12. | 284-2956 C | [1] | FLANGE AS | |
| 13. | 148-8367 | [1] | ELBOW AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9850 | [1] | ELBOW | ||
| 14. | 148-8369 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8628 | [1] | ELBOW | ||
| 15. | 148-8378 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 16. | 148-8393 | [1] | ELBOW AS | |
| 6V-9852 | [1] | ELBOW | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 17. | 148-8433 | [1] | TEE AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-9836 | [1] | TEE-SWIVEL | ||
| 18. | 148-8446 | [2] | TEE AS-SWIVEL | |
| (EACH INCLUDES) | ||||
| 6V-9838 | [1] | TEE-SWIVEL | ||
| 7J-9108 | [2] | SEAL-O-RING | ||
| 19. | 160-8758 M | [2] | BOLT-SOCKET HEAD (M10X1.5X55-MM) | |
| 20. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 21. | 3J-7354 | [2] | SEAL-O-RING | |
| 22. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 25. | 8T-0269 CM | [12] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 26. | 9X-8256 C | [12] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP02810156
277-3507: PUMP GP-GEAR
277-3507 PUMP GP-GEAR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4051 PUMP & MTG GP-PISTON & GEAR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4051 PUMP & MTG GP-PISTON & GEAR
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP02810157
260-9095: PUMP GP-PISTON
260-9095 PUMP GP-PISTON
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4051 PUMP & MTG GP-PISTON & GEAR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-4051 PUMP & MTG GP-PISTON & GEAR
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 291-8048 | [1] | KIT-SHAFT | |
| (INCLUDES COVER, SNAP RINGS, O-RING, LIP SEAL, ROLLER BEARING & SHAFT) | ||||
| 2. | 329-7367 J | [1] | KIT-CONTROL | |
| (ALSO INCLUDES PISTON HOUSING, PLUGS, SCREWS, RATCHET, PINS, O-RING, ORIFICE, SWASHPLATE LEVER, WASHERS, GASKET, | ||||
| PISTON AS & BOLT) | ||||
| 3. | 357-6244 J | [1] | KIT-PUMP COVER | |
| (INCLUDES NUT, COVER, WASHERS, O-RING SEAL & SCREWS) | ||||
| 4. | 357-6243 J | [1] | KIT-PUMP COVER | |
| (INCLUDES NUTS, SCREWS, COVER, WASHERS & O-RING SEAL) | ||||
| 5. | 291-8052 | [1] | KIT-SWASHPLATE | |
| (INCLUDES NEEDLES RACES, SWASH PLATE, LEFT NEEDLE CAGE, RIGHT NEEDLE CAGE, CAGE LEADING WIRES, CAGE LEADING PINS, | ||||
| PINS & ELASTIC RINGS) | ||||
| 6. | 291-8053 | [1] | KIT-ROTATOR | |
| (INCLUDES NEEDLES, PISTON AS, SPRINGS, WASHERS, RETAINING RING, PLATE & BALL JOINT) | ||||
| 7. | 291-8054 | [1] | KIT-VALVE | |
| (INCLUDES WASHERS, SCREWS, DISTRIBUTOR, CONNECTOR, O-RINGS, PINS, BUSHING, PLUGS & VALVE) | ||||
| 8. | 291-8055 | [1] | KIT-COVER | |
| (INCLUDES FLANGE SPACER, PINS, WASHERS, SCREWS, O-RINGS & FLANGE) | ||||
| 9. | 291-8057 | [2] | KIT-RELIEF VALVE | |
| (EACH INCLUDES VALVE, BALL VALVE, SPRING, GUIDE & CONICAL SPRING) | ||||
| 10. | 247-3253 | [2] | KIT-VALVE HOUSING | |
| (EACH INCLUDES PLUG & O-RINGS) | ||||
| 11. | 291-8059 | [1] | KIT-SEAL | |
| (INCLUDES SHAFT SEAL, O-RINGS, GASKETS, NUT SEALS, RING & SEAL KIT) | ||||
| 12. | 329-7327 J | [1] | VALVE GP-SOLENOID (PISTON PUMP) | |
| 247-8384 | [1] | CARTRIDGE GP-VALVE | ||
| 291-8060 | [1] | KIT-SEAL | ||
| (INCLUDES RING & O-RINGS) | ||||
| 329-7326 | [1] | COIL | ||
| 13. | 291-8050 | [1] | KIT-PLATE | |
| 14. | 247-8368 N | [1] | KIT-RELIEF VALVE | |
| (INCLUDES SETSCREW, NUT, PLUG, O-RING, WASHER, SPRING & PISTON) | ||||
| J | KIT MARKED J SERVICES PARTS MARKED J | |||
| N | KIT MARKED N SERVICES PART MARKED N | |||
#KEBP02810158
454-7240: PUMP GP-PISTON
454-7240 PUMP GP-PISTON
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 278-1669 VALVE GP-FLUSHING
AN ATTACHMENT
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 278-1669 VALVE GP-FLUSHING
AN ATTACHMENT
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 291-8048 | [1] | KIT-SHAFT | |
| (INCLUDES COVER, SNAP RINGS, O-RING, LIP SEAL, ROLLER BEARING & SHAFT) | ||||
| 2. | 329-7367 J | [1] | KIT-CONTROL | |
| (ALSO INCLUDES PISTON HOUSING, PLUGS, SCREWS, RATCHET, PINS, O-RING, ORIFICE, SWASHPLATE LEVER, WASHERS, GASKET, | ||||
| PISTON AS & BOLT) | ||||
| 3. | 357-6244 J | [1] | KIT-PUMP COVER | |
| (INCLUDES NUT, COVER, WASHERS, O-RING SEAL & SCREWS) | ||||
| 4. | 357-6243 J | [1] | KIT-PUMP COVER | |
| (INCLUDES NUTS, SCREWS, COVER, WASHERS & O-RING SEAL) | ||||
| 5. | 291-8052 | [1] | KIT-SWASHPLATE | |
| (INCLUDES NEEDLES RACES, SWASH PLATE, LEFT NEEDLE CAGE, RIGHT NEEDLE CAGE, CAGE LEADING WIRES, CAGE LEADING PINS, | ||||
| PINS & ELASTIC RINGS) | ||||
| 6. | 291-8053 | [1] | KIT-ROTATOR | |
| (INCLUDES NEEDLES, PISTON AS, SPRINGS, WASHERS, RETAINING RING, PLATE & BALL JOINT) | ||||
| 7. | 291-9372 N | [1] | KIT-VALVE | |
| (ALSO INCLUDES WASHERS, SCREWS, DISTRIBUTOR, CONNECTOR, O-RINGS, PINS, BUSHING, PLUGS & VALVE) | ||||
| 8. | 291-8055 | [1] | KIT-COVER | |
| (INCLUDES FLANGE SPACER, PINS, WASHERS, SCREWS, O-RINGS & FLANGE) | ||||
| 9. | 291-9373 | [1] | KIT-VALVE | |
| (INCLUDES SPRINGS, PISTONS, WASHERS, PIN, PLUGS, HOUSING, ORIFICE, SCREWS & O-RINGS) | ||||
| 10. | 291-8057 | [2] | KIT-RELIEF VALVE | |
| (EACH INCLUDES VALVE, BALL VALVE, SPRING, GUIDE & CONICAL SPRING) | ||||
| 11. | 247-3253 | [2] | KIT-VALVE HOUSING | |
| (EACH INCLUDES PLUG & O-RINGS) | ||||
| 12. | 291-9375 | [1] | KIT-SEAL | |
| (INCLUDES SHAFT SEAL, O-RINGS, GASKETS, NUT SEALS & RINGS) | ||||
| 13. | 454-7238 | [1] | VALVE GP-SOLENOID (PISTON PUMP) | |
| 247-8384 | [1] | CARTRIDGE GP-VALVE | ||
| 291-8060 | [1] | KIT-SEAL | ||
| (INCLUDES RING & O-RINGS) | ||||
| 454-7237 | [1] | COIL | ||
| 14. | 291-8050 | [1] | KIT-PLATE | |
| 15. | 247-8368 N | [1] | KIT-RELIEF VALVE | |
| (INCLUDES SETSCREW, NUT, PLUG, O-RING, WASHER, SPRING & PISTON) | ||||
| J | KIT MARKED J SERVICES PARTS MARKED J | |||
| N | KIT MARKED N SERVICES PART MARKED N | |||
#KEBP02810159
255-3989: TANK GP-HYDRAULIC
255-3989 TANK GP-HYDRAULIC
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3950, 255-3951, 255-4088 CHASSIS AR
S/N C3A1-UP; C3C1-UP; C3D1-UP
PART OF 255-3950, 255-3951, 255-4088 CHASSIS AR
Parts for your CB-334E VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6H-5139 | [1] | PLATE-PRESSURE | |
| 2. | 7H-1447 | [1] | CAP-FILLER (HYDRAULIC TANK) | |
| 3. | 7X-8381 | [1] | STRAINER (HYDRAULIC OIL) | |
| 4. | 8F-8151 | [1] | VALVE-SHUTOFF (HYDRAULIC OIL) | |
| 5. | 9J-3047 | [1] | STRAINER (HYDRAULIC TANK) | |
| 6. | 9Y-9236 | [1] | GAUGE-SIGHT (OIL LEVEL) | |
| 7. | 081-2614 | [1] | BREATHER (HYDRAULIC TANK) | |
| 168-3653 | [1] | ROD | ||
| 8. | 172-6654 | [2] | CLIP | |
| 9. | 184-7245 | [1] | SWITCH GP-TEMPERATURE (HYDRAULIC OIL) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 255-8422 | [1] | TANK AS-HYDRAULIC | |
| 11. | 279-0670 | [1] | ROD | |
| 12. | 148-8318 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8634 | [1] | CONNECTOR | ||
| 13. | 148-8347 | [1] | ELBOW AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9007 | [1] | ELBOW | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 14. | 148-8428 | [1] | TEE AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [2] | SEAL-O-RING | ||
| 6V-8782 | [1] | TEE | ||
| 15. | 148-8433 | [1] | TEE AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-9836 | [1] | TEE-SWIVEL | ||
| 16. | 153-6247 | [1] | CONNECTOR AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 8C-6875 | [1] | CONNECTOR | ||
| 17. | 3G-0361 | [1] | GASKET | |
| 18. | 4B-9782 | [1] | BALL | |
| 19. | 7M-8485 | [1] | SEAL-O-RING | |
| 20. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 23. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 24. | 9H-6454 | [1] | GASKET | |
| 25. | 278-3259 E | SECTION-RUBBER (12-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
MOTOR GP
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Systems Operation
Location of Hydraulic Components (Propel System)
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
Piston Motors (Drum Propel and Wheel Propel)
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
Hydraulic Schematic (Propel System)
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
Gear Motor (Vibratory)
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
Gear Motor (Hydraulic Fan)
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Case Drain Flow for Piston Motor (Drum Propel) - Test
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
CB-334E, CB-334E XW, CB-335E, CB34, CB34XW and CC34 Vibratory Utility Compactors Propel System
Case Drain Flow for Gear Motor (Vibratory) - Test
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
CB-334E, CB-334E XW, CB-335E, CB34 and CB34 XW and CC34 Vibratory Utility Compactor Systems
Disassembly and Assembly
Gear Motor (Vibratory) - Remove
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Gear Motor (Vibratory) - Install
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Gear Motor (Vibratory) - Disassemble
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Gear Motor (Vibratory) - Assemble
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Gear Motor (Hydraulic Fan) - Remove
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
Gear Motor (Hydraulic Fan) - Install
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
Gear Motor (Hydraulic Fan) - Disassemble
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
Gear Motor (Hydraulic Fan) - Assemble
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
CB-334E Series II and
CB-335E Series II
Vibratory Compactors
Engine Supplement
Hydraulic Motor (Propel) - Disassemble
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Hydraulic Motor (Propel) - Assemble
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Hydraulic Motor (Drum Propel) - Remove
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Hydraulic Motor (Drum Propel) - Install
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
CB-334E Series II and CB-335E Series II
Vibratory Compactors
Machine Systems
Service Magazine
Caterpillar Parts SIS Catalog CB-334E :
Truck sale:
CATERPILLAR CB-334E 2004
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
- COMPACTORS
YANCEY BROS CO
Paul Dabbs 770-819-5524, John Gorham 770-819-5154 Tom Tucker 770-819-5204, Luis Castr
CATERPILLAR CB334E 2007
- VIBRATORY DOUBLE DRUM ASPHALT
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -
- VIBRATORY DOUBLE DRUM ASPHALT
EMPIRE MACHINERY CO
1725 South Country Club Drive - Mesa -



