8I-0838 PUMP GP-PISTON -PROPEL S/N B4G1-UP; A5P1-UP PART OF 239-3097 LINES GP-PROPEL Type 1 AP-800D ASPHALT PAVER

8I-0838: PUMP GP-PISTON

8I-0838 PUMP GP-PISTON -PROPEL
S/N B4G1-UP; A5P1-UP
PART OF 239-3097 LINES GP-PROPEL
Type 1

Parts for your AP-800D ASPHALT PAVER:

Pos.	Part No	Qty	Parts name
1.	153-1041	[1]	KIT-PUMP CONTROL (PROPEL PUMP)
2.	5E-8731	[1]	PLATE
3.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
4.	109-7784 J	[9]	PISTON
5.	5E-8771 P	[1]	SEAL-O-RING
6.	6V-8837 M	[10]	BOLT (M6X1X16-MM)
7.	JZ	[1]	CYLINDER BLOCK
8.	Z	[2]	CYLINDER-SERVO
9.	Z	[1]	COVER (SIDE)
10.	Z		HOUSING
11.	5E-8778 NJ	[1]	RING
12.	136-4208 J	[1]	VALVE
13.	5E-8713 NJ	[1]	RETAINER
14.	LZ	[1]	SPRING
15.	5E-8704 NJ	[1]	SPRING
16.	5E-8703 JN	[1]	SPRING-SEAT
17.	5E-8784 JM	[4]	BOLT (M6X1X20-MM)
18.	7R-4229 J	[4]	WASHER (6.4X17X3-MM THK)
19.	LZ	[1]	RETAINER
20.	7R-4227 J	[1]	GUIDE-BEARING
21.	109-7785 J	[4]	SPACER
22.	5E-8702 J	[1]	GUIDE
23.	Z	[1]	SWASHPLATE
24.	6R-1714	[2]	SHIM
25.	5E-8709	[2]	SPRING
26.	3D-2824	[2]	SEAL-O-RING
27.	9S-8008	[2]	PLUG (1-1/16-12-THD)
28.	5E-8765 P	[2]	NUT
29.	132-6697 PM	[6]	BOLT (M8X1.25X20-MM)
30.	1G-7221	[6]	WASHER
31.	6R-1715	[2]	SEAT-SPRING
32.	6R-1716	[1]	LEVELER
33.	5E-8741	[2]	POST-GUIDE
34.	5E-8773	[2]	PIN
35.	3T-0849 M	[1]	BOLT-SOCKET HEAD (M6X1X25-MM)
36.	1G-5755	[1]	PIN
37.	5E-8740	[1]	CAGE-LINK
38.	5E-8738	[1]	SPRING
39.	5E-8715	[1]	LINK
40.	5E-8727	[1]	BEARING
41.	108-3002	[1]	BLOCK-SLIDER
42.	077-8353	[2]	PIN (SPRING)
43.	2K-8198 P	[2]	SEAL-O-RING
44.	5E-8745 P	[2]	RING-PISTON
45.	5E-8767 P	[2]	SEAL-O-RING
46.	8C-3078 P	[2]	SEAL-O-RING
47.	LZ	[1]	VALVE-CHECK
48.	6R-1530 P	[1]	GASKET
49.	8T-9534 M	[6]	BOLT (M6X1X50-MM)
50.	033-6033 H	[1]	SEAL-O-RING
51.	8L-2779 H	[2]	SEAL-O-RING
52.	5P-5600	[1]	SEAL-O-RING
53.	8C-8580 M	[4]	BOLT-SOCKET HEAD (M5X0.8X16-MM)
54.	HZ	[1]	CONTROL-ELECTRICAL
55.	9S-8002	[4]	PLUG (7/16-20-THD)
56.	3J-7354	[4]	SEAL-O-RING
57.	7X-9232	[3]	PLUG-VENT (PROPEL PUMP)
58.	5E-8722	[1]	SHAFT-PUMP
59.	5E-8763	[1]	BEARING-ROLLER
60.	5E-8770 P	[1]	SEAL-O-RING
61.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
62.	5E-8724	[1]	SEAL
63.	5E-8789 P	[1]	SEAL-LIP TYPE
66.	5C-7261 M	[2]	NUT (M8X1.25-THD)
67.	8C-6567 M	[2]	SETSCREW-SOCKET
68.	8T-0106 M	[4]	BOLT (M12X1.75X100-MM)
69.	TZ	[1]	COVER
70.	Z	[1]	PUMP (CHARGE)
71.	Z	[1]	CAP (TAMPER RESISTANT)(END)
72.	5E-8751	[2]	KIT-VALVE
73.	153-1040	[1]	VALVE-PUMP CONTROL
74.	5E-8760	[1]	PLATE-RETAINING
75.	5E-8743	[1]	BUSHING-TERMINAL
76.	5E-8769 P	[1]	SEAL-O-RING
77.	1G-6877	[1]	GASKET
78.	6R-1709	[2]	PLATE-PORT
79.	3H-1156	[1]	PIN
80.	Z	[1]	SHAFT
81.	030-4004	[1]	KEY
82.	5E-9816 P	[2]	SEAL-O-RING
83.	030-4605 P	[2]	SEAL-O-RING
84.	6R-0704	[2]	PLUG-PLASTIC
85.	5E-8750	[1]	TUBE
86.	5E-8764	[1]	NUT (1-5/16-12-THD)
87.	7M-8485	[1]	SEAL-O-RING
88.	9S-4191	[4]	PLUG (9/16-18-THD)
89.	3J-1907	[5]	SEAL-O-RING
90.	Z	[1]	MANIFOLD
91.	Z	[2]	COVER
92.	5P-0060	[4]	BOLT (7/16-14X0.75-IN)
93.	6R-1712	[2]	GASKET
94.	9S-8004	[1]	PLUG (9/16-18-THD)
95.	6V-2315 M	[1]	BOLT (M6X1X35-MM)
96.	8H-5305	[1]	WASHER (0.266X0.5X0.105-IN THK)
97.	6R-1711	[1]	BRACKET
98.	5E-8758	[1]	SPACER
99.	5E-8744	[1]	BEARING
100.	6R-1703	[1]	POPPET
101.	5E-8748	[1]	SPRING
102.	2M-9780 P	[1]	SEAL-O-RING
103.	6R-1704	[1]	PLUG AS
104.	6R-1702	[1]	NUT-SPECIAL (7/8-14-THD)
105.	TZ	[1]	BUSHING
106.	5E-8777	[2]	PLUG

	FPZ	[4]	BOLT
	FPZ	[1]	GASKET

			AVAILABLE REPAIR KIT(S):
	6R-4333 L	[1]	KIT-ORIFICE (PROPEL PUMP)
	5E-8732 J	[1]	KIT-PUMP ROTATING GROUP (ROTATING)(PROPEL PUMP)
	5E-8726 N	[1]	KIT-CYLINDER BLOCK (PROPEL PUMP)
	5E-9172 P	[1]	KIT-SEAL (PROPEL PUMP)
	122-0148 T	[1]	KIT-CHARGE PUMP (PROPEL PUMP)
	1G-9335 H	[1]	KIT-SOLENOID (PUMP CONTROL)(PROPEL PUMP)
	F		NOT SHOWN
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART9S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	P		KIT MARKED P SERVICES PART(S) MARKED P
	T		KIT MARKED T SERVICES PART9S) MARKED T
	Z		NOT SERVICED SEPARATELY

8I-0838: PUMP GP-PISTON

PUMP GP-PISTON

8I-0838 PUMP GP-PISTON -PROPEL
S/N B4G1-UP; A5P1-UP
PART OF 239-3097 LINES GP-PROPEL
Type 2

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-0106 M	[4]	BOLT (M12X1.75X100-MM)
2.	5E-8731	[1]	PLATE
3.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
4.	109-7784	[9]	PISTON
5.	5E-8771	[1]	SEAL-O-RING
6.	6V-8837 M	[10]	BOLT (M6X1X16-MM)
7.	5E-8760	[1]	PLATE-RETAINING
8.	5E-8743	[1]	BUSHING-TERMINAL
9.	5E-8769	[1]	SEAL-O-RING
10.	136-4208	[1]	VALVE
11.	6R-1709	[2]	PLATE-PORT
12.	3H-1156	[1]	PIN
13.	8C-6567 M	[2]	SETSCREW-SOCKET
14.	030-4004	[1]	KEY
15.	5E-9816	[2]	SEAL-O-RING
16.	030-4605	[2]	SEAL-O-RING
17.	6R-0704	[2]	PLUG-PLASTIC
18.	5E-8750	[1]	TUBE
19.	5E-8764	[1]	NUT (1-5/16-12-THD)
20.	7M-8485	[1]	SEAL-O-RING
21.	9S-4191	[4]	PLUG (9/16-18-THD)
22.	3J-1907	[5]	SEAL-O-RING
23.	153-1041	[1]	KIT-PUMP CONTROL (PROPEL PUMP)
24.	5C-7261 M	[2]	NUT (M8X1.25-THD)
25.	5P-0060	[4]	BOLT (7/16-14X0.75-IN)
26.	6R-1712	[2]	GASKET
27.	9S-8004	[1]	PLUG (9/16-18-THD)
28.	6V-2315 M	[1]	BOLT (M6X1X35-MM)
29.	8H-5305	[1]	WASHER (0.266X0.5X0.105-IN THK)
30.	6R-1711	[1]	BRACKET
31.	5E-8758	[1]	SPACER
32.	5E-8744	[1]	BEARING
33.	6R-1703	[1]	POPPET
34.	5E-8748	[1]	SPRING
35.	2M-9780	[1]	SEAL-O-RING
36.	6R-1704	[1]	PLUG AS
37.	6R-1702	[1]	NUT-SPECIAL (7/8-14-THD)
38.	1G-6877	[1]	GASKET
39.	5E-8777	[2]	PLUG
40.	3J-7354	[4]	SEAL-O-RING
41.	9S-8002	[4]	PLUG (7/16-20-THD)
42.	5E-8778	[1]	RING
43.	5E-8713	[1]	RETAINER
44.	5E-8704	[1]	SPRING
45.	5E-8703	[1]	SPRING-SEAT
46.	117-6017 C	[4]	BOLT
47.	1G-9614 C	[1]	SWASHPLATE
48.	175-2784 C	[4]	SPACER
49.	7R-4227	[1]	GUIDE-BEARING
50.	5E-8702	[1]	GUIDE
51.	5E-8738	[1]	SPRING
52.	5E-8715	[1]	LINK
53.	5E-8740	[1]	CAGE-LINK
54.	1G-5755	[1]	PIN
55.	5E-8727	[1]	BEARING
56.	108-3002	[1]	BLOCK-SLIDER
57.	3D-2824	[2]	SEAL-O-RING
58.	9S-8008	[2]	PLUG (1-1/16-12-THD)
59.	5E-8767	[2]	SEAL-O-RING
60.	8C-3078	[2]	SEAL-O-RING
61.	5E-8745	[2]	RING-PISTON
62.	2K-8198	[2]	SEAL-O-RING
63.	077-8353	[2]	PIN (SPRING)
64.	5E-8773	[2]	PIN
65.	5E-8741	[2]	POST-GUIDE
66.	6R-1716	[1]	LEVELER
67.	6R-1715	[2]	SEAT-SPRING
68.	5E-8709	[2]	SPRING
69.	6R-1714	[2]	SHIM
70.	8T-4224 C	[6]	WASHER-HARD (8.8X16X2-MM THK)
71.	132-6697 M	[6]	BOLT (M8X1.25X20-MM)
72.	5E-8765	[2]	NUT
73.	3T-0849 M	[1]	BOLT-SOCKET HEAD (M6X1X25-MM)
74.	7X-9232	[3]	PLUG-VENT (PROPEL PUMP)
75.	6R-1530	[1]	GASKET
76.	8T-9534 M	[6]	BOLT (M6X1X50-MM)
77.	033-6033	[1]	SEAL-O-RING
78.	8L-2779	[2]	SEAL-O-RING
79.	8C-8580 M	[4]	BOLT-SOCKET HEAD (M5X0.8X16-MM)
80.	5P-5600	[1]	SEAL-O-RING
81.	5E-8722	[1]	SHAFT-PUMP
82.	5E-8763	[1]	BEARING-ROLLER
83.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
84.	5E-8770	[1]	SEAL-O-RING
85.	156-9684 C	[1]	KIT-SHAFT SEAL
			(INCLUDES CARRIER SEAL, LIP SEAL & SEAL-O-RING)
86.	5E-8789	[1]	SEAL-LIP TYPE
87.	5E-8751	[2]	KIT-VALVE
			(INCLUDES VALVE & SEAL-O-RINGS)
88.	6R-4333	[1]	KIT-ORIFICE
89.	5E-8732	[1]	KIT-PUMP ROTATING GROUP (ROTATING)
			(INCLUDES SEAT-SPRING, SPRING-BLOCK, RETAINER, RETAINING RING, SLIPPER GUIDE, BEARINGS, SPACERS,
			BOLTS, PISTONS & CYLINDER BLOCK)
90.	5E-8726	[1]	KIT-CYLINDER BLOCK
91.	122-0148	[1]	KIT-CHARGE PUMP
92.	153-1040	[1]	VALVE-PUMP CONTROL
93.	1G-9335	[1]	KIT-SOLENOID (PUMP CONTROL)
			(INCLUDES SEAL-O-RINGS)

			AVAILABLE REPAIR KIT(S):
	5E-9172	[1]	KIT-SEAL

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

8I-0839: PUMP GP-PISTON

PUMP GP-PISTON

8I-0839 PUMP GP-PISTON -PROPEL
S/N B4G1-UP; A5P1-UP
PART OF 239-3097 LINES GP-PROPEL
Type 1

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	153-1041	[1]	KIT-PUMP CONTROL (PROPEL PUMP)
2.	5E-8731	[1]	PLATE
3.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
4.	109-7784 J	[9]	PISTON
5.	5E-8771 P	[2]	SEAL-O-RING
6.	6V-8837 M	[4]	BOLT (M6X1X16-MM)
7.	JZ	[1]	CYLINDER BLOCK
8.	Z	[2]	SLEEVE-SERVO
9.	Z	[1]	COVER-SIDE
10.	Z		HOUSING
11.	5E-8778 NJ	[1]	RING
12.	136-4208 J	[1]	VALVE
13.	5E-8713 NJ	[1]	RETAINER
14.	LZ	[1]	SPRING
15.	5E-8704 NJ	[1]	SPRING
16.	5E-8703 JN	[1]	SPRING-SEAT
17.	5E-8784 JM	[4]	BOLT (M6X1X20-MM)
18.	7R-4229 J	[4]	WASHER (6.4X17X3-MM THK)
19.	LZ	[1]	RETAINER
20.	7R-4227 J	[1]	GUIDE-BEARING
21.	109-7785 J	[4]	SPACER
22.	5E-8702 J	[1]	GUIDE
23.	Z	[1]	SWASHPLATE AS
24.	6R-1714	[2]	SHIM
25.	5E-8709	[2]	SPRING
26.	3D-2824	[2]	SEAL-O-RING
27.	9S-8008	[2]	PLUG (1-1/16-12-THD)
28.	5E-8765 P	[4]	NUT
29.	132-6697 PM	[6]	BOLT (M8X1.25X20-MM)
30.	1G-7221	[6]	WASHER
31.	6R-1715	[2]	SEAT-SPRING
32.	6R-1716	[1]	LEVELER
33.	5E-8741	[2]	POST-GUIDE
34.	5E-8773	[2]	PIN
35.	3T-0849 M	[1]	BOLT-SOCKET HEAD (M6X1X25-MM)
36.	1G-5755	[1]	PIN
37.	5E-8740	[1]	CAGE-LINK
38.	5E-8738	[1]	SPRING
39.	5E-8715	[1]	LINK
40.	5E-8727	[1]	BEARING
41.	108-3002	[1]	BLOCK-SLIDER
42.	077-8353	[2]	PIN (SPRING)
43.	2K-8198 P	[2]	SEAL-O-RING
44.	5E-8745 P	[2]	RING-PISTON
45.	5E-8767 P	[2]	SEAL-O-RING
46.	8C-3078 P	[2]	SEAL-O-RING
47.	LZ	[1]	VALVE-CHECK
48.	6R-1530 P	[1]	GASKET
49.	8T-9534 M	[6]	BOLT (M6X1X50-MM)
50.	033-6033 H	[1]	SEAL-O-RING
51.	8L-2779 H	[2]	SEAL-O-RING
52.	5P-5600 H	[1]	SEAL-O-RING
53.	8C-8580 M	[4]	BOLT-SOCKET HEAD (M5X0.8X16-MM)
54.	HZ	[1]	CONTROL-ELECTRONIC
55.	9S-8002	[4]	PLUG (7/16-20-THD)
56.	3J-7354	[4]	SEAL-O-RING
57.	7X-9232	[3]	PLUG-VENT (PROPEL PUMP)
58.	5E-8722	[1]	SHAFT-PUMP
59.	5E-8763	[1]	BEARING-ROLLER
60.	5E-8770 P	[1]	SEAL-O-RING
61.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
62.	5E-8724	[1]	SEAL
63.	5E-8789 P	[1]	SEAL-LIP TYPE
66.	8C-6567 M	[2]	SETSCREW-SOCKET
67.	8T-0106 M	[4]	BOLT (M12X1.75X100-MM)
68.	6H-1717	[4]	BOLT (1/2-13X1.125-IN)
69.	108-5974	[1]	PUMP-CHARGE
70.	Z	[1]	CAP-END
71.	5E-8751	[2]	KIT-VALVE
72.	153-1040	[1]	VALVE-PUMP CONTROL
73.	ZT	[1]	COVER
74.	5E-8743	[1]	BUSHING-TERMINAL
75.	5E-8769 P	[1]	SEAL-O-RING
76.	1G-6877	[1]	GASKET
77.	6R-1709	[2]	PLATE-PORT
78.	3H-1156	[1]	PIN
79.	6R-1708	[1]	SHAFT
80.	030-4004	[1]	KEY
81.	5E-9816 P	[2]	SEAL-O-RING
82.	030-4605 P	[2]	SEAL-O-RING
83.	6R-0704	[2]	PLUG-PLASTIC
84.	5E-8750	[1]	TUBE
85.	5E-8764	[1]	NUT (1-5/16-12-THD)
86.	7M-8485	[1]	SEAL-O-RING
87.	9S-4191	[4]	PLUG (9/16-18-THD)
88.	3J-1907	[5]	SEAL-O-RING
89.	Z	[1]	MANIFOLD
90.	Z	[2]	COVER
91.	5P-0060	[4]	BOLT (7/16-14X0.75-IN)
92.	6R-1712	[2]	GASKET
93.	9S-8004	[1]	PLUG (9/16-18-THD)
94.	6V-2315 M	[1]	BOLT (M6X1X35-MM)
95.	8H-5305	[1]	WASHER (0.266X0.5X0.105-IN THK)
96.	6R-1711	[1]	BRACKET
97.	5E-8758	[1]	SPACER
98.	5E-8744	[1]	BEARING
99.	6R-1703	[1]	POPPET
100.	5E-8748	[1]	SPRING
101.	2M-9780 P	[1]	SEAL-O-RING
102.	6R-1704	[1]	PLUG AS
103.	6R-1702	[1]	NUT-SPECIAL (7/8-14-THD)
104.	ZT	[1]	BUSHING
105.	5E-8777	[2]	PLUG
106.	6R-1706	[1]	COUPLING
107.	108-5173	[1]	COVER
108.	8C-5237	[1]	SEAL-O-RING
109.	Z	[1]	FLANGE-MOUNTING
110.	108-5174	[4]	WASHER

	FPZ	[4]	BOLT
	FPZ	[1]	GASKET

			AVAILABLE REPAIR KIT(S):
	6R-4333 L	[1]	KIT-ORIFICE (PROPEL PUMP)
	5E-8732 J	[1]	KIT-PUMP ROTATING GROUP (ROTATING)(PROPEL PUMP)
	5E-8726 N	[1]	KIT-CYLINDER BLOCK (PROPEL PUMP)
	5E-9172 P	[1]	KIT-SEAL (PROPEL PUMP)
	108-6165 T	[1]	KIT-COVER (PROPEL PISTON PUMP)
	1G-9335 H	[1]	KIT-SOLENOID (PUMP CONTROL)(PROPEL PUMP)
	F		NOT SHOWN
	H		KIT MARKED H SERVICES PART(S) MARKED H
	J		KIT MARKED J SERVICES PART(S) MARKED J
	L		KIT MARKED L SERVICES PART(S) MARKED L
	M		METRIC PART
	N		KIT MARKED N SERVICES PART(S) MARKED N
	P		KIT MARKED P SERVICES PART(S) MARKED P
	T		KIT MARKED T SERVICES PART(S) MARKED T
	Z		NOT SERVICED SEPARATELY

8I-0839: PUMP GP-PISTON

PUMP GP-PISTON

8I-0839 PUMP GP-PISTON -PROPEL
S/N B4G1-UP; A5P1-UP
PART OF 239-3097 LINES GP-PROPEL
Type 2

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-3413 M	[4]	BOLT-SOCKET HEAD (M12X1.75X120-MM)
2.	5E-8731	[1]	PLATE
3.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M6X1X20-MM)
4.	109-7784	[9]	PISTON
5.	5E-8771	[2]	SEAL-O-RING
6.	6V-8837 M	[4]	BOLT (M6X1X16-MM)
7.	108-6165	[1]	KIT-COVER (PROPEL PISTON PUMP)
8.	5E-8743	[1]	BUSHING-TERMINAL
9.	5E-8769	[1]	SEAL-O-RING
10.	136-4208	[1]	VALVE
11.	6R-1709	[2]	PLATE-PORT
12.	3H-1156	[1]	PIN
13.	108-5975	[1]	SHAFT
14.	030-4004	[1]	KEY
15.	5E-9816	[2]	SEAL-O-RING
16.	030-4605	[2]	SEAL-O-RING
17.	6R-0704	[2]	PLUG-PLASTIC
18.	5E-8750	[1]	TUBE
19.	5E-8764	[1]	NUT (1-5/16-12-THD)
20.	7M-8485	[1]	SEAL-O-RING
21.	9S-4191	[4]	PLUG (9/16-18-THD)
22.	3J-1907	[5]	SEAL-O-RING
23.	6R-1706	[1]	COUPLING
24.	8C-6567 M	[2]	SETSCREW-SOCKET
25.	5P-0060	[4]	BOLT (7/16-14X0.75-IN)
26.	6R-1712	[2]	GASKET
27.	9S-8004	[1]	PLUG (9/16-18-THD)
28.	6V-2315 M	[1]	BOLT (M6X1X35-MM)
29.	8H-5305	[1]	WASHER (0.266X0.5X0.105-IN THK)
30.	6R-1711	[1]	BRACKET
31.	5E-8758	[1]	SPACER
32.	5E-8744	[1]	BEARING
33.	6R-1703	[1]	POPPET
34.	5E-8748	[1]	SPRING
35.	2M-9780	[1]	SEAL-O-RING
36.	6R-1704	[1]	PLUG AS
37.	6R-1702	[1]	NUT-SPECIAL (7/8-14-THD)
38.	1G-6877	[1]	GASKET
39.	5E-8777	[2]	PLUG
40.	3J-7354	[4]	SEAL-O-RING
41.	9S-8002	[4]	PLUG (7/16-20-THD)
42.	5E-8778	[1]	RING
43.	5E-8713	[1]	RETAINER
44.	5E-8704	[1]	SPRING
45.	5E-8703	[1]	SPRING-SEAT
46.	117-6017 C	[4]	BOLT
47.	1G-9614 C	[1]	SWASHPLATE
48.	175-2784 C	[4]	SPACER
49.	7R-4227	[1]	GUIDE-BEARING
50.	5E-8702	[1]	GUIDE
51.	5E-8738	[1]	SPRING
52.	5E-8715	[1]	LINK
53.	5E-8740	[1]	CAGE-LINK
54.	1G-5755	[1]	PIN
55.	5E-8727	[1]	BEARING
56.	108-3002	[1]	BLOCK-SLIDER
57.	3D-2824	[2]	SEAL-O-RING
58.	9S-8008	[2]	PLUG (1-1/16-12-THD)
59.	5E-8767	[2]	SEAL-O-RING
60.	8C-3078	[2]	SEAL-O-RING
61.	5E-8745	[2]	RING-PISTON
62.	2K-8198	[2]	SEAL-O-RING
63.	077-8353	[2]	PIN (SPRING)
64.	5E-8773	[2]	PIN
65.	5E-8741	[2]	POST-GUIDE
66.	6R-1716	[1]	LEVELER
67.	6R-1715	[2]	SEAT-SPRING
68.	5E-8709	[2]	SPRING
69.	6R-1714	[2]	SHIM
70.	8T-4224 C	[6]	WASHER-HARD (8.8X16X2-MM THK)
71.	132-6697 M	[6]	BOLT (M8X1.25X20-MM)
72.	5E-8765	[4]	NUT
73.	3T-0849 M	[1]	BOLT-SOCKET HEAD (M6X1X25-MM)
74.	7X-9232	[3]	PLUG-VENT (PROPEL PUMP)
75.	6R-1530	[1]	GASKET
76.	8T-9534 M	[6]	BOLT (M6X1X50-MM)
77.	033-6033	[1]	SEAL-O-RING
78.	8L-2779	[2]	SEAL-O-RING
79.	8C-8580 M	[4]	BOLT-SOCKET HEAD (M5X0.8X16-MM)
80.	5P-5600	[1]	SEAL-O-RING
81.	5E-8722	[1]	SHAFT-PUMP
82.	5E-8763	[1]	BEARING-ROLLER
83.	1J-6474	[1]	RING-RETAINING (EXTERNAL)
84.	5E-8770	[1]	SEAL-O-RING
85.	156-9684 C	[1]	KIT-SHAFT SEAL
			(INCLUDES CARRIER SEAL, LIP SEAL & SEAL-O-RING)
86.	5E-8789	[1]	SEAL-LIP TYPE
87.	5E-8751	[2]	KIT-VALVE
			(EACH INCLUDES SEAL-O-RINGS & VALVE)
88.	6R-4333	[1]	KIT-ORIFICE
89.	5E-8732	[1]	KIT-PUMP ROTATING GROUP (ROTATING)
			(INCLUDES SEAT-SPRING, SPRING-BLOCK, RETAINER, RING, GUIDE, BEARINGS, SPACERS, BOLTS, PISTONS & CYLINDER BLOCK)
90.	5E-8726	[1]	KIT-CYLINDER BLOCK
91.	108-5974	[1]	PUMP-CHARGE
92.	108-5173	[1]	COVER
93.	1G-9335	[1]	KIT-SOLENOID (PUMP CONTROL)
			(INCLUDES SEAL-O-RINGS & SOLENOID)
94.	153-1040	[1]	VALVE-PUMP CONTROL
95.	8C-5237	[1]	SEAL-O-RING
96.	6H-1717	[4]	BOLT (1/2-13X1.125-IN)
97.	153-1041	[1]	KIT-PUMP CONTROL (PROPEL PUMP)
98.	194-3249 C	[4]	WASHER-SPECIAL

			AVAILABLE REPAIR KIT(S):
	5E-9172	[1]	KIT-SEAL (PROPEL PUMP)
			(INCLUDES SEAL-O-RING, U-CUP, BACKUP SEAL & SEAL WIPER)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

9T-2031: ROTATING GP-PUMP

ROTATING GP-PUMP

9T-2031 ROTATING GP-PUMP
S/N B4G1-UP; A5P1-UP
PART OF 8I-0836 PUMP GP-PISTON

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9T-3868	[1]	KIT-PISTON (PUMP ROTATING GROUP)
			(INCLUDES PISTONS)
2.	9T-3860	[1]	PLATE
3.	9T-3859	[1]	WASHER (1.068X1.139X0.099-MM THK)
4.	9T-3862	[1]	RETAINER
5.	9T-3857	[3]	PIN
6.	9T-3863	[1]	BARREL
7.	9T-3861	[1]	WASHER (1.062X1.58X0.095-MM THK)
8.	9T-3858	[1]	SPRING
9.	9T-3864	[1]	WASHER (1.2X1.58X0.095-MM THK)
10.	004-1683	[1]	RING-SNAP

107-9341: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

107-9341 TANK GP-HYDRAULIC
S/N B4G1-UP; A5P1-UP
PART OF 239-3050 HYDRAULIC AR

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	110-6347 Y	[1]	TANK GP-HYDRAULIC
2.	153-6237	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9004	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
3.	164-5581	[1]	PLUG AS
	6V-9511	[1]	PLUG (1-3/16-12-THD)
	6V-9746	[1]	SEAL-O-RING
4.	124-6300	[1]	PLATE
5.	192-0864	[1]	STEP AS
6.	109-7387 I	[1]	HOSE AS
7.	4W-9972	[1]	SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL)
	6V-8378	[1]	NUT (10-32-THD)
	8F-1434	[1]	LOCKWASHER
	8T-0328	[1]	WASHER-HARD (5.5X10X1-MM THK)
8.	172-8660 Y	[1]	SWITCH GP-LIQUID LEVEL (HYDRAULIC OIL)
9.	3E-7504	[1]	SWITCH GP-TEMPERATURE (HYDRAULIC OIL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	3J-1907	[1]	SEAL-O-RING
11.	2M-9780	[1]	SEAL-O-RING
12.	8T-8919	[2]	BOLT (1/2-13X1.75-IN)
13.	5P-1076	[6]	WASHER-HARD (13.5X30X4-MM THK)
14.	6V-8188	[2]	NUT (1/2-13-THD)
15.	8T-9383	[2]	BOLT (1/2-13X0.75-IN)
16.	4L-6454	[1]	BOLT (3/8-16X1-IN)
17.	7D-7233	[1]	CLIP
18.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
19.	6V-8801	[1]	NUT (3/8-16-THD)
20.	3K-0360	[1]	SEAL-O-RING
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

110-6347: TANK GP-HYDRAULIC

TANK GP-HYDRAULIC

110-6347 TANK GP-HYDRAULIC
S/N B4G1-UP; A5P1-UP
PART OF 107-9341 TANK GP-HYDRAULIC

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-9340	[1]	TANK AS-HYDRAULIC
2.	8I-0943	[1]	GAUGE-SIGHT (HYDRAULIC OIL LEVEL)
3.	8I-0858	[6]	SCREEN-SUCTION (HYDRAULIC TANK)
4.	6V-0852	[1]	CAP-DUST
5.	176-9415 Y	[1]	FILTER GP-OIL (HYDRAULIC TANK)
6.	077-3951 Y	[1]	CAP GP-HYDRAULIC OIL FILLER
7.	107-9430	[1]	COVER AS
8.	6V-8801	[21]	NUT (3/8-16-THD)
9.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	196-3063	[1]	ELBOW
11.	6K-6307	[1]	SEAL-O-RING
12.	6V-8400	[1]	SEAL-O-RING
13.	174-1530	[3]	PLUG AS
			(EACH INCLUDES)
	1N-5998	[1]	PLUG
	6K-6307	[1]	SEAL-O-RING
14.	309-5157	[1]	GASKET
15.		[2]	PLUG AS
			(EACH INCLUDES)
	9S-4183	[1]	PLUG (1-1/16-12-THD)
	3D-2824	[1]	SEAL-O-RING
16.	5M-6755	[6]	SCREW-MACHINE (10-24X0.562-IN)
17.	148-8411	[1]	PLUG AS
	9S-4185	[1]	PLUG (3/4-16-THD)
	3K-0360	[1]	SEAL-O-RING
18.	7X-3387	[1]	VALVE AS-FLUID SAMPLING (HYDRAULIC OIL)
19.	5P-1075	[18]	WASHER-HARD (10.2X22.5X3-MM THK)
20.	236-5924	[1]	GASKET-SEAL
21.	1B-2578	[18]	NUT (3/8-16-THD)
	Y		SEPARATE ILLUSTRATION

250-2990: VALVE & MTG GP-CONTROL

VALVE & MTG GP-CONTROL

250-2990 VALVE & MTG GP-CONTROL -GENERATOR
S/N B4G1-UP; A5P1-UP
PART OF 240-6775 GENERATOR AR
Type 1
AN ATTACHMENT

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[2]	CAP-DUST
2.	116-0118	[1]	CLIP
3.	227-5105 Y	[1]	VALVE GP-CONTROL (GENERATOR)
4.	148-8327	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
5.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
6.	148-8361	[1]	ELBOW AS (90-DEG)
	3J-7354	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9200	[1]	ELBOW
7.	150-3065	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ELBOW
8.	164-5567	[2]	COUPLER AS-QUICK DISCONNECT (MALE)
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
9.	8T-6466 M	[2]	BOLT (M10X1.5X60-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

250-2990: VALVE & MTG GP-CONTROL

VALVE & MTG GP-CONTROL

250-2990 VALVE & MTG GP-CONTROL -GENERATOR
S/N B4G1-UP; A5P1-UP
PART OF 240-6775 GENERATOR AR
Type 2
AN ATTACHMENT

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0852	[2]	CAP-DUST
2.	251-4844 Y	[1]	VALVE GP-CONTROL (GENERATOR)
3.	110-6349	[2]	FITTING AS (QUICK DISCONNECT)
4.	148-8347	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
5.	148-8369	[1]	ELBOW AS
	3J-7354	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8628	[1]	ELBOW
6.	153-6237	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9004	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
7.	4J-0520	[1]	SEAL-O-RING
8.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
9.	8T-9101	[4]	BOLT (3/8-16X2.75-IN)
	Y		SEPARATE ILLUSTRATION

134-4721: VALVE GP-BANK

VALVE GP-BANK

134-4721 VALVE GP-BANK -AUGER HOIST, SCREED HOIST
S/N B4G1-UP; A5P1-UP
PART OF 108-2158 LINES GP-AUGER

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-9511	[1]	KIT-STACKING (BANK VALVE)
2.	151-5938	[2]	VALVE-BLOCK
3.	128-7010	[1]	VALVE GP-CHECK (BANK VALVE)
4.	114-0021	[6]	COIL
5.	086-9083	[3]	BODY
6.	086-9085	[6]	SPRING
7.	086-9086	[6]	WASHER
8.	5K-9090 J	[3]	SEAL-O-RING
9.	9X-7453 J	[6]	SEAL-QUAD RING
10.	095-1751 J	[12]	SEAL-O-RING
11.	8C-0445 J	[3]	RING-SQUARE
12.	086-9094	[3]	SPOOL
13.	7J-9108 J	[6]	SEAL-O-RING
14.	5P-2955	[2]	BOLT (5/16-18X2.5-IN)
15.	8T-8911	[4]	BOLT (5/16-18X2-IN)
16.		[3]	KIT-SOLENOID VALVE (BANK VALVE)
17.	086-9080	[6]	CASE AS
18.	157-8055	[1]	COIL
19.	157-8053	[1]	SECTION

			AVAILABLE REPAIR KIT(S):
	086-9087 J	[3]	KIT-SEAL (BANK VALVE)
	J		KIT MARKED J SERVICES PART(S) MARKED J

Information:

HYDRAULIC SYSTEM

PUMP GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications

Piston Pump (Conveyor)
AP-800D and BG-230D Asphalt Pavers Conveyor Systems

Piston Pump (Generator) - 23 kW
AP-800D and BG-230D Asphalt Pavers Machine Systems

Gear Pump (Vibratory)
AP-800D and BG-230D Asphalt Pavers Machine Systems

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Systems Operation

Piston Pump (Auxiliary)
AP-800D and BG-230D Asphalt Pavers Machine Systems

Piston Pump (Generator)
AP-800D and BG-230D Asphalt Pavers Machine Systems

Piston Pump (Conveyor)
AP-800D and BG-230D Asphalt Pavers Conveyor Systems

Gear Pump (Vibratory)
AP-800D and BG-230D Asphalt Pavers Machine Systems

Reuse And Salvage Guidelines

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}

Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Testing and Adjusting

Relief Valve (Charge) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Propel System

Piston Pump Neutral - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Propel System

Relief Valve (Charge) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Conveyor Systems

Relief Valve (Main) - Test
AP-800D and BG-230D Asphalt Pavers Conveyor Systems

Piston Pump Neutral - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Conveyor Systems

Pump Control Valve (Auxiliary) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Machine Systems

Piston Pump Flow (Generator) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Machine Systems

Pump Control Valve (Generator) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Machine Systems

Relief Valve (Vibratory) - Test and Adjust
AP-800D and BG-230D Asphalt Pavers Machine Systems

Gear Pump Flow (Vibratory) - Test
AP-800D and BG-230D Asphalt Pavers Machine Systems

Bench Test Procedures

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{3203, 5070}

Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}

Test Bench Procedure for Hydraulic Piston Pumps{3203, 5070}
Test Bench Procedure for Hydraulic Piston Pumps{3203, 5070}

Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {4268, 4306, 5070}

Service Magazine

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog AP-800D :

Truck sale:

USD $45,000

1992 CAT AP-800D

Flagler CE/Penn Jersey Machinery
Tampa, Florida

$35,500 USD

CATERPILLAR AP-800D 2006
- ASPHALT PAVERS
THOMPSON TRACTOR (Alabama/Fla)
10120 Highway 80E - Montgomery - Alaba

$79,000 USD

CATERPILLAR AP-800D 2007
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States

USD $35,500

2006 CAT AP-800D

Thompson Tractor Co. Inc.
Montgomery, Alabama

USD $59,500

2008 CAT AP-800D

Brown Equipment Co.
Ocala, Florida