AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

247-1281 EXTENSION GP-SCREED -MAXIMUM 20-FT 2-IN S/N B4G1-UP; A5P1-UP AN ATTACHMENT AP-800D ASPHALT PAVER


IMPLEMENTS
EXTENSION GP
HITCH GP
ROLLER GP-PUSH
SHAFT GP-DRIVE
SLOPE AND GRADE CONTROL
BEAM GP

ASPHALT PAVER AP-800D ASPHALT PAVER A5P
 AP-800D BG-230D Asphalt Paver A5P00001-UP (MACHINE) POWERED BY 3054C Engine KEBP0283 AP-800D A5P   (2004)

IMPLEMENTS

EXTENSION GP
EXTENSION GP-SCREED
247-1274 EXTENSION GP-SCREED
EXTENSION GP-SCREED
247-1280 EXTENSION GP-SCREED
EXTENSION GP-SCREED
247-1281 EXTENSION GP-SCREED
EXTENSION GP-SCREED
8I-0520 EXTENSION GP-SCREED
EXTENSION GP-SCREED
8I-0521 EXTENSION GP-SCREED
 

#KEBP02830400
 

247-1281: EXTENSION GP-SCREED

247-1281 EXTENSION GP-SCREED -MAXIMUM 20-FT 2-IN
S/N B4G1-UP; A5P1-UP
AN ATTACHMENT
i02118816 KEBP0283
2471281 EXTENSION GP-SCREED Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 186-3637 Y [1] EXTENSION GP-MAIN FRAME  
2. 106-9714 Y [4] EXTENSION GP-MAIN FRAME (1-FT)  
3. 5E-9809 Y [3] EXTENSION GP-AUGER (1-FT, RH)  
4. 5E-9808 Y [3] EXTENSION GP-AUGER (1-FT, LH)  
5. 245-9082 Y [2] EXTENSION GP-SCREED (ELECTRIC HEAT, W/VIB, 28-IN)  
6. 116-9509 Y [2] BEARING GP-AUGER  
7. 169-5471 Y [2] SUPPORT GP-FRAME  
8. 255-5011 [2] RELAY AS (24-VOLT)(EXTENDER)  
9. 306-7455 [2] WIRE AS  
   
  3S-2093 F [4] STRAP-CABLE  
  9U-3672 F [2] PLUG AS  
  246-3318 F [1] TUBE AS  
  8I-0922 F [1] WRENCH  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#KEBP02830401
 

8I-0520: EXTENSION GP-SCREED

8I-0520 EXTENSION GP-SCREED -DIESEL HEAT, 12-IN
S/N A5P1-UP
PART OF 106-3482 EXTENSION AR
AN ATTACHMENT
i00423849 KEBP0283
8I0520 EXTENSION GP-SCREED Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0524 [1] FRAME AS  
2. 149-2960 [1] PLATE  
3. 8I-0182 [1] BAR-NOSE  
4. 102-2732 [1] BAR-SPACER  
5. 8I-0184 [2] NUT-ADJUSTMENT (1-1/4-12-THD)  
6. 8I-0212 [2] STUD (1/2-13X5-IN)  
7. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8I-0889 B [2] SHIM (0.02-IN THK)  
9. 8I-0189 [2] STUD (1/2-13X1.75-IN)  
10. 8I-0185 [2] STUD (1/2-13X2.75-IN)  
11. 5P-2228 [3] BOLT (1/2-13X1-IN)  
12. 6V-8188 [7] NUT (1/2-13-THD)  
13. 104-2231 [2] NUT-SPRING  
14. 102-2734 [1] PLATE  
15. 8T-5361 [3] WASHER-HARD (28X49X5-MM THK)  
16. 7X-0410 [1] BOLT (1-8X4-IN)  
17. 102-2719 [2] LOCKNUT (2-1/4-16-THD)  
18. 8I-0544 [2] BUSHING  
19. 8I-0528 [2] BOLT AS  
20. 6K-3632 [4] LOCKNUT (1-8-THD)  
  B   USE AS REQUIRED
 

#KEBP02830402
 

8I-0521: EXTENSION GP-SCREED

8I-0521 EXTENSION GP-SCREED -DIESEL HEAT WITH VIBRATION, 28-IN
S/N A5P1-UP
PART OF 106-3483 EXTENSION AR
AN ATTACHMENT
i00423853 KEBP0283
8I0521 EXTENSION GP-SCREED Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0525 [1] FRAME AS  
2. 149-2963 [1] PLATE  
3. 8I-0181 [1] BAR-NOSE  
4. 102-2731 [1] BAR-SPACER  
5. 8I-0184 [3] NUT-ADJUSTMENT (1-1/4-12-THD)  
6. 8I-0212 [3] STUD (1/2-13X5-IN)  
7. 8T-4223 [21] WASHER-HARD (13.5X25.5X3-MM THK)  
8. 8I-0889 B [3] SHIM (0.02-IN THK)  
9. 8I-0189 [3] STUD (1/2-13X1.75-IN)  
10. 8I-0185 [3] STUD (1/2-13X2.75-IN)  
11. 5P-2228 [3] BOLT (1/2-13X1-IN)  
12. 6V-8188 [18] NUT (1/2-13-THD)  
13. 104-2231 [2] NUT-SPRING  
14. 102-2737 [1] PLATE  
15. 8I-0720 [2] CONNECTOR  
16. 3B-8485 [2] ELBOW  
17. 8T-5361 B [3] WASHER-HARD (28X49X5-MM THK)  
18. 7X-0410 [1] BOLT (1-8X4-IN)  
19. 102-2719 [2] LOCKNUT (2-1/4-16-THD)  
20. 8I-0544 [2] BUSHING  
21. 8I-0528 [2] BOLT AS  
22. 6K-3632 B [4] LOCKNUT (1-8-THD)  
23. 112-1276 Y [1] SHAFT GP-DRIVE (ECCENTRIC WEIGHT)(ECCENTRIC WEIGHT)  
24. 102-2735 [2] KEY-SQUARE  
25. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
26. 102-2712 [1] SHAFT AS-VIBRATORY  
27. 102-2695 [2] BEARING  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#KEBP02830403
 

166-7676: HITCH GP-TRUCK

166-7676 HITCH GP-TRUCK
S/N B4G1-UP; A5P1-UP
PART OF 171-3451 HITCH GP-TRUCK
AN ATTACHMENT
i01075463 KEBP0283
1667676 HITCH GP-TRUCK Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
2. 3H-3680 [4] NUT-JAM (1/2-13-THD)  
3. 4D-0298 [2] BEARING  
4. 4K-1493 [2] SCREW-HOLLOW (1/2-13X1-IN)  
5. 6I-9487 [4] BALL BEARING  
6. 8I-0371 [2] ROLLER-RIM  
7. 8I-0372 [2] WASHER-RETAINING  
8. 8I-0373 [2] PLATE-ARM  
9. 8I-0563 [2] SUPPORT AS-ROLLER  
10. 8I-0565 [2] TUBE AS-EXTENSION  
11. 8I-0570 [2] COVER AS-ROLLER  
12. 8I-0625 [4] WASHER (38.9X81X4.8-MM THK)  
13. 8I-0626 B [4] WASHER (1.53X2.38X.25-IN THK)  
14. 092-2555 [8] WASHER (39X72X1.5-MM THK)  
15. 118-1288 [2] GUIDE (31.9X43.5X9.65-MM THK)  
16. 118-1289 [2] SPACER (19.23X31.67X18.5-MM THK)  
17. 132-8869 [2] PIN  
18. 132-8870 [4] BEARING  
19. 133-8683 J [1] CYLINDER GP-HYDRAULIC (TRUCK HITCH)  
20. 166-4654 [2] ROLLER-SIDE  
21. 166-4660 [4] SPACER  
22. 166-7675 [1] HOUSING AS  
23. 166-7817 [2] ROLLER  
24. 166-7819 [2] SHAFT AS  
25. 171-3758 [2] ARM  
26. 1K-6872 [8] LOCKNUT (1/2-13-THD)  
27. 052-0512 [2] RING-RETAINING  
28. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
29. 6V-8182 [2] NUT (3/4-10-THD)  
30. 7X-0328 [4] BOLT (1/2-13X3.5-IN)  
31. 7X-0349 [2] BOLT (5/8-11X3-IN)  
32. 7X-0448 [2] NUT (5/8-11-THD)  
33. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
34. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 8T-4994 [6] WASHER-HARD (20X36.5X3.5-MM THK)  
36. 8T-8917 [8] BOLT (1/2-13X1.25-IN)  
37. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
38. 8T-9398 [4] BOLT (3/4-10X1.75-IN)  
39. 6V-9829 [2] CAP  
40. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
   
    AVAILABLE REPAIR KIT(S):
  8I-0653 J [1] KIT-SEAL (TRUCK HITCH)  
    (INCLUDES O-RING SEALS, BACKUP RINGS, SEALS, U-CUP SEALS & WIPER SEALS)
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#KEBP02830404
 

171-3451: HITCH GP-TRUCK

171-3451 HITCH GP-TRUCK
S/N B4G1-UP; A5P1-UP
PART OF 106-9665 INSTALLATION AR-TRUCK HITCH
AN ATTACHMENT
i01079230 KEBP0283
1713451 HITCH GP-TRUCK Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0567 [1] PIN AS-PIVOT  
2. 8I-0724 [2] FILM-INFORMATION (DAILY LUBRICATION POINT)  
3. 166-7676 Y [1] HITCH GP-TRUCK  
4. 3K-0360 [2] SEAL-O-RING  
5. 5C-6266 [1] BOLT (5/8-11X1-IN)  
6. 9S-4185 [2] PLUG (3/4-16-THD)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02830405
 

106-9665: INSTALLATION AR-TRUCK HITCH

106-9665 INSTALLATION AR-TRUCK HITCH
S/N B4G1-UP; A5P1-UP
AN ATTACHMENT
i01079170 KEBP0283
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  171-3451 Y [1] HITCH GP-TRUCK  
  133-8685 Y [1] LINES GP-TRUCK HITCH  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02830406
 

112-0897: ROLLER AR-PUSH

112-0897 ROLLER AR-PUSH
S/N B4G1-UP; A5P1-UP
AN ATTACHMENT
i00486817 KEBP0283
1120897 ROLLER AR-PUSH Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-0896 Y [1] ROLLER GP-PUSH  
2. 8I-0567 [1] PIN AS-PIVOT  
3. 5C-6266 [1] BOLT (5/8-11X1-IN)  
4. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02830407
 

112-0896: ROLLER GP-PUSH

112-0896 ROLLER GP-PUSH
S/N B4G1-UP; A5P1-UP
PART OF 112-0897 ROLLER AR-PUSH
AN ATTACHMENT
i00486807 KEBP0283
1120896 ROLLER GP-PUSH Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-0895 [1] ROLLER AS  
2. 166-7817 [2] ROLLER  
3. 102-6664 [2] SHAFT AS  
4. 6I-9487 [4] BALL BEARING  
5. 8I-0625 B [4] WASHER (38.9X81X4.8-MM THK)  
6. 8I-0626 B [4] WASHER (1.53X2.38X.25-IN THK)  
7. 7X-0396 [2] BOLT (7/8-9X8.5-IN)  
8. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
9. 7X-0448 [2] NUT (5/8-11-THD)  
10. 092-2555 B [8] WASHER (39X72X1.5-MM THK)  
  B   USE AS REQUIRED
 

#KEBP02830408
 

112-1276: SHAFT GP-DRIVE

112-1276 SHAFT GP-DRIVE -ECCENTRIC WEIGHT
S/N B4G1-UP; A5P1-UP
PART OF 185-5408, 245-9082, 245-9084, 8I-0521 EXTENSION GP-SCREED
AN ATTACHMENT
i02093440 KEBP0283
1121276 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2F-5326 [4] SETSCREW (3/8-16X0.375-IN)  
2. 027-1287 [1] FITTING-GREASE  
3. 245-5928 [1] SEAL  
   
    AVAILABLE REPAIR KIT(S):
  245-5941 [2] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES CUPS, CROSS, RETAINING RINGS & GREASE FITTING)
 

#KEBP02830409
 

119-1765: BEAM GP-TRANSVERSE

119-1765 BEAM GP-TRANSVERSE -8-FT
S/N B4G1-UP; A5P1-UP
PART OF 239-3051 STRUCTURAL AR
i01348739 KEBP0283
1191765 BEAM GP-TRANSVERSE Parts scheme
  For full view, you need register

Parts for your AP-800D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-8767 [2] WASHER (10.5X60X3-MM THK)  
2. 2H-3788 [1] LOCKNUT (1/2-13-THD)  
3. 120-5880 [1] MOUNT AS  
4. 4D-0298 [1] BEARING  
5. 8B-7179 [1] SETSCREW-SOCKET (5/16-18X0.375-IN)  
6. 081-7215 [2] CUSHION-RUBBER  
7. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
8. 168-8665 [4] U-BOLT  
9. 169-7329 [4] PLATE  
10. 188-6021 [1] MOUNT AS  
11. 189-1538 [1] BEAM AS  
  7T-1099 [9] LINK  
  132-6645 [1] PLATE  
  189-1574 [1] PLATE  
12. 189-1737 [1] DEFLECTOR  
13. 031-4155 [10] LOCKNUT (5/16-18-THD)  
14. 7X-0440 [2] BOLT (5/16-18X1.75-IN)  
15. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
17. 8T-8917 [4] BOLT (1/2-13X1.25-IN)  
18. 8T-9391 [1] BOLT (1/2-13X3.75-IN)  
 

Information:

Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
Service Letter-Australia
Service Letter-CFEL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD

Caterpillar Parts SIS Catalog AP-800D :

EXTENSION GP-SCREED
247-1280 EXTENSION GP-SCREED
EXTENSION GP-SCREED
247-1274 EXTENSION GP-SCREED
EXTENSION GP-SCREED
245-9084 EXTENSION GP-SCREED
EXTENSION GP-SCREED
245-9083 EXTENSION GP-SCREED
EXTENSION GP-SCREED
245-9082 EXTENSION GP-SCREED
EXTENSION GP-SCREED
245-9082 EXTENSION GP-SCREED
EXTENSION GP-SCREED
245-9081 EXTENSION GP-SCREED
EXTENSION GP-SCREED
185-5419 EXTENSION GP-SCREED
EXTENSION GP-SCREED
8I-0520 EXTENSION GP-SCREED
EXTENSION GP-SCREED
8I-0521 EXTENSION GP-SCREED
HITCH GP-TRUCK
166-7676 HITCH GP-TRUCK
HITCH GP-TRUCK
171-3451 HITCH GP-TRUCK
106-9665 INSTALLATION AR-TRUCK HITCH
ROLLER AR-PUSH
112-0897 ROLLER AR-PUSH
ROLLER GP-PUSH
112-0896 ROLLER GP-PUSH
SHAFT GP-DRIVE
112-1276 SHAFT GP-DRIVE

Truck sale:

1992 CAT AP-800D
USD $45,000 
1992 CAT AP-800D

Flagler CE/Penn Jersey Machinery
Tampa, Florida
CATERPILLAR AP-800D 2006
$35,500 USD 
CATERPILLAR AP-800D 2006
- ASPHALT PAVERS
THOMPSON TRACTOR (Alabama/Fla)
10120 Highway 80E - Montgomery - Alaba
CATERPILLAR AP-800D 2007
$79,000 USD 
CATERPILLAR AP-800D 2007
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States
2006 CAT AP-800D
USD $35,500 
2006 CAT AP-800D

Thompson Tractor Co. Inc.
Montgomery, Alabama
2008 CAT AP-800D
USD $59,500 
2008 CAT AP-800D

Brown Equipment Co.
Ocala, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.