AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

233-1737 CASE & COVER GP-CHAIN DRIVE -LH S/N BWR451-UP PART OF 231-3530 DRIVE GP-ROTOR ALSO AN ATTACHMENT RM-300


IMPLEMENTS
CASE GP-CHAIN DRIVE
CHAMBER GP
COUPLING GP
DRIVE GP-ROTOR

RECLAIMER MIXER RM-300 RECLAIMER MIXER BWR
 RM-300 Rotary Mixer BWR00001-UP (MACHINE) POWERED BY C11 Engine KEBP0285 RM-300 BWR   (2005)

IMPLEMENTS

CASE GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
233-1727 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
233-1737 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
233-1737 CASE & COVER GP-CHAIN DRIVE
CHAIN GP-DRIVE
138-4424 CHAIN GP-DRIVE
DRIVE GP-CHAIN
237-8255 DRIVE GP-CHAIN
DRIVE GP-CHAIN
237-8255 DRIVE GP-CHAIN
LUBRICATION GP-ROTOR DRIVE
249-2708 LUBRICATION GP-ROTOR DRIVE
LUBRICATION GP-ROTOR DRIVE
249-2708 LUBRICATION GP-ROTOR DRIVE
SHAFT GP-ROTOR STUB
250-9929 SHAFT GP-ROTOR STUB
 

#KEBP02850550
 

233-1737: CASE & COVER GP-CHAIN DRIVE

233-1737 CASE & COVER GP-CHAIN DRIVE -LH
S/N BWR451-UP
PART OF 231-3530 DRIVE GP-ROTOR
ALSO AN ATTACHMENT
i03498525 KEBP0285
2331737 CASE & COVER GP-CHAIN DRIVE Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-9653 [3] BOLT  
2. 8M-9307 [2] PLUG (CHAIN DRIVE CASE)  
3. 9G-5127 [1] BREATHER (ATMOSPHERIC)(CHAIN DRIVE CASE)  
4. 109-4248 [1] PLATE  
5. 109-4249 [1] GASKET  
6. 150-7212 B [2] SHIM (0.16-MM THK)  
7. 150-7213 B [3] SHIM (0.4-MM THK)  
8. 150-7214 B [3] SHIM (1.6-MM THK)  
9. 231-2944 [2] PLATE  
10. 231-6374 [1] SPROCKET AS  
11. 326-9535 C [1] CASE AS  
12. 233-3682 [2] PLATE  
13. 242-6167 [1] COVER  
14. 242-7124 [1] RETAINER  
15. 250-9929 Y [1] SHAFT GP-ROTOR STUB  
16. 030-7571 [8] BOLT (3/8-16X1-IN)  
17. 5P-4326 [1] SEAL-O-RING  
18. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
19. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
21. 9B-3523 [1] BUSHING  
23. 077-3286 BH WIRE (00-GA, BLACK)  
24. 8T-4136 M [16] BOLT (M10X1.5X25-MM)  
25. 7X-7729 [16] WASHER (11X25X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  H   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02850551
 

138-4424: CHAIN GP-DRIVE

138-4424 CHAIN GP-DRIVE
S/N BWR1-522
PART OF 231-3530 DRIVE GP-ROTOR
i01175296 KEBP0285
1384424 CHAIN GP-DRIVE Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 138-6916 [1] LINK-MASTER  
2. 138-6917 [1] LINK-OFFSET  
 

#KEBP02850552
 

261-9664: CHAMBER GP-MIXING

261-9664 CHAMBER GP-MIXING
S/N BWR1-205
PART OF 225-4095 CHASSIS AR
i02273087 KEBP0285
2619664 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 191-4455 [2] ANGLE  
14. 192-1895 [2] HUB  
15. 195-0993 [1] CHAIN  
16. 215-6320 [2] SCREW  
17. 231-4209 [2] DISC  
18. 240-1728 [2] BAR  
19. 241-0111 [2] BLOCK  
20. 250-4626 [1] POINTER  
21. 250-4627 [1] CABLE  
22. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
23. 261-9670 [1] DOOR AS (FRONT)  
24. 262-0288 [1] CHAMBER AS  
25. 262-2908 [1] DOOR AS-REAR  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
30. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
37. 7X-0368 [1] BOLT (3/4-10X3-IN)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
47. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
  M   METRIC PART
 

#KEBP02850553
 

261-9664: CHAMBER GP-MIXING

261-9664 CHAMBER GP-MIXING
S/N BWR206-374
PART OF 225-4095 CHASSIS AR
i02295973 KEBP0285
2619664 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 191-4455 [2] ANGLE  
14. 192-1895 [2] HUB  
15. 195-0993 [1] CHAIN  
16. 215-6320 [2] SCREW  
17. 231-4209 [2] DISC  
18. 240-1728 [2] BAR  
19. 241-0111 [2] BLOCK  
20. 250-4626 [1] POINTER  
21. 250-4627 [1] CABLE  
22. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
23. 267-3525 C [1] DOOR AS-FRONT  
24. 267-3522 C [1] CHAMBER AS  
25. 262-2908 [1] DOOR AS-REAR  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
30. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
37. 7X-0368 [1] BOLT (3/4-10X3-IN)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
47. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 C [1] FILM-INFORMATION (HEIGHT SCALE)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP02850554
 

261-9664: CHAMBER GP-MIXING

261-9664 CHAMBER GP-MIXING
S/N BWR375-428
PART OF 225-4095 CHASSIS AR
i02943145 KEBP0285
2619664 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 C [2] ANGLE AS  
14. 192-1895 [2] HUB  
15. 195-0993 [1] CHAIN  
16. 215-6320 [2] SCREW  
17. 231-4209 [2] DISC  
18. 240-1728 [2] BAR  
19. 241-0111 [2] BLOCK  
20. 250-4626 [1] POINTER  
21. 250-4627 [1] CABLE  
22. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
23. 267-3525 [1] DOOR AS-FRONT  
24. 267-3522 [1] CHAMBER AS  
25. 262-2908 [1] DOOR AS-REAR  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
30. 1K-6870 [1] LOCKNUT (3/4-10-THD)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
37. 7X-0368 [1] BOLT (3/4-10X3-IN)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
47. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 [1] FILM-INFORMATION (HEIGHT SCALE)  
52. 3B-8488 C [2] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP02850555
 

261-9664: CHAMBER GP-MIXING

261-9664 CHAMBER GP-MIXING
S/N BWR429-UP
PART OF 225-4095 CHASSIS AR
i03415622 KEBP0285
2619664 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 140-1187 [4] PLATE  
9. 140-1188 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 [2] ANGLE AS  
14. 192-1895 [2] HUB  
16. 215-6320 [2] SCREW  
17. 231-4209 [2] DISC  
18. 240-1728 [2] BAR  
19. 241-0111 [2] BLOCK  
20. 250-4626 [1] POINTER  
21. 250-4627 [1] CABLE  
22. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
23. 267-3525 [1] DOOR AS-FRONT  
24. 331-0729 C [1] CHAMBER AS  
  231-4197 [2] GUARD  
  231-4198 [2] GUARD  
  236-2831 [2] GUARD  
  236-2840 [2] GUARD  
  178-8507 [1] PLATE-WELD  
25. 330-5125 C [1] DOOR AS-REAR  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 1D-4689 [9] BOLT (1/2-13X1.75-IN)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 [1] FILM-INFORMATION (HEIGHT SCALE)  
52. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
53. 270-3645 C [1] BAR  
54. 8T-4132 CM [1] NUT (M16X2-THD)  
55. 7X-2558 CM [1] BOLT (M16X2X150-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP02850556
 

261-9664: CHAMBER GP-MIXING

261-9664 CHAMBER GP-MIXING
S/N BWR429-UP
PART OF 225-4095 CHASSIS AR
ALSO AN ATTACHMENT
i03637811 KEBP0285
2619664 CHAMBER GP-MIXING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8485 [2] ELBOW  
2. 3B-8489 [8] FITTING-GREASE (1/8-27 PTF)  
3. 6V-8187 [2] NUT (1/4-28-THD)  
4. 8B-8679 [1] SPACER (0.406X0.75X0.44-IN THK)  
5. 077-7730 [1] BLADE  
6. 107-4746 [2] CLAMP  
7. 107-4749 [1] PLATE  
8. 394-5144 [4] PLATE-ANGLE  
9. 394-5142 [2] PLATE  
10. 148-1892 [4] WASHER-THRUST (101.60X140X6.35-MM THK)  
11. 177-9872 [2] HOUSING-DISC  
12. 190-3072 [2] BEARING  
13. 317-2819 [2] ANGLE AS  
    (EACH INCLUDES)
  102-2868 [1] GRIP-HANDLE  
14. 419-9443 [2] HUB  
16. 215-6320 [2] SCREW  
17. 231-4209 [2] DISC  
18. 240-1728 [2] BAR  
19. 241-0111 [2] BLOCK  
20. 250-4626 [1] POINTER  
21. 250-4627 [1] CABLE  
22. 250-6776 [2] DOOR AS-ACCESS (ROTOR INSPECTION)  
23. 267-3525 [1] DOOR AS-FRONT  
24. 331-0729 [1] CHAMBER AS  
  178-8507 [1] PLATE-WELD  
  231-4197 [2] GUARD  
  231-4198 [2] GUARD  
  236-2831 [2] GUARD  
  236-2840 [2] GUARD  
25. 330-5125 [1] DOOR AS-REAR  
26. 013-8289 [6] BOLT (1/2-13X0.75-IN)  
27. 106-9898 [2] END-YOKE ROD  
28. 143-4655 [2] WASHER (18.3X24.8X0.8-MM THK)  
29. 223-8372 [9] BOLT-CARRIAGE (1/2-13X1.75-IN)  
31. 1K-6872 [39] LOCKNUT (1/2-13-THD)  
32. 1U-4014 [2] PIN  
33. 4F-3648 [30] BOLT (1/2-13X1.75-IN)  
34. 5C-9853 M [1] SCREW (M8X1.25-THD)  
35. 6K-3632 [8] LOCKNUT (1-8-THD)  
36. 7D-1649 [9] WASHER-HARD (13.5X32X5-MM THK)  
38. 7X-0413 [8] BOLT (1-8X7-IN)  
39. 7X-2533 M [2] BOLT (M6X1X35-MM)  
40. 7X-2554 M [4] BOLT (M16X2X70-MM)  
41. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
44. 8T-4223 [60] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [4] LOCKNUT (M16X2-THD)  
48. 8T-8917 [30] BOLT (1/2-13X1.25-IN)  
49. 9S-1354 [4] NUT (5/8-18-THD)  
50. 9X-2132 [2] RETAINER  
51. 123-4082 [1] FILM-INFORMATION (HEIGHT SCALE)  
52. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
53. 270-3645 [1] BAR  
55. 7X-2558 M [1] BOLT (M16X2X150-MM)  
56. 198-0683 [2] PLUG-PIPE  
  M   METRIC PART
 

#KEBP02850557
 

246-3239: COUPLING GP-TORQUE LIMITING

246-3239 COUPLING GP-TORQUE LIMITING
S/N BWR1-UP
AN ATTACHMENT
i02549879 KEBP0285
2463239 COUPLING GP-TORQUE LIMITING Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 261-6945 [1] KIT-SPRING CUP  
    (INCLUDES BOLT AS & NUTS)
2. 261-6964 [1] PLATE-PRESSURE  
3. 261-6948 [1] KIT-COUPLING (TORQUE LIMITER)  
    (INCLUDES BEARING, PLATES, BOLTS & WASHERS)
4. 261-6946 [1] HUB-OUTPUT  
    (INCLUDES PINS, HUB, BOLTS & WASHERS)
5. 261-6947 [1] HUB-INPUT  
    (INCLUDES HUB, PINS & WASHERS)
 

#KEBP02850558
 

232-2907: COUPLING GP-TRANSMISSION

232-2907 COUPLING GP-TRANSMISSION
S/N BWR1-UP
PART OF 384-0998, 384-0999, 384-1000, 384-1001, 494-7059, 494-7060 DISTRIBUTION AR
AN ATTACHMENT
i02213952 KEBP0285
2322907 COUPLING GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 228-9639 [1] DISC-SPLINED  
3. 228-9640 [1] DISC-SLIP  
4. 229-0288 [2] BUSHING-DRILL  
5. 229-0289 [2] BUSHING-DRILL  
6. 230-2395 [1] BUSHING  
7. 230-2427 [1] PLATE-RETAINER  
8. 3K-6060 [1] LOCKNUT (3/8-16-THD)  
9. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
10. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-9378 [1] BOLT (3/8-16X4-IN)  
 

#KEBP02850559
 

253-3067: CYLINDER & MTG GP-SHIFT

253-3067 CYLINDER & MTG GP-SHIFT
S/N BWR1-UP
PART OF 225-4086 POWER TRAIN AR
ALSO AN ATTACHMENT
i02209826 KEBP0285
2533067 CYLINDER & MTG GP-SHIFT Parts scheme
  For full view, you need register

Parts for your RM-300 RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-9557 [2] CLAMP  
2. 1B-4430 [2] NUT-JAM (1/2-20-THD)  
3. 4D-4065 [1] ROD END  
4. 7R-7951 [1] PLATE  
5. 228-6676 Y [2] CYLINDER GP-HYDRAULIC (PTO, TRANSMISION SHIFTER)  
6. 253-3068 [1] ROD-LINKAGE  
7. 253-3069 [1] BRACKET AS  
8. 129-3178 M [2] LOCKNUT (M6X1-THD)  
9. 148-8369 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8628 [1] ELBOW  
10. 3B-4617 [1] PIN-COTTER  
11. 6F-7010 [1] ROD END  
12. 7X-0325 [2] BOLT (1/2-13X2.5-IN)  
13. 8B-1419 [1] PIN-CLEVIS  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-6974 M [2] BOLT (M6X1X80-MM)  
16. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Rotor Service Locks
RM-300 Soil Stabilizer
Rotor Chain Drive Case Oil - Change
RM-300 Soil Stabilizer
Special Instruction
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608}
Procedure for Removal of Chain Case and Bearing Housing on Reclaimer Mixers{5608}
Disassembly and Assembly
Chain Drive (Rotor) - Remove and Install
RM-300 Reclaimer Mixer Machine Systems
Rotor Chain Case - Remove and Install
RM-300 Reclaimer Mixer Machine Systems
Service Magazine
A New Procedure for Removal of Chain Case and Bearing Housing is Available for Reclaimer Mixers {5608}
2008/02/04

Caterpillar Parts SIS Catalog RM-300 :

CASE & COVER GP-CHAIN DRIVE
233-1737 CASE & COVER GP-CHAIN DRIVE
CASE & COVER GP-CHAIN DRIVE
233-1727 CASE & COVER GP-CHAIN DRIVE
BIT AS-CUTTER
292-5103 BIT AS-CUTTER
BAR GP-BREAKER
112-2388 BAR GP-BREAKER
VALVE GP-SOLENOID
343-2904 VALVE GP-SOLENOID
VALVE GP-SOLENOID
305-2272 VALVE GP-SOLENOID
VALVE GP-SOLENOID
266-3050 VALVE GP-SOLENOID
VALVE GP-SOLENOID
255-8035 VALVE GP-SOLENOID
CHAIN GP-DRIVE
138-4424 CHAIN GP-DRIVE
CHAMBER GP-MIXING
261-9664 CHAMBER GP-MIXING
CHAMBER GP-MIXING
261-9664 CHAMBER GP-MIXING
CHAMBER GP-MIXING
261-9664 CHAMBER GP-MIXING
CHAMBER GP-MIXING
261-9664 CHAMBER GP-MIXING
CHAMBER GP-MIXING
261-9664 CHAMBER GP-MIXING
COUPLING GP-TORQUE LIMITING
246-3239 COUPLING GP-TORQUE LIMITING
COUPLING GP-TRANSMISSION
232-2907 COUPLING GP-TRANSMISSION

Truck sale:

Caterpillar RM-300
 
Caterpillar RM-300
- stabilizers / reclaimers
FOLEY EQUIPMENT COMPANY
 
 
Caterpillar RM300, stabilizers / reclaimers, Construction


Caterpillar RM300, stabilizers / reclaimers, Construction
378,000 
Caterpillar RM300, stabilizers / reclaimers, Construction

HOLT CAT
 
446.250 
Caterpillar RM300, stabilisierer/recycler, Bau-Und Bergbauausrüstung


Caterpillar RM300, stabilisators / freesmachines, Bouw
295.000 
Caterpillar RM300, stabilisators / freesmachines, Bouw


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.