AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

476-8766 PUMP GP-UNIT INJECTOR HYD S/N KHX53515-UP PART OF 387-8538 PUMP & MTG GP-UNIT INJ HYD BG-2455D


FUEL SYSTEM
PUMP GP-FUEL INJECTION
LINES GP-FUEL
SEPARATOR GP-WATER
CONTROLS
ADJUSTER GP
CROWN GP

ASPHALT PAVER BG-2455D ASPHALT PAVER BXW
 AP-1055D, BG-2455D Mobil Track Asphalt Paver BXW00001-UP (MACHINE) POWERED BY C7 Engine KEBP0287 BG-2455D BXW   (2005)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
PUMP GP-UNIT INJECTOR HYD
312-0677 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
319-0677 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
476-8766 PUMP GP-UNIT INJECTOR HYD
 

#KEBP02870160
 

476-8766: PUMP GP-UNIT INJECTOR HYD

476-8766 PUMP GP-UNIT INJECTOR HYD
S/N KHX53515-UP
PART OF 387-8538 PUMP & MTG GP-UNIT INJ HYD
i06180647 KEBP0287
4768766 PUMP GP-UNIT INJECTOR HYD Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-8062 [1] BEARING AS-NEEDLE  
2. 5C-2890 M [1] NUT (M6X1-THD)  
3. 6V-5048 [3] SEAL-O-RING  
4. 8C-6711 [1] NUT-RETAINER (1/2-20-THD)  
5. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
6. 153-7036 [1] SPOOL  
7. 179-8128 [1] SEAL-O-RING  
8. 193-1736 [1] SEAL-O-RING  
9. 218-8655 M [8] BOLT-SOCKET HEAD (M5X0.8X42-MM)  
10. 383-1992 Y [1] PUMP GP-FUEL TRANSFER  
11. 228-5897 M [4] BOLT-TORX (M8X1.25X136.7-MM)  
12. 239-2402 [4] SEAL-O-RING  
13. 260-5716 [1] SPOOL  
14. 262-0284 [1] RING-RETAINING  
15. 313-4620 M [3] SCREW-PAN HEAD (M5X0.8X25-MM)  
16. 318-8144 [1] CONNECTOR AS  
  5P-8106 E WIRE-ELECTRICAL (26-CM)  
  179-7400 [2] SEAL  
   
    AVAILABLE REPAIR KIT(S):
  396-3296 Y [1] KIT-FUEL TRANSFER PUMP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP02870161
 

205-1306: REGULATOR GP-FUEL PRESSURE

205-1306 REGULATOR GP-FUEL PRESSURE
S/N KHX1-UP
PART OF 226-7515 FILTER & LINES GP-FUEL
i01582553 KEBP0287
2051306 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 295-1803 [1] ELBOW AS  
1A. 214-7568 [1] SEAL-O-RING  
  196-6838 ELBOW  
2. 232-0343 Y [1] REGULATOR GP-FUEL PRESSURE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02870162
 

232-0343: REGULATOR GP-FUEL PRESSURE

232-0343 REGULATOR GP-FUEL PRESSURE
S/N KHX1-UP
PART OF 205-1306 REGULATOR GP-FUEL PRESSURE
i01929354 KEBP0287
2320343 REGULATOR GP-FUEL PRESSURE Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-7568 [1] SEAL-O-RING  
2. 369-6662 [1] REGULATOR AS (FUEL PRESSURE)  
 

#KEBP02870163
 

149-2683: SEPARATOR GP-WATER

149-2683 SEPARATOR GP-WATER
S/N FAC1-UP; BXW1-UP
WITH BOWL & HAND PUMP
PART OF 231-8009 LINES GP-FUEL
i00751333 KEBP0287
1492683 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2409 [1] ELEMENT-WATER SEPARATOR (PRIMARY)  
2. 149-2684 [1] BASE AS  
3. 118-8118 [1] RING-RETAINING  
4. 118-8119 [1] NUT  
5. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
    (INCLUDES SEALS)
6. 149-2685 [1] PUMP GP-FUEL PRIMING (PRIMARY FILTER)  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES CAP NUT, CAP SEAL, HEADER CAP, VENT PLUG, O-RING SEAL, RETAINING RING, DUST SEAL & VOLUME PLUG)
 

#KEBP02870164
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
S/N FAC1-UP; BXW1-UP
PART OF 8I-0257 ADJUSTER GP-HEIGHT
AN ATTACHMENT
i00465645 KEBP0287
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

#KEBP02870165
 

197-5296: ADJUSTER GP-HEIGHT

197-5296 ADJUSTER GP-HEIGHT
S/N FAC1-UP; BXW1-UP
PART OF 231-4642 SCREED AR
AN ATTACHMENT
i01446860 KEBP0287
1975296 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0075 [4] BOLT (3/4-16X1.75-IN)  
2. 1A-4168 [8] NUT (1-1/4-12-THD)  
3. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 9S-2544 [8] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 8I-0256 [8] BUSHING  
7. 8I-0267 [4] CAP  
8. 8I-0901 [2] TRUNNION  
9. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
10. 354-6744 [4] TUBE AS  
11. 106-6340 [2] SPACER (10.74X17.14X7-MM THK)  
12. 162-8005 [1] FRAME AS (LH)  
13. 165-4650 [1] FRAME AS (RH)  
14. 165-4655 [2] BLOCK AS  
15. 165-4686 [2] PLATE AS  
16. 165-4731 [2] PIN AS  
17. 185-5431 [8] BOLT-SPECIAL  
18. 185-5432 [8] LOCK  
19. 196-2503 Y [2] JACK GP-HEIGHT ADJUSTER  
20. 196-2541 [2] PLATE  
21. 196-2560 [2] PLATE  
22. 196-2566 [4] POINTER  
23. 121-1257 [8] RING-RETAINING  
24. 4L-6454 [10] BOLT (3/8-16X1-IN)  
25. 5P-1075 [22] WASHER-HARD (10.2X22.5X3-MM THK)  
26. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
27. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
28. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
29. 6V-8182 [8] NUT (3/4-10-THD)  
30. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
32. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
33. 102-2739 [2] KEY-SQUARE  
34. 196-2564 [2] BRACKET AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02870166
 

8I-0257: ADJUSTER GP-HEIGHT

8I-0257 ADJUSTER GP-HEIGHT -MANUAL
S/N FAC1-UP; BXW1-UP
PART OF 229-3115 SCREED AR
AN ATTACHMENT
i00423720 KEBP0287
8I0257 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0258 [1] PLATE AS (RH)  
2. 8I-0259 [1] PLATE AS (LH)  
    (EACH PLATE AS INCLUDES)
  5E-9146 E CHANNEL (20-CM)  
  7T-1099 [1] LINK  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8T-9393 [18] BOLT (5/8-11X1.5-IN)  
5. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
6. 253-8866 [8] PIN-SPRING  
7. 5J-3941 [8] PIN-SPRING  
8. 8I-0261 [1] FRAME AS (RH)  
9. 8I-0262 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  7T-1099 [2] LINK  
10. 8T-6871 [2] BOLT (5/8-11X2.5-IN)  
11. 1D-5118 [2] NUT-JAM (5/8-11-THD)  
12. 354-6744 [4] TUBE AS  
13. 8I-0256 [8] BUSHING  
14. 8I-0267 [4] CAP  
15. 4L-6454 [8] BOLT (3/8-16X1-IN)  
16. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 107-6186 [2] GAUGE (EXTENDER INDICATOR)  
18. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
19. 8I-0272 [2] POINTER  
20. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
21. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
22. 5S-7383 [4] BOLT (3/8-16X1.75-IN)  
23. 6V-8801 [4] NUT (3/8-16-THD)  
24. 102-2733 [2] CLEVIS  
25. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
26. 102-2704 [2] BOLT-SPECIAL  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 6V-8189 [2] NUT (5/16-18-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#KEBP02870167
 

197-9844: CHAIN GP-SCREED

197-9844 CHAIN GP-SCREED
S/N FAC1-UP; BXW1-UP
PART OF 197-5288 CROWN GP, 276-4590 CROWN GP-POWER
AN ATTACHMENT
i01489835 KEBP0287
1979844 CHAIN GP-SCREED Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2687 [1] LINK-CONNECTING  
2. 195-9533 [1] LINK-OFFSET  
 

#KEBP02870168
 

197-5288: CROWN GP

197-5288 CROWN GP
S/N FAC1-UP; BXW1-UP
PART OF 231-4642 SCREED AR
AN ATTACHMENT
i01447076 KEBP0287
1975288 CROWN GP Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING-GREASE (1/8-27 PTF)  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3P-8680 [4] CUP-BEARING  
4. 3P-8681 [4] CONE-BEARING  
5. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
6. 8I-0358 [1] POINTER  
7. 8I-0586 [1] BLOCK-TAKEUP  
8. 8I-0592 [1] SCALE-CROWN CONTROL  
9. 119-0750 [1] SPROCKET (12-TEETH)  
10. 190-5083 [1] BOLT-SPECIAL  
11. 193-1310 [2] BEARING GP-SCREED  
12. 197-9840 [1] COVER AS  
13. 197-9842 [1] PLATE  
14. 197-9844 Y [1] CHAIN GP-SCREED  
15. 197-9849 Y [1] SHAFT GP-DRIVE (REAR)  
16. 197-9850 Y [1] SHAFT GP-DRIVE (FRONT)  
17. 5J-3941 [2] PIN-SPRING  
18. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
19. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
20. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
21. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
22. 6K-3632 [2] LOCKNUT (1-8-THD)  
23. 8T-9384 [4] BOLT (1/2-13X0.875-IN)  
24. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
25. 8I-0740 [1] COUPLING GP  
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
26. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
27. 102-2739 [1] KEY-SQUARE  
28. 197-5276 [1] BRACKET AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP02870169
 

120-5898: CROWN GP-MANUAL

120-5898 CROWN GP-MANUAL
S/N FAC1-UP; BXW1-UP
PART OF 229-3115 SCREED AR
AN ATTACHMENT
i00555204 KEBP0287
1205898 CROWN GP-MANUAL Parts scheme
  For full view, you need register

Parts for your BG-2455D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0587 [1] SHAFT AS  
2. 7X-0616 [2] WASHER-HARD (28X57X6-MM THK)  
3. 6K-3632 [2] LOCKNUT (1-8-THD)  
4. 3E-4300 [2] NUT-FULL  
5. 120-5912 [2] TRUNNION  
6. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
7. 1A-0075 [4] BOLT (3/4-16X1.75-IN)  
8. 8I-0903 [2] BLOCK-BEARING  
9. 3P-8680 [4] CUP-BEARING  
10. 3P-8681 [4] CONE-BEARING  
11. 9S-4185 [2] PLUG (3/4-16-THD)  
12. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
13. 102-2701 [2] BEARING  
14. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 6V-8185 [2] NUT (1/4-20-THD)  
17. 119-0750 [2] SPROCKET (12-TEETH)  
18. 8I-0592 [1] SCALE-CROWN CONTROL  
19. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 107-2531 [1] CHAIN AS  
21. 102-2687 [1] LINK-CONNECTING  
22. 5D-8412 [2] SCREW-ROUND HEAD (8-32X0.5-IN)  
23. 102-2738 [1] POINTER  
24. 4L-6454 [4] BOLT (3/8-16X1-IN)  
25. 6V-8801 [1] NUT (3/8-16-THD)  
26. 8I-0588 [1] PLATE-MOUNTING  
27. 8I-0589 [1] BRACKET  
28. 2K-4973 [1] LOCKNUT (3/8-16-THD)  
29. 8I-0586 [1] BLOCK-TAKEUP  
30. 8T-8917 [10] BOLT (1/2-13X1.25-IN)  
31. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 8T-6871 [1] BOLT (5/8-11X2.5-IN)  
33. 1D-5118 [1] NUT-JAM (5/8-11-THD)  
34. 107-2532 [1] SHAFT AS  
35. 7X-0537 [4] WASHER-HARD (40.5X67X6-MM THK)  
36. 120-5899 [2] BAR  
37. 005-8639 [4] BEARING-ALIGNING  
38. 120-5900 [2] YOKE AS  
39. 120-5903 [4] SPACER  
40. 053-2809 [4] BOLT-SOCKET HEAD  
41. 3B-8485 [2] ELBOW  
42. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump{1256}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
Debris in Oil System Causing Repeat Failures of the (HEUI) Pump for Certain C7 and C9 Engines. {1126, 1251, 1318, 1378}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Specifications
Unit Injector Hydraulic Pump
C7 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C7 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C7 Engines for Caterpillar Built Machines
Unit Injector Hydraulic Pump
C7 Engines for Caterpillar Built Machines
Electronic Unit Injector
C7 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Electronic Unit Injector - Test
C7 Engines for Caterpillar Built Machines
Troubleshooting
Injector Trim File
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0001 FMI 06 Cylinder #1 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0001 FMI 05 Cylinder #1 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0002 FMI 05 Cylinder #2 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0002 FMI 06 Cylinder #2 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0003 FMI 06 Cylinder #3 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0004 FMI 06 Cylinder #4 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0005 FMI 06 Cylinder #5 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0006 FMI 06 Cylinder #6 Injector short
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0003 FMI 05 Cylinder #3 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0004 FMI 05 Cylinder #4 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0005 FMI 05 Cylinder #5 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
CID 0006 FMI 05 Cylinder #6 Injector open circuit
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
Injector Solenoid Circuit - Test
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers
Disassembly and Assembly
Unit Injector - Remove
C7
Engines for Caterpillar Built Machines
Unit Injector - Install
C7
Engines for Caterpillar Built Machines
Injection Actuation Pressure Sensor - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Using Injector Trim Files {1290, 7620}
2005/05/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
A New Backup Ring for the Fuel Injector Group is Now Available {1251, 1254, 1290}
2006/07/24
Installation Procedure for the Fuel Transfer Kit on the Hydraulic Electronic Unit Injector (HEUI) Pump {1256}
2008/06/30
New Improved Fuel Injectors Are Now Used {1251, 1254, 1290, 1713}
2008/10/06
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
A Hotline for the Fuel Systems for Hydraulic Electronic Unit Injectors (HEUI) Is Now Available. {1251, 1290}
2009/08/17
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10
New Injectors Are Used In Certain C7 and C9 Machine Engines {1251, 1290}
2013/08/12
A New HEUI Hydraulic Pump Is Now Used on the C7 ACERT Engines of Certain Machines {1714}
2013/08/28
Improved Caterpillar Remanufactured Fuel Injectors for Certain C7 and C9 Machine Engines {1251, 1290}
2013/09/26
Cat® Reman Is Announcing an Appearance Change to the HEUI Injectors in C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
2014/05/02
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
Improved Fuel Injectors Are Now Used on Certain C7 and C9 Machine Engines {1251, 1254, 1290, 1713}
A New Injection Pump Kit Is Now Available for C7 Machine Engines {1714}
A New Injection Pump Kit Is Now Available for C7 Machine Engines {1714}

Caterpillar Parts SIS Catalog BG-2455D :

PUMP GP-UNIT INJECTOR HYD
319-0677 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
312-0677 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
304-0677 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
295-4777 PUMP GP-UNIT INJECTOR HYD
PUMP GP-UNIT INJECTOR HYD
254-4357 PUMP GP-UNIT INJECTOR HYD
PUMP GP-FUEL TRANSFER
383-1992 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
318-6357 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
268-1839 PUMP GP-FUEL INJECTION
REGULATOR GP-FUEL PRESSURE
205-1306 REGULATOR GP-FUEL PRESSURE
REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
SEPARATOR GP-WATER
149-2683 SEPARATOR GP-WATER
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
197-5296 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
8I-0257 ADJUSTER GP-HEIGHT
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CROWN GP
197-5288 CROWN GP

Truck sale:

Caterpillar BG-2455D
 
Caterpillar BG-2455D
- Asphalt Pavers
MILTON CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.