AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

107-7732 PUMP GP-FUEL INJECTION S/N 4TF84000-UP PART OF 159-5999 ENGINE AR AP-1055B ASPHALT PAVER


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
PUMP GP-FUEL TRANSFER
TANK GP-FUEL
FILTER GP-FUEL
CONTROLS
ADJUSTER GP

ASPHALT PAVER AP-1055B ASPHALT PAVER A3P
 AP-1055B,BG-2455C Asphalt Paver A3P00001-UP (MACHINE) POWERED BY 3116 Engine KEBP0300 AP-1055B A3P   (2004)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
390-9331 KIT-INJECTOR
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
 

#KEBP03000090
 

107-7732: PUMP GP-FUEL INJECTION

107-7732 PUMP GP-FUEL INJECTION
S/N 4TF84000-UP
PART OF 159-5999 ENGINE AR
i00965883 KEBP0300
1077732 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 139-5925 M [1] BOLT-SOCKET HEAD (M6X1X30-MM)  
2. 127-8216 [1] INJECTOR GP-FUEL  
3. 114-8718 [1] SEAL-O-RING  
4. 9X-8267 [1] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP03000091
 

159-7574: PUMP GP-FUEL PRM & PRIM FILTER

159-7574 PUMP GP-FUEL PRM & PRIM FILTER
S/N 4TF84000-UP
PART OF 159-5999 ENGINE AR
i00999639 KEBP0300
1597574 PUMP GP-FUEL PRM & PRIM FILTER Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-2683 Y [1] SEPARATOR GP-WATER  
2. 7E-7603 [1] BRACKET  
3. 9S-8004 [2] PLUG (9/16-18-THD)  
4. 3J-1907 [4] SEAL-O-RING  
5. 5P-4924 [2] ELBOW  
6. 5P-4961 [2] CLAMP-HOSE  
7. 5P-1442 E HOSE (40-CM)  
8. 7X-0507 [3] WASHER-HARD (12X22.5X5-MM THK)  
9. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
12. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03000092
 

149-5380: PUMP GP-FUEL TRANSFER

149-5380 PUMP GP-FUEL TRANSFER
S/N B2G1-UP; A3P1-UP
PART OF 143-0460 TANK & PUMP GP-FUEL
i01401191 KEBP0300
1495380 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-7071 CY [1] MOTOR GP-ELECTRIC (24-VOLT)(FUEL TRANSFER PUMP)  
2. 7R-0159 [1] COUPLING  
3. 192-4302 CY [1] PUMP GP-FUEL  
4. 087-0868 [1] SPACER  
5. 8T-2501 [2] BOLT (3/8-16X2-IN)  
6. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
7. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03000093
 

149-2683: SEPARATOR GP-WATER

149-2683 SEPARATOR GP-WATER
S/N 4TF84000-UP
WITH BOWL & HAND PUMP
PART OF 159-7574 PUMP GP-FUEL PRM & PRIM FILTER
i00751333 KEBP0300
1492683 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2409 [1] ELEMENT-WATER SEPARATOR (PRIMARY)  
2. 149-2684 [1] BASE AS  
3. 118-8118 [1] RING-RETAINING  
4. 118-8119 [1] NUT  
5. 112-9401 [1] BOWL AS-WATER COLLECTION  
  128-8614 [1] KIT-SEAL (WATER SEPARATOR)  
    (INCLUDES SEALS)
6. 149-2685 [1] PUMP GP-FUEL PRIMING (PRIMARY FILTER)  
   
    AVAILABLE REPAIR KIT(S):
  121-4480 [1] KIT-WATER BASE (WATER SEPARATOR)  
    (INCLUDES CAP NUT, CAP SEAL, HEADER CAP, VENT PLUG, O-RING SEAL, RETAINING RING, DUST SEAL & VOLUME PLUG)
 

#KEBP03000094
 

143-0460: TANK & PUMP GP-FUEL

143-0460 TANK & PUMP GP-FUEL
S/N B2G1-UP; A3P1-UP
PART OF 239-3115 ENGINE AR-COMPLETE
i00726422 KEBP0300
1430460 TANK & PUMP GP-FUEL Parts scheme 1430460 TANK & PUMP GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-1531 [1] TANK AS-FUEL  
2. 7X-7700 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
  9X-2205 [1] KIT-CAP FILTER (FUEL TANK)  
  9X-8600 [1] SEAL-O-RING  
3. 9P-7121 [1] STRAINER-FUEL (FUEL TANK)(TANK)  
4. 149-5380 CY [1] PUMP GP-FUEL TRANSFER  
5. 156-4282 [1] REDUCER AS  
6. 1S-0994 [1] CLIP (LOOP)  
7. 3K-0360 [1] SEAL-O-RING  
8. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
9. 6V-8555 [1] NUT-FACE SEAL (1-14-THD)  
10. 6V-9830 [1] CAP (ORFS)  
11. 119-0072 [1] FILTER GP-FUEL  
  119-0073 [1] FILTER ELEMENT-FUEL (FUEL)  
12. 148-8341 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
13. 7R-9920 [1] SENDER AS-FUEL LEVEL  
  9X-8491 [1] NUT (10-32-THD)  
  9X-8862 [1] LOCKWASHER  
14. 8C-7974 [1] GASKET  
15. 8L-6521 [5] BOLT (10-32X0.5-IN)  
16. 4B-4274 [5] WASHER (5.5X13X1.2-MM THK)  
17. 7X-0619 [1] WASHER-HARD (20X30X2.5-MM THK)  
18. 128-5531 [4] CLAMP-HALF  
19. 107-4749 [2] PLATE  
20. 6V-9828 [1] CAP  
21. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
22. 8M-2770 [2] CLIP (LOOP)  
23. 4J-5477 [1] SEAL-O-RING  
24. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
25. 7V-5628 [1] PLATE  
26. 8T-0081 [1] VALVE-BALL (FUEL TANK)  
  3K-0360 [1] SEAL-O-RING  
27. 148-8367 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-9850 [1] ELBOW  
28. 148-8374 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
29. 164-5616 [1] PLUG AS  
  2S-4078 [1] SEAL-O-RING  
  9S-6130 [1] PLUG  
30. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
31. 3J-1907 [1] SEAL-O-RING  
32. 6V-8397 [1] SEAL-O-RING  
33. 4V-0611 [2] CLAMP  
34. 4V-0612 [1] PLATE  
35. 7X-0440 [1] BOLT (5/16-18X1.75-IN)  
36. 7X-0343 [4] BOLT (5/8-11X1.25-IN)  
37. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
38. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
39. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
40. 7V-5626 [2] CLAMP  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
42. 6V-8801 [31] NUT (3/8-16-THD)  
43. 148-8366 [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8987 [1] ELBOW  
44. 6V-9168 [2] NUT (11/16-16-THD)  
45. 164-5597 [4] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8V-6868 [1] TUBE AS  
46. 4M-5282 [6] BOLT (1/4-20X1.5-IN)  
47. 148-8377 [1] ELBOW AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8980 [1] ELBOW  
48. 129-3078 [1] VALVE AS-SHUTOFF  
49. 111-4168 I [1] HOSE AS  
50. 149-5253 CI [1] HOSE AS  
51. 154-9789 I [1] HOSE AS  
52. 6R-5056 I [1] HOSE AS  
53. 136-3179 I [1] HOSE AS  
54. 225-7657 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  9X-2091 [1] ELBOW (SWIVEL)  
55. 5E-9746 [1] HOSE  
56. 5E-9698 [2] CLAMP-HOSE  
57. 5P-8998 [1] FITTING  
58. 5E-8837 [1] ADAPTER  
59. 8T-9925 [1] BUSHING-TERMINAL (9/16-18 STR-THD)  
60. 5R-6306 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
61. 5R-6302 [1] CAP-DUST  
62. 145-5005 CI [1] HOSE AS  
63. 5H-8936 [1] ADAPTER  
64. 2T-2305 [1] ELBOW  
65. 5P-4961 [1] CLAMP-HOSE  
66. 148-8384 [1] ELBOW AS  
  6V-8979 [1] ELBOW  
  4J-5477 [2] SEAL-O-RING  
67. 142-5942 I [1] HOSE AS  
68. 8M-2773 [3] CLIP (LOOP)  
69. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
70. 148-8434 [1] TEE AS  
  6V-9843 [1] TEE  
  6V-8397 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03000095
 

190-6742: TANK GP-FUEL

190-6742 TANK GP-FUEL
S/N B2G1-UP; A3P1-UP
AN ATTACHMENT
i01314107 KEBP0300
1906742 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6R-2678 [2] CLAMP  
2. 7R-7952 [1] COVER  
3. 166-5928 I [1] HOSE AS  
4. 166-5929 I [1] HOSE AS  
5. 167-1529 [1] TANK AS-FUEL  
6. 170-6541 [1] ELBOW  
7. 170-6572 [1] VALVE-BALL  
8. 184-0996 [1] PLATE  
9. 2S-4078 [4] SEAL-O-RING  
10. 3D-2824 [2] SEAL-O-RING  
11. 3K-0360 [1] SEAL-O-RING  
12. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
13. 6V-1889 [4] CLIP (LOOP)  
14. 6V-8188 [2] NUT (1/2-13-THD)  
15. 6V-8397 [1] SEAL-O-RING  
16. 6V-8400 [3] SEAL-O-RING  
17. 6V-9007 [1] ELBOW  
18. 6V-9009 [1] ELBOW  
19. 6V-9746 [2] SEAL-O-RING  
20. 7X-0265 [2] BOLT (1/4-20X2.75-IN)  
21. 7X-0343 [2] BOLT (5/8-11X1.25-IN)  
22. 8T-2883 [1] TEE  
23. 8T-3611 [2] CONNECTOR  
24. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
25. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 9S-4185 [1] PLUG (3/4-16-THD)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP03000096
 

129-1101: VALVE GP-CHECK

129-1101 VALVE GP-CHECK -FUEL
S/N 4TF84000-UP
PART OF 129-1102 BASE GP-FUEL FILTER
i00123821 KEBP0300
1291101 VALVE GP-CHECK Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 033-6033 [1] SEAL-O-RING  
2. 6V-6923 [1] RING-BACKUP  
 

#KEBP03000097
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
S/N B2G1-UP; A3P1-UP
PART OF 8I-0257 ADJUSTER GP-HEIGHT
AN ATTACHMENT
i00465645 KEBP0300
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

#KEBP03000098
 

197-5296: ADJUSTER GP-HEIGHT

197-5296 ADJUSTER GP-HEIGHT
S/N A3P1-UP
PART OF 231-4642 SCREED AR
AN ATTACHMENT
i01446860 KEBP0300
1975296 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0075 [4] BOLT (3/4-16X1.75-IN)  
2. 1A-4168 [8] NUT (1-1/4-12-THD)  
3. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
4. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
5. 9S-2544 [8] SCREW-HEX HEAD (8-32X11.13-MM)  
6. 8I-0256 [8] BUSHING  
7. 8I-0267 [4] CAP  
8. 8I-0901 [2] TRUNNION  
9. 8I-0902 [4] SPACER (0.75X1.50X1-IN THK)  
10. 354-6744 [4] TUBE AS  
11. 106-6340 [2] SPACER (10.74X17.14X7-MM THK)  
12. 162-8005 [1] FRAME AS (LH)  
13. 165-4650 [1] FRAME AS (RH)  
14. 165-4655 [2] BLOCK AS  
15. 165-4686 [2] PLATE AS  
16. 165-4731 [2] PIN AS  
17. 185-5431 [8] BOLT-SPECIAL  
18. 185-5432 [8] LOCK  
19. 196-2503 Y [2] JACK GP-HEIGHT ADJUSTER  
20. 196-2541 [2] PLATE  
21. 196-2560 [2] PLATE  
22. 196-2566 [4] POINTER  
23. 121-1257 [8] RING-RETAINING  
24. 4L-6454 [10] BOLT (3/8-16X1-IN)  
25. 5P-1075 [22] WASHER-HARD (10.2X22.5X3-MM THK)  
26. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
27. 5P-8167 [4] BOLT (3/8-16X0.625-IN)  
28. 5S-7382 [8] BOLT (3/8-16X1.375-IN)  
29. 6V-8182 [8] NUT (3/4-10-THD)  
30. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
32. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
33. 102-2739 [2] KEY-SQUARE  
34. 196-2564 [2] BRACKET AS  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03000099
 

8I-0257: ADJUSTER GP-HEIGHT

8I-0257 ADJUSTER GP-HEIGHT -MANUAL
S/N B2G1-UP; A3P1-UP
PART OF 112-3476, 229-3115 SCREED AR
AN ATTACHMENT
i00423720 KEBP0300
8I0257 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AP-1055B ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0258 [1] PLATE AS (RH)  
2. 8I-0259 [1] PLATE AS (LH)  
    (EACH PLATE AS INCLUDES)
  5E-9146 E CHANNEL (20-CM)  
  7T-1099 [1] LINK  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8T-9393 [18] BOLT (5/8-11X1.5-IN)  
5. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
6. 253-8866 [8] PIN-SPRING  
7. 5J-3941 [8] PIN-SPRING  
8. 8I-0261 [1] FRAME AS (RH)  
9. 8I-0262 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  7T-1099 [2] LINK  
10. 8T-6871 [2] BOLT (5/8-11X2.5-IN)  
11. 1D-5118 [2] NUT-JAM (5/8-11-THD)  
12. 354-6744 [4] TUBE AS  
13. 8I-0256 [8] BUSHING  
14. 8I-0267 [4] CAP  
15. 4L-6454 [8] BOLT (3/8-16X1-IN)  
16. 8T-4896 [18] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 107-6186 [2] GAUGE (EXTENDER INDICATOR)  
18. 9S-2544 [4] SCREW-HEX HEAD (8-32X11.13-MM)  
19. 8I-0272 [2] POINTER  
20. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
21. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
22. 5S-7383 [4] BOLT (3/8-16X1.75-IN)  
23. 6V-8801 [4] NUT (3/8-16-THD)  
24. 102-2733 [2] CLEVIS  
25. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
26. 102-2704 [2] BOLT-SPECIAL  
27. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
28. 6V-8189 [2] NUT (5/16-18-THD)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Specifications
Unit Injector
3114, 3116, 3126 Engines
Unit Injector Mechanism
3114, 3116, 3126 Engines
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/05/19
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 1U-6661 Pop Tester Gp to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/24
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog AP-1055B :

PUMP GP-FUEL
192-4302 PUMP GP-FUEL
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
LINES GP-FUEL RATIO CONTROL
9Y-3943 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL FILTER
149-1350 LINES GP-FUEL FILTER
LINES GP-BURNER
8I-0658 LINES GP-BURNER
LINES GP-BURNER
110-1550 LINES GP-BURNER
390-9331 KIT-INJECTOR
131-7899 GOVERNOR GP-UNIT INJECTOR
PUMP GP-FUEL PRM & PRIM FILTER
159-7574 PUMP GP-FUEL PRM & PRIM FILTER
PUMP GP-FUEL TRANSFER
149-5380 PUMP GP-FUEL TRANSFER
SEPARATOR GP-WATER
149-2683 SEPARATOR GP-WATER
TANK & PUMP GP-FUEL
143-0460 TANK & PUMP GP-FUEL
TANK GP-FUEL
190-6742 TANK GP-FUEL
VALVE GP-CHECK
129-1101 VALVE GP-CHECK
ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
197-5296 ADJUSTER GP-HEIGHT

Truck sale:

Caterpillar AP-1055B, Construction
92,000 
Caterpillar AP-1055B, Construction
- Asphalt pavers
H.O. PENN MACHINERY CO., INC.
CATERPILLAR AP-1055B 2005
 
CATERPILLAR AP-1055B 2005
- ASPHALT PAVERS
PATTEN INDUSTRIES
United States
CATERPILLAR AP-1055B 1999
 
CATERPILLAR AP-1055B 1999
- ASPHALT PAVERS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
CATERPILLAR AP-1055B 2002
 
CATERPILLAR AP-1055B 2002
- ASPHALT PAVERS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus
CATERPILLAR AP 1055 B 1999
 
CATERPILLAR AP 1055 B 1999
- ASPHALT PAVERS
H O PENN MCHY
122 Noxon Road - Poughkeepsie - New Yo
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.