246-4607 WIRING GP-MACHINE S/N PNM1-UP PART OF 250-4606 ELECTRICAL AR PM-201 COLD PLANER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 246-4607 WIRING GP-
1. 259-6265 WIRING GP-
2. 259-6265 WIRING GP-
3. 259-6265 WIRING GP-
4. 259-6265 WIRING GP-
5. 373-2011 WIRING GP-
6. 133-4060 WIRING GP-
7. 133-4060 WIRING GP-
8. 257-4183 WIRING GP-

POWER TRAIN

CLUTCH GP

9. 247-9997 CLUTCH GP
0. INFORMATION

COLD PLANER PM-201 COLD PLANER PNM
PM-201 Cold Planer PNM00001-UP (MACHINE) POWERED BY C18 Engine KEBP0303 PM-201 PNM (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

141-2462 WIRING GP-FRONT

418-4824 WIRING GP-FRONT

246-4607 WIRING GP-MACHINE

259-6265 WIRING GP-REAR

#KEBP03030330

246-4607: WIRING GP-MACHINE

WIRING GP-MACHINE

246-4607 WIRING GP-MACHINE
S/N PNM1-UP
PART OF 250-4606 ELECTRICAL AR

i02271717 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
201-6947 Y	[1]	WIRING GP-CONVEYOR
254-7213 Y	[1]	WIRING GP-ENGINE
141-2462 Y	[1]	WIRING GP-FRONT
Y		SEPARATE ILLUSTRATION

#KEBP03030331

259-6265: WIRING GP-REAR

WIRING GP-REAR

259-6265 WIRING GP-REAR
S/N PNM1-214
PART OF 264-3822 ROTOR AR

i02271738 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3338	[6]	LOCKWASHER (EXTERNAL TOOTH)
2.	0L-1407	[1]	GROMMET
3.	6V-3342	[1]	ELBOW-PIPE
4.	175-2308 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
5.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, RH)
5A.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, LH)
6.	165-2521	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	3E-7675	[1]	SWITCH GP-PRESSURE (TRACK BRAKE)
7A.	3E-7675	[1]	SWITCH GP-PRESSURE (HYDRAULIC SYSTEM)
			(EACH SWITCH GP INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	3E-7842	[1]	RESISTOR AS (START RELAY)
	5P-5677 D	[1]	WIRE (18-GA, BLACK)(0.1-M)
	6T-3610	[1]	RESISTOR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
10.	3E-9860	[17]	LOCKNUT (5/16-18-THD)
11.	3E-9865	[2]	LOCKNUT (1/4-20-THD)
12.	3J-1907	[6]	SEAL-O-RING
13.	3J-7354	[1]	SEAL-O-RING
14.	3K-0360	[1]	SEAL-O-RING
15.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
16.	3S-2093 B	[21]	STRAP-CABLE
17.	244-1090 Y	[1]	ALARM GP (BACKUP)
18.	7X-0280	[1]	BOLT (5/16-18X5.0-IN)
19.	4D-1326	[1]	LOCKWASHER
20.	4L-6454	[1]	BOLT (3/8-16X1-IN)
21.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
22.	4M-6425	[4]	BOLT (5/16-18X1-IN)
23.	309-5078	[1]	PLATE
24.	4S-4455	[1]	CLIP
25.	5C-2890 M	[2]	NUT (M6X1-THD)
26.	7X-3163	[1]	ADAPTER-SWIVEL
27.	5P-1079	[4]	SCREW-MACHINE (4-40X0.875-IN)
28.	5P-6264	[1]	GROMMET
29.	5P-8874	[1]	ADAPTER
30.	5P-8885	[1]	ADAPTER
31.	6D-3479	[2]	CLIP (LOOP)
32.	7X-0440	[4]	BOLT (5/16-18X1.75-IN)
33.	309-5077	[1]	PLATE
34.	6V-2480	[4]	SCREW (4-40X0.5-IN)
35.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, RH)
35A.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, LH)
36.	6V-7743 M	[6]	LOCKNUT (M6X1-THD)
37.	6V-8724	[1]	ELBOW
38.	7K-1181 B	[102]	STRAP-CABLE
39.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
40.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
41.	169-7288	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
42.	8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4133 M	[6]	NUT (M10X1.5-THD)
44.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
45.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
46.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4224	[30]	WASHER-HARD (8.8X16X2-MM THK)
48.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
49.	8T-8902	[1]	ADAPTER-TEE
50.	8T-9378	[2]	BOLT (3/8-16X4-IN)
51.	9N-7446	[8]	LOCKNUT (4-40-THD)
52.	9X-0941	[3]	LOCKNUT (1/2-13-THD)
53.	9X-1439 Y	[4]	LAMP GP-FLOOD (24-VOLT)
54.	9X-4381 Y	[2]	LAMP GP-FLOOD (24-VOLT)
55.	154-6464	[1]	SWITCH AS-PRESSURE (PUMP OIL)
56.	153-3962 Y	[1]	SENSOR GP-PRESSURE (BRAKE AIR)
57.	6V-9497	[8]	WASHER-HARD (3.2X6X0.5-MM THK)
58.	269-4853	[1]	HARNESS AS-HOOD (FLOODLIGHTS)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
59.	5P-0765 E		HOSE (51-CM)
60.	102-2991	[2]	SWITCH AS-TOGGLE (ROTOR MOLDBOARD RAISE / LOWER)
			(EACH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
61.	7N-8008	[2]	SWITCH AS-TOGGLE (ROTOR SERVICE DOOR)
			(EACH INCLUDES)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
62.	221-3408	[1]	SENSOR GP-PRESSURE (PROPEL PUMP)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
63.	278-4543	[1]	HARNESS AS-REAR (CONSOLE)
	9X-0141	[2]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
			(EACH PLUG AS INCLUDES)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-4813	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	100-5805	[1]	CAP-RECEPTACLE (3-PIN)
	155-2270	[54]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	189-3158	[21]	SUPPRESSOR-ARC
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-7996	[10]	PLUG-CONNECTOR (6-PIN)
	3S-2093	[2]	STRAP-CABLE
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	186-3735	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[231]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[43]	PLUG-SEAL
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	8T-8827	[1]	BOOT (RED)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
64.	1G-9090	[1]	S-HOOK
65.	3T-2357	[2]	SWITCH GP-PUSH BUTTON (HORN)
			(EACH INCLUDES)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
66.	116-5275	[2]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
67.	116-5277	[2]	BLOCK (CONTACT)
68.	116-5273	[2]	KNOB (RED)
69.	7J-9108	[2]	SEAL-O-RING
70.	116-5270	[2]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
71.	116-6565	[2]	BLOCK AS (LIGHT)
72.	173-1985	[2]	SWITCH AS-ROCKER (LEGS CONTROL, ALL)
73.	6V-8801	[1]	NUT (3/8-16-THD)
74.	198-5468	[2]	SWITCH AS-ROCKER (REAR LEGS LOWER BYPASS)
75.	142-3009	[1]	ENCLOSURE AS-REAR
76.	142-3010	[1]	ENCLOSURE AS-REAR
			(EACH ENCLOSURE AS INCLUDES)
	5D-9629	[2]	ROD
77.	6V-8397	[2]	SEAL-O-RING
78.	134-1419	[1]	BLOCK
79.	173-1986	[2]	SWITCH AS-ROCKER (LEGS CONTROL, REAR)
80.	4P-8134	[1]	CLIP (LADDER)
81.	142-5806	[2]	BLOCK
82.	8C-3121	[8]	BOLT (5/16-18X1.5-IN)
83.	101-8562	[1]	HARNESS AS-SENSOR (TRAVEL SPEED)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	5P-1520 E		HOSE (216-CM)
	7X-6198	[2]	CONNECTOR-END
	8T-8731	[2]	PLUG-CONNECTOR (3-PIN)
84.	6D-4636	[1]	CLIP (LOOP)
85.	1G-9089 J	[1]	CHAIN (1-DM)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030332

259-6265: WIRING GP-REAR

WIRING GP-REAR

259-6265 WIRING GP-REAR
S/N PNM215-222
PART OF 264-3822 ROTOR AR

i02514646 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3338	[6]	LOCKWASHER (EXTERNAL TOOTH)
2.	0L-1407	[1]	GROMMET
3.	6V-3342	[1]	ELBOW-PIPE
4.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
5.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, RH)
5A.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, LH)
6.	165-2521	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	3E-7675	[1]	SWITCH GP-PRESSURE (TRACK BRAKE)
7A.	3E-7675	[1]	SWITCH GP-PRESSURE (HYDRAULIC SYSTEM)
			(EACH SWITCH GP INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	3E-7842	[1]	RESISTOR AS (START RELAY)
	5P-5677 D	[1]	WIRE (18-GA, BLACK)(0.1-M)
	6T-3610	[1]	RESISTOR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
10.	3E-9860	[17]	LOCKNUT (5/16-18-THD)
11.	3E-9865	[2]	LOCKNUT (1/4-20-THD)
12.	3J-1907	[6]	SEAL-O-RING
13.	3J-7354	[1]	SEAL-O-RING
14.	3K-0360	[1]	SEAL-O-RING
15.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
16.	3S-2093 B	[21]	STRAP-CABLE
17.	244-1090 Y	[1]	ALARM GP (BACKUP)
18.	7X-0280	[1]	BOLT (5/16-18X5.0-IN)
19.	4D-1326	[1]	LOCKWASHER
20.	4L-6454	[1]	BOLT (3/8-16X1-IN)
21.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
22.	4M-6425	[4]	BOLT (5/16-18X1-IN)
23.	309-5078	[1]	PLATE
24.	4S-4455	[1]	CLIP
25.	5C-2890 M	[2]	NUT (M6X1-THD)
26.	7X-3163	[1]	ADAPTER-SWIVEL
27.	5P-1079	[4]	SCREW-MACHINE (4-40X0.875-IN)
28.	5P-6264	[1]	GROMMET
29.	5P-8874	[1]	ADAPTER
30.	5P-8885	[1]	ADAPTER
31.	6D-3479	[2]	CLIP (LOOP)
32.	7X-0440	[4]	BOLT (5/16-18X1.75-IN)
33.	309-5077	[1]	PLATE
34.	6V-2480	[4]	SCREW (4-40X0.5-IN)
35.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, RH)
35A.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, LH)
36.	6V-7743 M	[6]	LOCKNUT (M6X1-THD)
37.	6V-8724	[1]	ELBOW
38.	7K-1181 B	[102]	STRAP-CABLE
39.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
40.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
41.	169-7288	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
42.	8T-4121	[9]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4133 M	[6]	NUT (M10X1.5-THD)
44.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
45.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
46.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4224	[30]	WASHER-HARD (8.8X16X2-MM THK)
48.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
49.	8T-8902	[1]	ADAPTER-TEE
50.	8T-9378	[2]	BOLT (3/8-16X4-IN)
51.	9N-7446	[8]	LOCKNUT (4-40-THD)
52.	9X-0941	[3]	LOCKNUT (1/2-13-THD)
53.	9X-1439 Y	[4]	LAMP GP-FLOOD (24-VOLT)
54.	9X-4381 Y	[2]	LAMP GP-FLOOD (24-VOLT)
55.	154-6464	[1]	SWITCH AS-PRESSURE (PUMP OIL)
56.	153-3962 Y	[1]	SENSOR GP-PRESSURE (BRAKE AIR)
57.	6V-9497	[8]	WASHER-HARD (3.2X6X0.5-MM THK)
58.	269-4853	[1]	HARNESS AS-HOOD (FLOODLIGHTS)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
59.	5P-0765 E		HOSE (51-CM)
60.	102-2991	[2]	SWITCH AS-TOGGLE (ROTOR MOLDBOARD RAISE / LOWER)
			(EACH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
61.	7N-8008	[2]	SWITCH AS-TOGGLE (ROTOR SERVICE DOOR)
			(EACH INCLUDES)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
62.	221-3408	[1]	SENSOR GP-PRESSURE (PROPEL PUMP)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
63.	278-4543	[1]	HARNESS AS-REAR (CONSOLE)
	9X-0141	[2]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
			(EACH PLUG AS INCLUDES)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-4813	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	100-5805	[1]	CAP-RECEPTACLE (3-PIN)
	155-2270	[54]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	189-3158	[21]	SUPPRESSOR-ARC
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-7996	[10]	PLUG-CONNECTOR (6-PIN)
	3S-2093	[2]	STRAP-CABLE
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	186-3735	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[231]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	8T-8737	[43]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
64.	5P-2675 C	[1]	BOLT (1/4-20X1.75-IN)
65.	3T-2357	[2]	SWITCH GP-PUSH BUTTON (HORN)
			(EACH INCLUDES)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
66.	116-5275	[2]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
67.	116-5277 C	[2]	BLOCK (CONTACT)
68.	116-5273	[2]	KNOB (RED)
69.	7J-9108	[2]	SEAL-O-RING
70.	116-5270	[2]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
71.	116-6565	[2]	BLOCK AS (LIGHT)
72.	173-1985	[2]	SWITCH AS-ROCKER (LEGS CONTROL, ALL)
73.	6V-8801	[1]	NUT (3/8-16-THD)
74.	198-5468	[2]	SWITCH AS-ROCKER (REAR LEGS LOWER BYPASS)
75.	142-3009	[1]	ENCLOSURE AS-REAR
76.	142-3010	[1]	ENCLOSURE AS-REAR
			(EACH ENCLOSURE AS INCLUDES)
	5D-9629	[2]	ROD
77.	6V-8397	[2]	SEAL-O-RING
78.	134-1419	[1]	BLOCK
79.	173-1986	[2]	SWITCH AS-ROCKER (LEGS CONTROL, REAR)
80.	4P-8134	[1]	CLIP (LADDER)
81.	142-5806	[2]	BLOCK
82.	8C-3121	[8]	BOLT (5/16-18X1.5-IN)
83.	101-8562	[1]	HARNESS AS-SENSOR (TRAVEL SPEED)
	3S-2093	[2]	STRAP-CABLE
	5P-1520 E		HOSE (216-CM)
	7X-6198	[2]	CONNECTOR-END
	8T-8731	[2]	PLUG-CONNECTOR (3-PIN)
84.	6D-4636	[1]	CLIP (LOOP)
85.	1G-9089 J	[1]	CHAIN (1-DM)
86.	1G-9090	[1]	S-HOOK
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030333

259-6265: WIRING GP-REAR

WIRING GP-REAR

259-6265 WIRING GP-REAR
S/N PNM223-285
PART OF 264-3822 ROTOR AR

i02746736 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3338	[6]	LOCKWASHER (EXTERNAL TOOTH)
2.	0L-1407	[1]	GROMMET
3.	6V-3342	[1]	ELBOW-PIPE
4.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
5.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, RH)
5A.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, LH)
6.	165-2521	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	3E-7675	[1]	SWITCH GP-PRESSURE (TRACK BRAKE)
7A.	3E-7675	[1]	SWITCH GP-PRESSURE (HYDRAULIC SYSTEM)
			(EACH SWITCH GP INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	3E-7842	[1]	RESISTOR AS (START RELAY)
	5P-5677 D		WIRE (18-GA, BLACK)(0.1-M)
	6T-3610	[1]	RESISTOR
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
10.	3E-9860	[17]	LOCKNUT (5/16-18-THD)
11.	3E-9865	[2]	LOCKNUT (1/4-20-THD)
12.	3J-1907	[6]	SEAL-O-RING
13.	3J-7354	[1]	SEAL-O-RING
14.	3K-0360	[1]	SEAL-O-RING
15.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
16.	3S-2093 B	[21]	STRAP-CABLE
17.	244-1090 Y	[1]	ALARM GP (BACKUP)
18.	7X-0280	[1]	BOLT (5/16-18X5.0-IN)
19.	4D-1326	[1]	LOCKWASHER
20.	4L-6454	[1]	BOLT (3/8-16X1-IN)
21.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
22.	4M-6425	[4]	BOLT (5/16-18X1-IN)
23.	309-5077 C	[1]	PLATE
24.	4S-4455	[1]	CLIP
25.	5C-2890 M	[2]	NUT (M6X1-THD)
26.	7X-3163	[1]	ADAPTER-SWIVEL
27.	5P-1079	[4]	SCREW-MACHINE (4-40X0.875-IN)
28.	5P-6264	[1]	GROMMET
29.	5P-8874	[1]	ADAPTER
30.	5P-8885	[1]	ADAPTER
31.	6D-3479	[2]	CLIP (LOOP)
32.	7X-0440	[4]	BOLT (5/16-18X1.75-IN)
33.	309-5078 C	[1]	PLATE
34.	6V-2480	[4]	SCREW (4-40X0.5-IN)
35.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, RH)
35A.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, LH)
36.	6V-7743 M	[6]	LOCKNUT (M6X1-THD)
37.	6V-8724	[1]	ELBOW
38.	7K-1181 B	[102]	STRAP-CABLE
39.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
40.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
41.	169-7288	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
42.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4133 M	[8]	NUT (M10X1.5-THD)
44.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
45.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
46.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4224	[30]	WASHER-HARD (8.8X16X2-MM THK)
48.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
49.	8T-8902	[1]	ADAPTER-TEE
50.	8T-9378	[2]	BOLT (3/8-16X4-IN)
51.	9N-7446	[8]	LOCKNUT (4-40-THD)
52.	9X-0941	[3]	LOCKNUT (1/2-13-THD)
53.	9X-1439 Y	[4]	LAMP GP-FLOOD (24-VOLT)
54.	9X-4381 Y	[2]	LAMP GP-FLOOD (24-VOLT)
55.	154-6464	[1]	SWITCH AS-PRESSURE (PUMP OIL)
56.	153-3962 Y	[1]	SENSOR GP-PRESSURE (BRAKE AIR)
57.	6V-9497	[8]	WASHER-HARD (3.2X6X0.5-MM THK)
58.	269-4853	[1]	HARNESS AS-HOOD (FLOODLIGHTS)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
59.	5P-0765 E		HOSE (51-CM)
60.	102-2991	[2]	SWITCH AS-TOGGLE (ROTOR MOLDBOARD RAISE / LOWER)
			(EACH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
61.	7N-8008	[2]	SWITCH AS-TOGGLE (ROTOR SERVICE DOOR)
			(EACH INCLUDES)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
62.	221-3408	[1]	SENSOR GP-PRESSURE (PROPEL PUMP)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
63.	278-4543	[1]	HARNESS AS-REAR (CONSOLE)
	9X-0141	[2]	PLUG AS-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
			(EACH PLUG AS INCLUDES)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-4813	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	100-5805	[1]	CAP-RECEPTACLE (3-PIN)
	155-2270	[54]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	189-3158	[21]	SUPPRESSOR-ARC
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3E-7996	[10]	PLUG-CONNECTOR (6-PIN)
	3S-2093	[2]	STRAP-CABLE
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	186-3735	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
	186-3736	[231]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	8T-8737	[43]	PLUG-SEAL
	8T-8827	[1]	BOOT (RED)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
64.	5P-2675	[1]	BOLT (1/4-20X1.75-IN)
65.	3T-2357	[2]	SWITCH GP-PUSH BUTTON (HORN)
			(EACH INCLUDES)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
66.	116-5275	[2]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
67.	116-5277	[2]	BLOCK (CONTACT)
68.	116-5273	[2]	KNOB (RED)
69.	7J-9108	[2]	SEAL-O-RING
70.	116-5270	[2]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
71.	116-6565	[2]	BLOCK AS (LIGHT)
72.	173-1985	[2]	SWITCH AS-ROCKER (LEGS CONTROL, ALL)
73.	6V-8801	[1]	NUT (3/8-16-THD)
74.	198-5468	[2]	SWITCH AS-ROCKER (REAR LEGS LOWER BYPASS)
75.	142-3009	[1]	ENCLOSURE AS-REAR
76.	142-3010	[1]	ENCLOSURE AS-REAR
			(EACH ENCLOSURE AS INCLUDES)
	5D-9629	[2]	ROD
77.	6V-8397	[2]	SEAL-O-RING
78.	134-1419	[1]	BLOCK
79.	173-1986	[2]	SWITCH AS-ROCKER (LEGS CONTROL, REAR)
80.	4P-8134	[1]	CLIP (LADDER)
81.	142-5806	[2]	BLOCK
82.	8C-3121	[8]	BOLT (5/16-18X1.5-IN)
83.	101-8562	[1]	HARNESS AS-SENSOR (TRAVEL SPEED)
	3S-2093	[2]	STRAP-CABLE
	5P-1520 E		HOSE (216-CM)
	7X-6198	[2]	CONNECTOR-END
	8T-8731	[2]	PLUG-CONNECTOR (3-PIN)
84.	8T-3426 CD		CHANNEL-TRIM (0.125-M EACH)
85.	1G-9089 J		CHAIN (1-DM)
86.	1G-9090	[1]	S-HOOK
87.	6D-4636	[1]	CLIP (LOOP)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030334

259-6265: WIRING GP-REAR

WIRING GP-REAR

259-6265 WIRING GP-REAR
S/N PNM1-UP
PART OF 264-3822 ROTOR AR
AN ATTACHMENT

i04371744 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3338	[6]	LOCKWASHER (EXTERNAL TOOTH)
2.	0L-1407	[1]	GROMMET
3.	6V-3342	[1]	ELBOW-PIPE
4.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(STARTER RELAY)
5.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, RH)
5A.	173-1987	[2]	SWITCH AS-ROCKER (LEG CONTROL, FRONT, LH)
6.	165-2521	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	3E-7675	[1]	SWITCH GP-PRESSURE (TRACK BRAKE)
7A.	3E-7675	[1]	SWITCH GP-PRESSURE (HYDRAULIC SYSTEM)
			(EACH SWITCH GP INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	3E-7842	[1]	RESISTOR AS (START RELAY)
	5P-5677 D		WIRE (18-GA, BLACK)(0.1-M)
	6T-3610	[1]	RESISTOR
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
9.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
10.	3E-9860	[17]	LOCKNUT (5/16-18-THD)
11.	3E-9865	[2]	LOCKNUT (1/4-20-THD)
12.	3J-1907	[6]	SEAL-O-RING
13.	3J-7354	[1]	SEAL-O-RING
14.	3K-0360	[1]	SEAL-O-RING
15.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
16.	3S-2093 B	[21]	STRAP-CABLE
17.	244-1090 Y	[1]	ALARM GP (BACKUP)
18.	7X-0280	[1]	BOLT (5/16-18X5.0-IN)
19.	4D-1326	[1]	LOCKWASHER
20.	4L-6454	[1]	BOLT (3/8-16X1-IN)
21.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
22.	4M-6425	[4]	BOLT (5/16-18X1-IN)
24.	4S-4455	[1]	CLIP
25.	5C-2890 M	[2]	NUT (M6X1-THD)
26.	4I-6287	[1]	COUPLING
27.	5P-1079	[4]	SCREW-MACHINE (4-40X0.875-IN)
28.	5P-6264	[1]	GROMMET
29.	5P-8874	[1]	ADAPTER
30.	5P-8885	[1]	ADAPTER
31.	6D-3479	[2]	CLIP (LOOP)
32.	8T-8911 C	[4]	BOLT (5/16-18X2-IN)
34.	6V-2480	[4]	SCREW (4-40X0.5-IN)
35.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, RH)
35A.	3E-6466 Y	[1]	LAMP GP-SIGNAL (24-VOLT)(REAR, LH)
36.	6V-7743 M	[6]	LOCKNUT (M6X1-THD)
37.	6V-8724	[1]	ELBOW
38.	7K-1181 BC	[104]	STRAP-CABLE
39.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
40.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
41.	169-7288	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
42.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4133 M	[8]	NUT (M10X1.5-THD)
44.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
45.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
46.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-4224	[30]	WASHER-HARD (8.8X16X2-MM THK)
48.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
49.	8T-8902	[1]	ADAPTER-TEE
50.	8T-9378	[2]	BOLT (3/8-16X4-IN)
51.	9N-7446	[8]	LOCKNUT (4-40-THD)
52.	9X-0941	[3]	LOCKNUT (1/2-13-THD)
53.	9X-1439 Y	[4]	LAMP GP-FLOOD (24-VOLT)
54.	126-7487 CY	[2]	LAMP GP-FLOOD (24-VOLT)
55.	154-6464	[1]	SWITCH AS-PRESSURE (PUMP OIL)
56.	153-3962 Y	[1]	SENSOR GP-PRESSURE (BRAKE AIR)
57.	6V-9497	[8]	WASHER-HARD (3.2X6X0.5-MM THK)
58.	269-4853	[1]	HARNESS AS-HOOD (FLOODLIGHTS)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1475	[4]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
59.	5P-0765 E		HOSE (51-CM)
60.	102-2991	[2]	SWITCH AS-TOGGLE (ROTOR MOLDBOARD RAISE / LOWER)
			(EACH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
61.	7N-8008	[2]	SWITCH AS-TOGGLE (ROTOR SERVICE DOOR)
			(EACH INCLUDES)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
62.	221-3408	[1]	SENSOR GP-PRESSURE (PROPEL PUMP)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
63.	372-7242 C	[1]	HARNESS AS-REAR
	8T-8827	[1]	BOOT (RED)
	8C-3056 E		CABLE (2-GA, RED)(491-CM)
	100-5805	[1]	CAP-RECEPTACLE (3-PIN)
	8T-8729	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9X-0141	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[55]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	3E-7996	[10]	PLUG-CONNECTOR (6-PIN)
	8T-8737	[43]	PLUG-SEAL
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPATCLE AS & WEDGE)
	9X-4813	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[8]	STRAP-CABLE
	189-3158	[21]	SUPPRESSOR-ARC
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
	9X-4997	[1]	TERMINAL AS
	5P-2321	[36]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	5P-1475	[8]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8066	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8071	[7]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8076	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8081	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	065-5071	[64]	TERMINAL-BLADE (14-GA TO 16-GA)
64.	5P-2675	[1]	BOLT (1/4-20X1.75-IN)
65.	3T-2357	[2]	SWITCH GP-PUSH BUTTON (HORN)
			(EACH INCLUDES)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
66.	116-5275	[2]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
67.	116-5277	[2]	BLOCK (CONTACT)
68.	116-5273	[2]	KNOB (RED)
69.	7J-9108	[2]	SEAL-O-RING
70.	116-5270	[2]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
71.	116-6565	[2]	BLOCK AS (LIGHT)
			(EACH INCLUDES)
	8L-9801	[1]	LAMP (12-VOLT)(EMERGENCY STOP)
72.	173-1985	[2]	SWITCH AS-ROCKER (LEGS CONTROL, ALL)
73.	6V-8801	[1]	NUT (3/8-16-THD)
74.	198-5468	[2]	SWITCH AS-ROCKER (REAR LEGS LOWER BYPASS)
75.	142-3009	[1]	ENCLOSURE AS-REAR
76.	142-3010	[1]	ENCLOSURE AS-REAR
			(EACH ENCLOSURE AS INCLUDES)
	5D-9629	[2]	ROD
77.	6V-8397	[2]	SEAL-O-RING
78.	134-1419	[1]	BLOCK
79.	173-1986	[2]	SWITCH AS-ROCKER (LEGS CONTROL, REAR)
80.	4P-8134	[1]	CLIP (LADDER)
81.	142-5806	[2]	BLOCK
82.	8C-3121	[8]	BOLT (5/16-18X1.5-IN)
83.	101-8562	[1]	HARNESS AS-SENSOR (TRAVEL SPEED)
	3S-2093	[2]	STRAP-CABLE
	5P-1520 E		HOSE (216-CM)
	7X-6198	[2]	CONNECTOR-END
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8731	[2]	PLUG-CONNECTOR (3-PIN)
85.	1G-9089 J		CHAIN (1-DM)
86.	1G-9090	[1]	S-HOOK
87.	6D-4636	[1]	CLIP (LOOP)
88.	6D-4246 C	[2]	CLIP (LOOP)
89.	8T-4189 CM	[1]	BOLT (M8X1.25X20-MM)
90.	5P-4116 C	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030335

373-2011: WIRING GP-REAR

WIRING GP-REAR

373-2011 WIRING GP-REAR
S/N PNM1-UP
PART OF 378-7470 ROTOR AR
AN ATTACHMENT

i04788182 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-3338	[6]	LOCKWASHER (EXTERNAL TOOTH)
2.	0L-1407	[1]	GROMMET
3.	6V-3342	[1]	ELBOW-PIPE
4.	118-3534 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)
5.	3E-6466 Y	[2]	LAMP GP-SIGNAL (24-VOLT)(FRONT, REAR)
6.	165-2521	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
7.	3E-7675	[2]	SWITCH GP-PRESSURE
			(EACH INCLUDES)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
8.	3E-7842	[1]	RESISTOR AS (START RELAY)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	6T-3610	[1]	RESISTOR
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
9.	3E-8700 Y	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
10.	3E-9860	[17]	LOCKNUT (5/16-18-THD)
11.	3E-9865	[2]	LOCKNUT (1/4-20-THD)
12.	3J-1907	[7]	SEAL-O-RING
13.	3J-7354	[1]	SEAL-O-RING
14.	3K-0360	[1]	SEAL-O-RING
15.	3K-6060	[1]	LOCKNUT (3/8-16-THD)
16.	3S-2093	[21]	STRAP-CABLE
17.	244-1090 Y	[1]	ALARM GP (BACKUP)
18.	7X-0280	[1]	BOLT (5/16-18X5.0-IN)
19.	4D-1326	[1]	LOCKWASHER
20.	4L-6454	[1]	BOLT (3/8-16X1-IN)
21.	4M-5281	[2]	BOLT (1/4-20X0.75-IN)
22.	4M-6425	[4]	BOLT (5/16-18X1-IN)
23.	4S-4455	[1]	CLIP
24.	5C-2890 M	[2]	NUT (M6X1-THD)
25.	4I-6287	[1]	COUPLING (STORAGE)
26.	5P-1079	[4]	SCREW-MACHINE (4-40X0.875-IN)
27.	5P-6264	[1]	GROMMET
28.	5P-8874	[1]	ADAPTER
29.	5P-8885	[1]	ADAPTER
30.	6D-3479	[2]	CLIP (LOOP)
31.	8T-8911	[4]	BOLT (5/16-18X2-IN)
32.	6V-2480	[4]	SCREW (4-40X0.5-IN)
33.	173-1987	[4]	SWITCH AS-ROCKER (REAR, RAISE/LOWER)
34.	6V-7743 M	[6]	LOCKNUT (M6X1-THD)
35.	6V-8724	[1]	ELBOW (90-DEG)
36.	7K-1181	[104]	STRAP-CABLE
37.	163-1201	[1]	HORN AS (24-VOLT, LOW TONE)
38.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
39.	169-7288	[1]	ADAPTER AS
	8L-2779	[1]	SEAL-O-RING
	8L-2786	[1]	SEAL-O-RING
40.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4133 M	[8]	NUT (M10X1.5-THD)
42.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
43.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
44.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
45.	8T-4224	[30]	WASHER-HARD (8.8X16X2-MM THK)
46.	8T-4896	[5]	WASHER-HARD (10.2X18.5X2.5-MM THK)
47.	8T-8902	[1]	ADAPTER-TEE
48.	8T-9378	[2]	BOLT (3/8-16X4-IN)
49.	9N-7446	[8]	LOCKNUT (4-40-THD)
50.	9X-0941	[3]	LOCKNUT (1/2-13-THD)
51.	9X-1439 Y	[2]	LAMP GP-FLOOD (24-VOLT)(ENGINE COMPARTMENT)
51A.	9X-1439 Y	[2]	LAMP GP-FLOOD (24-VOLT)(REAR)
52.	126-7487 Y	[2]	LAMP GP-FLOOD (24-VOLT)(REAR WORK LIGHTS)
53.	154-6464	[1]	SWITCH AS-PRESSURE (TRANSMISSION OIL)
54.	153-3962 Y	[1]	SENSOR GP-PRESSURE (BRAKE AIR)
55.	6V-9497	[8]	WASHER-HARD (3.2X6X0.5-MM THK)
56.	269-4853	[1]	HARNESS AS-HOOD (FLOODLIGHTS)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-1475	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
57.	5P-0765	[51]	HOSE
58.	102-2991	[2]	SWITCH AS-TOGGLE (REAR STEER)
			(EACH INCLUDES)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
59.	7N-8008	[2]	SWITCH AS-TOGGLE (ROTOR SERVICE DOOR)
			(EACH INCLUDES)
	3L-8187	[6]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[6]	SCREW-MACHINE (6-32X0.25-IN)
60.	221-3408	[1]	SENSOR GP-PRESSURE (PROPEL PUMP)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	180-9340	[3]	SOCKET-CONNECTOR (14-GA TO 18-GA)
61.	372-7242	[1]	HARNESS AS-REAR
	8T-8827	[1]	BOOT (RED)
	8C-3056 E		CABLE (2-GA, RED)(491-CM)
	100-5805	[1]	CAP-RECEPTACLE (3-PIN)
	8T-8729	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9X-0141	[2]	PLUG AS-CONNECTOR (40-PIN)
			(EACH INCLUDES)
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	9X-7147	[1]	PLUG AS-CONNECTOR (40-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2270	[55]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	3E-7996	[10]	PLUG-CONNECTOR (6-PIN)
	8T-8737	[43]	PLUG-SEAL
	102-8803	[3]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-4813	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
	8T-8732	[1]	RECEPTACLE-CONNECTOR (3-PIN)
	8T-8730	[234]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[8]	STRAP-CABLE
	189-3158	[21]	SUPPRESSOR-ARC
	6T-5598	[1]	TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(8-CM)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
	9X-4998	[1]	SOCKET (14-GA TO 16-GA)
	8D-7529	[1]	WIRE AS
	5P-2321	[1]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
	5P-1475	[8]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8066	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8071	[7]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
	2L-8076	[4]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
	2L-8081	[2]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	065-5071	[64]	TERMINAL-BLADE (14-GA TO 16-GA)
62.	3T-2357	[2]	SWITCH GP-PUSH BUTTON (HORN)
			(EACH INCLUDES)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
63.	116-5275	[2]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
64.	116-5277	[2]	BLOCK (CONTACT)
65.	116-5273	[2]	KNOB (RED)(ENGINE STOP)
66.	7J-9108	[2]	SEAL-O-RING
67.	116-5270	[2]	LAMP (24-VOLT)
68.	116-6565	[2]	BLOCK AS (LIGHT)
			(EACH INCLUDES)
	8L-9801	[1]	LAMP (12-VOLT)
69.	173-1985	[2]	SWITCH AS-ROCKER (FRONT, REAR, RAISE/LOWER)
70.	6V-8801	[1]	NUT (3/8-16-THD)
71.	198-5468	[2]	SWITCH AS-ROCKER (REAR LOWER BYPASS)
72.	142-3009	[1]	ENCLOSURE AS-REAR (RH)
73.	142-3010	[1]	ENCLOSURE AS-REAR (LH)
			(EACH ENCLOSURE AS INCLUDES)
	5D-9629	[2]	ROD
74.	6V-8397	[2]	SEAL-O-RING
75.	134-1419	[1]	BLOCK
76.	173-1986	[2]	SWITCH AS-ROCKER (RIGHT FRONT, RAISE/LOWER)
77.	4P-8134	[1]	CLIP (LADDER)
78.	142-5806	[2]	BLOCK
79.	8C-3121	[8]	BOLT (5/16-18X1.5-IN)
80.	101-8562	[1]	HARNESS AS-SENSOR (TRAVEL SPEED)(CONTROL UNIT)
	7X-6198	[1]	CONNECTOR-END
	5P-1520 E		HOSE (216-CM)
	8T-8731	[2]	PLUG-CONNECTOR (3-PIN)
	8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
81.	1G-9089 J		CHAIN (1-DM)
82.	1G-9090	[1]	S-HOOK
83.	6D-4636	[1]	CLIP (LOOP)(SLOT)
84.	5P-2675	[1]	BOLT (1/4-20X1.75-IN)
85.	373-2021	[1]	PLATE
86.	309-5078	[1]	PLATE
87.	8T-3426 E		CHANNEL-TRIM (30-CM)
88.	6D-4246	[2]	CLIP (LOOP)(SLOT)
89.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
90.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030336

133-4060: WIRING GP-ROTOR

WIRING GP-ROTOR

133-4060 WIRING GP-ROTOR
S/N PNM1-211
PART OF 264-3822 ROTOR AR

i00502083 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	134-5064	[1]	HARNESS AS-CONTROL (ROTOR)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-8737	[10]	PLUG-SEAL
2.	110-2886	[1]	ENCLOSURE
3.	9X-1439 Y	[2]	LAMP GP-FLOOD (24-VOLT)
4.	3T-2357	[1]	SWITCH GP-PUSH BUTTON (HORN)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
5.	116-5275	[1]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
6.	180-5617	[1]	BLOCK-CONTACT
7.	116-5273	[1]	KNOB (RED)
8.	7J-9108	[1]	SEAL-O-RING
9.	086-8953	[1]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
10.	4D-1836	[1]	SWITCH-TOGGLE (LIGHT)
11.	9G-0011	[1]	SWITCH AS-TOGGLE (ROTOR ROTATE)
	3L-8187	[3]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[3]	SCREW-MACHINE (6-32X0.25-IN)
12.	6R-0486 Y	[1]	SENSOR GP-POSITION (SERVICE DOOR)
13.	116-6565	[1]	BLOCK AS (LIGHT)
14.	5E-4158	[4]	MOUNT
15.	7K-1181	[12]	STRAP-CABLE
16.	3S-2093	[5]	STRAP-CABLE
17.	4M-6425	[1]	BOLT (5/16-18X1-IN)
18.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
19.	3E-9865	[4]	LOCKNUT (1/4-20-THD)
20.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
21.	6V-8189	[1]	NUT (5/16-18-THD)
22.	3E-9860	[1]	LOCKNUT (5/16-18-THD)
23.	1H-3338	[4]	LOCKWASHER (EXTERNAL TOOTH)
24.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
26.	9M-8406	[1]	CLIP (LOOP)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030337

133-4060: WIRING GP-ROTOR

WIRING GP-ROTOR

133-4060 WIRING GP-ROTOR
S/N PNM212-282
PART OF 264-3822, 378-7470 ROTOR AR
ALSO AN ATTACHMENT

i02492857 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	134-5064	[1]	HARNESS AS-CONTROL (ROTOR)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-8737	[10]	PLUG-SEAL
	8T-8730	[18]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	5P-2321	[13]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	5P-1476	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
	6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.3-M)
2.	110-2886	[1]	ENCLOSURE
3.	9X-1439 Y	[2]	LAMP GP-FLOOD (24-VOLT)
4.	3T-2357	[1]	SWITCH GP-PUSH BUTTON (HORN)
	2H-3922	[1]	LOCKWASHER
	3B-4501	[1]	LOCKWASHER
	5L-7200	[1]	SCREW (8-32X0.375-IN)
	6V-8363	[2]	SCREW (10-32X0.312-IN)
	6V-8370	[1]	NUT-HEX (3/4-32-THD)
	7T-9515	[1]	KNOB-HORN
	8F-1434	[2]	LOCKWASHER
	9X-0199	[1]	BOOT-SWITCH
5.	116-5275	[1]	SWITCH GP-PUSH BUTTON (OPERATOR)(REMOTE ENGINE STOP)
6.	116-5277	[1]	BLOCK (CONTACT)
7.	116-5273	[1]	KNOB (RED)
8.	7J-9108	[1]	SEAL-O-RING
9.	116-5270	[1]	LAMP (24-VOLT)(REMOTE ENGINE STOP)
10.	4D-1836	[1]	SWITCH-TOGGLE (LIGHT)
11.	9G-0011	[1]	SWITCH AS-TOGGLE (ROTOR ROTATE)
	3L-8187	[3]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[3]	SCREW-MACHINE (6-32X0.25-IN)
12.	6R-0486 Y	[1]	SENSOR GP-POSITION (SERVICE DOOR)
13.	116-6565 C	[1]	BLOCK AS (LIGHT)
	8L-9801	[1]	LAMP (12-VOLT)
14.	5E-4158	[4]	MOUNT
15.	7K-1181	[12]	STRAP-CABLE
16.	3S-2093	[5]	STRAP-CABLE
17.	4M-6425	[1]	BOLT (5/16-18X1-IN)
18.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
19.	3E-9865	[4]	LOCKNUT (1/4-20-THD)
20.	8T-0389 M	[2]	LOCKNUT (M10X1.5-THD)
21.	6V-8189	[1]	NUT (5/16-18-THD)
22.	3E-9860	[1]	LOCKNUT (5/16-18-THD)
23.	1H-3338	[4]	LOCKWASHER (EXTERNAL TOOTH)
24.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
26.	9M-8406	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03030338

257-4183: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

257-4183 WIRING GP-UNIT INJECTOR
S/N PNM1-UP
FOR USE AS SERVICE REPAIR FOR INJECTOR HARNESSES WITH THE 7E-6513 CONNECTOR
FIELD INSTALLATION

i02170491 KEBP0303

2574183 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Part No	Qty	Parts name
7E-6513 F	[1]	CONNECTOR AS
091-7473 F	[2]	SPLICE-WIRE
F		NOT SHOWN

#KEBP03030339

247-9997: CLUTCH GP

CLUTCH GP

247-9997 CLUTCH GP
S/N PNM1-273; PNM276-277; PNM280-281; PNM285-285
PART OF 250-4603 ROTOR DRIVE AR

i02272782 KEBP0303

For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-9349	[1]	SHAFT-OUTPUT
2.	1T-0479	[1]	RING-RETAINING
3.	336-9313	[3]	DISC-FRICTION
4.	1T-0895	[1]	RING-RETAINING
5.	1T-1315	[2]	PLATE-CLUTCH
6.	1T-1356	[2]	RING-SEAL
7.	1T-1426	[1]	PISTON-LOCKUP CLUTCH
8.	5P-0713	[1]	SEAL-LIP TYPE
9.	6H-3956	[1]	PIN
10.	6Y-9437	[1]	PLUG-ORIFICE
11.	7B-7515	[1]	BALL BEARING
12.	7G-0141	[1]	RING-SEAL
13.	7S-7018	[2]	RING-SEAL METAL
14.	8B-8439	[1]	BALL BEARING
15.	8P-9723	[1]	RING-SEAL
16.	8S-3371	[1]	RING-SEAL
17.	9X-6163	[1]	RING-RETAINING
18.	131-0394	[1]	PLATE
19.	248-0001	[1]	HOUSING AS
20.	251-8306	[1]	HUB-CLUTCH
21.	251-8309	[1]	COVER
22.	251-8310	[1]	SUPPORT
23.	251-8311	[1]	HUB-PILOT
24.	251-8312	[1]	PLATE AS-BACKING
25.	251-8313 Y	[1]	HOUSING GP-CLUTCH
26.	251-8369	[1]	SLEEVE-WEAR
27.	251-8461	[1]	RETAINER
28.	3D-4603	[1]	PLUG-PIPE
29.	5D-1071	[1]	SEAL-O-RING
30.	5P-8286	[1]	SEAL-O-RING
31.	6V-1820 M	[6]	BOLT (M10X1.5X30-MM)
32.	6V-4248 M	[29]	BOLT (M10X1.5X25-MM)
33.	6V-5553	[1]	SEAL-O-RING
34.	6V-5839	[43]	WASHER (11X21X2.5-MM THK)
35.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
36.	8T-4185 M	[6]	BOLT (M10X1.5X50-MM)
37.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
38.	8T-4956 M	[12]	BOLT (M12X1.75X35-MM)
39.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Battery Disconnect Switch
PM-201 Cold Planer

Service Light Power Receptacle
PM-201 Cold Planer

Circuit Breakers - Reset
PM-201 Cold Planer

Monitoring System
PM-201 Cold Planer

Battery or Battery Cable - Inspect/Replace
PM-201 Cold Planer

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Procedure to Replace Machine Control Software on Cold Planers{7620}
Procedure to Replace Machine Control Software on Cold Planers{7620}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure to Install New Harness Assembly for the Cat Grade and Slope System on Certain Cold Planers {1408, 7219, 7220}
Procedure to Install New Harness Assembly for the Cat Grade and Slope System on Certain Cold Planers {1408, 7219, 7220}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Specifications

Electrical Ground Stud
C15 and C18 Engines for Caterpillar Built Machines

Electronic Control Wiring Group
C15 and C18 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Electrical Schematic (Rotor Drive System)
PM-201 Cold Planer Machine Systems

Electrical Schematic (Conveyor System)
PM-201 Cold Planer Machine Systems

Electrical Schematic (Auxiliary Hydraulic System)
PM-201 Cold Planer Machine Systems

Propel Control
PM-201 Cold Planer Machine Electronic Control System

General Information
PM-201 Cold Planer Machine Electronic Control System

Load Control
PM-201 Cold Planer Machine Electronic Control System

Rotor Control
PM-201 Cold Planer Machine Electronic Control System

Water Spray Control
PM-201 Cold Planer Machine Electronic Control System

Diagnostic Operation
PM-201 Cold Planer Machine Electronic Control System

Electronic Control Module (ECM)
PM-201 Cold Planer Machine Electronic Control System

Switches
PM-201 Cold Planer Machine Electronic Control System

Relays
PM-201 Cold Planer Machine Electronic Control System

Cat Data Link
PM-201 Cold Planer Machine Electronic Control System

Computerized Monitoring System
PM-201 Cold Planer Machine Electronic Control System

Steering Control
PM-201 Cold Planer Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C15 and C18 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

Wiring Harness (Open Circuit) - Test
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

Wiring Harness (Short Circuit) - Test
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Calibration
PM-201 Cold Planer Machine Electronic Control System

Propel Lever - Calibrate
PM-201 Cold Planer Machine Electronic Control System

Steering Mode Switch - Calibrate
PM-201 Cold Planer Machine Electronic Control System

Rotor Mode Switch - Calibrate
PM-201 Cold Planer Machine Electronic Control System

Electrical Connector - Inspect
PM-201 Cold Planer Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
PM-201 Cold Planer Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
PM-201 Cold Planer Machine Electronic Control System

Electronic Control Module (ECM) - Replace
PM-201 Cold Planer Machine Electronic Control System

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C18 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C18 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C18 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C18 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C18 Engines for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C18 Engines for Caterpillar Built Machines

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C18 Engines for Caterpillar Built Machines

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C18 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C18 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C18 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C18 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C18 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C18 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C18 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C18 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C18 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C18 Engines for Caterpillar Built Machines

CID 0102 FMI 03 Boost Pressure Sensor short to +batt
C18 Engines for Caterpillar Built Machines

CID 0102 FMI 04 Boost Pressure Sensor short to ground
C18 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C18 Engines for Caterpillar Built Machines

Coolant Flow Switch Circuit - Test
C18 Engines for Caterpillar Built Machines

CID 0782 FMI 05 Shutdown Lamp open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 0782 FMI 06 Shutdown Lamp short to ground
C18 Engines for Caterpillar Built Machines

Engine Shutdown Switch Circuit - Test
C18 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C18 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C18 Engines for Caterpillar Built Machines

Indicator Lamp Circuit - Test
C18 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C18 Engines for Caterpillar Built Machines

CID 1937 FMI 02 Engine Coolant Flow Switch incorrect
C18 Engines for Caterpillar Built Machines

CID 0177 FMI 03 Transmission Oil Temperature open/short to +batt
C18 Engines for Caterpillar Built Machines

CID 0177 FMI 04 Transmission Oil Temperature short to ground
C18 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C18 Engines for Caterpillar Built Machines

Electrical Power Supply
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

CAN Data Link 1
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

CAN Data Link 2
Cat^® Grade and Slope v2.2x for Pavers and Cold Planers

General Information
PM-201 Cold Planer Machine Electronic Control System

Connector Locations
PM-201 Cold Planer Machine Electronic Control System

CID 070 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 168 FMI F03
PM-201 Cold Planer Machine Electronic Control System

CID 168 FMI F04
PM-201 Cold Planer Machine Electronic Control System

CID 322 FMI F03
PM-201 Cold Planer Machine Electronic Control System

CID 322 FMI F05
PM-201 Cold Planer Machine Electronic Control System

CID 322 FMI F06
PM-201 Cold Planer Machine Electronic Control System

CID 623 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 637 FMI F03
PM-201 Cold Planer Machine Electronic Control System

CID 637 FMI F05
PM-201 Cold Planer Machine Electronic Control System

CID 637 FMI F06
PM-201 Cold Planer Machine Electronic Control System

CID 748 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 749 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 750 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 751 FMI F02
PM-201 Cold Planer Machine Electronic Control System

CID 755 FMI F03
PM-201 Cold Planer Machine Electronic Control System

CID 755 FMI F05
PM-201 Cold Planer Machine Electronic Control System

CID 755 FMI F06
PM-201 Cold Planer Machine Electronic Control System

Diagnostic Code List
PM-201 Cold Planer Machine Electronic Control System

Determining Diagnostic Codes
PM-201 Cold Planer Machine Electronic Control System

Power Supply Circuit of Electronic Control Module
PM-201 Cold Planer Machine Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Battery and Battery Cable - Separate and Connect
PM-201 Cold Planer Machine Systems

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A Procedure is Available to Install New Software for Machine Control on Cold Planers {7620}
2008/03/24

A New Harness is Now Used {1120, 1408}
2008/02/25

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Version 1.21 Cat Grade and Slope Firmware and Hardware Has Been Released For Asphalt Pavers and Cold Planers {1408, 7219, 7220, 7610, 7620}
2012/05/02

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain C15 Machine Engines {1290, 1408, 1900}

Caterpillar Parts SIS Catalog PM-201 :

418-4824 WIRING GP-FRONT

141-2462 WIRING GP-FRONT

254-7213 WIRING GP-ENGINE

365-4001 WIRING GP-ELECTRONIC CONTROL

279-0460 WIRING GP-ELECTRONIC CONTROL

227-9939 WIRING GP-ELECTRONIC CONTROL

259-6265 WIRING GP-REAR

373-2011 WIRING GP-REAR

133-4060 WIRING GP-ROTOR

257-4183 WIRING GP-UNIT INJECTOR

Truck sale:

234,000 USD

Caterpillar PM-201, Construction
- Asphalt cold milling machines
ZIEGLER CAT

221,000

Caterpillar PM-201, Construction
- Asphalt cold milling machines
HOLT CAT

308,000

Caterpillar PM-201, Construction
- Asphalt cold milling machines
EMPRESAS MATCO, S.A. DE C.V.
Mexico

212,500

Caterpillar PM-201, Construction
- Asphalt cold milling machines
LOUISIANA CAT

503,547

Caterpillar PM-201, Construction
- Asphalt cold milling machines
LOUISIANA CAT