HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
CYLINDER GP
#KEBP03030410
1G-7919: CYLINDER & MTG GP-TENSIONER
1G-7919 CYLINDER & MTG GP-TENSIONER
S/N PNM1-UP
PART OF 1G-7887 HYDRAULIC AR-TENSIONER
S/N PNM1-UP
PART OF 1G-7887 HYDRAULIC AR-TENSIONER
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS#KEBP03030411
086-9600: CYLINDER GP-HYDRAULIC
086-9600 CYLINDER GP-HYDRAULIC -HOOD TILT
S/N PNM1-UP
50.8-MM (2-IN) BORE X 222.3-MM (8.75-IN) STROKE
PART OF 1G-7910 CYLINDER & MTG GP-HOOD
S/N PNM1-UP
50.8-MM (2-IN) BORE X 222.3-MM (8.75-IN) STROKE
PART OF 1G-7910 CYLINDER & MTG GP-HOOD
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 103-6151 | [2] | VALVE (LOCK) | |
| 2. | 9S-8001 | [1] | PLUG | |
| 3. | 5D-1986 | [1] | LOCKNUT (7/8-14-THD) | |
| 4. | 116-8707 J | [2] | SEAL-PISTON | |
| 5. | 1H-9696 J | [1] | SEAL-O-RING | |
| 6. | 1S-0670 J | [1] | RING-BACKUP | |
| 7. | 183-4425 | [1] | WIRE-LOCK | |
| 8. | 167-2295 J | [1] | SEAL-U-CUP | |
| 9. | 1G-6226 J | [1] | WIPER | |
| 10. | 6F-6672 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 101-3697 J | [1] | KIT-SEAL (HOOD TILT CYLINDER) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#KEBP03030412
111-8548: CYLINDER GP-HYDRAULIC
111-8548 CYLINDER GP-HYDRAULIC -SIDE PLATE
S/N PNM1-282
53.97MM (2.12IN) BORE X 339.85MM (13.38IN) STROKE
PART OF 112-9873 CYLINDER & MTG GP-SIDE PLATE
ALSO AN ATTACHMENT
S/N PNM1-282
53.97MM (2.12IN) BORE X 339.85MM (13.38IN) STROKE
PART OF 112-9873 CYLINDER & MTG GP-SIDE PLATE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0337 | [1] | LOCKNUT (3/4-16-THD) | |
| 2. | 115-2079 J | [1] | SEAL | |
| 3. | 115-2078 J | [1] | SEAL-O-RING | |
| 4. | 115-2081 | [1] | SEAL | |
| 5. | 115-2080 J | [1] | NYLOCK | |
| 6. | 1H-9696 J | [1] | SEAL-O-RING | |
| 7. | 1G-8866 J | [1] | SEAL-ROD | |
| 8. | 1G-7097 | [1] | WIPER-ROD | |
| 9. | 6F-4855 J | [1] | SEAL-O-RING | |
| 10. | 005-8639 | [2] | BEARING-ALIGNING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 115-2250 J | KIT-SEAL (SIDE PLATE CYLINDER) | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#KEBP03030413
132-3934: CYLINDER GP-HYDRAULIC
132-3934 CYLINDER GP-HYDRAULIC -FRONT DOOR
S/N PNM1-UP
63.5-MM (2.5-IN) BORE X 254-MM (10-IN) STROKE
PART OF 132-3933 CYLINDER & MTG GP-DOOR
S/N PNM1-UP
63.5-MM (2.5-IN) BORE X 254-MM (10-IN) STROKE
PART OF 132-3933 CYLINDER & MTG GP-DOOR
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 138-0110 | [1] | LOCKNUT | |
| 2. | 289-2946 J | [2] | SEAL-U-CUP | |
| 3. | 6F-6672 J | [1] | SEAL-O-RING | |
| 4. | 8F-6711 J | [1] | SEAL-O-RING | |
| 5. | 030-3239 J | [1] | RING-BACKUP | |
| 6. | 4B-9806 | [2] | SETSCREW-SOCKET (1/4-20X0.25-IN) | |
| 7. | 115-2080 | [2] | NYLOCK | |
| 8. | 5E-8959 J | [1] | SEAL | |
| 9. | 1G-6226 J | [1] | WIPER | |
| 10. | 1G-8927 J | [1] | SEAL-BUFFER | |
| 11. | 1G-8928 J | [1] | RING-WEAR | |
| AVAILABLE REPAIR KIT(S): | ||||
| 1G-8718 J | [1] | KIT-SEAL (FRONT DOOR CYLINDER) | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#KEBP03030414
1G-9144: CYLINDER GP-HYDRAULIC
1G-9144 CYLINDER GP-HYDRAULIC -MIXING CHAMBER TILT
S/N PNM1-282
76.2MM (3IN) BORE X 228.6MM (9IN) STROKE
PART OF 264-3903, 332-2732, 378-7433 CHAMBER GP-ROTOR
ALSO AN ATTACHMENT
S/N PNM1-282
76.2MM (3IN) BORE X 228.6MM (9IN) STROKE
PART OF 264-3903, 332-2732, 378-7433 CHAMBER GP-ROTOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS#KEBP03030415
200-3207: CYLINDER GP-HYDRAULIC
200-3207 CYLINDER GP-HYDRAULIC -CONVEYOR
S/N PNM1-UP
101.6-MM (4-IN) BORE X 685.8-MM (27-IN) STROKE
PART OF 201-6864 CYLINDER & MTG GP-CONVEYOR
S/N PNM1-UP
101.6-MM (4-IN) BORE X 685.8-MM (27-IN) STROKE
PART OF 201-6864 CYLINDER & MTG GP-CONVEYOR
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8002 | [3] | PLUG (7/16-20-THD) | |
| 2. | 061-8350 | [1] | NUT-SELF LOCKING | |
| 3. | 105-8117 J | [1] | VALVE GP-COUNTERBALANCE (HYDRAULIC CYLINDER) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 114-3616 J | [1] | KIT-SEAL (COUNTERBALANCE VALVE) | ||
| (INCLUDES SEAL-O-RINGS & BACKUP RINGS) | ||||
| 236-2321 | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES SEAL-O-RINGS, WEAR RINGS, BACKUP RING, SEALS & WIPER SEAL) | ||||
| J | KIT MARKED J SERVCIES PART MARKD J | |||
#KEBP03030416
204-5736: CYLINDER GP-HYDRAULIC
204-5736 CYLINDER GP-HYDRAULIC -TENSIONER
S/N PNM1-UP
63.5-MM (2.5-IN) BORE X 144.5-MM (5.69-IN) STROKE
PART OF 1G-7919 CYLINDER & MTG GP-TENSIONER
S/N PNM1-UP
63.5-MM (2.5-IN) BORE X 144.5-MM (5.69-IN) STROKE
PART OF 1G-7919 CYLINDER & MTG GP-TENSIONER
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-1986 | [1] | LOCKNUT (7/8-14-THD) | |
| 2. | 8F-6711 J | [1] | SEAL-O-RING | |
| 3. | 030-3239 J | [1] | RING-BACKUP | |
| 4. | 005-8639 | [2] | BEARING-ALIGNING | |
| 5. | 3B-8488 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 6. | 6V-9746 J | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 225-0381 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES SEAL-O-RINGS, BACKUP RING, WEAR RING, WIPER, CAP SEAL & U-CUP) | ||||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
#KEBP03030417
209-4734: CYLINDER GP-HYDRAULIC
209-4734 CYLINDER GP-HYDRAULIC -ELEVATION, FRONT
S/N PNM1-UP
114.3MM (4.5 IN.) BORE X 679.3MM (26.7 IN.) STROKE
PART OF 204-5359 CYLINDER & MTG GP-ELEVATION
S/N PNM1-UP
114.3MM (4.5 IN.) BORE X 679.3MM (26.7 IN.) STROKE
PART OF 204-5359 CYLINDER & MTG GP-ELEVATION
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-4431 | [1] | BEARING-ALIGNING | |
| 2. | 1G-8741 J | [1] | VALVE GP-COUNTERBALANCE (ELEVATION CYLINDER) | |
| 3. | 5M-6667 | [1] | LOCKNUT (1-1/2-12-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 233-6361 | [1] | KIT-SEAL (ELEVATION CYLINDER) | ||
| (INCLUDES SEALS, SEAL-O-RINGS, WEAR RINGS, BACKUP RING & WIPER) | ||||
| 122-9776 J | [1] | KIT-SEAL (COUNTERBALANCE VALVE) | ||
| (INCLUDES SEAL-O-RINGS & BACKUP WASHERS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#KEBP03030418
209-7647: CYLINDER GP-HYDRAULIC
209-7647 CYLINDER GP-HYDRAULIC -ELEVATION, REAR
S/N PNM1-UP
101.6-MM (4-IN) BORE X 679.5-MM (26.75-IN) STROKE
PART OF 124-8307 CYLINDER & MTG GP-ELEVATION
S/N PNM1-UP
101.6-MM (4-IN) BORE X 679.5-MM (26.75-IN) STROKE
PART OF 124-8307 CYLINDER & MTG GP-ELEVATION
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SIS#KEBP03030419
239-6112: CYLINDER GP-HYDRAULIC
239-6112 CYLINDER GP-HYDRAULIC -CONVEYOR SWING
S/N PNM1-UP
76.2-MM (3-IN) BORE X 355.6-MM (14-IN) STROKE
PART OF 131-3478 CYLINDER & MTG GP-CONVEYOR
S/N PNM1-UP
76.2-MM (3-IN) BORE X 355.6-MM (14-IN) STROKE
PART OF 131-3478 CYLINDER & MTG GP-CONVEYOR
For full view, you need register
Parts for your PM-201 COLD PLANER:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Hydraulic Cylinder (Rotor Drive Idler Tensioner) - Remove and Install
PM-201 Cold Planer Machine Systems
PM-201 Cold Planer Machine Systems
Service Magazine
Caterpillar Parts SIS Catalog PM-201 :
Truck sale:
308,000
