AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

243-5614 ROTOR GP S/N PNM1-UP PART OF 384-1021 DISTRIBUTION AR Type 2 AN ATTACHMENT PM-201 COLD PLANER


IMPLEMENTS
DRIVE GP-ROTOR
SHAFT GP-DRIVE
HYDRAULIC SYSTEM
VALVE GP
IMPLEMENTS
VALVE GP-RELIEF
ELECTRICAL AND STARTING SYSTEM
VALVE GP

COLD PLANER PM-201 COLD PLANER PNM
 PM-201 Cold Planer PNM00001-UP (MACHINE) POWERED BY C18 Engine KEBP0303 PM-201 PNM   (2005)

IMPLEMENTS

DRIVE GP-ROTOR
DRIVE GP-ROTOR
132-7386 DRIVE GP-ROTOR
DRIVE GP-ROTOR
170-3782 DRIVE GP-ROTOR
ROTOR GP
130-0057 ROTOR GP
ROTOR GP
194-6854 ROTOR GP
ROTOR GP
243-5614 ROTOR GP
ROTOR GP
243-5614 ROTOR GP
ROTOR GP
385-7253 ROTOR GP
 

#KEBP03030600
 

243-5614: ROTOR GP

243-5614 ROTOR GP
S/N PNM1-UP
PART OF 384-1021 DISTRIBUTION AR
Type 2
AN ATTACHMENT
i04629035 KEBP0303
2435614 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-7570 C [190] BIT AS-CUTTER  
2. 241-4559 C [172] HOLDER  
3. 263-7077 [6] PLATE  
4. 263-7078 [6] PLATE  
5. 480-9023 [1] TOOL-REMOVAL  
6. 274-4886 [1] BIT AS-CUTTER  
7. 283-1348 [3] PLUG  
8. 095-0884 C [172] PIN-SPRING  
9. 099-7241 [36] WASHER-HARD (19X34X3-MM THK)  
10. 130-8850 M [36] NUT (M18X2.5-THD)  
11. 154-6268 [12] STUD  
12. 240-1735 M [36] BOLT (M18X2.5X90-MM)  
13. 6V-0409 [3] SEAL-BONDED  
14. 243-5615 CY [1] ROTOR AS  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03030601
 

385-7253: ROTOR GP

385-7253 ROTOR GP
S/N PNM1-UP
AN ATTACHMENT
i05333232 KEBP0303
3857253 ROTOR GP Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-7570 [199] BIT AS-CUTTER  
2. 241-4559 [181] HOLDER  
3. 263-7077 [6] PLATE  
4. 263-7078 [6] PLATE  
5. 274-4885 [1] TOOL  
6. 274-4886 [1] BIT AS-CUTTER  
7. 283-1348 [3] PLUG  
8. 095-0884 [181] PIN-SPRING  
9. 099-7241 [36] WASHER-HARD (19X34X3-MM THK)  
10. 130-8850 M [36] NUT (M18X2.5-THD)  
11. 154-6268 [12] STUD  
12. 240-1735 M [36] BOLT (M18X2.5X90-MM)  
13. 6V-0409 [3] SEAL-BONDED  
14. 385-7254 Y [1] ROTOR AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03030602
 

244-1911: SHAFT GP-DRIVE

244-1911 SHAFT GP-DRIVE
S/N PNM1-UP
PART OF 250-4603 ROTOR DRIVE AR
i02272717 KEBP0303
2441911 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8169 [1] BEARING  
2. 1S-8754 [1] UNIVERSAL JOINT GP  
  1A-6306 [8] BOLT  
  1S-8753 [1] PLATE-COUPLING  
  3H-0122 [2] FITTING-GREASE  
  5P-7213 [8] WASHER-HARD (13.5X20.5X2-MM THK)  
  9V-7710 [2] SPIDER & BEARING GP  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 5D-6141 [1] RETAINER  
4. 6I-8053 [1] YOKE AS  
  4F-8503 [1] PLUG-CUP  
5. 9V-3811 [8] BOLT-12 POINT HEAD (1/2-20X2.25-IN)  
6. 244-5436 [1] YOKE-BRAKE FLANGE  
7. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
8. 7D-1195 [1] SEAL-O-RING  
 

#KEBP03030603
 

264-5129: VALVE & MTG GP-CLUTCH

264-5129 VALVE & MTG GP-CLUTCH
S/N PNM1-UP
PART OF 250-4608 HYDRAULIC AR-CLUTCH
i02271811 KEBP0303
2645129 VALVE & MTG GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-5140 [2] SEAL-O-RING  
2. 7X-0296 [3] BOLT (3/8-16X5.5-IN)  
3. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 258-7605 Y [1] VALVE GP-CLUTCH  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03030604
 

258-7605: VALVE GP-CLUTCH

258-7605 VALVE GP-CLUTCH
S/N PNM1-UP
PART OF 264-5129 VALVE & MTG GP-CLUTCH
Type 1
i02271833 KEBP0303
2587605 VALVE GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1618 [6] BOLT (5/16-18X1-IN)  
2. 6T-3724 [1] COVER  
4. 5L-9018 [2] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
5. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 7T-5044 [1] COVER  
7. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
8. 183-3407 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
10. 6V-3683 [1] SEAL-O-RING  
11. 5J-2721 B [5] SHIM (0.13-MM THK)  
12. 6J-3993 B [6] SHIM (0.25-MM THK)  
13. 5J-1036 B [7] SHIM (0.8-MM THK)  
14. 9W-7410 [1] SPRING  
15. 9P-0656 [2] SPOOL AS  
    (EACH INCLUDES)
  1S-1636 [1] RETAINER  
  1S-1638 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
16. 315-9859 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
18. 5M-2504 [2] SLUG  
19. 7G-7431 [1] PISTON-SELECTOR  
20. 6T-2293 [1] PISTON-LOAD  
21. 321-8641 [6] PLUG AS  
    (EACH INCLUDES)
  9S-8001 [1] PLUG  
  238-5078 [1] SEAL-O-RING  
23. 8L-2777 [1] SEAL-O-RING  
24. 8P-9738 [1] ORIFICE-CASCADE  
25. 8P-5058 [1] SPRING  
26. 8E-4592 [1] STOP  
27. 9P-0683 [1] SPRING  
28. 9W-6964 [1] VALVE AS-EXHAUST (TORQUE CONVERTER)  
  3E-4354 [1] BALL  
  8N-4173 [1] DOWEL  
29. 6V-6353 [1] SEAL-O-RING  
30. 9W-7411 [1] SPRING  
31. 160-7579 [1] BODY-LOAD PISTON  
32. 6V-0852 [1] CAP-DUST (STEERING PUMP)  
33. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
34. 7T-6428 [1] BODY AS-VALVE  
  1S-6250 [2] DOWEL  
  5H-8985 [1] PIN-SPRING  
  7L-0811 [1] DOWEL  
35. 107-3116 [2] SEAL-O-RING  
36. 214-4040 Y [1] VALVE GP-SOLENOID (24-VOLT)  
37. 8M-8544 [1] SEAL-RECTANGULAR  
38. 3T-2167 [1] ADAPTER  
39. 4H-0945 [1] ELBOW  
40. 3T-2166 [1] TUBE  
41. 4H-1966 [1] CONNECTOR  
42. 0S-1617 [3] BOLT (5/16-18X0.75-IN)  
43. 130-5300 [1] CLIP  
44. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#KEBP03030605
 

258-7605: VALVE GP-CLUTCH

258-7605 VALVE GP-CLUTCH
S/N PNM1-UP
PART OF 264-5129 VALVE & MTG GP-CLUTCH
Type 2
i05401621 KEBP0303
2587605 VALVE GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1618 [6] BOLT (5/16-18X1-IN)  
2. 6T-3724 [1] COVER  
4. 5L-9018 [2] BOLT-SOCKET HEAD (1/4-20X1.75-IN)  
5. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 7T-5044 [1] COVER  
7. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
8. 183-3407 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
10. 6V-3683 [1] SEAL-O-RING  
11. 5J-2721 B [5] SHIM (0.13-MM THK)  
12. 6J-3993 B [6] SHIM (0.25-MM THK)  
13. 5J-1036 B [7] SHIM (0.8-MM THK)  
14. 9W-7410 [1] SPRING  
15. 9P-0656 [2] SPOOL AS  
    (EACH INCLUDES)
  1S-1636 [1] RETAINER  
  1S-1638 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
16. 315-9859 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8008 [1] PLUG (1-1/16-12-THD)  
  238-5082 [1] SEAL-O-RING  
18. 5M-2504 [2] SLUG  
19. 7G-7431 [1] PISTON-SELECTOR  
20. 6T-2293 [1] PISTON-LOAD  
21. 321-8641 [6] PLUG AS  
    (EACH INCLUDES)
  9S-8001 [1] PLUG  
  238-5078 [1] SEAL-O-RING  
23. 8L-2777 [1] SEAL-O-RING  
24. 370-6345 C [1] ORIFICE AS  
25. 8P-5058 [1] SPRING  
26. 8E-4592 [1] STOP  
27. 9P-0683 [1] SPRING  
28. 9W-6964 [1] VALVE AS-EXHAUST (TORQUE CONVERTER)  
29. 6V-6353 [1] SEAL-O-RING  
30. 9W-7411 [1] SPRING  
31. 160-7579 [1] BODY-LOAD PISTON  
32. 6V-0852 [1] CAP-DUST (STEERING PUMP)  
33. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
34. 7T-6428 [1] BODY AS-VALVE  
  1S-6250 [2] DOWEL  
  5H-8985 [1] PIN-SPRING  
  7L-0811 [1] DOWEL  
35. 107-3116 [2] SEAL-O-RING  
36. 214-4040 Y [1] VALVE GP-SOLENOID (24-VOLT)(TC LOCKUP CLUTCH)  
37. 8M-8544 [1] SEAL-RECTANGULAR  
38. 3T-2167 [1] ADAPTER  
39. 4H-0945 [1] ELBOW  
  4H-2494 [1] SLEEVE-FITTING  
  4H-2495 [1] NUT  
40. 3T-2166 [1] TUBE  
41. 4H-1966 [1] CONNECTOR  
  4H-2494 [1] SLEEVE-FITTING  
  4H-2495 [1] NUT  
42. 0S-1617 [3] BOLT (5/16-18X0.75-IN)  
43. 130-5300 [1] CLIP  
44. 2B-2695 [1] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03030606
 

109-5206: VALVE GP-RELIEF

109-5206 VALVE GP-RELIEF -HYDRAULIC CLUTCH
S/N PNM1-243
PART OF 103-6316 FILTER & MTG GP-CLUTCH
i00490958 KEBP0303
1095206 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7M-8485 [2] SEAL-O-RING  
2. 4J-0522 [1] SEAL-O-RING  
3. 6J-6858 [1] SPRING  
4. 3K-0360 [1] SEAL-O-RING  
5. 5J-0381 [1] SPACER  
6. 6E-5508 [1] RETAINER AS  
7. 9X-6395 [1] NUT (3/4-16-THD)  
8. 6E-1127 [1] CAP  
9. 8J-0331 [1] VALVE  
10. 6E-6138 [1] VALVE GP-RELIEF  
  8H-3532 [1] SPRING-VALVE  
 

#KEBP03030607
 

1G-9812: VALVE GP-RELIEF

1G-9812 VALVE GP-RELIEF -HYDRAULIC STEERING
S/N PNM1-UP
PART OF 1G-7900 VALVE & MTG GP-RELIEF
i00351867 KEBP0303
1G9812 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-0813 [1] VALVE-RELIEF  
2. 107-0812 [1] VALVE-RELIEF  
 

#KEBP03030608
 

337-5228: VALVE GP-RELIEF

337-5228 VALVE GP-RELIEF -HYDRAULIC CLUTCH
S/N PNM244-UP
PART OF 340-7087 FILTER & MTG GP-CLUTCH
i03470609 KEBP0303
3375228 VALVE GP-RELIEF Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-1127 [1] CAP  
2. 6E-5508 [1] RETAINER AS  
3. 6E-6138 [1] VALVE GP-RELIEF (MAIN)  
  8H-3532 [1] SPRING-VALVE  
4. 6J-6858 [1] SPRING  
5. 8J-0331 [1] VALVE  
6. 9X-6395 [1] NUT (3/4-16-THD)  
7. 3K-0360 [1] SEAL-O-RING  
8. 4J-0522 [1] SEAL-O-RING  
9. 5J-0381 [1] SPACER  
10. 7M-8485 [2] SEAL-O-RING  
 

#KEBP03030609
 

214-4040: VALVE GP-SOLENOID

214-4040 VALVE GP-SOLENOID -TC LOCKUP CLUTCH
S/N PNM1-UP
24-VOLT
PART OF 258-7605 VALVE GP-CLUTCH
i01844196 KEBP0303
2144040 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your PM-201 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7T-3987 [1] VALVE  
2. 7T-3988 [1] YOKE  
3. 214-6323 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
   
    AVAILABLE REPAIR KIT(S):
  160-6591 [1] KIT-VALVE (TC LOCKUP CLUTCH)  
    (INCLUDES WRENCH, SLEEVE, SPRING, PLUNGER, SEAL & NUT)
 

Information:

Operation and Maintenance Manual
Rotor Drive (Planetary) - Inspect
PM-201 Cold Planer
Rotor Drive Input - Lubricate
PM-201 Cold Planer
Rotor Drive (Planetary) Oil - Change
PM-201 Cold Planer
Rotor Drive (Planetary) Oil Sample - Obtain
PM-201 Cold Planer
Disassembly and Assembly
Rotor Planetary - Remove
PM-201 Cold Planer Machine Systems
Rotor Planetary - Install
PM-201 Cold Planer Machine Systems
Rotor Planetary - Disassemble
PM-201 Cold Planer Machine Systems
Rotor Planetary - Assemble
PM-201 Cold Planer Machine Systems
Service Magazine
Recommended Method for Removing Tool Holders on Certain Cold Planers {6637}
2013/02/19

Caterpillar Parts SIS Catalog PM-201 :

ROTOR GP
243-5614 ROTOR GP
ROTOR GP
194-6854 ROTOR GP
ROTOR GP
130-0057 ROTOR GP
250-4603 ROTOR DRIVE AR
ROTOR AS
385-7254 ROTOR AS
ROTOR AS
243-5615 ROTOR AS
ROTOR AS
194-6855 ROTOR AS
378-7470 ROTOR AR
ROTOR GP
385-7253 ROTOR GP
SHAFT GP-DRIVE
244-1911 SHAFT GP-DRIVE
VALVE & MTG GP-CLUTCH
264-5129 VALVE & MTG GP-CLUTCH
VALVE GP-CLUTCH
258-7605 VALVE GP-CLUTCH
VALVE GP-CLUTCH
258-7605 VALVE GP-CLUTCH
VALVE GP-RELIEF
109-5206 VALVE GP-RELIEF
VALVE GP-RELIEF
1G-9812 VALVE GP-RELIEF
VALVE GP-RELIEF
337-5228 VALVE GP-RELIEF

Truck sale:

Caterpillar PM-201, Construction
234,000 USD 
Caterpillar PM-201, Construction
- Asphalt cold milling machines
ZIEGLER CAT
Caterpillar PM-201, Construction
221,000 
Caterpillar PM-201, Construction
- Asphalt cold milling machines
HOLT CAT
Caterpillar PM-201, Construction
308,000 
Caterpillar PM-201, Construction
- Asphalt cold milling machines
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar PM-201, Construction
212,500 
Caterpillar PM-201, Construction
- Asphalt cold milling machines
LOUISIANA CAT
Caterpillar PM-201, Construction
503,547 
Caterpillar PM-201, Construction
- Asphalt cold milling machines
LOUISIANA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.