300-0531 WIRING GP-PLATFORM S/N C2B1-UP; C4B1-UP PART OF 266-0329 OPERATOR AR Type 1 AN ATTACHMENT CB-534D

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 300-0531 WIRING GP-
1. 300-0531 WIRING GP-
2. 300-0531 WIRING GP-

POWER TRAIN

CONTROL GP-TRACTION

3. 250-9803 CONTROL GP

DRIVE GP

4. 194-2961 DRIVE GP-D

DRUM GP

5. 189-2504 DRUM GP-CO
6. 227-9589 DRUM GP-CO
7. 257-7788 DRUM GP-CO
8. 207-1465 DRUM GP-SM

HYDRAULIC AR-PROPEL

9. 227-9572 HYDRAULIC
0. INFORMATION

VIBRATORY COMPACTOR CB-534D VIBRATORY COMPACTOR C2B
CB-534D Vibratory Compactor C2B00001-UP (MACHINE) POWERED BY 3054C Engine KEBP0305 CB-534D C2B (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

204-6988 BATTERY & WIRING GP

283-4450 WIRING GP-CONSOLE

205-8117 WIRING GP-ENGINE

205-8118 WIRING GP-MACHINE

249-6994 WIRING GP-MACHINE

202-0030 WIRING GP-PLATFORM

265-5806 WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM

#KEBP03050120

300-0531: WIRING GP-PLATFORM

WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM
S/N C2B1-UP; C4B1-UP
PART OF 266-0329 OPERATOR AR
Type 1
AN ATTACHMENT

i03577105 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118	[1]	CLIP
8.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
8A.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHT, REAR)
8B.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHTS, FRONT)
8C.	140-9378	[1]	RELAY AS (12-VOLT)(BACKUP ALARM)
8D.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, REAR)
8E.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, FRONT)
9.	172-9200	[1]	SUPPRESSOR-ARC
10.	240-5204	[1]	RESISTOR AS
	5P-5677 D		WIRE (18-GA, BLACK)(0.1-M)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-2225 D		TUBE-HEAT SHRINK (25.4-MM DIA)(4-CM)
	186-3735	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	116-0118	[1]	CLIP
11.	297-8775	[1]	HARNESS AS-CHASSIS
	8T-8737	[74]	PLUG-SEAL
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
		[2]	SEAL-CONNECTOR
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	9X-0146	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM)
	111-6795	[1]	HOUSING-RELAY
	111-6816	[1]	LOCK
	112-9609	[1]	BLOCK-MICRORELAY
	112-9610	[1]	LOCK-MICRORELAY
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM)
	124-9636	[1]	BLOCK-MINIFUSE
	124-9637	[1]	LOCK-MINIFUSE
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(75-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	142-9117	[3]	CONNECTOR (10-PIN)
	160-2246 G		SLEEVE-ABRASION (75.2-IN)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
	180-0050	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGES)
12.	132-5789	[2]	CLIP (LADDER)
13.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
14.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
15.	4B-4863	[3]	WASHER (4.7X11X1.2-MM THK)
16.	5C-2890 M	[1]	NUT (M6X1-THD)
17.	5P-4115	[3]	WASHER-HARD (7.2X19X2-MM THK)
18.	5P-6459	[1]	GROMMET
19.	7K-1181	[10]	STRAP-CABLE
20.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
21.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
23.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#KEBP03050121

300-0531: WIRING GP-PLATFORM

WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM
S/N C2B1-UP; C4B1-UP
PART OF 266-0329 OPERATOR AR
Type 2
AN ATTACHMENT

i04032400 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118 C	[2]	CLIP
8.	140-9378	[6]	RELAY AS (12-VOLT)
9.	172-9200	[1]	SUPPRESSOR-ARC
10.	339-5427 C	[1]	HARNESS AS-CHASSIS
	112-9609	[1]	BLOCK-MICRORELAY
	124-9636	[1]	BLOCK-MINIFUSE
	142-9117	[3]	CONNECTOR (10-PIN)
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	111-6795	[1]	HOUSING-RELAY
	112-9610	[2]	LOCK-MICRORELAY
	124-9637	[1]	LOCK-MINIFUSE
	111-6816	[1]	LOCK
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	253-8112	[1]	PLUG
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	180-0050	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS & WEDGES)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	8T-8737	[71]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	9G-3695	[1]	PLUG-SEAL
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-0146	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	169-0705	[2]	SEAL
	160-2246 G		SLEEVE-ABRASION (75.2-IN)
	180-9340	[126]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	283-8106	[48]	SOCKET-CONNECTOR (20-GA)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	131-1489	[4]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	6H-3592	[1]	TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1492	[3]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	3K-4528	[1]	TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	2L-8065	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	131-1497	[4]	TERMINAL AS-RING (10-GA TO 12-GA)
			(EACH INCLUDES)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	112-9611	[16]	TERMINAL-BLADE (18-GA TO 20-GA)
	112-9612	[12]	TERMINAL-BLADE
	116-4160	[15]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[12]	TERMINAL-BLADE (16-GA TO 18-GA)
	3E-9179	[3]	TERMINAL-RECEPTACLE (14-GA TO 18-GA)
	111-6792	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	111-6793	[1]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)
11.	132-5789 C	[1]	CLIP (LADDER)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
13.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
14.	4B-4863 C	[2]	WASHER (4.7X11X1.2-MM THK)
15.	5C-2890 M	[1]	NUT (M6X1-THD)
16.	5P-4115 C	[2]	WASHER-HARD (7.2X19X2-MM THK)
17.	5P-6459	[1]	GROMMET
18.	7K-1181	[10]	STRAP-CABLE
19.	8T-0337 CM	[1]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
22.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#KEBP03050122

300-0531: WIRING GP-PLATFORM

WIRING GP-PLATFORM

300-0531 WIRING GP-PLATFORM
S/N C2B1-UP; C4B1-UP
PART OF 266-0329 OPERATOR AR
Type 3
AN ATTACHMENT

i04032401 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8298	[1]	CABLE AS
	1S-7251	[2]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(50-CM)
2.	8T-8799	[2]	BOOT (RED)
3.	9G-9154	[1]	CLIP
4.	113-8490	[7]	FUSE (10-AMPERE)
5.	113-8491	[5]	FUSE (15-AMPERE)
6.	113-8492	[4]	FUSE (20-AMPERE)
7.	116-0118	[2]	CLIP
8.	140-9378	[1]	RELAY AS (12-VOLT)(HORN)
8A.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHT, REAR)
8B.	140-9378	[1]	RELAY AS (12-VOLT)(FLOODLIGHTS, FRONT)
8C.	140-9378	[1]	RELAY AS (12-VOLT)(BACKUP ALARM)
8D.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, REAR)
8E.	140-9378	[1]	RELAY AS (12-VOLT)(WATER SPRAY PUMP, FRONT)
9.	172-9200	[1]	SUPPRESSOR-ARC
10.	363-0348 C	[1]	HARNESS AS-CONSOLE
	112-9609	[1]	BLOCK-MICRORELAY
	124-9636	[1]	BLOCK-MINIFUSE
	142-9117	[3]	CONNECTOR (10-PIN)
	9G-4351	[1]	HOUSING-RECEPTACLE (4-GA TO 6-GA)
	111-6795	[1]	HOUSING-RELAY
	112-9610	[2]	LOCK-MICRORELAY
	124-9637	[1]	LOCK-MINIFUSE
	111-6816	[1]	LOCK
	8N-1542	[1]	PIN-CONNECTOR (10-GA)
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	253-8112	[1]	PLUG
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[5]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	9X-4391	[1]	PLUG AS-CONNECTOR (70-PIN)
	3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
	3E-4367	[1]	RING-RETAINING
	9X-5615	[2]	SEAL (INTERFACE, 70-PIN)
	127-5485	[1]	PLUG AS-CONNECTOR (1-PIN)
	8T-8737	[71]	PLUG-SEAL
	7G-7919	[1]	PLUG-SEAL
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	9X-0146	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
	127-5486	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	169-0705	[2]	SEAL
	160-2246 G		SLEEVE-ABRASION (75.2-IN)
	180-9340	[126]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	283-8106	[48]	SOCKET-CONNECTOR (20-GA)
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3L-6513	[1]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	5P-4571	[4]	TERMINAL-BLADE (14-GA TO 16-GA)
	131-1489	[4]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	6H-3592	[1]	TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	131-1492	[3]	TERMINAL AS-RING (6-GA TO 8-GA)
			(EACH INCLUDES)
	3K-4528	[1]	TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM)
	2L-8065	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	131-1497	[4]	TERMINAL AS-RING (10-GA TO 12-GA)
			(EACH INCLUDES)
	2L-8068	[1]	TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	2L-8075	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	112-9611	[16]	TERMINAL-BLADE (18-GA TO 20-GA)
	112-9612	[12]	TERMINAL-BLADE
	116-4160	[15]	TERMINAL-BLADE (12-GA TO 14-GA)
	116-4161	[12]	TERMINAL-BLADE (16-GA TO 18-GA)
	3E-9179	[3]	TERMINAL-RECEPTACLE (14-GA TO 18-GA)
	111-6792	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	111-6793	[1]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	281-3119	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
11.	132-5789	[1]	CLIP (LADDER)
12.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
13.	150-1293 M	[1]	SCREW-BUTTON HEAD (M4X0.7X12-MM)
14.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
15.	5C-2890 M	[1]	NUT (M6X1-THD)
16.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
17.	5P-6459	[1]	GROMMET
18.	7K-1181	[10]	STRAP-CABLE
19.	8T-0337 M	[1]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
22.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	8T-4244 M	[3]	NUT (M12X1.75-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

#KEBP03050123

250-9803: CONTROL GP-TRACTION

CONTROL GP-TRACTION

250-9803 CONTROL GP-TRACTION
S/N C2B1-UP
PART OF 250-9852 ELECTRICAL AR
AN ATTACHMENT

i02208218 KEBP0305

2509803 CONTROL GP-TRACTION Parts scheme

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-2296	[1]	SWITCH AS-PUSH BUTTON (TRACTION CONTROL)
	1B-2578	[2]	NUT (3/8-16-THD)
	9F-5644	[2]	LOCKWASHER
2.	8L-9801	[1]	LAMP (12-VOLT)
3.	9D-3127	[1]	BASE AS-INDICATOR LIGHT (TRACTION CONTROL)
	6V-8367	[1]	LOCKWASHER
	6V-8382	[1]	NUT-HEX (11/16-27-THD)
4.	087-0812	[1]	LENS-CLEAR
5.	107-2539	[1]	FILM-INSTRUCTION (DIFFERENTIAL LOCK)
6.	161-6846	[1]	SUPPORT AS
	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
	8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
7.		[1]	HOOD
8.	227-9567	[1]	CONTROL GP-ELECTRONIC (TRACTION CONTROL)
9.	246-7248	[1]	PLATE
10.	099-0492 M	[4]	LOCKNUT (M6X1-THD)
11.	4B-4274	[4]	WASHER (5.5X13X1.2-MM THK)
12.	6V-7357 M	[2]	BOLT (M6X1X25-MM)
13.	8P-8540	[2]	GROMMET
14.	8T-0288 M	[4]	BOLT (M5X0.8X12-MM)
15.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
16.	8T-4224	[8]	WASHER-HARD (8.8X16X2-MM THK)
17.	8T-4971 M	[4]	BOLT (M6X1X30-MM)
18.	9X-8256	[10]	WASHER (6.6X12X2-MM THK)
19.	8T-4908 M	[3]	BOLT (M8X1.25X25-MM)
20.	5C-7261 M	[3]	NUT (M8X1.25-THD)
	M		METRIC PART

#KEBP03050124

194-2961: DRIVE GP-DRUM

DRIVE GP-DRUM

194-2961 DRIVE GP-DRUM
S/N C2B1-UP; C4B1-UP
PART OF 189-5898 POWER TRAIN AR
AN ATTACHMENT

i02252297 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	108-2079 M	[20]	NUT (M22X1.5-THD)
2.	185-5622	[2]	BEARING AS (DRUM)
			(EACH INCLUDES)
	2D-4867	[2]	FITTING-GREASE (1/8-27 PTF)
3.	234-1649 Y	[1]	PLANETARY GP-FINAL DRIVE (REAR)
4.	234-1650 Y	[1]	PLANETARY GP-FINAL DRIVE (FRONT)
5.	150-3033	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	8T-0164	[1]	ELBOW
6.	7X-2555 M	[48]	BOLT (M16X2X80-MM)
7.	8C-6913	[20]	WASHER-HARD (24X41.5X4-MM THK)
8.	8T-0348 M	[34]	BOLT-SOCKET HEAD (M16X2X50-MM)
9.	8T-4173 M	[44]	BOLT (M16X2X110-MM)
10.	9X-8257	[78]	WASHER (17.5X30X3.5-MM THK)
11.	1N-5999	[4]	PLUG-O-RING
12.	7J-0204	[4]	SEAL-O-RING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#KEBP03050125

189-2504: DRUM GP-COMPACTOR

DRUM GP-COMPACTOR

189-2504 DRUM GP-COMPACTOR
S/N C2B1-UP
PART OF 207-5362 POWER TRAIN AR
AN ATTACHMENT

i02226612 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	189-2505	[1]	DRUM AS (SMOOTH)
	5C-3370	[1]	BOSS
2.	189-2508	[1]	PLATE
3.	189-2509	[1]	PLATE
4.	227-0171	[16]	MOUNT
5.	8T-4123	[32]	WASHER (22X35X3.5-MM THK)
6.	8T-5460 M	[32]	BOLT (M20X2.5X40-MM)
	M		METRIC PART

#KEBP03050126

227-9589: DRUM GP-COMPACTOR

DRUM GP-COMPACTOR

227-9589 DRUM GP-COMPACTOR
S/N C2B1-UP
PART OF 227-9564 POWER TRAIN AR
AN ATTACHMENT

i02226619 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7R-7941	[2]	CLAMP
2.	7R-7951	[1]	PLATE
3.	258-7079 B	[2]	SHIM (0.5-MM THK)
4.	266-1490 I	[1]	HOSE AS
5.	266-1655	[1]	DRUM AS
6.	150-4049	[1]	ELBOW AS
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
	8T-4149	[1]	ELBOW
7.	6V-5057	[2]	SEAL-O-RING
8.	6V-8200 M	[4]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
9.	6V-9798 M	[2]	BOLT (M6X1X80-MM)
10.	6V-9832	[1]	CAP (ORFS)(AUX HYD FUNCTION)
11.	7X-0515	[32]	WASHER-HARD (17X35X5-MM THK)
12.	7X-2555 M	[32]	BOLT (M16X2X80-MM)
13.	6V-9746	[1]	SEAL-O-RING
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#KEBP03050127

257-7788: DRUM GP-COMPACTOR

DRUM GP-COMPACTOR

257-7788 DRUM GP-COMPACTOR
S/N C2B1-UP
PART OF 280-3463 POWER TRAIN AR
AN ATTACHMENT

i02421728 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	227-0171	[16]	MOUNT
2.	257-7789	[1]	DRUM AS (SMOOTH)
	5C-3370	[1]	BOSS
3.	257-7791	[1]	PLATE
4.	257-7792	[1]	PLATE
5.	8T-4123	[32]	WASHER (22X35X3.5-MM THK)
6.	8T-5460 M	[32]	BOLT (M20X2.5X40-MM)
	M		METRIC PART

#KEBP03050128

207-1465: DRUM GP-SMOOTH

DRUM GP-SMOOTH

207-1465 DRUM GP-SMOOTH
S/N C4B1-UP
PART OF 207-5367, 283-1161 POWER TRAIN AR
AN ATTACHMENT

i02254207 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	189-2508	[1]	PLATE
2.	189-2509	[1]	PLATE
3.	207-1467	[1]	DRUM AS (SMOOTH)
	5C-3370	[1]	BOSS
4.	209-9950	[4]	WEIGHT
5.	227-0171	[16]	MOUNT
6.	7X-2564 M	[16]	BOLT (M20X2.5X90-MM)
7.	8T-4123	[40]	WASHER (22X35X3.5-MM THK)
8.	8T-5460 M	[24]	BOLT (M20X2.5X40-MM)
	M		METRIC PART

#KEBP03050129

227-9572: HYDRAULIC AR-PROPEL

HYDRAULIC AR-PROPEL

227-9572 HYDRAULIC AR-PROPEL
S/N C2B1-UP
PART OF 227-9564 POWER TRAIN AR
AN ATTACHMENT

i02208222 KEBP0305

For full view, you need register

Parts for your CB-534D VIBRATORY COMPACTOR:

CATERPILLAR SIS

Part No	Qty	Parts name
228-0461 Y	[1]	LINES GP-FLUSHING
227-9584 Y	[1]	LINES GP-PROPEL
227-9596 Y	[1]	LINES GP-SERVICE BRAKE
227-9578 Y	[2]	MOTOR & MTG GP-PROPEL
189-8680 Y	[1]	PUMP & MTG GP-BRAKE (MANUAL RELEASE)
253-4538 Y	[1]	PUMP & MTG GP-PROPEL
246-7247 Y	[1]	VALVE & MTG GP-FLUSHING
227-9580 Y	[1]	VALVE & MTG GP-SOLENOID (PROPEL)
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Engine Starting with Auxiliary Start Receptacle
CB-534D and CB-564D Asphalt Compactors

Battery or Battery Cable - Inspect/Replace
CB-534D and CB-564D Asphalt Compactors

Battery Disconnect Switch
CB-534D and CB-564D Asphalt Compactors

Alert Indicators
CB-534D and CB-564D Asphalt Compactors

Light Switches
CB-534D and CB-564D Asphalt Compactors

Window Wiper and Washer Control - If Equipped
CB-534D and CB-564D Asphalt Compactors

Drum Offset Control - If Equipped
CB-534D and CB-564D Asphalt Compactors

Circuit Breakers - Reset
CB-534D and CB-564D Asphalt Compactors

Battery - Clean/Check
CB-534D and CB-564D Asphalt Compactors

Directional Turn Signal and Hazard Flasher Control - If Equipped
CB-534D and CB-564D Asphalt Compactors

Fuses - Replace
CB-534D and CB-564D Asphalt Compactors

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Procedure to Install Improved Control System on Certain Asphalt Compactors{1408, 3065, 5070, 5462, 7620}
Procedure to Install Improved Control System on Certain Asphalt Compactors{1408, 3065, 5070, 5462, 7620}

Procedure to Install a New Parking Brake Switch on Certain Paving Compactors{1408, 4267}
Procedure to Install a New Parking Brake Switch on Certain Paving Compactors{1408, 4267}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW MACHINE ECM SOFTWARE AND REPLACING THE PROPEL PUMP EDC ON CERTAIN CB-434D AND CB-534D ASPHALT COMPACTORS CONFIGURED WITH ITIALIAN ROAD HOMOLOGATION
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW MACHINE ECM SOFTWARE AND REPLACING THE PROPEL PUMP EDC ON CERTAIN CB-434D AND CB-534D ASPHALT COMPACTORS CONFIGURED WITH ITIALIAN ROAD HOMOLOGATION

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Americas

Specifications

Platform Wiring
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems

Engine Wiring
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Service Letter-Asia

Systems Operation

Electronic Control Module (Machine)
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System

Location of Electrical Components
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System

Water Spray Electrical System
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems

Steering Electrical System
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems

Electrical Input Components
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System

Electrical Output Components
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Vibratory System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK

Testing and Adjusting

Electric Starting System - Test
3054C Engines for Caterpillar Built Machines

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

Troubleshooting

Wiring Harness (Short Circuit) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

Wiring Harness (Open Circuit) - Test
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Electrical Connector - Inspect
CB-434D, CB-534D, CB-534D Series XW and CB-564D Paving Compactors

Connector Locations
CB-434D, CB-534D and CB-564D Asphalt Compactors

Harness Jumper (Vibratory Configuration) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

Harness Jumper (Drum Offset) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

Harness Jumper (Model Configuration) - Test
CB-434D, CB-534D and CB-564D Asphalt Compactors

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Disassembly and Assembly

Battery and Battery Cable - Separate and Connect
CB-534D, CB-534D XW and CB-564D
Vibratory Compactors Machine Systems

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A New Procedure to Test the Solenoid is Now Available for the Throttle Control on Paving Compactors and Asphalt Pavers {1264, 1265, 1408}
2009/02/02

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog CB-534D :

265-5806 WIRING GP-PLATFORM

202-0030 WIRING GP-PLATFORM

249-6994 WIRING GP-MACHINE

205-8118 WIRING GP-MACHINE

205-8117 WIRING GP-ENGINE

283-4450 WIRING GP-CONSOLE

237-0183 WARNING GP-BACKUP

225-8542 SWITCH GP-POSITION

300-0531 WIRING GP-PLATFORM

250-9803 CONTROL GP-TRACTION

194-2961 DRIVE GP-DRUM

189-2504 DRUM GP-COMPACTOR

227-9589 DRUM GP-COMPACTOR

257-7788 DRUM GP-COMPACTOR

207-1465 DRUM GP-SMOOTH

Truck sale:

70,000 USD

Caterpillar CB-534D, Construction
- Twin drum rollers
FINNING ARGENTINA S.A.
Argentina

65,000 USD

Caterpillar CB-534D, Construction
- Twin drum rollers
FINNING ARGENTINA S.A.
Argentina

17,737

Caterpillar CB-534D, Construction
- Twin drum rollers
FINNING CANADA (SASKATCHEWAN)
Canada

118,000

Caterpillar CB-534D, Construction
- Twin drum rollers
GENTRAC
Guatemala

61,489

Caterpillar CB-534D, Construction
- Twin drum rollers
HASTINGS DEERING (AUSTRALIA)
Australia