AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

353-0186 GEAR GP-CAMSHAFT S/N TXH1276-UP; RHX1-UP DUAL CAM SENSORS PART OF 207-0449 GEAR GP-FRONT ALSO AN ATTACHMENT PM-200


BASIC ENGINE
CAMSHAFT GP
GEAR GP
AIR COMPRESSOR GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
CYLINDER HEAD GP

COLD PLANER PM-200 COLD PLANER P1C
 PM-200 Cold Planer P1C00001-UP (MACHINE) POWERED BY C18 Engine KEBP0308 PM-200 P1C   (2005)

BASIC ENGINE

CAMSHAFT GP
CAMSHAFT GP
243-0551 CAMSHAFT GP
GEAR GP-CAMSHAFT
353-0186 GEAR GP-CAMSHAFT
 

#KEBP03080080
 

353-0186: GEAR GP-CAMSHAFT

353-0186 GEAR GP-CAMSHAFT
S/N TXH1276-UP; RHX1-UP
DUAL CAM SENSORS
PART OF 207-0449 GEAR GP-FRONT
ALSO AN ATTACHMENT
i05215839 KEBP0308
3530186 GEAR GP-CAMSHAFT Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [8] BOLT (3/8-16X1.75-IN)  
2. 103-0126 [1] DOWEL  
 

#KEBP03080081
 

207-0449: GEAR GP-FRONT

207-0449 GEAR GP-FRONT
S/N TXH1276-UP; RHX1-UP
SHOT-PEENED CLUSTER IDLER AND AN 8 BOLT CAM GEAR RETAINER
PART OF 241-5935, 294-3050, 357-6485, 359-0364 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02305273 KEBP0308
2070449 GEAR GP-FRONT Parts scheme 2070449 GEAR GP-FRONT Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 2J-3118 [5] BOLT-LOCKING (3/8-16X1.25-IN)  
3. 5P-4142 [2] BOLT-LOCKING (3/8-16X1.5-IN)  
4. 1B-8705 [1] KEY-WOODRUFF  
5. 1P-7346 [1] WASHER-HARD (10.2X35X6-MM THK)  
6. 126-1756 [10] BOLT-LOCKING (5/16-18X0.875-IN)  
7. 112-9217 [1] PLATE-THRUST  
8. 130-4701 [1] GEAR AS (56-TEETH)  
  130-4698 [1] BUSHING  
9. 151-5966 [1] SHAFT AS-STUB  
  6I-3623 [1] DOWEL  
10. 6I-3624 [2] PLATE-THRUST  
11. 6I-3625 [1] GEAR AS (71-TEETH)  
  101-8468 [1] BUSHING  
12. 353-0186 Y [1] GEAR GP-CAMSHAFT  
13. 197-4971 [1] SHAFT-STUB  
14. 158-3416 [1] SHAFT-STUB  
15. 031-3185 [6] BOLT-12 POINT HEAD (5/8-11X3-IN)  
16. 149-9110 [1] GEAR-OIL PUMP DRIVE (69-TEETH)  
17. 9S-8752 [10] NUT-FULL (3/8-16-THD)  
18. 9X-6458 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
19. 117-8801 [1] SEAL-O-RING  
20. 5E-8771 [1] SEAL-O-RING  
21. 159-1533 [1] PLATE-SEALING  
22. 159-8524 [1] ADAPTER AS  
  6V-3677 [1] DOWEL  
23. 102-5861 [1] PLATE-THRUST  
24. 107-0583 [3] BOLT-LOCKING (1/4-20X0.87-IN)  
25. 187-8979 [1] GEAR AS (105, 63-TEETH)  
  1B-8705 [1] KEY-WOODRUFF  
  6I-4582 [1] GEAR (63-TEETH)(SMALL CLUSTER)  
  131-7123 [1] BUSHING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080082
 

236-1794: GEAR GP-REAR

236-1794 GEAR GP-REAR
S/N TXH1276-UP; RHX1-UP
PART OF 234-7925, 352-6168, 380-9911, 380-9912, 380-9913, 417-9325 ENGINE AR-COMPLETE
FOR USE WITH DUAL 1.24:1 DRIVE RATIO PTO GEARS WITH 23 TOOTH INTERNAL 16/32 SPLINE
ALSO AN ATTACHMENT
i02304583 KEBP0308
2361794 GEAR GP-REAR Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 206-4225 [2] GEAR AS (59-TEETH)  
2. 209-9771 [2] RETAINER AS  
    (EACH INCLUDES)
  5B-5821 [1] DOWEL  
3. 229-1476 [2] ADAPTER AS  
    (EACH INCLUDES)
  209-8624 [1] BUSHING  
4. 237-7310 [1] GEAR AS-CRANKSHAFT (51-TEETH)  
  4N-0684 [1] DOWEL  
5. 241-2657 [2] GEAR AS-PUMP (41-TEETH)  
    (EACH INCLUDES)
  4F-6024 [1] PIN  
6. 136-4183 M [12] BOLT-12 POINT HEAD (M10X1.5X30-MM)  
7. 189-6123 M [8] BOLT-12 POINT HEAD (M12X1.75X60-MM)  
8. 6V-5141 [2] SEAL-O-RING  
9. 229-1479 [2] COVER  
10. 0S-1621 [8] BOLT (1/2-13X1-IN)  
  M   METRIC PART
 

#KEBP03080083
 

262-4154: GOVERNOR GP-AIR COMPRESSOR

262-4154 GOVERNOR GP-AIR COMPRESSOR
S/N TXH1276-UP; RHX1-UP
PART OF 234-7925, 352-6168, 380-9911, 380-9912, 380-9913, 417-9325 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02478723 KEBP0308
2624154 GOVERNOR GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9680 [1] GOVERNOR GP-AIR COMPRESSOR  
1A. 2S-2923 [1] COVER AS (GOVERNOR)  
  9M-0402 [1] KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)  
    (INCLUDES GROMMETS, FILTERS, SPRING, VALVE, COVER, RING, & GASKET)
2. 6L-1883 [2] GASKET  
3. 179-4787 [1] ADAPTER  
4. 0S-1617 [2] BOLT (5/16-18X0.75-IN)  
5. 6V-5221 M [2] BOLT (M8X1.25X80-MM)  
6. 8T-6757 [3] PLUG-PIPE  
7. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#KEBP03080084
 

220-6368: HOUSING GP-FLYWHEEL

220-6368 HOUSING GP-FLYWHEEL
S/N RHX1-9114
PART OF 234-7925 ENGINE AR-COMPLETE
i02304587 KEBP0308
2206368 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING)  
2. 148-8411 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)(3/4-16 THD)  
  3K-0360 [1] SEAL-O-RING  
3. 155-5619 [1] GASKET  
4. 175-3721 [2] COVER  
5. 220-8217 [1] HOUSING AS-FLYWHEEL  
  1W-3136 [1] BAFFLE  
  209-8622 [2] BUSHING  
6. 148-8395 [2] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)(3/4-16 THD)  
  3K-0360 [1] SEAL-O-RING  
7. 155-3624 [4] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)(7/16-20 THD)  
8. 165-3930 [7] BOLT (3/8-16X1.625-IN)  
9. 1J-9671 [1] SEAL-O-RING  
10. 223-4903 [6] BOLT (3/8-16X5-IN)  
11. 2P-2772 [1] COVER  
12. 4M-0189 [2] SEAL-O-RING  
13. 234-8937 [1] SEAL-INTEGRAL  
14. 5J-5793 [1] BOLT-12 POINT HEAD (1/2-13X2-IN)  
15. 5J-5794 [8] BOLT (1/2-13X3.5-IN)  
16. 5P-8245 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6A-5591 M [4] BOLT (M12X1.75X25-MM)  
18. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
19. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
20. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
21. 9S-8003 [1] PLUG (1/2-20-THD)(1/2-20 THD)  
22. 165-3932 [1] BOLT (3/8-16X2-IN)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080085
 

220-6368: HOUSING GP-FLYWHEEL

220-6368 HOUSING GP-FLYWHEEL
S/N RHX9115-UP
PART OF 234-7925, 352-6168 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i04002077 KEBP0308
2206368 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-5619 [1] GASKET  
2. 175-3721 [2] COVER  
3. 220-8217 [1] HOUSING AS-FLYWHEEL  
  1W-3136 [1] BAFFLE  
  209-8622 [2] BUSHING  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING)  
5. 165-3930 [7] BOLT (3/8-16X1.625-IN)  
6. 165-3932 [1] BOLT (3/8-16X2-IN)  
7. 223-4903 [6] BOLT (3/8-16X5-IN)  
8. 234-8937 [1] SEAL-INTEGRAL  
9. 2P-2772 [1] COVER  
10. 307-2671 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8002 [1] PLUG (7/16-20-THD)(8.92MM ID)  
  214-7566 [1] SEAL-O-RING (7/16-20 THD)  
11. 307-2673 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)(3/4-16 THD)  
  238-5080 [1] SEAL-O-RING (16.36MM ID)  
12. 321-8642 C [1] PLUG AS (10.52MM ID)  
  9S-8003 [1] PLUG (1/2-20-THD)  
  214-7567 [1] SEAL-O-RING  
13. 4M-0189 [2] SEAL-O-RING (104.37MM ID)  
14. 5J-5793 [1] BOLT-12 POINT HEAD (1/2-13X2-IN)  
15. 338-4562 [8] BOLT-12 POINT HEAD (1/2-13X3.5 IN)  
16. 5P-8245 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6A-5591 M [4] BOLT (M12X1.75X25-MM)  
18. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
19. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
20. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080086
 

220-6368: HOUSING GP-FLYWHEEL

220-6368 HOUSING GP-FLYWHEEL
S/N RHX10023-UP
PART OF 352-6168 ENGINE AR-COMPLETE
AN ATTACHMENT
i04775481 KEBP0308
2206368 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-5619 [1] GASKET  
2. 175-3721 [2] COVER  
3. 220-8217 [1] HOUSING AS-FLYWHEEL  
  1W-3136 [1] BAFFLE  
  209-8622 [2] BUSHING  
4. 319-0785 Y [1] SEAL GP-CRANKSHAFT (REAR)(REAR FLYWHEEL HOUSING)  
5. 165-3930 [7] BOLT (3/8-16X1.625-IN)  
6. 165-3932 [1] BOLT (3/8-16X2-IN)  
7. 223-4903 [6] BOLT (3/8-16X5-IN)  
8. 234-8937 [1] SEAL-INTEGRAL  
9. 2P-2772 [1] COVER  
10. 307-2671 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8002 [1] PLUG (7/16-20-THD)(8.92MM ID)  
  214-7566 [1] SEAL-O-RING (7/16-20 THD)  
11. 307-2673 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)(3/4-16 THD)  
  238-5080 [1] SEAL-O-RING (16.36MM ID)  
12. 347-4402 C [1] PLUG AS (10.52MM ID)  
  3K-8460 [1] PLUG (1/2-20-THD)  
  214-7567 [1] SEAL-O-RING  
13. 4M-0189 [2] SEAL-O-RING (104.37MM ID)  
14. 5J-5793 [1] BOLT-12 POINT HEAD (1/2-13X2-IN)  
15. 338-4562 C [8] BOLT-12 POINT HEAD (1/2-13X3.5 IN)  
16. 5P-8245 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6A-5591 M [4] BOLT (M12X1.75X25-MM)  
18. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
19. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
20. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080087
 

368-6467: HOUSING GP-FLYWHEEL

368-6467 HOUSING GP-FLYWHEEL
S/N TXH1276-UP; RHX1-UP
PROVIDES CAT 3/4 HOUSING 12 M12X1.75 TRANS BORE. 8 M16X2 SIDE MTG, BOTH SIDES. LEFT, RIGHT STARTER MOUNTING. DUAL RPTO. MOUNTING DOUBLE LIP CRANKSHAFT SEAL.
PART OF 234-7925, 380-9911, 380-9912, 380-9913, 417-9325 ENGINE AR-COMPLETE
FOR USE WITH WET HOUSING APPLICATIONS
ALSO AN ATTACHMENT
i04988670 KEBP0308
3686467 HOUSING GP-FLYWHEEL Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-5619 [1] GASKET  
2. 175-3721 [2] COVER  
3. 220-8217 [1] HOUSING AS-FLYWHEEL  
  1W-3136 [1] BAFFLE  
  209-8622 [2] BUSHING  
4. 366-6145 Y [1] SEAL GP-CRANKSHAFT  
5. 165-3930 [7] BOLT (3/8-16X1.625-IN)  
6. 165-3932 [1] BOLT (3/8-16X2-IN)  
7. 223-4903 [6] BOLT (3/8-16X5-IN)  
8. 234-8937 [1] SEAL-INTEGRAL  
9. 2P-2772 [1] COVER  
10. 307-2671 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8002 [1] PLUG (7/16-20-THD)  
  214-7566 [1] SEAL-O-RING  
11. 307-2673 [4] PLUG AS  
    (EACH INCLUDES)
  9S-8005 [1] PLUG (3/4-16-THD)  
  238-5080 [1] SEAL-O-RING  
12. 321-8642 [1] PLUG AS  
  9S-8003 [1] PLUG (1/2-20-THD)  
  214-7567 [1] SEAL-O-RING  
13. 338-4562 [8] BOLT-12 POINT HEAD (1/2-13X3.5 IN)  
14. 4M-0189 [2] SEAL-O-RING  
15. 5J-5793 [1] BOLT-12 POINT HEAD (1/2-13X2-IN)  
16. 5P-8245 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 6A-5591 M [4] BOLT (M12X1.75X25-MM)  
18. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
19. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
20. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080088
 

159-8616: HOUSING GP-FRONT

159-8616 HOUSING GP-FRONT
S/N TXH1276-UP; RHX1-UP
NO SOUND SUPPRESSION
PART OF 234-7925, 352-6168, 380-9911, 380-9912, 380-9913, 417-9325 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENER AND ALTERNATOR MOUNTING
ALSO AN ATTACHMENT
i02302737 KEBP0308
1598616 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-1483 [1] HOUSING AS-FRONT  
1A. 3E-8044 [1] STUD (1/2-13X2.95-IN)  
2. 5P-4255 [8] BOLT-LOCKING (3/8-16X1-IN)  
3. 5M-2894 [34] WASHER-HARD (10.2X18.5X2.5-MM THK)  
4. 0S-1588 [11] BOLT (3/8-16X1.25-IN)  
5. 6I-3968 [1] BRACKET-SUPPORT  
6. 155-9524 [1] SEAL-INTEGRAL  
7. 353-9979 Y [1] PLATE AS-FRONT HOUSING  
8. 166-9144 [1] GASKET  
9. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
10. 0T-0055 [9] BOLT (3/8-16X4.25-IN)  
11. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
12. 7C-1445 [1] COVER  
13. 061-9455 [1] SEAL-O-RING  
14. 0S-1591 [2] BOLT (3/8-16X1.5-IN)  
15. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
16. 8S-9191 [1] BOLT (3/8-16X4-IN)  
17. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03080089
 

556-3680: KIT-CYLINDER HEAD GASKET

556-3680 KIT-CYLINDER HEAD GASKET
S/N TXH1-UP; RHX1-UP
SINGLE CYLINDER HEAD
FOR USE WITH @@@@@234-7925@@@@@
FIELD INSTALLATION
i07391200 KEBP0308
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2N-2765 [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
  1S-4295 [1] GASKET (TURBOCHARGER)  
  101-3125 [1] GASKET (AIR INLET MANIFOLD)  
  227-1204 [1] GASKET  
  359-0908 [1] GASKET-CYLINDER HEAD  
  139-3550 [1] GASKET-REGULATOR (HOUSING)  
  4N-1156 [1] GASKET-REGULATOR COVER  
  149-7378 [18] GROMMET  
  391-2167 [4] LOCKNUT-FLANGE (3/8X16-THD)  
  3E-6772 [24] SEAL (WATER)  
  142-2329 [1] SEAL  
  160-7271 [1] SEAL  
  272-0390 [1] SEAL  
  126-2702 [1] SEAL-INTEGRAL  
  198-6068 [1] SEAL-INTEGRAL  
  3S-9643 [2] SEAL-LIP TYPE  
  5E-8771 [1] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  6V-3251 [1] SEAL-O-RING  
  6V-6609 [5] SEAL-O-RING  
  6V-9027 [1] SEAL-O-RING  
  117-8801 [1] SEAL-O-RING  
  214-7566 [2] SEAL-O-RING  
  214-7568 [12] SEAL-O-RING  
  228-7089 [2] SEAL-O-RING  
  238-5078 [2] SEAL-O-RING  
  238-5080 [3] SEAL-O-RING  
  272-2583 [1] SEAL-O-RING  
  242-9537 [3] SEAL-VALVE COVER  
  281-8261 [6] SLEEVE AS-EXHAUST  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

Information:

Specifications
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Camshaft
C15 and C18 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Remove
C15 and C18 Engines for Caterpillar Built Machines
Camshaft - Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
A New Improved Cam Gear Is Now Available for the Engines of Certain Machines {1212}
2013/06/19
Improved Camshafts Are Now Used on Certain C15 and C18 Machine Engines {1210}
2013/08/22
An Improved Camshaft Gear is Now Used on Certain C15 and C18 Machine Engines {1212}
An Improved Camshaft Gear is Now Used on Certain C15 and C18 Machine Engines {1212}

Caterpillar Parts SIS Catalog PM-200 :

FLYWHEEL GP
236-1790 FLYWHEEL GP
FLYWHEEL AS
7W-3499 FLYWHEEL AS
FASTENER GP-VALVE MECHANISM
109-1657 FASTENER GP-VALVE MECHANISM
FASTENER GP-FRONT HOUSING
4P-6846 FASTENER GP-FRONT HOUSING
FASTENER GP-FRONT HOUSING
108-9382 FASTENER GP-FRONT HOUSING
DAMPER GP
227-3705 DAMPER GP
DAMPER & PULLEY GP
345-8397 DAMPER & PULLEY GP
CYLINDER HEAD GP
432-5472 CYLINDER HEAD GP
GEAR GP-FRONT
207-0449 GEAR GP-FRONT
GEAR GP-REAR
236-1794 GEAR GP-REAR
GOVERNOR GP-AIR COMPRESSOR
262-4154 GOVERNOR GP-AIR COMPRESSOR
HOUSING GP-FLYWHEEL
220-6368 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
220-6368 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
220-6368 HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
368-6467 HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT

Truck sale:

Caterpillar PM-200
 
Caterpillar PM-200
- Asphalt cold milling machines
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
 
118.989 
Caterpillar PM200, Strassenfertiger, Bau-Und Bergbauausrüstung


Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
 
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
- Asphalt cold milling machines
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
 
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
- Asphalt cold milling machines
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar PM-200, Construction
 
Caterpillar PM-200, Construction
- Asphalt cold milling machines
CATERPILLAR CREDITO, S.A. DE C.V.
Mexico
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.