ELECTRICAL AND STARTING SYSTEM
GENERATOR GPGLOW PLUG GP
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
GENERATOR GP
#KEBP03110130
270-5315: GENERATOR GP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 8X-6645 C | [1] | STRAP AS-GROUND | |
| 3. | 7H-3937 C | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 4. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 5. | 197-9642 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 6. | 220-1209 | [1] | BELT TENSIONER | |
| 7. | 228-4798 | [1] | FILM-IDENTIFICATION (GROUND) | |
| 8. | 255-5011 | [1] | RELAY AS (24-VOLT)(SCREED HEAT) | |
| 9. | 270-3558 | [1] | BUSHING | |
| 11. | 276-8166 | [1] | SPACER (12X40X7-MM THK) | |
| 12. | 417-5522 C | [1] | PLATE | |
| 13. | 284-2886 | [1] | SHEAVE | |
| 14. | 417-5523 C | [1] | PLATE | |
| 15. | 286-9960 | [1] | BRACKET AS | |
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 16. | 363-7389 | [1] | BELT-SERPENTINE (ALTERNATOR AIR) | |
| 17. | 324-3727 | [1] | BRACKET AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 18. | 421-4076 C | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 21. | 420-0612 C | [2] | WIRE AS-GROUND | |
| 23. | 398-8389 | [1] | STUD | |
| 24. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 25. | 148-8411 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 26. | 164-4180 | [1] | PLUG AS (TRANSMISSION CASE) | |
| 7M-8485 | [1] | SEAL-O-RING | ||
| 9S-4181 | [1] | PLUG (5/16-12-THD) | ||
| 27. | 164-5616 | [1] | PLUG AS (HYDRAULIC TANK) | |
| 2S-4078 | [1] | SEAL-O-RING | ||
| 9S-6130 | [1] | PLUG | ||
| 28. | 3B-4504 | [3] | LOCKWASHER | |
| 29. | 3J-4818 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 30. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 31. | 4M-5282 | [3] | BOLT (1/4-20X1.5-IN) | |
| 32. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 33. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 34. | 5C-7261 CM | [2] | NUT (M8X1.25-THD) | |
| 35. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 36. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 37. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 38. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 39. | 6V-9830 | [1] | CAP AS | |
| 43. | 7X-2537 M | [5] | BOLT (M8X1.25X35-MM) | |
| 44. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 45. | 8T-3998 M | [2] | BOLT (M4X0.7X12-MM) | |
| 46. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 47. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 48. | 8T-4133 CM | [3] | NUT (M10X1.5-THD) | |
| 49. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 50. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 51. | 8T-4186 M | [3] | BOLT (M10X1.5X40-MM) | |
| 52. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 53. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 54. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 55. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 56. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 57. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 58. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 59. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 60. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 61. | 8T-4971 M | [1] | BOLT (M6X1X30-MM) | |
| 63. | 128-2596 D | SEAL (0.5-M) | ||
| 64. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 65. | 8F-7242 C | [2] | WASHER (8.7X15.9X1.6-MM THK) | |
| 66. | 445-7531 | [1] | WIRE AS-GROUND | |
| 67. | 459-1872 C | [1] | PLATE | |
| 68. | 418-2328 C | [1] | HARNESS AS-SOLENOID | |
| 5P-4571 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 194-5226 | [2] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [2] | WIRE AS (14-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 69. | 417-5521 C | [1] | PLATE | |
| 70. | 399-5150 C | [1] | GENERATOR GP-HYDRAULIC | |
| 71. | 384-3506 C | [1] | HARNESS AS-LIGHTING (SIDE FLOOD, RH, LH) | |
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (KIT INCLUDES RECEPTACLE AS & INTERFACE SEAL) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (KIT INCLUDES PLUG AS & WEDGE) | ||||
| 72. | 344-5674 CM | [5] | NUT (M8X1.25-THD) | |
| 73. | 290-5562 C | [1] | MOUNT (DUAL SWIVEL) | |
| 74. | 7K-1181 C | [5] | STRAP-CABLE (5.72-MM DIA) | |
| 75. | 3S-2093 C | [4] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#KEBP03110131
289-5220: GENERATOR GP
289-5220 GENERATOR GP -HYDRAULIC-23-KW
S/N MAT1-203
PART OF 270-6762 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N MAT1-203
PART OF 270-6762 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 2. | 231-1332 Y | [1] | GENERATOR GP (23-KW) | |
| 3. | 247-4947 | [1] | FILM-INFORMATION (CIRCUIT BREAKER) | |
| 4. | 276-8163 | [1] | PLATE | |
| 5. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 6. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 7. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 8. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 9. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 10. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 11. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 12. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 13. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 15. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110132
289-5220: GENERATOR GP
289-5220 GENERATOR GP -HYDRAULIC-23-KW
S/N MAT204-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N MAT204-UP
PART OF 270-6762 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 2. | 231-1332 Y | [1] | GENERATOR GP (23-KW) | |
| 3. | 276-8163 C | [1] | PLATE | |
| 4. | 322-7952 | [1] | FILM-IDENTIFICATION (CIRCUIT BREAKER) | |
| 5. | 367-6889 | [2] | WIRE AS-GROUND | |
| 6. | 398-8389 | [1] | STUD | |
| 7. | 445-7531 | [1] | WIRE AS-GROUND | |
| 8. | 099-2374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X12-MM) | |
| 9. | 1A-8912 | [2] | WASHER (6.7X12.7X1.6-MM THK) | |
| 10. | 1H-3338 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 11. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 12. | 5C-2874 M | [2] | NUT (M5X0.8-THD) | |
| 13. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 14. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 15. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 5P-4115 | [1] | WASHER-HARD (7.2X19X2-MM THK) | |
| 17. | 6V-7687 M | [4] | LOCKNUT (M12X1.75-THD) | |
| 18. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 19. | 7F-6998 | [1] | LOCKWASHER | |
| 20. | 7H-3937 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 21. | 7P-1695 | [3] | WASHER (10.5X19X3-MM THK) | |
| 22. | 8F-7242 | [1] | WASHER (8.7X15.9X1.6-MM THK) | |
| 23. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 24. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 25. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 26. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 27. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 29. | 8T-4896 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 30. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| 31. | 8T-7353 M | [1] | BOLT-HIGH TEMPERATURE (M10X1.5X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03110133
288-4229: GENERATOR GP-HYDRAULIC
288-4229 GENERATOR GP-HYDRAULIC
S/N MAT1-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
S/N MAT1-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9F-3272 | [1] | BALL BEARING | |
| 2. | 261-3536 | [1] | FAN | |
| 3. | 232-0743 | [5] | MOUNT | |
| 4. | 8T-4205 | [18] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 5. | 5C-9553 M | [18] | BOLT (M6X1X16-MM) | |
| 6. | 377-9823 | [1] | BOX-TERMINAL | |
| 7. | 6V-0884 | [6] | SCREW-MACHINE (1/4-20X0.375-IN) | |
| 8. | 261-3551 | [1] | PLATE-TERMINAL | |
| 9. | 312-0080 | [1] | REGULATOR AS-VOLTAGE | |
| 9A. | 292-7749 | [1] | FUSE (8-AMPERE) | |
| 11. | 261-3546 | [1] | RING | |
| 12. | [1] | EXCITER | ||
| 13. | 261-3548 | [4] | BOLT | |
| 14. | 261-3559 | [1] | SEAL-O-RING | |
| 15. | 261-3545 | [1] | BEARING | |
| 16. | [1] | ARMATURE | ||
| 17. | 261-3557 | [1] | DIODE AS | |
| 18. | 261-3558 | [1] | VARISTOR | |
| 19. | 261-3541 | [4] | TIE ROD | |
| M | METRIC PART | |||
#KEBP03110134
397-8170: GENERATOR GP-HYDRAULIC
397-8170 GENERATOR GP-HYDRAULIC
S/N MAT1-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
S/N MAT1-UP
PART OF 270-5315 GENERATOR GP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 472-6198 | [1] | MOUNT |
#KEBP03110135
277-4410: GLOW PLUG GP
277-4410 GLOW PLUG GP
S/N C6E1-UP
PART OF 242-1319, 384-6682 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N C6E1-UP
PART OF 242-1319, 384-6682 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03110136
418-4236: HARNESS AS-CHASSIS
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7R-7029 | [1] | CONNECTOR-RECEPTACLE (6-PIN) | ||
| 9X-3401 | [63] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [63] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [3] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [15] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [48] | PLUG-SEAL | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [3] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 194-5226 | [81] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [81] | WIRE AS (14-GA) | ||
| 7N-7978 | [2] | TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW) | ||
| 5P-2321 | [3] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(26-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#KEBP03110137
375-6581: HARNESS AS-CONTROL
375-6581 HARNESS AS-CONTROL
S/N MAT210-UP
PART OF 419-0788 PANEL GP-CIRCUIT BREAKER
S/N MAT210-UP
PART OF 419-0788 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 7T-6365 | [2] | HOUSING-RECEPTACLE | ||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1546 | [1] | PIN-CONNECTOR (6-GA) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [14] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 183-5784 | [3] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [136] | PLUG-SEAL | ||
| 102-8802 | [7] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 160-2244 G | SLEEVE-ABRASION (14.2-IN) | |||
| 160-2246 G | SLEEVE-ABRASION (39.8-IN) | |||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [200] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [200] | WIRE AS (14-GA) | ||
| 7K-1181 | [4] | STRAP-CABLE (5.72-MM DIA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 131-1489 | [2] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| (EACH INCLUDES) | ||||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1492 | [3] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| (EACH INCLUDES) | ||||
| 3K-4528 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 2L-8065 | [11] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8075 | [7] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 7T-6364 | [8] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03110138
416-2493: HARNESS AS-CONTROL
416-2493 HARNESS AS-CONTROL
S/N MAT210-UP
PART OF 422-0920 PANEL GP-CIRCUIT BREAKER
S/N MAT210-UP
PART OF 422-0920 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 7T-6365 | [2] | HOUSING-RECEPTACLE | ||
| 8N-1544 | [1] | PIN-CONNECTOR (8-GA) | ||
| 8N-1546 | [1] | PIN-CONNECTOR (6-GA) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [15] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 183-5784 | [3] | PLUG AS-CONNECTOR (40-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 8T-8737 | [143] | PLUG-SEAL | ||
| 102-8802 | [7] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 127-5486 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 160-2244 G | SLEEVE-ABRASION (14.2-IN) | |||
| 160-2246 G | SLEEVE-ABRASION (39.8-IN) | |||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [207] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [207] | WIRE AS (14-GA) | ||
| 7K-1181 | [4] | STRAP-CABLE (5.72-MM DIA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2L-8051 | [2] | TERMINAL-RING (6-GA, 5/16-IN SCREW) | ||
| -OR- | ||||
| 5P-3455 | [2] | TERMINAL-RING (8-GA, 5/16-IN SCREW) | ||
| 2L-8054 | [3] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| -OR- | ||||
| 2L-8061 | [3] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 2L-8065 | [11] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8075 | [7] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 7T-6364 | [7] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(80-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03110139
417-0633: HARNESS AS-CONTROL
417-0633 HARNESS AS-CONTROL -PL421
S/N MAT1-UP
PART OF 416-2254 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
S/N MAT1-UP
PART OF 416-2254 INSTALLATION GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 392-4904 | [1] | HARNESS AS-CONTROL (PRODUCT LINK) | ||
| 317-1204 E | SLEEVE (300-CM) | |||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [13] | PLUG-SEAL | ||
| E | ORDER BY THE CENTIMETER | |||
