AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

261-7148 PEDAL GP-GOVERNOR -ELECTRONIC S/N MAT1-UP PART OF 276-0079 CONTROL GP-DECELERATOR AN ATTACHMENT AP-655D


FUEL SYSTEM
CONTROL GP-GOVERNOR
OPERATOR STATION
PLATFORM GP

ASPHALT PAVER AP-655D ASPHALT PAVER MAT
 AP655D Steel Track Asphalt Paver MAT00001-UP (MACHINE) POWERED BY C6.6 Engine KEBP0311 AP-655D MAT   (2007)

FUEL SYSTEM

CONTROL GP-GOVERNOR
PEDAL GP-GOVERNOR
261-7148 PEDAL GP-GOVERNOR
PEDAL GP-GOVERNOR
310-1564 PEDAL GP-GOVERNOR
 

#KEBP03110350
 

261-7148: PEDAL GP-GOVERNOR

261-7148 PEDAL GP-GOVERNOR -ELECTRONIC
S/N MAT1-UP
PART OF 276-0079 CONTROL GP-DECELERATOR
AN ATTACHMENT
i02651609 KEBP0311
2617148 PEDAL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3C-4922 CM [1] BOLT (M8X1.25X60-MM)  
2. 160-2443 Y [1] SENSOR GP-POSITION (ROTARY)(DECELERATOR)  
3. 179-4324 CM [2] LOCKNUT (M5X0.8-THD)  
4. 243-0063 [1] BOOT  
5. 096-3772 CM [2] SCREW-MACHINE (M4X0.7X16-MM)  
6. 131-3540 CM [2] LOCKNUT (M8X1.25-THD)  
7. 3C-3364 CM [1] NUT-HALF (M8X1.25-THD)  
8. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
9. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
10. 8T-6902 [2] CLIP  
11. 8T-6912 CM [2] BOLT (M8X1.25X50-MM)  
12. 243-0062 [1] KIT-REPAIR (GOVERNOR PEDAL)  
    (INCLUDES SHAFT, CLIPS & BEARINGS)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110351
 

310-1564: PEDAL GP-GOVERNOR

310-1564 PEDAL GP-GOVERNOR -ELECTRONIC
S/N MAT1-UP
PART OF 276-0079 CONTROL GP-DECELERATOR
AN ATTACHMENT
i03206629 KEBP0311
3101564 PEDAL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3C-4922 M [1] BOLT (M8X1.25X60-MM)  
2. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
3. 243-0063 [1] BOOT  
4. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)(THROTTLE)  
5. 096-3772 M [2] SCREW-MACHINE (M4X0.7X16-MM)  
6. 131-3540 M [2] LOCKNUT (M8X1.25-THD)  
7. 3C-3364 M [1] NUT-HALF (M8X1.25-THD)  
8. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
9. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
10. 8T-6902 [2] CLIP  
11. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
12. 243-0062 [1] KIT-REPAIR (GOVERNOR PEDAL)  
    (INCLUDES SHAFT, CLIPS & BEARINGS)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110352
 

268-1854: PLATFORM GP-OPERATOR

268-1854 PLATFORM GP-OPERATOR -RH
S/N MAT1-203
PART OF 262-4107 OPERATOR AR
i02640729 KEBP0311
2681854 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-2253 [1] PIN  
2. 1U-5004 [1] SPRING  
3. 2T-3360 [1] BUTTON AS-HORN  
4. 7X-7943 [1] KNOB-CLAMP  
5. 133-7864 [2] BUSHING  
6. 145-9291 [1] STEERING WHEEL AS  
7. 153-7368 [1] PLUG  
8. 196-6791 [2] BEARING-FLANGE  
9. 196-6792 [1] PLATE-COVER  
10. 196-6793 B [5] SHIM (1-MM THK)  
11. 196-6794 [1] PLATE-SPACER  
12. 196-6798 [1] PAD  
13. 213-8130 [1] COVER  
14. 213-9028 [1] COVER  
15. 217-8058 [1] WIRE AS  
16. 261-7691 Y [1] STEERING COLUMN GP  
17. 268-1856 [1] PLATFORM AS (RH)  
18. 268-5806 [1] PLATE  
19. 268-5807 [1] HANDRAIL AS (RH)  
20. 271-1760 [1] PLATE AS  
21. 276-8111 [1] HANDRAIL AS (RH)  
22. 276-8113 [1] HOUSING AS  
23. 276-8114 [1] PLATE AS  
24. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
25. 1H-1200 [1] PIN-SPRING  
26. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
27. 7X-7729 [10] WASHER (11X25X3-MM THK)  
28. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
29. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
30. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
32. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
33. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
34. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
35. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
36. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
37. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
38. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110353
 

268-1854: PLATFORM GP-OPERATOR

268-1854 PLATFORM GP-OPERATOR -RH
S/N MAT204-UP
PART OF 262-4107 OPERATOR AR
i02911248 KEBP0311
2681854 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-2253 [1] PIN  
2. 1U-5004 [1] SPRING  
3. 322-8568 [1] BUTTON AS-HORN  
4. 7X-7943 [1] KNOB-CLAMP  
5. 133-7864 [2] BUSHING  
6. 145-9291 [1] STEERING WHEEL AS  
7. 153-7368 [1] PLUG  
8. 196-6791 [2] BEARING-FLANGE  
9. 196-6792 [1] PLATE-COVER  
10. 196-6793 B [5] SHIM (1-MM THK)  
11. 196-6794 [1] PLATE-SPACER  
12. 196-6798 [1] PAD  
13. 213-8130 [1] COVER (COLUMN)  
14. 213-9028 [1] COVER  
15. 217-8058 [1] WIRE AS  
16. 261-7691 Y [1] STEERING COLUMN GP  
17. 268-1856 [1] PLATFORM AS (RH)  
18. 268-5806 [1] PLATE  
19. 322-3267 C [1] HANDRAIL AS (RH)  
20. 271-1760 [1] PLATE AS  
21. 276-8111 [1] HANDRAIL AS (RH)  
22. 276-8113 [1] HOUSING AS (RH)  
23. 276-8114 [1] PLATE AS  
24. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
25. 1H-1200 [1] PIN-SPRING  
26. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
27. 7X-7729 [12] WASHER (11X25X3-MM THK)  
28. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
29. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
30. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
32. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
33. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
34. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
35. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
36. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
37. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
38. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110354
 

268-1855: PLATFORM GP-OPERATOR

268-1855 PLATFORM GP-OPERATOR -LH
S/N MAT1-203
PART OF 262-4107 OPERATOR AR
i02640730 KEBP0311
2681855 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-2253 [1] PIN  
2. 1U-5004 [1] SPRING  
3. 2T-3360 [1] BUTTON AS-HORN  
4. 7X-7943 [1] KNOB-CLAMP  
5. 133-7864 [2] BUSHING  
6. 145-9291 [1] STEERING WHEEL AS  
7. 153-7368 [1] PLUG  
8. 196-6791 [2] BEARING-FLANGE  
9. 196-6792 [1] PLATE-COVER  
10. 196-6793 B [5] SHIM (1-MM THK)  
11. 196-6794 [1] PLATE-SPACER  
12. 196-6798 [1] PAD  
13. 213-8130 [1] COVER  
14. 213-9028 [1] COVER  
15. 217-8058 [1] WIRE AS  
16. 261-7691 Y [1] STEERING COLUMN GP  
17. 268-1857 [1] PLATFORM AS  
18. 268-5806 [1] PLATE  
19. 268-5808 [1] HANDRAIL AS (LH)  
20. 271-1760 [1] PLATE AS  
21. 276-8112 [1] HANDRAIL AS (LH)  
22. 276-8114 [1] PLATE AS  
23. 276-9595 [1] HOUSING AS (LH)  
24. 277-0734 [1] COVER  
25. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
26. 1H-1200 [1] PIN-SPRING  
27. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
28. 7X-7729 [10] WASHER (11X25X3-MM THK)  
29. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
30. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
34. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
35. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
36. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
37. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
38. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
39. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
40. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110355
 

268-1855: PLATFORM GP-OPERATOR

268-1855 PLATFORM GP-OPERATOR -LH
S/N MAT204-UP
PART OF 262-4107 OPERATOR AR
Type 1
i02932504 KEBP0311
2681855 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-2253 [1] PIN  
2. 1U-5004 [1] SPRING  
3. 2T-3360 [1] BUTTON AS-HORN  
4. 7X-7943 [1] KNOB-CLAMP  
5. 133-7864 [2] BUSHING  
6. 145-9291 [1] STEERING WHEEL AS  
7. 153-7368 [1] PLUG  
8. 196-6791 [2] BEARING-FLANGE  
9. 196-6792 [1] PLATE-COVER  
10. 196-6793 B [5] SHIM (1-MM THK)  
11. 196-6794 [1] PLATE-SPACER  
12. 196-6798 [1] PAD  
13. 213-8130 [1] COVER  
14. 213-9028 [1] COVER  
15. 217-8058 [1] WIRE AS  
16. 261-7691 Y [1] STEERING COLUMN GP  
17. 268-1857 [1] PLATFORM AS  
18. 268-5806 [1] PLATE  
19. 322-3268 C [1] HANDRAIL AS (LH)  
20. 271-1760 [1] PLATE AS  
21. 276-8112 [1] HANDRAIL AS (LH)  
22. 276-8114 [1] PLATE AS  
23. 276-9595 [1] HOUSING AS (LH)  
24. 277-0734 [1] COVER  
25. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
26. 1H-1200 [1] PIN-SPRING  
27. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
28. 7X-7729 [10] WASHER (11X25X3-MM THK)  
29. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
30. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
34. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
35. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
36. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
37. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
38. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
39. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
40. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110356
 

268-1855: PLATFORM GP-OPERATOR

268-1855 PLATFORM GP-OPERATOR -LH
S/N MAT204-UP
PART OF 262-4107 OPERATOR AR
Type 2
i03009948 KEBP0311
2681855 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 301-2253 [1] PIN  
2. 1U-5004 [1] SPRING  
3. 322-8568 [1] BUTTON AS-HORN  
4. 7X-7943 [1] KNOB-CLAMP  
5. 133-7864 [2] BUSHING  
6. 145-9291 [1] STEERING WHEEL AS  
7. 153-7368 [1] PLUG  
8. 196-6791 [2] BEARING-FLANGE  
9. 196-6792 [1] PLATE-COVER  
10. 196-6793 B [5] SHIM (1-MM THK)  
11. 196-6794 [1] PLATE-SPACER  
12. 196-6798 [1] PAD  
13. 213-8130 [1] COVER  
14. 213-9028 [1] COVER  
15. 217-8058 [1] WIRE AS  
16. 261-7691 Y [1] STEERING COLUMN GP  
17. 268-1857 [1] PLATFORM AS  
18. 268-5806 [1] PLATE  
19. 322-3268 [1] HANDRAIL AS (LH)  
20. 271-1760 [1] PLATE AS  
21. 276-8112 [1] HANDRAIL AS (LH)  
22. 276-8114 [1] PLATE AS  
23. 276-9595 [1] HOUSING AS (LH)  
24. 277-0734 [1] COVER  
25. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
26. 1H-1200 [1] PIN-SPRING  
27. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
28. 7X-7729 [12] WASHER (11X25X3-MM THK)  
29. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
30. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
33. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
34. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
35. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
36. 8T-8894 M [4] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
37. 8T-4138 CM [2] BOLT (M6X1X20-MM)  
38. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
39. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
40. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
41. 8T-4205 C [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03110357
 

272-1764: PLATFORM GP-OPERATOR

272-1764 PLATFORM GP-OPERATOR
S/N MAT1-UP
PART OF 262-4108 STRUCTURAL AR
i02640840 KEBP0311
2721764 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 039-8869 [4] TUBE  
2. 258-6607 [4] SPACER (8.4X14X17-MM THK)  
3. 272-1765 [1] PLATFORM AS (RH)  
4. 272-1766 [1] PLATFORM AS (LH)  
5. 315-2620 [1] HANDRAIL AS (RH)(RH)  
6. 277-8909 [1] HANDRAIL AS (LH)  
7. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
8. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
9. 8T-4222 [8] WASHER-PLATED (11X32X2.5-MM THK)  
10. 8T-6870 M [4] BOLT (M8X1.25X70-MM)  
11. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
  M   METRIC PART
 

#KEBP03110358
 

332-8950: PLATFORM GP-OPERATOR

332-8950 PLATFORM GP-OPERATOR -RH
S/N MAT1-UP
PART OF 262-4107 OPERATOR AR
i03803073 KEBP0311
3328950 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-5004 [1] SPRING  
2. 7X-7943 [1] KNOB-CLAMP  
3. 133-7864 [2] BUSHING  
4. 196-6791 [2] BEARING-FLANGE  
5. 196-6792 [1] PLATE-COVER  
6. 196-6793 B [14] SHIM (1-MM THK)  
7. 196-6794 [2] PLATE-SPACER  
8. 196-6798 [1] PAD  
9. 213-8130 [1] COVER  
10. 213-9028 [1] COVER  
11. 268-5806 [1] PLATE  
12. 271-1760 [1] PLATE AS  
13. 360-3529 [1] HANDRAIL AS (RH)  
14. 276-8113 [1] HOUSING AS  
15. 276-8114 [1] PLATE AS  
16. 301-2253 [1] PIN  
17. 322-3267 [1] HANDRAIL AS (RH)  
18. 332-8952 [1] PLATFORM AS  
  7T-1099 [6] LINK  
  130-5300 [4] CLIP  
  159-9541 M [10] NUT-WELD (M10X1.5-THD)  
  178-8505 [1] PLATE AS  
19. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
20. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
21. 1H-1200 [1] PIN-SPRING  
22. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
23. 7X-7729 [12] WASHER (11X25X3-MM THK)  
24. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
25. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
26. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
27. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
28. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
29. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
30. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP03110359
 

332-8951: PLATFORM GP-OPERATOR

332-8951 PLATFORM GP-OPERATOR -LH
S/N MAT1-UP
PART OF 262-4107 OPERATOR AR
i03803074 KEBP0311
3328951 PLATFORM GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your AP-655D ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-5004 [1] SPRING  
2. 7X-7943 [1] KNOB-CLAMP  
3. 133-7864 [2] BUSHING  
4. 196-6791 [2] BEARING-FLANGE  
5. 196-6792 [1] PLATE-COVER  
6. 196-6793 B [14] SHIM (1-MM THK)  
7. 196-6794 B [2] PLATE-SPACER  
8. 196-6798 [1] PAD  
9. 213-8130 [1] COVER  
10. 213-9028 [1] COVER  
11. 268-5806 [1] PLATE  
12. 271-1760 [1] PLATE AS  
13. 276-8112 [1] HANDRAIL AS (LH)  
14. 276-8114 [1] PLATE AS  
15. 276-9595 [1] HOUSING AS  
16. 277-0734 [1] COVER  
17. 301-2253 [1] PIN  
18. 322-3268 [1] HANDRAIL AS (LH)  
19. 332-8953 [1] PLATFORM AS  
20. 127-2170 M [4] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
21. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
22. 1H-1200 [1] PIN-SPRING  
23. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 7X-7729 [12] WASHER (11X25X3-MM THK)  
25. 7Y-9099 M [6] SCREW-TRUSS HEAD (M8X1.25X25-MM)  
26. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
27. 8T-4136 M [10] BOLT (M10X1.5X25-MM)  
28. 8T-4138 M [2] BOLT (M6X1X20-MM)  
29. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
30. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
31. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
33. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog AP-655D :

PANEL GP-CONTROL
384-4708 PANEL GP-CONTROL
PANEL GP-CONTROL
384-4706 PANEL GP-CONTROL
PANEL GP-CONTROL
384-4706 PANEL GP-CONTROL
PANEL GP-CONTROL
326-6141 PANEL GP-CONTROL
PANEL GP-CONTROL
326-6139 PANEL GP-CONTROL
PANEL GP-CONTROL
295-2831 PANEL GP-CONTROL
PANEL GP-CONTROL
295-2829 PANEL GP-CONTROL
262-4107 OPERATOR AR
PEDAL GP-GOVERNOR
310-1564 PEDAL GP-GOVERNOR
PLATFORM GP-OPERATOR
268-1854 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
268-1854 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
268-1855 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
268-1855 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
268-1855 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
272-1764 PLATFORM GP-OPERATOR
PLATFORM GP-OPERATOR
332-8950 PLATFORM GP-OPERATOR

Truck sale:

Caterpillar AP-655D
 
Caterpillar AP-655D
- Asphalt Pavers
BERGERAT MONNOYEUR ROMANIA
Caterpillar AP655D
 
Caterpillar AP655D
- Asphalt Pavers
MACALLISTER MACHINERY CO., INC
Caterpillar AP655D
 
Caterpillar AP655D
- Asphalt Pavers
CAROLINA CAT
Caterpillar AP655D, Asphalt Pavers, Construction
74,000 
Caterpillar AP655D, Asphalt Pavers, Construction

CAROLINA CAT
Caterpillar AP-655D, Asphalt Pavers, Construction
169,000 
Caterpillar AP-655D, Asphalt Pavers, Construction

CAROLINA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.