ELECTRICAL AND STARTING SYSTEM
HARNESS GPCONTROL GP-ELECTRONIC
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#KEBP03120180
418-2323: HARNESS AS-SCREED
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6Y-6814 | [1] | CONNECTOR | ||
| 6Y-6812 | [1] | ELBOW-CONNECTOR | ||
| 113-8961 | [2] | END-WIRE (10-GA) | ||
| 329-3734 BE | TAPE-ELECTRICAL | |||
| 2L-8066 | [3] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#KEBP03120181
418-2324: HARNESS AS-SCREED
418-2324 HARNESS AS-SCREED
S/N GNZ1-UP
S/N GNZ1-UP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 107-1351 | [1] | CONNECTOR-FLEXIBLE | ||
| 3N-9697 | [1] | FERRULE | ||
| 177-9656 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 177-9653 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 160-2246 G | SLEEVE-ABRASION (1-IN) | |||
| 7T-0094 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| B | USE AS REQUIRED | |||
| G | ORDER BY THE INCH | |||
#KEBP03120182
433-6924: HARNESS AS-SCREED
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [16] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-7144 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [18] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [136] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-7143 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 160-2246 G | SLEEVE-ABRASION (30-IN) | |||
| 9X-1813 E | SLEEVE (194-CM) | |||
| 126-1768 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [196] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [196] | WIRE AS (14-GA) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 9G-4344 | [1] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 135-5010 E | TUBE-HEAT SHRINK (52-MM DIA)(20-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(72-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(50-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#KEBP03120183
433-6925: HARNESS AS-SCREED
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [17] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [17] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-7144 | [2] | PLUG AS-CONNECTOR (24-PIN) | ||
| (EACH INCLUDES) | ||||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [12] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [141] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-7143 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 9X-1813 E | SLEEVE (109-CM) | |||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [185] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [185] | WIRE AS (14-GA) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(70-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03120184
391-9966: HARNESS AS-WIRING
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [60] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 194-5226 | [11] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [11] | WIRE AS (14-GA) | ||
| 7K-1181 | [2] | STRAP-CABLE | ||
#KEBP03120185
464-6449: HARNESS AS-WIRING
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 194-5226 | [8] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [8] | WIRE AS (14-GA) | ||
| 189-3158 | [3] | SUPPRESSOR-ARC | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#KEBP03120186
311-6865: INSTALLATION GP-COMMUNICATION
311-6865 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N GNZ1-UP
AN ATTACHMENT
S/N GNZ1-UP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 2. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 5. | 262-1421 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 6. | 336-3545 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 7. | 310-2391 | [1] | ANTENNA AS | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 8. | 311-6866 | [1] | HARNESS AS-CONTROL | |
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [58] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [16] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 9. | 315-1328 | [1] | BRACKET AS | |
| 10. | 3S-2093 B | [4] | STRAP-CABLE | |
| 11. | 7K-1181 B | [5] | STRAP-CABLE | |
| 12. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 13. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120187
374-0583: INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [24] | STRAP-CABLE | |
| 2. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 3. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 5. | 262-1421 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 6. | 310-2393 | [1] | ANTENNA AS (450-CM) | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 355-0598 | [1] | NUT-SPECIAL | ||
| 7. | 311-6866 | [1] | HARNESS AS-CONTROL | |
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [58] | PLUG-SEAL | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [9] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 8. | 336-3545 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 9. | 336-9196 | [1] | PLATE | |
| 10. | 368-0287 | [1] | WIRE AS-GROUND | |
| 11. | 132-5789 | [1] | CLIP (LADDER) | |
| 12. | 7K-1181 | [7] | STRAP-CABLE | |
| 13. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 14. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 16. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 17. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 18. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120188
389-9070: INSTALLATION GP-COMMUNICATION
389-9070 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N GNZ1-UP
AN ATTACHMENT
S/N GNZ1-UP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 3. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 136-4192 M | [4] | BOLT (M6X1X35-MM) | |
| 5. | 346-9376 | [1] | ANTENNA AS (PRODUCT LINK) | |
| 355-1213 | [1] | PLUG | ||
| 361-1045 | [1] | NUT-SPECIAL (5/8-18-THD) | ||
| 6. | 347-2216 | [1] | CABLE AS-COMMUNICATION | |
| 7. | 351-8490 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK 522) | |
| 8. | 391-9966 Y | [1] | HARNESS AS-WIRING | |
| 9. | 418-9079 | [1] | BRACKET AS | |
| 7T-1099 | [2] | LINK | ||
| 10. | 7K-1181 | [3] | STRAP-CABLE | |
| 11. | 8C-8585 M | [2] | SCREW-BUTTON HEAD (M10X1.5X20-MM) | |
| 12. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 13. | 435-3057 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 522) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120189
416-2254: INSTALLATION GP-COMMUNICATION
416-2254 INSTALLATION GP-COMMUNICATION -PRODUCT LINK
S/N GNZ1-UP
AN ATTACHMENT
S/N GNZ1-UP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 386-3004 | [1] | CONTROL GP-COMMUNICATION (PL421) | |
| 390-2764 | [1] | BRACKET | ||
| 2. | 389-0463 | [1] | ANTENNA AS | |
| 3. | 415-8299 | [1] | COVER | |
| 4. | 417-0633 Y | [1] | HARNESS AS-CONTROL (PL421) | |
| 5. | 1H-3244 | [2] | LOCKWASHER | |
| 6. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 7. | 5P-6264 | [1] | GROMMET | |
| 8. | 7K-1181 | [7] | STRAP-CABLE | |
| 9. | 7M-3361 | [1] | GROMMET | |
| 10. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
