ELECTRICAL AND STARTING SYSTEM
WIRING GPCIRCUIT BREAKER GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#KEBP03120250
269-8367: WIRING GP-MACHINE
269-8367 WIRING GP-MACHINE -LH
S/N GNZ491-UP
S/N GNZ491-UP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 418-4236 CY | [1] | HARNESS AS-CHASSIS (LH) | |
| 2. | 112-3101 | [2] | PLATE-FACE | |
| 3. | 7K-1181 C | [31] | STRAP-CABLE | |
| 4. | 8D-9537 | [1] | CAP-DUST | |
| 5. | 3S-2093 | [26] | STRAP-CABLE | |
| 6. | 283-8045 | [1] | PLATE AS | |
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 130-5300 C | [9] | CLIP | |
| 10. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 11. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 12. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 14. | 8N-0694 Y | [1] | SWITCH AS-TOGGLE (SINGLE POLE)(GROUND LEVEL SHUTDOWN) | |
| 15. | 9G-0011 | [1] | SWITCH AS-TOGGLE (TOW POINT CONTROL) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 16. | 5D-7635 | [1] | GROMMET | |
| 17. | 9M-8406 | [1] | CLIP (LOOP) | |
| 18. | 156-6175 B | [1] | CLIP (LADDER) | |
| 19. | 2N-3480 | [6] | SCREW-MACHINE (10-24X0.75-IN) | |
| 20. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| 21. | 4B-2047 | [6] | NUT (10-24-THD) | |
| 22. | 6V-9672 M | [4] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 23. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 24. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 25. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 27. | 0L-1407 | [1] | GROMMET | |
| 28. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 29. | 9B-1117 | [4] | LOCKWASHER | |
| 30. | 3C-6969 M | [4] | NUT (M3X0.5-THD) | |
| 31. | 116-0118 | [1] | CLIP | |
| 32. | 8T-4224 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 8T-6912 CM | [1] | BOLT (M8X1.25X50-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120251
269-8368: WIRING GP-MACHINE
269-8368 WIRING GP-MACHINE -RH
S/N GNZ1-UP
S/N GNZ1-UP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 271-6403 | [1] | HARNESS AS-CHASSIS (RH) | |
| 180-9340 | [55] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [13] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | KIT-CONNECTING PLUG (4-PIN) | |||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 7R-7029 | [1] | CONNECTOR-RECEPTACLE (6-PIN) | ||
| 8T-8737 | [23] | PLUG-SEAL | ||
| 125-7875 | [10] | TUBE-HEAT SHRINK (7.44-MM DIA) | ||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 7N-7978 | [2] | TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW) | ||
| 131-1492 | [2] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 180-9339 | [34] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 2. | 112-3101 | [1] | PLATE-FACE | |
| 3. | 7K-1181 | [18] | STRAP-CABLE | |
| 4. | 3S-2093 | [30] | STRAP-CABLE | |
| 5. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 6. | 130-5300 | [7] | CLIP | |
| 7. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 8. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 9. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 10. | 9G-0011 | [1] | SWITCH AS-TOGGLE (TOW POINT CONTROL, RH) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 11. | 220-0230 | [1] | ALARM AS (BACKUP)(BACKUP) | |
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M EACH) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (31-CM) | |||
| 12. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 BM | [1] | BOLT (M10X1.5X20-MM) | |
| 14. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 15. | 5D-7635 | [1] | GROMMET | |
| 16. | 156-6175 B | [1] | CLIP (LADDER) | |
| 17. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 19. | 4B-4274 | [3] | WASHER (5.5X13X1.2-MM THK) | |
| 20. | 2N-3480 | [3] | SCREW-MACHINE (10-24X0.75-IN) | |
| 21. | 4B-2047 | [3] | NUT (10-24-THD) | |
| 22. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 23. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 24. | 6V-9672 M | [4] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 25. | 8D-9537 | [1] | CAP-DUST | |
| 26. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 27. | 9B-1117 | [4] | LOCKWASHER | |
| 28. | 3C-6969 M | [4] | NUT (M3X0.5-THD) | |
| 29. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 30. | 116-0118 | [1] | CLIP | |
| 31. | 8T-4186 BM | [1] | BOLT (M10X1.5X40-MM) | |
| 32. | 9R-5383 B | [1] | BOSS | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03120252
269-8369: WIRING GP-MACHINE
269-8369 WIRING GP-MACHINE -REAR
S/N GNZ1-UP
S/N GNZ1-UP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 235-3518 | [1] | PLATE | |
| 2. | 272-5741 | [1] | HARNESS AS-REAR CHASSIS | |
| 8T-8737 | [28] | PLUG-SEAL | ||
| 9X-7143 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 180-9339 | [40] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 3. | 096-6166 | [7] | WASHER-HARD (4.5X9X1-MM THK) | |
| 4. | 8T-8737 | [3] | PLUG-SEAL | |
| 5. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | |
| 6. | 5C-8312 M | [7] | NUT (M4X0.7-THD) | |
| 7. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 8. | 6V-9672 M | [7] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 9. | 7K-1181 | [8] | STRAP-CABLE | |
| 10. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| 12. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03120253
269-8371: WIRING GP-MACHINE
269-8371 WIRING GP-MACHINE
S/N GNZ1-489
S/N GNZ1-489
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-0633 | [1] | HARNESS AS-ENGINE | |
| 180-9339 | [11] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 267-9572 | [19] | SOCKET-CONNECTION (18-GA) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 245-1042 | [1] | PLUG AS-CONNECTOR (64-PIN) | ||
| 245-1044 | [2] | LOCK-CONNECTOR | ||
| 245-1045 | [1] | COVER | ||
| 245-1048 | [45] | PLUG-CONNECTOR (1-PIN) | ||
| 131-1488 | [2] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2. | 277-0634 | [1] | HARNESS AS-PUMP | |
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 180-9339 | [29] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [14] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9340 | [28] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 3. | 277-8236 | [1] | HARNESS AS-SOLENOID | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 4. | 7K-1181 | [15] | STRAP-CABLE | |
| 5. | 1S-1015 | [1] | CLIP | |
| 6. | 130-5301 | [5] | CLIP | |
| 7. | 4P-7429 | [2] | CLIP (LADDER) | |
| 8. | 096-6166 | [3] | WASHER-HARD (4.5X9X1-MM THK) | |
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 10. | 8T-8737 | [2] | PLUG-SEAL | |
| 11. | 4P-7428 | [3] | CLIP (LADDER) | |
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | |
| 14. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 15. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 16. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 17. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 18. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 24. | 8T-8799 | [1] | BOOT (RED)(RED) | |
| 25. | 6V-9672 M | [3] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 26. | 4P-8134 | [3] | CLIP (LADDER) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03120254
269-8371: WIRING GP-MACHINE
269-8371 WIRING GP-MACHINE
S/N GNZ490-UP
S/N GNZ490-UP
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-0633 Y | [1] | HARNESS AS-ENGINE | |
| 2. | 423-2501 CY | [1] | HARNESS AS-PUMP | |
| 3. | 277-8236 | [1] | HARNESS AS-SOLENOID | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 4. | 7K-1181 C | [17] | STRAP-CABLE | |
| 5. | 1S-1015 | [1] | CLIP | |
| 6. | 130-5301 C | [1] | CLIP | |
| 7. | 4P-7429 C | [4] | CLIP (LADDER) | |
| 8. | 096-6166 | [3] | WASHER-HARD (4.5X9X1-MM THK) | |
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 8T-8737 | [2] | PLUG-SEAL | |
| 11. | 4P-7428 | [3] | CLIP (LADDER) | |
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | |
| 14. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 15. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 16. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 17. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 18. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 24. | 8T-8799 | [1] | BOOT (RED)(RED) | |
| 25. | 6V-9672 M | [3] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 26. | 4P-8134 | [3] | CLIP (LADDER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120255
283-4417: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-4694 | [1] | PLUG-BUTTON | |
| 2. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | [1] | KEY | ||
| 3. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 4. | 197-1381 | [1] | CIRCUIT BREAKER AS (35-AMPERE) | |
| 5. | 241-7709 | [1] | PLATE | |
| 6. | 246-8370 | [1] | GROMMET | |
| 7. | 306-7612 Y | [1] | PANEL GP-POWER | |
| 8. | 306-7615 | [1] | CABLE AS | |
| 6Y-6812 | [1] | ELBOW-CONNECTOR | ||
| 6Y-6814 | [1] | CONNECTOR | ||
| 9X-2294 E | CONDUIT-FLEXIBLE (16.05-MM ID)(55-CM) | |||
| 2L-8066 | [1] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 9. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 10. | 7K-1181 | [4] | STRAP-CABLE | |
| 11. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 12. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 14. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120256
283-4417: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-4694 | [1] | PLUG-BUTTON | |
| 2. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | [1] | KEY | ||
| 3. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 4. | 448-2709 C | [1] | CIRCUIT BREAKER (30-AMPERE) | |
| 5. | 241-7709 | [1] | PLATE | |
| 6. | 246-8370 | [1] | GROMMET | |
| 7. | 306-7612 Y | [1] | PANEL GP-POWER | |
| 8. | 418-2323 CY | [1] | HARNESS AS-SCREED | |
| 9. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 10. | 3S-2093 C | [5] | STRAP-CABLE | |
| 11. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 12. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 14. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 15. | 8T-4896 C | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120257
302-3912: WIRING GP-POWER RECEPTACLE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 197-1381 | [1] | CIRCUIT BREAKER AS (35-AMPERE) | |
| 3. | 241-7709 | [1] | PLATE | |
| 4. | 246-8370 | [1] | GROMMET | |
| 5. | 306-7615 | [1] | CABLE AS | |
| 6. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 7. | 302-3911 | [1] | HARNESS AS-SWITCH | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 180-9339 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8. | 306-7612 Y | [1] | PANEL GP-POWER | |
| 9. | 4D-1836 | [1] | SWITCH-TOGGLE (HOLD FREQUENCY) | |
| 10. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 11. | 5P-8440 | [1] | GROMMET | |
| 12. | 7K-1181 | [4] | STRAP-CABLE | |
| 13. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 16. | 9G-4191 | [1] | GROMMET | |
| 17. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 18. | 246-2641 | [1] | PADLOCK GP | |
| 5P-8500 | [1] | KEY | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03120258
276-4552: WIRING GP-SCREED
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 276-4542 | [1] | FILM-IDENTIFICATION (SCREED EXTENSION) | |
| 2. | 276-4553 | [1] | HARNESS AS-SWITCH (SCREED) | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7N-7978 | [1] | TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW) | ||
| 5P-2321 | [8] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 3. | 276-4556 | [1] | PLATE | |
| 4. | 246-8912 | [1] | SWITCH GP-TOGGLE (EXTENDER CONTROL, RH) | |
| 4A. | 246-8912 | [1] | SWITCH GP-TOGGLE (FEEDER CONTROL) | |
| 4B. | 246-8912 | [1] | SWITCH GP-TOGGLE (TOW POINT CONTROL, RH) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 5. | 265-9984 | [1] | BRACKET | |
#KEBP03120259
276-4606: WIRING GP-SCREED
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-2480 M | [4] | BOLT (M6X1X45-MM) | |
| 2. | 1G-9959 | [2] | CLAMP | |
| 3. | 3S-2093 | [21] | STRAP-CABLE | |
| 4. | 9X-2045 M | [12] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 5. | 7V-5626 | [2] | CLAMP | |
| 6. | 7V-5628 | [3] | PLATE (TOP) | |
| 7. | 7V-6089 | [2] | CLAMP | |
| 8. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 9. | 8T-9658 | [4] | SPACER (8.2X12.7X25.4-MM THK) | |
| 10. | 8T-9364 | [8] | BOLT (1/4-20X0.625-IN) | |
| 11. | 143-2923 | [4] | PLATE | |
| 12. | 8T-5005 M | [4] | BOLT (M10X1.5X70-MM) | |
| 13. | 143-9644 | [2] | PLATE-RETAINER | |
| 14. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 15. | 169-5414 | [15] | CLIP | |
| 16. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 17. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 18. | 208-0075 | [4] | CLAMP-HALF | |
| 19. | 322-9152 Y | [4] | SENSOR GP-TEMPERATURE (SCREED HEAT) | |
| 20. | 236-5149 | [4] | WASHER-NYLON (11.17X19.05X1.6MM THK) | |
| 21. | 304-5687 | [1] | CONTROL GP-UNPROGRAMMED (SCREED) | |
| 22. | 257-4380 Y | [1] | HARNESS AS-SCREED (PAVER TO SCREED) | |
| 23. | 433-6925 CY | [1] | HARNESS AS-SCREED (MAIN) | |
| 24. | 270-9299 Y | [2] | HARNESS AS-SCREED (EXTENSION) | |
| 25. | 276-4552 Y | [2] | WIRING GP-SCREED (EXTENSION) | |
| 26. | 276-4615 | [2] | COVER | |
| 27. | 279-3556 | [2] | BOX AS | |
| 28. | 330-6732 | [1] | PLATE AS | |
| 7T-1099 | [1] | LINK | ||
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [2] | NUT-WELD (M4X0.7-THD) | ||
| 29. | 288-9753 | [1] | PLATE AS | |
| 30. | 289-3575 Y | [1] | BOX GP-SCREED CONTROL (RH) | |
| 31. | 289-3576 Y | [1] | BOX GP-SCREED CONTROL (LH) | |
| 32. | 351-5775 Y | [1] | ELECTRONICS GP-IMPLEMENT | |
| 33. | 096-6166 | [24] | WASHER-HARD (4.5X9X1-MM THK) | |
| 34. | 130-5300 | [10] | CLIP | |
| 35. | 132-5789 | [2] | CLIP (LADDER) | |
| 36. | 4D-7388 | [1] | CLIP (LOOP) | |
| 37. | 5C-8312 M | [12] | NUT (M4X0.7-THD) | |
| 38. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 39. | 5K-3294 | [1] | CLIP | |
| 40. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 41. | 5P-4116 C | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 42. | 5P-9297 | [2] | CLIP (LOOP) | |
| 43. | 6V-9491 M | [12] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 44. | 8T-4197 M | [4] | BOLT (M8X1.25X40-MM) | |
| 45. | 7K-1181 | [35] | STRAP-CABLE | |
| 46. | 7X-7729 | [12] | WASHER (11X25X3-MM THK) | |
| 47. | 8C-8451 M | [6] | BOLT (M6X1X40-MM) | |
| 48. | 8M-2773 | [11] | CLIP (LOOP) | |
| 49. | 8T-4121 | [17] | WASHER-HARD (11X21X2.5-MM THK) | |
| 50. | 8T-4133 M | [5] | NUT (M10X1.5-THD) | |
| 51. | 8T-4137 M | [13] | BOLT (M10X1.5X20-MM) | |
| 52. | 8T-4195 M | [11] | BOLT (M10X1.5X30-MM) | |
| 53. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
