AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

219-5849 CYLINDER HEAD GP S/N TX71-UP; C7C1-UP; KHX16002-UP PART OF 260-6629, 460-5902 ENGINE AR-CORE ALSO AN ATTACHMENT PM-102


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
PAN GP-OIL
DRIVE GP-ACCESSORY
DRIVE GP-WATER PUMP
CYLINDER HEAD GP
DAMPER GP

COLD PLANER PM-102 COLD PLANER Z2X
 C7 Caterpillar Engine For PM102 Cold Planer Z2X00001-UP (MACHINE) POWERED BY C7 Engine KEBP0322 PM-102 Z2X   (2006)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5849 CYLINDER HEAD GP
CYLINDER HEAD GP
300-9550 CYLINDER HEAD GP
CYLINDER HEAD GP
487-2807 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
258-8723 FASTENER GP-CYLINDER HEAD
 

#KEBP03220030
 

219-5849: CYLINDER HEAD GP

219-5849 CYLINDER HEAD GP
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 260-6629, 460-5902 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02485081 KEBP0322
2195849 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 219-5847 Y [1] CYLINDER HEAD GP  
2. 133-4995 [1] GASKET AS-CYLINDER HEAD  
3. 142-7289 [14] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  138-3252 [1] BOLT-12 POINT HEAD  
  8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
4. 8T-7950 M [6] BOLT (M10X1.5X180-MM)  
5. 6V-5839 [6] WASHER (11X21X2.5-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03220031
 

300-9550: CYLINDER HEAD GP

300-9550 CYLINDER HEAD GP
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 219-5847 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i02926888 KEBP0322
3009550 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER  
2. 2A-4429 [12] LOCK-RETAINER  
3. 137-6715 [6] SEAT-VALVE SPRING  
4. 137-6718 [6] SPRING-VALVE (EXHAUST)  
5. 140-6188 [12] SPRING-VALVE (INLET)  
6. 147-8214 [12] SEAL-VALVE STEM (INLET)  
7. 147-8220 [6] GUIDE-VALVE (STANDARD)  
  187-8278 AB GUIDE-VALVE (0.13-MM OS)  
  187-8279 AB GUIDE-VALVE (0.51-MM OS)  
8. 163-2478 [6] SEAL-VALVE STEM (EXHAUST)  
9. 252-7801 [12] VALVE-INLET  
10. Y [1] CYLINDER HEAD AS  
11. 134-4483 [6] RETAINER-SPRING  
12. 140-9670 [12] GUIDE-VALVE (STANDARD)  
  187-8280 AB GUIDE-VALVE (0.13-MM OS)  
  187-8281 AB GUIDE-VALVE (0.51-MM OS)  
13. 147-8211 [6] VALVE-EXHAUST  
14. 7E-7779 [12] RETAINER-SPRING  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#KEBP03220032
 

487-2807: CYLINDER HEAD GP

487-2807 CYLINDER HEAD GP
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 219-5847 CYLINDER HEAD GP
ALSO AN ATTACHMENT
i06510527 KEBP0322
4872807 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2715 [24] LOCK-RETAINER  
2. 2A-4429 [12] LOCK-RETAINER  
3. 7E-7779 [12] RETAINER-SPRING  
4. 134-4483 [6] RETAINER-SPRING  
5. 137-6715 [6] SEAT-VALVE SPRING  
6. 137-6718 [6] SPRING-VALVE  
7. 140-6188 [12] SPRING-VALVE  
8. 147-8214 [12] SEAL-VALVE STEM  
9. 147-8220 [6] GUIDE-VALVE  
10. 157-7130 [6] VALVE-EXHAUST  
11. 163-2478 [6] SEAL-VALVE STEM  
12. 252-7801 [12] VALVE-INLET  
13. 487-2810 Y [1] CYLINDER HEAD AS  
14. 140-9670 [12] GUIDE-VALVE  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03220033
 

132-1976: DAMPER & PULLEY GP

132-1976 DAMPER & PULLEY GP
S/N TX71-UP; C7C1-UP; KHX16002-UP
3-GROOVE
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH ALL ENGINE SPEEDS
ALSO AN ATTACHMENT
i02479143 KEBP0322
1321976 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8121 [1] DAMPER AS  
2. 107-7750 [1] PULLEY  
 

#KEBP03220034
 

198-6475: DRAIN GP-ENGINE OIL

198-6475 DRAIN GP-ENGINE OIL
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH FRONT SUMP, REAR SUMP AND LOW PROFILE OIL PANS
ALSO AN ATTACHMENT
i02479155 KEBP0322
1986475 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 386-6215 [2] PLUG AS (ENGINE OIL PAN DRAIN)  
    (EACH INCLUDES)
  118-3619 [1] PLUG-MAGNETIC  
  238-5080 [1] SEAL-O-RING  
 

#KEBP03220035
 

237-9231: DRIVE GP-ACCESSORY

237-9231 DRIVE GP-ACCESSORY
S/N C7C4071-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02730776 KEBP0322
2379231 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-7521 [1] ADAPTER  
2. 100-7524 [1] COUPLING  
3. 135-9819 [1] SEAL-INTEGRAL  
4. 291-5532 [1] TUBE AS  
5. 100-7517 [1] GEAR (50-TEETH)  
6. 100-7518 [1] BEARING  
8. 2M-1538 [2] STUD-TAPERLOCK (3/8-16X1.6-IN)  
10. 3J-7354 [1] SEAL-O-RING  
11. 4J-5477 [1] SEAL-O-RING  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6S-3002 [1] SEAL-O-RING  
16. 6V-5217 M [8] BOLT (M8X1.25X20-MM)  
17. 6V-8628 [1] ELBOW (90-DEG)  
18. 148-8316 [1] CONNECTOR AS  
18A. 6V-8647 [1] CONNECTOR  
18B. 3J-7354 [1] SEAL-O-RING  
18C. 4J-5477 [1] SEAL-O-RING  
19. 8T-0106 M [2] BOLT (M12X1.75X100-MM)  
20. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
21. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  M   METRIC PART
 

#KEBP03220036
 

237-9231: DRIVE GP-ACCESSORY

237-9231 DRIVE GP-ACCESSORY
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05742558 KEBP0322
2379231 DRIVE GP-ACCESSORY Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-7521 [1] ADAPTER  
2. 100-7524 [1] COUPLING  
3. 135-9819 [1] SEAL-INTEGRAL  
4. 291-5532 [1] TUBE AS  
5. 100-7517 [1] GEAR (50-TEETH)  
6. 100-7518 [1] BEARING  
8. 2M-1538 [2] STUD-TAPERLOCK (3/8-16X1.6-IN)  
12. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 6V-7350 C [1] SEAL-O-RING  
16. 6V-5217 M [8] BOLT (M8X1.25X20-MM)  
17. 341-0124 C [1] ELBOW AS  
  6V-8628 [1] ELBOW  
  214-7566 [1] SEAL-O-RING  
  228-7088 [1] SEAL-O-RING  
18. 439-1826 C [1] CONNECTOR AS  
18A. 6V-8647 [1] CONNECTOR  
18B. 214-7566 [1] SEAL-O-RING  
18C. 228-7088 [1] SEAL-O-RING  
19. 8T-0106 M [2] BOLT (M12X1.75X100-MM)  
20. 9M-1974 [8] WASHER-HARD (8.8X16X2-MM THK)  
21. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP03220037
 

120-6657: DRIVE GP-WATER PUMP

120-6657 DRIVE GP-WATER PUMP
S/N TX71-UP; C7C1-UP; KHX16002-UP
1.33:1 DRIVE RATIO
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02479204 KEBP0322
1206657 DRIVE GP-WATER PUMP Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 036-6775 [1] V-BELT (PUMP DRIVE)(WATER)  
2. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
3. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
4. 115-4204 [1] PULLEY AS-IDLER  
4A. 2L-8509 [1] RING-LOCK  
4B. 156-1871 [2] BALL BEARING  
4C. 100-6267 [1] PLATE AS-IDLER  
4D. 115-4237 [1] PULLEY-IDLER  
5. 3E-4352 [1] WASHER-HARD (8.8X20.5X2.5-MM THK)  
  M   METRIC PART
 

#KEBP03220038
 

258-8723: FASTENER GP-CYLINDER HEAD

258-8723 FASTENER GP-CYLINDER HEAD
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02479856 KEBP0322
2588723 FASTENER GP-CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 229-8844 [3] CLIP  
2. 244-4500 [11] SPRING  
3. 8T-0100 M [11] BOLT (M8X1.25X60-MM)  
4. 9N-0869 [11] WASHER-HARD (8.8X25.5X2-MM THK)  
  M   METRIC PART
 

#KEBP03220039
 

240-0434: FASTENER GP-DAMPER & PULLEY

240-0434 FASTENER GP-DAMPER & PULLEY
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02478149 KEBP0322
2400434 FASTENER GP-DAMPER & PULLEY Parts scheme
  For full view, you need register

Parts for your PM-102 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-3621 [1] SPACER (101.5X167X8-MM THK)  
2. 6V-5839 [8] WASHER (11X21X2.5-MM THK)  
3. 6V-7981 M [8] BOLT (M10X1.5X70-MM)  
  M   METRIC PART
 

Information:

Special Instruction
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Disassembly and Assembly
Inlet and Exhaust Valves - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Cylinder Head - Remove
C7
Engines for Caterpillar Built Machines
Cylinder Head - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Caterpillar Parts SIS Catalog PM-102 :

CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5847 CYLINDER HEAD GP
CYLINDER HEAD GP
219-5846 CYLINDER HEAD GP
CYLINDER HEAD AS
487-2810 CYLINDER HEAD AS
CYLINDER HEAD AS
314-4184 CYLINDER HEAD AS
CYLINDER HEAD AS
219-5845 CYLINDER HEAD AS
CYLINDER HEAD AS
219-5844 CYLINDER HEAD AS
CYLINDER HEAD GP
300-9550 CYLINDER HEAD GP
CYLINDER HEAD GP
487-2807 CYLINDER HEAD GP
DAMPER & PULLEY GP
132-1976 DAMPER & PULLEY GP
DRAIN GP-ENGINE OIL
198-6475 DRAIN GP-ENGINE OIL
DRIVE GP-ACCESSORY
237-9231 DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
237-9231 DRIVE GP-ACCESSORY
DRIVE GP-WATER PUMP
120-6657 DRIVE GP-WATER PUMP
FASTENER GP-CYLINDER HEAD
258-8723 FASTENER GP-CYLINDER HEAD

Truck sale:

Caterpillar PM-102, Construction
123,912 
Caterpillar PM-102, Construction
- Asphalt cold milling machines
MICHIGAN CAT
CATERPILLAR PM-102 2012
 
CATERPILLAR PM-102 2012
- COLD PLANERS
ZEPPELIN RUSSLAND
CATERPILLAR PM 102 2015
 
CATERPILLAR PM 102 2015
- ASPHALT PLANERS
KELLY TRACTOR
United States
CATERPILLAR PM - 102 2016
 
CATERPILLAR PM - 102 2016
- COLD PLANERS
ZEPPELIN POWER SYSTEMS
>
CATERPILLAR PM-102 2012
 
CATERPILLAR PM-102 2012
- COLD PLANERS
ZEPPELIN RUSSLAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.