BASIC ENGINE
ENGINE GPLIFTER GP
LIFTING GP-ENGINE
PAN GP-OIL
PISTON & ROD GP
CYLINDER BLOCK GP
BASIC ENGINE
ENGINE GP#KEBP03220050
465-9256: KIT-ENGINE GASKET
465-9256 KIT-ENGINE GASKET
S/N Z2X1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@237-9249@@@@@, @@@@@352-6166@@@@@
FIELD INSTALLATION
S/N Z2X1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@237-9249@@@@@, @@@@@352-6166@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7C-7431 | [1] | GASKET | ||
| 126-5466 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 222-5915 | [1] | GASKET | ||
| 272-1956 | [6] | GASKET | ||
| 133-4995 | [1] | GASKET AS-CYLINDER HEAD | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 304-4924 | [1] | SEAL AS | ||
| 6V-3250 | [3] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 3P-1156 | [1] | SEAL-O-RING | ||
| 6V-6609 | [3] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 214-7566 | [8] | SEAL-O-RING | ||
| 214-7567 | [2] | SEAL-O-RING | ||
| 214-7568 | [15] | SEAL-O-RING | ||
| 228-7089 | [4] | SEAL-O-RING | ||
| 228-7090 | [2] | SEAL-O-RING | ||
| 238-5079 | [2] | SEAL-O-RING | ||
| 238-5080 | [3] | SEAL-O-RING | ||
| 238-5084 | [2] | SEAL-O-RING | ||
| 7F-8268 | [1] | SEAL-O-RING | ||
| 272-0388 | [1] | SEAL-VALVE COVER | ||
| 418-6781 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#KEBP03220051
483-3706: KIT-ENGINE GASKET
483-3706 KIT-ENGINE GASKET
S/N Z2X1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@237-9249@@@@@, @@@@@352-6166@@@@@
FIELD INSTALLATION
S/N Z2X1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH @@@@@237-9249@@@@@, @@@@@352-6166@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-3445 | [1] | CAP-DUST | ||
| 4Y-9652 | [3] | GASKET | ||
| 7W-5340 | [1] | GASKET | ||
| 4F-9029 | [1] | SEAL | ||
| 166-2905 | [1] | SEAL-INTEGRAL | ||
| 3P-1156 | [2] | SEAL-O-RING | ||
| 4F-9653 | [1] | SEAL-O-RING | ||
| 6V-5063 | [2] | SEAL-O-RING | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 214-7568 | [2] | SEAL-O-RING | ||
| 228-7088 | [2] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 238-5082 | [2] | SEAL-O-RING | ||
| 295-5609 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#KEBP03220052
139-4081: LIFTER GP-VALVE
139-4081 LIFTER GP-VALVE -MECHANISM
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 232-3717 VALVE MECHANISM GP
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 232-3717 VALVE MECHANISM GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220053
142-8100: LIFTING GP-ENGINE
142-8100 LIFTING GP-ENGINE
S/N TX71-UP; C7C1-UP; KHX16002-UP
FRONT, REAR
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH @@@@@113-6170@@@@@, @@@@@117-3477@@@@@
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
FRONT, REAR
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH @@@@@113-6170@@@@@, @@@@@117-3477@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220054
126-5931: PAN GP-OIL
126-5931 PAN GP-OIL -ENGINE
S/N C7C1-UP
31-LITER. FRONT SUMP
PART OF 237-9249 ENGINE AR-COMPLETE
S/N C7C1-UP
31-LITER. FRONT SUMP
PART OF 237-9249 ENGINE AR-COMPLETE
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-5921 | [1] | PAN-OIL | |
| 2. | 9M-1974 | [36] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 6V-3918 M | [36] | BOLT (M8X1.25X50-MM) | |
| 4. | 166-2905 | [1] | SEAL-INTEGRAL | |
| 6. | 9S-8008 | [2] | PLUG (1-1/16-12-THD)(ENGINE OIL PAN DRAIN) | |
| 7. | 3D-2824 | [2] | SEAL-O-RING | |
| 8. | 9S-8004 | [1] | PLUG (9/16-18-THD)(9/16X18-2A THD) | |
| 9. | 3J-1907 | [1] | SEAL-O-RING | |
| 4C-9612 BF | SEALANT-SILICONE | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#KEBP03220055
126-5931: PAN GP-OIL
126-5931 PAN GP-OIL -ENGINE
S/N TX71-UP; C7C1-UP; KHX16002-UP
31-LITER. FRONT SUMP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
31-LITER. FRONT SUMP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 222-5921 | [1] | PAN-OIL (ENGINE) | |
| 2. | 9M-1974 | [36] | WASHER-HARD (8.8X16X2-MM THK) | |
| 3. | 6V-3918 M | [36] | BOLT (M8X1.25X50-MM) | |
| 4. | 166-2905 | [1] | SEAL-INTEGRAL | |
| 5. | 4C-9612 B | SEALANT-SILICONE | ||
| 6. | 389-3709 C | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6A. | 238-5082 | [1] | SEAL-O-RING (ENGINE OIL PAN DRAIN) | |
| 6B. | 360-3682 | [1] | PLUG-O-RING | |
| 7. | 389-3708 C | [1] | PLUG AS | |
| 7A. | 214-7568 | [1] | SEAL-O-RING (9/16X18-2A THD) | |
| 7B. | 360-3679 | [1] | PLUG-CONNECTOR (9/16-18-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#KEBP03220056
300-5531: PAN GP-OIL
300-5531 PAN GP-OIL -ENGINE
S/N TX71-UP
REAR SUMP
PART OF 366-2128, 366-2129 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N TX71-UP
REAR SUMP
PART OF 366-2128, 366-2129 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 166-2905 | [1] | SEAL-INTEGRAL | |
| 2. | 222-5921 | [1] | PAN-OIL | |
| 3. | 389-3709 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 238-5082 | [1] | SEAL-O-RING | ||
| 360-3682 | [1] | PLUG-O-RING | ||
| 4. | 4C-9612 B | SEALANT-SILICONE | ||
| 5. | 6V-3918 M | [36] | BOLT (M8X1.25X50-MM) | |
| 6. | 9M-1974 | [36] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 389-3708 | [1] | PLUG AS | |
| 214-7568 | [1] | SEAL-O-RING | ||
| 360-3679 | [1] | PLUG-CONNECTOR (9/16-18-THD) | ||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#KEBP03220057
212-3652: PISTON & ROD GP
212-3652 PISTON & ROD GP
S/N TX71-UP; C7C1-UP; KHX16002-UP
16.5:1 RATIO
PART OF 260-6629, 460-5902 ENGINE AR-CORE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
16.5:1 RATIO
PART OF 260-6629, 460-5902 ENGINE AR-CORE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 197-9353 | [1] | RING-PISTON (INTERMEDIATE) | |
| 2. | 524-6492 | [1] | PIN-PISTON | |
| 3. | 197-9372 | [2] | RETAINER-PIN | |
| 4. | 197-9386 | [1] | RING-PISTON (TOP) | |
| 5. | 213-3193 | [1] | ROD AS-CONNECTING (NON-DRILLED) | |
| 5A. | 2W-0027 | [1] | BEARING (EYE END) | |
| 5B. | 229-6266 M | [2] | BOLT (M11X1.25X65-MM) | |
| 6. | 224-6638 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 7. | 238-2706 | [1] | RING-PISTON (OIL) | |
| 8. | 238-2720 | [1] | BODY AS-PISTON | |
| 9. | 280-2748 | [1] | TUBE AS-OIL JET | |
| 10. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#KEBP03220058
159-0303: PLUG GP-CYLINDER BLOCK
159-0303 PLUG GP-CYLINDER BLOCK
S/N TX71-UP; C7C1-UP; KHX16002-UP
REQUIRED WHEN REMOTE MOUNT COOLANT CONDITIONER IS NOT USED
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
REQUIRED WHEN REMOTE MOUNT COOLANT CONDITIONER IS NOT USED
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
#KEBP03220059
162-8068: PLUG GP-ENGINE
162-8068 PLUG GP-ENGINE -ENGINE OIL
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH GM ENGINES ONLY
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
FOR USE WITH GM ENGINES ONLY
ALSO AN ATTACHMENT
For full view, you need register
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISInformation:
BASIC ENGINE
ENGINE GP
Special Instruction
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
