ELECTRICAL AND STARTING SYSTEM
SENSOR GPSTARTING MOTOR GP
SWITCH GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP#KEBP03220150
234-5012: SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 352-1490 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 352-1490 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220151
234-5013: SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 352-1490 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 352-1490 SENSOR GP-ENGINE
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220152
132-1418: STARTING MOTOR GP-ELECTRIC
132-1418 STARTING MOTOR GP-ELECTRIC
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 108-7808 M | [3] | BOLT (M10X1.5X35-MM) | |
2. | 6V-5839 | [3] | WASHER (11X21X2.5-MM THK) | |
3. | 3K-3257 | [1] | GASKET | |
4. | 134-2730 | [1] | WIRE AS | |
5. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
7. | 207-1541 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP03220153
207-1541: STARTING MOTOR GP-ELECTRIC
207-1541 STARTING MOTOR GP-ELECTRIC
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 132-1418 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1551@@@@@
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 132-1418 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1551@@@@@
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9F-2247 | [1] | PLUG-PIPE (1/8-27-THD) | |
2. | 7T-3279 | [1] | HOUSING AS | |
3. | 8T-8566 | [1] | TERMINAL AS | |
4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
6. | 3T-3422 | [1] | WIRE AS | |
7. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
8. | 7T-3277 | [1] | COIL AS-FIELD | |
9. | 7T-3454 | [1] | INSULATOR | |
10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
(INCLUDES CONNECTORS, TERMINAL & BOLT) | ||||
11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
15. | 8H-1141 | [4] | SHOE-POLE | |
16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
18. | 105-9702 | [1] | HOUSING AS | |
19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
20. | 7L-2894 | [1] | GASKET | |
21. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
22. | 6N-3827 | [1] | DRIVE AS-MOTOR | |
23. | 9X-9510 | [1] | HOUSING AS | |
24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
25. | 376-4353 | [1] | KIT-SOLENOID (24-VOLT)(24-VOLT) | |
(INCLUDES SOLENOID AS, BOLT, NUT AS, NUT, COVER, & CONNECTORS) | ||||
26. | 6V-8378 | [2] | NUT (10-32-THD) | |
27. | 8F-1434 | [2] | LOCKWASHER | |
28. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
29. | 9F-2547 | [1] | WICK | |
30. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
(INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT) | ||||
31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
(INCLUDES BRUSHES, SEAL, SCREWS & SPRINGS) | ||||
32. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
(INCLUDES INSULATORS & BUSHING) | ||||
AVAILABLE REPAIR KIT(S): | ||||
7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT, & SCREW ASSEMBLIES) |
#KEBP03220154
207-1551: STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
S/N C7C1-UP
24-VOLT
Type 1
FIELD REPLACEMENT FOR @@@@@207-1541@@@@@
S/N C7C1-UP
24-VOLT
Type 1
FIELD REPLACEMENT FOR @@@@@207-1541@@@@@
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9F-2247 | [1] | PLUG-PIPE (1/8-27-THD) | |
2. | 7T-3279 | [1] | HOUSING AS | |
3. | 8T-8566 | [1] | TERMINAL AS | |
4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
6. | 3T-3422 | [1] | WIRE AS | |
7. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
8. | 7T-3277 | [1] | COIL AS-FIELD | |
9. | 7T-3454 | [1] | INSULATOR | |
10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
(INCLUDES CONNECTORS, BOLT & TERMINAL) | ||||
11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
15. | 8H-1141 | [4] | SHOE-POLE | |
16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
18. | 105-9702 | [1] | HOUSING AS | |
19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
20. | 7L-2894 | [1] | GASKET | |
21. | 036-9823 | [5] | BOLT (1/4-28X1-IN) | |
22. | 6N-3827 | [1] | DRIVE AS-MOTOR | |
23. | 9X-9510 | [1] | HOUSING AS | |
24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
25. | 193-8570 | [1] | SOLENOID AS-STARTING MOTOR (24-VOLT)(STARTING MOTOR) | |
26. | 6V-8378 | [3] | NUT (10-32-THD) | |
27. | 8F-1434 | [2] | LOCKWASHER | |
28. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
29. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
30. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
(INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT) | ||||
31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
(INCLUDES BRUSHES, SEAL, SCREWS & SPRINGS) | ||||
32. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
(INCLUDES INSULATORS & BUSHING) | ||||
33. | 9F-2547 | [1] | WICK | |
AVAILABLE REPAIR KIT(S): | ||||
7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT & SCREW ASSEMBLIES) |
#KEBP03220155
207-1551: STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC
S/N C7C1-UP
24-VOLT
Type 2
FIELD REPLACEMENT FOR @@@@@207-1541@@@@@
S/N C7C1-UP
24-VOLT
Type 2
FIELD REPLACEMENT FOR @@@@@207-1541@@@@@
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9F-2247 | [1] | PLUG-PIPE (1/8-27-THD) | |
2. | 7T-3279 | [1] | HOUSING AS | |
3. | 8T-8566 | [1] | TERMINAL AS | |
4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
6. | 3T-3422 | [1] | WIRE AS | |
7. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
8. | 7T-3277 | [1] | COIL AS-FIELD | |
9. | 7T-3454 | [1] | INSULATOR | |
10. | 9F-2547 | [1] | WICK | |
11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
(INCLUDES INSULATOR TERMINALS & GROMMET) | ||||
12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
15. | 8H-1141 | [4] | SHOE-POLE | |
16. | 3R-8797 C | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
18. | 105-9702 | [1] | HOUSING AS | |
19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
20. | 7L-2894 | [1] | GASKET | |
21. | 0S-1597 C | [5] | BOLT (1/4-28X1-IN) | |
22. | 6N-3827 | [1] | DRIVE AS-MOTOR | |
23. | 9X-9510 | [1] | HOUSING AS | |
24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
25. | 548-9596 C | [1] | KIT-SOLENOID (24-VOLT) | |
(INCLUDES NUTS, BOLTS, CONNECTORS, &M INSTRUCTION SHEET) | ||||
26. | 6V-8378 | [3] | NUT (10-32-THD) | |
27. | 8F-1434 | [2] | LOCKWASHER | |
28. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
29. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
30. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
(INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT) | ||||
31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
(INCLUDES BRUSHES, SEAL, SCREWS, SCREW ASSEMBLIES & SPRINGS) | ||||
32. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
(INCLUDES INSULATORS & BUSHING) | ||||
AVAILABLE REPAIR KIT(S): | ||||
7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
(INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT, & SCREW ASSEMBLIES) | ||||
C | CHANGE FROM PREVIOUS TYPE |
#KEBP03220156
209-5582: SWITCH GP-MAGNETIC
209-5582 SWITCH GP-MAGNETIC -AIR INLET HEATER RELAY
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 262-0500 WIRING GP-HEATER
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
24-VOLT
PART OF 262-0500 WIRING GP-HEATER
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220157
258-0883: SWITCH GP-PRESSURE
258-0883 SWITCH GP-PRESSURE -FUEL FILTER
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 232-6135 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX16002-UP
PART OF 232-6135 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SIS#KEBP03220158
198-2714: WIRING GP-ENGINE
198-2714 WIRING GP-ENGINE
S/N C7C1-UP; KHX16002-55809
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N C7C1-UP; KHX16002-55809
PART OF 237-9249, 352-6166, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3S-2093 | [12] | STRAP-CABLE | |
2. | 4P-5918 | [1] | CLIP | |
4. | 198-2713 | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
305-5362 | [4] | TERMINAL AS (18-GA) | ||
180-9340 | [60] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
-OR- | ||||
126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
8T-8737 | [77] | PLUG-SEAL | ||
119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
211-6807 | [1] | COVER-CONNECTOR | ||
155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, & WEDGE) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
5. | 206-1345 | [9] | STRAP-CABLE | |
6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
135-5975 | [1] | GROMMET-WIRING | ||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
(INCLUDES PLUG AS & WEDGE) | ||||
7. | 4P-8134 | [1] | CLIP (LADDER) | |
8. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
9. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#KEBP03220159
352-3581: WIRING GP-ENGINE
352-3581 WIRING GP-ENGINE
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 237-9249, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TX71-UP; C7C1-UP; KHX55810-UP
PART OF 237-9249, 366-2128, 366-2129 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
Parts for your PM-102 COLD PLANER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 113-8690 J | [1] | WASHER (11.1X37.9X3.3-MM THK) | |
2. | 156-9890 J | [1] | WASHER (9X30X4-MM THK) | |
3. | 5P-4116 J | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
4. | 6V-5217 JM | [1] | BOLT (M8X1.25X20-MM) | |
5. | 6V-8212 JM | [1] | BOLT (M10X1.5X16-MM) | |
6. | 7X-7729 J | [1] | WASHER (11X25X3-MM THK) | |
7. | 3S-2093 | [16] | STRAP-CABLE | |
8. | 4P-5918 | [1] | CLIP | |
9. | 105-1797 | [2] | MOUNT | |
10. | 322-2733 Y | [1] | HARNESS AS-ENGINE (SENSORS) | |
11. | 519-5559 | [1] | CLIP | |
12. | 520-1511 Y | [1] | HARNESS AS-ENGINE (FUEL INJECTOR) | |
13. | 206-1345 | [7] | STRAP-CABLE | |
J | FOR SHIPPING & STORAGE PURPOSE ONLY | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0041 FMI 04 8 Volt DC Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0094 FMI 04 Fuel Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0261 FMI 13 Engine Timing Calibration required
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Speed/Timing Sensor - Calibrate
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Speed/Timing Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Temperature Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Disassembly and Assembly