AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

197-8545 CONTROL GP-PROPEL S/N C8F1-UP; P8F1-UP PART OF 216-9513 CONTROL GP-PROPEL Type 1 AN ATTACHMENT CS-74


OPERATOR STATION
CONTROL GP-PROPEL
CONTROL GP-STEERING
TILT GP-CAB
DOOR GP
DUCT GP
FILTER GP-CAB AIR

VIBRATORY COMPACTOR CS-74 VIBRATORY COMPACTOR C8F
 CS74 CP74 Vibratory Compactor C8F00001-UP (MACHINE) POWERED BY C6.6 Engine KEBP0329 CS-74 C8F   (2008)

OPERATOR STATION

CONTROL GP-PROPEL
CONTROL GP-PROPEL
197-3300 CONTROL GP-PROPEL
CONTROL GP-PROPEL
197-8545 CONTROL GP-PROPEL
CONTROL GP-PROPEL
197-8545 CONTROL GP-PROPEL
CONTROL GP-PROPEL
216-9513 CONTROL GP-PROPEL
 

#KEBP03290360
 

197-8545: CONTROL GP-PROPEL

197-8545 CONTROL GP-PROPEL
S/N C8F1-UP; P8F1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 1
AN ATTACHMENT
i01480361 KEBP0329
1978545 CONTROL GP-PROPEL Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-1282 [2] SCREW-MACHINE (1/4-20X0.75-IN)  
2. 009-9258 [2] NUT (1/4-20-THD)  
3. 186-3169 [2] SPACER  
4. 198-1111 [1] BUSHING  
5. 186-3171 [2] BUSHING  
6. 5B-3180 [1] NUT (5/16-18-THD)  
7. 031-4155 [1] LOCKNUT (5/16-18-THD)  
8. 7X-3393 [1] WASHER-HARD (8.3X19X1.83-MM THK)  
9. 140-9685 [4] WASHER-SPRING (8.64X22.1X1.9-MM THK)  
10. 077-7467 [2] RACE-THRUST BEARING  
11. 197-9181 [1] DISC-FRICTION  
12. 4L-1250 [3] LOCKNUT (10-32-THD)  
13. 166-8072 [2] SPRING-COMPRESSION  
14. 166-8070 [2] BOLT-SOCKET HEAD (10-32X11.18-MM)  
15. 166-8071 [1] BEARING-CONNECTING ROD  
16. 8L-6521 [1] BOLT (10-32X0.5-IN)  
17. 7X-2466 [1] CLIP  
18. 140-9337 [1] SWITCH-MICRO (NEUTRAL POSITION SENSOR)  
19. 171-2842 [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
20. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
21. 186-3380 Y [1] CONTROL GP-HANDLE (PROPEL LEVER)  
22. 198-3034 [1] LEVER  
23. 140-9338 [1] BOOT  
24. 8H-4959 [2] BOLT (10-32X0.875-IN)  
25. 098-3602 [1] SWIVEL  
26. 141-1794 [1] PIN-COTTER  
27. 3K-5761 [1] WASHER (0.328X0.62X0.032-IN THK)  
28. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
29. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 166-8068 [1] CLAMP-CABLE  
31. 186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
32. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 197-9238 [1] CUP-BEARING  
34. 197-9695 [1] BEARING-NEEDLE  
35. 218-9847 [1] WIRE AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290361
 

197-8545: CONTROL GP-PROPEL

197-8545 CONTROL GP-PROPEL
S/N C8F1-UP; P8F1-UP
PART OF 216-9513 CONTROL GP-PROPEL
Type 2
AN ATTACHMENT
i02959959 KEBP0329
1978545 CONTROL GP-PROPEL Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-1282 [2] SCREW-MACHINE (1/4-20X0.75-IN)  
2. 009-9258 [2] NUT (1/4-20-THD)  
3. 186-3169 [2] SPACER  
4. 198-1111 [1] BUSHING  
5. 186-3171 [2] BUSHING  
6. 5B-3180 [1] NUT (5/16-18-THD)  
7. 031-4155 [1] LOCKNUT (5/16-18-THD)  
8. 7X-3393 [1] WASHER-HARD (8.3X19X1.83-MM THK)  
9. 140-9685 [4] WASHER-SPRING (8.64X22.1X1.9-MM THK)  
10. 077-7467 [2] RACE-THRUST BEARING  
11. 197-9181 [1] DISC-FRICTION  
12. 4L-1250 C [5] LOCKNUT (10-32-THD)  
13. 166-8072 [2] SPRING-COMPRESSION  
14. 166-8070 [2] BOLT-SOCKET HEAD (10-32X11.18-MM)  
15. 166-8071 [1] BEARING-CONNECTING ROD  
16. 8L-6521 [1] BOLT (10-32X0.5-IN)  
17. 7X-2466 [1] CLIP  
18. 140-9337 [1] SWITCH-MICRO (NEUTRAL POSITION)  
19. 171-2842 [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
20. 8T-2658 M [2] LOCKNUT (M3X0.5-THD)  
21. 186-3380 Y [1] CONTROL GP-HANDLE (PROPEL LEVER)  
22. 198-3034 [1] LEVER  
23. 140-9338 [1] BOOT  
24. 8H-4959 [2] BOLT (10-32X0.875-IN)  
25. 098-3602 [1] SWIVEL  
26. 141-1794 [1] PIN-COTTER  
27. 3K-5761 [1] WASHER (0.328X0.62X0.032-IN THK)  
28. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
29. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 166-8068 [1] CLAMP-CABLE  
31. 9X-3401 C [2] PIN-CONNECTOR (16-GA TO 18-GA)  
32. 151-9274 C [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
33. 197-9238 [1] CUP-BEARING  
34. 197-9695 [1] BEARING-NEEDLE  
36. 8T-7931 [1] SETSCREW (1/2-20-THD)  
37. 245-2930 [1] NUT-JAM (1/2-20-THD)(1/4-20-THD)  
38. 245-2931 [1] SWITCH AS-BALL  
39. 245-2959 [1] LOCKNUT-SPECIAL (9/16-18-THD)  
40. 125-7876 CE TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290362
 

216-9513: CONTROL GP-PROPEL

216-9513 CONTROL GP-PROPEL
S/N C8F1-UP; P8F1-UP
PART OF 282-9925 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT
i01852973 KEBP0329
2169513 CONTROL GP-PROPEL Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-6329 [1] BEZEL  
2. 6V-8927 [2] BOLT-SOCKET HEAD (6-32X0.5-IN)  
3. 116-0118 [1] CLIP  
4. 194-1924 [1] HARNESS AS (VIBRATORY CONTROL)  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2272 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  1S-9593 [5] STRAP-CABLE  
  5P-2321 [4] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
5. 194-3748 [1] FILM-IDENTIFICATION (VIBRATORY)  
6. 197-3229 [1] FILM-IDENTIFICATION (OPERATOR CONTROLS)  
7. 197-8545 Y [1] CONTROL GP-PROPEL  
8. 6T-3990 [1] SWITCH AS-ROCKER (AUTO VIB)  
  3L-8187 [2] LOCKWASHER  
  6V-8374 [2] SCREW-MACHINE (6-32X0.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290363
 

262-0879: CONTROL GP-STEERING

262-0879 CONTROL GP-STEERING
S/N C8F1-604; P8F1-173
PART OF 308-2687 HYDRAULIC AR-AUXILIARY
i02814432 KEBP0329
2620879 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-8568 [1] BUTTON AS-HORN  
2. 9D-7924 [4] MOUNTING AS  
3. 107-6141 [1] COVER  
4. 111-7878 [1] COVER  
5. 134-2364 [1] ANGLE AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
6. 329-5717 [1] STEERING WHEEL AS  
7. 153-7369 Y [1] KNOB GP-STEERING  
8. 176-9166 [1] COLUMN AS (STEERING)  
  149-0777 [1] KNOB (STEERING COLUMN)  
  149-0779 [1] KIT-SHAFT (STEERING COLUMN)  
    (INCLUDES RING RETAINER, O-RING SEAL, PROTECTOR & GREASE PACKET)
  176-9170 [1] KIT-GAS SPRING (STEERING COLUMN)  
    (INCLUDES SPRINGS, SCREWS, DOWEL PINS & TILT LEVER)
  220-3926 [1] KIT-REPAIR (HORN)  
    (INCLUDES HORN CONTACT AS, SCREWS & GREASE)
9. 217-8058 [1] WIRE AS  
10. 225-6323 [1] PLATE AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
11. 314-2404 [1] BOOT  
12. 311-8390 [1] SUPPORT AS  
13. 366-0165 [1] VALVE GP-FLOW CONTROL (STEERING)  
14. 105-3484 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
15. 148-8340 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR (SEAL)  
16. 148-8342 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8632 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
17. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 6V-8227 M [1] NUT (M18X1.5-THD)  
19. 7X-0578 [8] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
21. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-4908 M [5] BOLT (M8X1.25X25-MM)  
24. 8T-6869 M [4] BOLT (M8X1.25X60-MM)  
25. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290364
 

262-0879: CONTROL GP-STEERING

262-0879 CONTROL GP-STEERING
S/N C8F605-UP; P8F174-UP
PART OF 308-2687 HYDRAULIC AR-AUXILIARY
i05434182 KEBP0329
2620879 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-8568 [1] BUTTON AS-HORN  
2. 9D-7924 [4] MOUNTING AS  
3. 107-6141 [1] COVER  
4. 111-7878 [1] COVER  
5. 134-2364 [1] ANGLE AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
6. 363-5911 C [1] STEERING WHEEL AS  
  363-6423 [1] PLUG  
7. 8R-2918 C [1] KNOB AS  
  8T-4244 M [1] NUT (M12X1.75-THD)  
8. 176-9166 [1] COLUMN AS (STEERING)  
  149-0777 [1] KNOB (STEERING COLUMN)  
  149-0779 [1] KIT-SHAFT (STEERING COLUMN)  
    (INCLUDES RINGS, PROTECTOR & GREASE)
  176-9170 [1] KIT-GAS SPRING (STEERING COLUMN)  
    (INCLUDES SPRINGS, SCREWS, PINS & LEVER)
  220-3926 [1] KIT-REPAIR (HORN)  
    (INCLUDES HORN AS, SCREWS & GREASE)
9. 217-8058 [1] WIRE AS  
10. 225-6323 [1] PLATE AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
11. 314-2404 [1] BOOT  
12. 311-8390 [1] SUPPORT AS  
13. 366-0165 [1] VALVE GP-FLOW CONTROL (STEERING)  
14. 105-3484 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
15. 148-8340 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR (SEAL)  
16. 148-8342 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8632 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
17. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 6V-8227 M [1] NUT (M18X1.5-THD)  
19. 7X-0578 [8] WASHER-HARD (10.2X32X2.5-MM THK)  
20. 8T-0267 M [1] BOLT-SOCKET HEAD (M6X1X12-MM)  
21. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
22. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8T-4908 M [5] BOLT (M8X1.25X25-MM)  
24. 8T-6869 M [4] BOLT (M8X1.25X60-MM)  
25. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
26. 361-2564 C [1] COVER  
27. 174-8131 CM [3] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#KEBP03290365
 

307-9804: CYLINDER & MTG GP-TILT

307-9804 CYLINDER & MTG GP-TILT
S/N C8F1-UP; P8F1-UP
AN ATTACHMENT
i02816205 KEBP0329
3079804 CYLINDER & MTG GP-TILT Parts scheme 3079804 CYLINDER & MTG GP-TILT Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-6893 [1] ELBOW  
2. 7X-0564 [2] WASHER-HARD (20X51X3-MM THK)  
3. 081-3119 [2] SEAL-RUBBER  
4. 081-3772 [1] LEVER  
5. 107-2207 [2] RIVET-POP  
6. 128-1624 [1] SUPPORT AS  
7. 128-4119 [1] CYLINDER AS-TILT  
8. 128-4120 [1] PUMP AS-HAND (TILT CYLINDER)  
  [1] FILM-INSTRUCTION (CAB LIFT)  
9. 147-7370 [1] BRACKET AS  
10. 373-2353 I [2] HOSE AS  
11. 167-1192 [2] CLIP  
12. 148-8320 [3] CONNECTOR AS  
    (EACH INCLUDES)
  8C-6865 [1] CONNECTOR  
  4J-5477 [1] SEAL-O-RING  
13. 3E-9862 [2] LOCKNUT (3/4-10-THD)  
14. 4J-5477 [1] SEAL-O-RING  
15. 7X-0370 [1] BOLT (3/4-10X3.5-IN)  
16. 7X-7729 [2] WASHER (11X25X3-MM THK)  
17. 8C-6857 [1] BOLT (3/4-10X2.75-IN)  
18. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
19. 7X-2553 M [4] BOLT (M16X2X40-MM)  
20. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#KEBP03290366
 

223-4276: DOOR GP-CAB

223-4276 DOOR GP-CAB -SLIDING WINDOW, LH
S/N C8F1-UP; P8F1-UP
PART OF 320-9873 ROPS GP-ENCLOSED
Type 1
AN ATTACHMENT
i01794124 KEBP0329
2234276 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-5201 [1] BEARING  
2. 109-5008 [1] BUMPER-CONICAL  
3. 7W-2108 [1] SPRING-BYPASS VALVE  
4. 7X-2497 [1] HANDLE-DOOR  
5. 8T-4180 M [4] SCREW-MACHINE (M5X0.8X20-MM)  
6. 8T-4742 [1] END-YOKE ROD  
7. 8T-4747 [2] BRACKET  
8. 8Y-4807 J [1] HANDLE AS (DOOR, LH)  
  8Y-4501 [1] SPRING-HANDLE  
9. 8Y-6386 [1] SEAL-HANDLE  
10. 9G-2761 [1] LATCH AS-DOOR  
11. 107-6117 [1] COVER (LH)  
12. 141-8580 [1] RING-RETAINING  
13. 161-9640 [1] COVER  
14. 161-9641 [1] PLATE  
15. 161-9642 [1] ROD AS  
16. 161-9647 [1] PLATE  
17. 162-2188 [1] DOOR AS (LH)  
  [2] INSERT  
  107-6125 [2] HINGE AS  
    (EACH INCLUDES)
  096-2323 [2] RING-RETAINING (EXTERNAL)  
  [1] STRIP  
  111-0200 [1] HANDRAIL  
  115-1552 [1] HANDLE-PULL  
18. 162-2190 [1] GLASS-CAB (DOOR)  
19. 168-2457 [1] LATCH AS-DOOR (HOLD OPEN)  
20. 169-3995 [1] SEAL  
21. 4E-1384 [1] BUMPER-CONICAL  
22. 180-3871 Y [1] WINDOW GP-DOOR (SLIDING)  
23. 5C-2890 M [1] NUT (M6X1-THD)  
24. 5C-7261 M [2] NUT (M8X1.25-THD)  
25. 8T-4181 M [5] BOLT (M6X1X20-MM)  
26. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 8T-4971 M [4] BOLT (M6X1X30-MM)  
28. 9X-2042 M [11] SCREW-TRUSS HEAD (M6X1X12-MM)  
29. 3E-3805 E SEAL (420-CM)  
30. 118-3094 M [2] BOSS-THREADED (M8X1.25-THD)  
31. 157-8861 [2] ROD-THREADED  
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290367
 

223-4276: DOOR GP-CAB

223-4276 DOOR GP-CAB -SLIDING WINDOW, LH
S/N C8F1-UP; P8F1-UP
PART OF 320-9873 ROPS GP-ENCLOSED
Type 2
AN ATTACHMENT
i04241173 KEBP0329
2234276 DOOR GP-CAB Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3T-5201 [1] BEARING  
2. 109-5008 [1] BUMPER-CONICAL  
3. 7W-2108 [1] SPRING-BYPASS VALVE  
4. 7X-2497 [1] HANDLE-DOOR  
5. 8T-4180 M [4] SCREW-MACHINE (M5X0.8X20-MM)  
6. 8T-4742 [1] END-YOKE ROD  
7. 8T-4747 [2] BRACKET  
8. 8Y-4807 J [1] HANDLE AS  
  8Y-4501 [1] SPRING-HANDLE  
9. 8Y-6386 [1] SEAL-HANDLE  
10. 9G-2761 [1] LATCH AS-DOOR  
11. 107-6117 [1] COVER (LH)  
12. 141-8580 [1] RING-RETAINING  
13. 161-9640 [1] COVER  
14. 161-9641 [1] PLATE  
15. 161-9642 [1] ROD AS  
16. 161-9647 [1] PLATE  
17. 360-7448 C [1] DOOR AS (LH)  
18. 162-2190 [1] GLASS-CAB (DOOR)  
19. 168-2457 [1] LATCH AS-DOOR (HOLD OPEN)  
20. 169-3995 [1] SEAL  
21. 4E-1384 [1] BUMPER-CONICAL  
22. 352-4153 CY [1] WINDOW GP-CAB (SLIDING)  
23. 5C-2890 M [1] NUT (M6X1-THD)  
24. 5C-7261 M [2] NUT (M8X1.25-THD)  
25. 8T-4181 M [5] BOLT (M6X1X20-MM)  
26. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 8T-4971 M [4] BOLT (M6X1X30-MM)  
28. 9X-2042 M [11] SCREW-TRUSS HEAD (M6X1X12-MM)  
29. 3E-3805 E SEAL (420-CM)  
30. 118-3094 M [2] BOSS-THREADED (M8X1.25-THD)  
31. 157-8861 [2] ROD-THREADED  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03290368
 

143-5948: DUCT GP-CAB AIR

143-5948 DUCT GP-CAB AIR
S/N C8F1-UP; P8F1-UP
PART OF 320-9870 CAB AR
AN ATTACHMENT
i01263250 KEBP0329
1435948 DUCT GP-CAB AIR Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-7119 [2] SUPPORT  
2. 8Y-6388 [6] LOUVER AS-VENT  
3. 104-2091 [28] SCREW-FLAT HEAD (6-20X0.5-IN)  
4. 119-3859 [15] SCREW-PAN HEAD (10-16X0.75-IN)  
5. 149-9933 [1] DUCT  
6. 154-1643 [1] DUCT AS  
7. 6V-5217 M [2] BOLT (M8X1.25X20-MM)  
8. 8T-4171 M [2] BOLT (M6X1X12-MM)  
9. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
10. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
11. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
12. 5P-5927 D SEAL (1.2-M)  
12A. 5P-5927 D SEAL (0.75-M EACH)  
13. 166-9098 [1] COVER  
14. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
15. 7Y-7394 M [2] SCREW-BUTTON HEAD (M8X1.25X25-MM)  
16. 164-8473 [4] LOUVER AS  
17. 5C-7261 M [4] NUT (M8X1.25-THD)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#KEBP03290369
 

240-4607: FILTER GP-CAB AIR

240-4607 FILTER GP-CAB AIR
S/N C8F1-UP; P8F1-UP
PART OF 262-0918, 267-2168 OPERATOR AR
AN ATTACHMENT
i02079384 KEBP0329
2404607 FILTER GP-CAB AIR Parts scheme
  For full view, you need register

Parts for your CS-74 VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-7856 [2] KNOB (AIR CONDITIONER)  
2. 127-8613 [1] GASKET  
3. 180-7486 [1] COVER AS  
4. 180-7487 [1] FILTER ELEMENT-CAB AIR (ACTIVATED CHARCOAL)(AIR FLOW DIRECTION)  
 

Information:

Caterpillar Parts SIS Catalog CS-74 :

CONTROL GP-PROPEL
197-3300 CONTROL GP-PROPEL
CONTROL GP-HANDLE
186-3380 CONTROL GP-HANDLE
CONTROL GP-DIRECTION & SPEED
310-4090 CONTROL GP-DIRECTION & SPEED
CONTROL GP-DIRECTION & SPEED
310-4090 CONTROL GP-DIRECTION & SPEED
CONTROL GP-DIRECTION & SPEED
282-9925 CONTROL GP-DIRECTION & SPEED
CONTROL GP-DIRECTION & SPEED
282-9924 CONTROL GP-DIRECTION & SPEED
CONTROL GP-BLADE
272-9725 CONTROL GP-BLADE
CONTROL GP-BLADE
272-9725 CONTROL GP-BLADE
CONTROL GP-PROPEL
197-8545 CONTROL GP-PROPEL
CONTROL GP-PROPEL
216-9513 CONTROL GP-PROPEL
CONTROL GP-STEERING
262-0879 CONTROL GP-STEERING
CONTROL GP-STEERING
262-0879 CONTROL GP-STEERING
CYLINDER & MTG GP-TILT
307-9804 CYLINDER & MTG GP-TILT
DOOR GP-CAB
223-4276 DOOR GP-CAB
DOOR GP-CAB
223-4276 DOOR GP-CAB
DUCT GP-CAB AIR
143-5948 DUCT GP-CAB AIR

Truck sale:

 
On Request 
Caterpillar CS74, Construction
- Single drum rollers
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
 
 
Caterpillar CS74, Construction
- Single drum rollers
OOO MANTRAC VOSTOK
Russia
Caterpillar CS74, Construction
 
Caterpillar CS74, Construction
- Single drum rollers
MANTRAC UGANDA LTD
Uganda
Caterpillar CS74, Construction
64,912 
Caterpillar CS74, Construction
- Single drum rollers
MICHIGAN CAT
Caterpillar CS74, Construction
110,000 
Caterpillar CS74, Construction
- Single drum rollers
WESTERN STATES EQUIPMENT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.