AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

190-6564 ALTERNATOR GP-CHARGING S/N TXH1-UP; RHX1-UP PART OF 234-7925, 366-2136 ENGINE AR-COMPLETE PM-200


ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
CONNECTION GP
CONTROL GP-ELECTRONIC
HARNESS GP

COLD PLANER PM-200 COLD PLANER P1M
 C-18 Caterpillar Engine For PM200 Cold Planer P1M00001-UP (MACHINE) POWERED BY C-18 Engine KEBP0335 PM-200 P1M   (2006)

ELECTRICAL AND STARTING SYSTEM

ALTERNATOR GP-CHARGING
MOUNTING GP-ALTERNATOR
368-9106 MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
188-1754 MOUNTING GP-ALTERNATOR & COMPR
ALTERNATOR GP-CHARGING
190-6564 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
226-7683 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
372-7489 ALTERNATOR GP-CHARGING
 

#KEBP03350180
 

190-6564: ALTERNATOR GP-CHARGING

190-6564 ALTERNATOR GP-CHARGING
S/N TXH1-UP; RHX1-UP
PART OF 234-7925, 366-2136 ENGINE AR-COMPLETE
i02588295 KEBP0335
1906564 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-3635 [1] PULLEY (8-GROOVE)  
2. 197-8820 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)  
3. 262-5050 [1] WIRE AS  
4. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
5. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
7. 1A-1460 [1] BOLT (1/2-13X2-IN)  
8. 2A-1531 [1] BOLT (1/2-13X6.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03350181
 

197-8820: ALTERNATOR GP-CHARGING

197-8820 ALTERNATOR GP-CHARGING
S/N TXH1-UP; RHX1-UP
PART OF 190-6564 ALTERNATOR GP-CHARGING
i02588296 KEBP0335
1978820 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-2653 [1] FRAME  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 185-2645 [1] FRAME  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 205-0626 [1] STATOR AS-ALTERNATOR  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
21. 185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
22. 199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, PLATE, INSULATOR, PIN, BOLTS, GROMMET & NUTS)
23. 199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS & NUTS)
24. 185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
 

#KEBP03350182
 

226-7683: ALTERNATOR GP-CHARGING

226-7683 ALTERNATOR GP-CHARGING
S/N TXH1962-UP
24-VOLT, 95-AMPERE
PART OF 372-7489 ALTERNATOR GP-CHARGING
i05000378 KEBP0335
2267683 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-9656 [1] FRAME AS-DRIVE END  
2. 5S-7349 [1] BOLT (1/4-20X0.5-IN)  
3. 185-2639 [1] FAN AS  
4. 1H-3244 [1] LOCKWASHER  
5. 228-9655 [1] FRAME AS-ALTERNATOR  
6. 2K-4821 [1] LOCKNUT (5/8-18-THD)  
7. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
8. 228-9657 [1] COVER AS  
9. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 185-2647 [1] GROMMET  
11. 9L-6770 [1] CAP-DUST  
12. 205-0626 [1] STATOR AS-ALTERNATOR  
13. 185-2638 [2] COLLAR  
14. 185-2654 [1] PLATE  
15. 185-2650 [1] ROTOR AS  
16. 185-2644 [1] COIL AS  
17. 185-2648 [1] REGULATOR AS-VOLTAGE (24-VOLT)(ALTERNATOR)  
18. 6V-8189 [1] NUT (5/16-18-THD)  
19. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
20. 3F-9556 [1] LOCKWASHER  
   
    AVAILABLE REPAIR KIT(S):
  185-2655 [1] KIT-BEARING (ALTERNATOR)  
    (INCLUDES BEARINGS)
  185-2658 [1] KIT-HARDWARE (ALTERNATOR AIR)  
    (INCLUDES BOLTS)
  199-8436 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES HOLDER AS, GROMMET, PLATE, PIN, INSULATOR, NUT)
  199-7891 [1] KIT-TERMINAL (ALTERNATOR AIR)  
    (INCLUDES INSULATORS, WASHERS, NUTS)
 

#KEBP03350183
 

372-7489: ALTERNATOR GP-CHARGING

372-7489 ALTERNATOR GP-CHARGING
S/N TXH1962-UP
PART OF 234-7925 ENGINE AR-COMPLETE
i05000331 KEBP0335
3727489 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-3635 [1] PULLEY (8-GROOVE)(8-GROOVE)  
2. 226-7683 Y [1] ALTERNATOR GP-CHARGING (24-VOLT, 95-AMPERE)  
3. 355-7402 [1] CABLE AS  
4. 6V-8801 [1] NUT (3/8-16-THD)  
5. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4198 M [4] BOLT (M10X1.5X100-MM)  
7. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 8T-5409 [1] STUD-TAPERLOCK (3/8-16X1.57-IN)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03350184
 

159-9107: CONNECTION GP-ELECTRICAL

159-9107 CONNECTION GP-ELECTRICAL
S/N TXH1-UP; RHX1-UP
PART OF 234-7925, 366-2136 ENGINE AR-COMPLETE
i02592915 KEBP0335
1599107 CONNECTION GP-ELECTRICAL Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 174-9599 [1] STUD (3/8-16-THD)  
2. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 6V-8801 [1] NUT (3/8-16-THD)  
 

#KEBP03350185
 

241-7598: CONTROL & MTG GP-ENGINE ELEK

241-7598 CONTROL & MTG GP-ENGINE ELEK
S/N TXH1-UP; RHX1-UP
PART OF 234-7925, 366-2136 ENGINE AR-COMPLETE
i02592968 KEBP0335
2417598 CONTROL & MTG GP-ENGINE ELEK Parts scheme
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
2. 155-0696 [1] SUPPORT AS  
  5L-3708 [1] STUD-TAPERLOCK (5/16-18X1.28-IN)  
3. 155-0698 [1] SUPPORT AS  
  5L-3708 [1] STUD-TAPERLOCK (5/16-18X1.28-IN)  
4. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
5. 224-9907 [4] STUD (5/16-18-THD)  
6. 372-2906 [1] CONTROL GP-UNPROGRAMMED (ENGINE)  
7. 233-0891 [2] BRACKET AS  
8. 8T-9655 [8] MOUNT-ISOLATION  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP03350186
 

354-0049: HARNESS AS-ENGINE

354-0049 HARNESS AS-ENGINE
S/N TXH1-UP; RHX1-UP
PART OF 357-0525 WIRING GP-ELECTRONIC CONTROL
i04807208 KEBP0335
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  211-6807 [1] COVER-CONNECTOR  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
  8T-8737 [93] PLUG-SEAL  
  289-5150 E SLEEVE (9-CM)  
  9X-3402 [68] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [68] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [1] STRAP-CABLE  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  E   ORDER BY THE CENTIMETER
 

#KEBP03350187
 

249-5293: HARNESS AS-SENSOR

249-5293 HARNESS AS-SENSOR
S/N RHX1-UP
i05962804 KEBP0335
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  9X-1813 E SLEEVE (45-CM)  
  194-5226 [6] WIRE AS (16-GA)  
    -OR-
  194-5227 [6] WIRE AS (14-GA)  
  E   ORDER BY THE CENTIMETER
 

#KEBP03350188
 

357-4244: HARNESS AS-SENSOR

357-4244 HARNESS AS-SENSOR
S/N TXH1-UP; RHX1-UP
PART OF 356-8383 MOUNTING GP-FUEL FILTER
i04797643 KEBP0335
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTABLE AS, WEDGE, & INTERFACE SEAL)
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [9] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  8T-8737 [1] PLUG-SEAL  
  230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  289-5150 E SLEEVE (13-CM)  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  E   ORDER BY THE CENTIMETER
 

#KEBP03350189
 

425-0289: HARNESS AS-WIRING

425-0289 HARNESS AS-WIRING
S/N TXH3875-UP; RHX3875-UP
PART OF 278-5662 BASE GP-VALVE COVER & INJ HARN
i05294777 KEBP0335
  For full view, you need register

Parts for your PM-200 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  103-8134 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [9] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [9] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [3] PLUG-SEAL  
 

Information:

Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
PM-200 Cold Planer
Special Instruction
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE ALTERNATOR ON CERTAIN PM-200 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE ALTERNATOR ON CERTAIN PM-200 COLD PLANERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator and Regulator
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Alternator Mounting
C15 and C18 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE ALTERNATOR ON CERTAIN PM-200 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR RELOCATING THE ALTERNATOR ON CERTAIN PM-200 COLD PLANERS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Charging System - Test
C15 and C18 Engines for Caterpillar Built Machines
Troubleshooting
Alternator - Charging Problem and/or Noisy Operation
C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Alternator - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Alternator - Remove and Install
PM200 Cold Planer C18 Engine Supplement
Service Magazine
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

Caterpillar Parts SIS Catalog PM-200 :

VALVE GP-FUEL BYPASS
139-6873 VALVE GP-FUEL BYPASS
VALVE GP-CHECK
382-6044 VALVE GP-CHECK
VALVE GP-CHECK
281-2725 VALVE GP-CHECK
VALVE GP-CHECK
233-6742 VALVE GP-CHECK
PUMP GP-FUEL TRANSFER
384-8612 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL PRIMING
183-2824 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
165-9154 PUMP GP-FUEL PRIMING
PUMP GP-FUEL INJECTION
294-7615 PUMP GP-FUEL INJECTION
ALTERNATOR GP-CHARGING
197-8820 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
226-7683 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
372-7489 ALTERNATOR GP-CHARGING
CONNECTION GP-ELECTRICAL
159-9107 CONNECTION GP-ELECTRICAL
CONTROL & MTG GP-ENGINE ELEK
241-7598 CONTROL & MTG GP-ENGINE ELEK
354-0049 HARNESS AS-ENGINE
249-5293 HARNESS AS-SENSOR
357-4244 HARNESS AS-SENSOR

Truck sale:

Caterpillar PM-200
 
Caterpillar PM-200
- Asphalt cold milling machines
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
 
118.989 
Caterpillar PM200, Strassenfertiger, Bau-Und Bergbauausrüstung


Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
 
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
- Asphalt cold milling machines
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
 
Caterpillar PM200, Asphaltfräsen, Bau-Und Bergbauausrüstung
- Asphalt cold milling machines
CGT - COMPAGNIA GENERALE TRATTORI
Italy
Caterpillar PM-200, Construction
 
Caterpillar PM-200, Construction
- Asphalt cold milling machines
CATERPILLAR CREDITO, S.A. DE C.V.
Mexico
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.