ELECTRICAL AND STARTING SYSTEM
WIRING GPLIGHTING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#KEBP03370340
304-9107: WIRING GP-HEATER
304-9107 WIRING GP-HEATER -RH
S/N MAN1-UP
PART OF 297-2488 WIRING GP-SCREED
AN ATTACHMENT
S/N MAN1-UP
PART OF 297-2488 WIRING GP-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-5300 | [3] | CLIP | |
| 2. | 309-7502 | [1] | HARNESS AS-WIRING (250-MM EXTENSION, RH) | |
| 240-5877 E | CONDUIT-FLEXIBLE (12-MM ID)(100-CM) | |||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 129-7163 | [2] | PLUG AS-CONNECTOR (1-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1541 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(15-CM) | |||
| 3. | 8T-0642 M | [2] | BOLT (M8X1.25X14-MM) | |
| 4. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 6V-8212 M | [2] | BOLT (M10X1.5X16-MM) | |
| 7. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 8. | 7F-6998 | [3] | LOCKWASHER | |
| 9. | 101-3917 | [5] | WASHER (10.5X21X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03370341
304-9108: WIRING GP-HEATER
304-9108 WIRING GP-HEATER -LH
S/N MAN1-UP
PART OF 297-2488 WIRING GP-SCREED
AN ATTACHMENT
S/N MAN1-UP
PART OF 297-2488 WIRING GP-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-5300 | [3] | CLIP | |
| 2. | 309-7503 Y | [1] | HARNESS AS-WIRING (250-MM EXTENSION, LH) | |
| 3. | 8T-0642 M | [2] | BOLT (M8X1.25X14-MM) | |
| 4. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 7. | 6V-8212 M | [2] | BOLT (M10X1.5X16-MM) | |
| 8. | 7F-6998 | [3] | LOCKWASHER | |
| 9. | 101-3917 | [5] | WASHER (10.5X21X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370342
307-9155: WIRING GP-HEATER
307-9155 WIRING GP-HEATER
S/N MAN1-UP
PART OF 320-2490 HEATER AR-SCREED
Type 1
AN ATTACHMENT
S/N MAN1-UP
PART OF 320-2490 HEATER AR-SCREED
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 116-0118 | [30] | CLIP | |
| 2. | 138-4572 | [3] | COVER | |
| 3. | 148-0342 | [6] | CLAMP | |
| 4. | 291-3876 | [1] | PANEL GP-CONTROL | |
| 229-3128 | [1] | PANEL AS | ||
| 5. | 286-3636 | [1] | SUPPORT | |
| 6. | 288-9429 | [1] | SUPPORT AS-CONTROL | |
| 7T-1099 | [4] | LINK | ||
| 7. | 296-7912 | [1] | BOX AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 296-7913 | [1] | PLATE | ||
| 8. | 296-7914 | [1] | COVER | |
| 9. | 307-9146 | [1] | HARNESS AS-SCREED (ELECTRIC HEAT, MAIN, RH) | |
| 10. | 307-9147 | [1] | HARNESS AS-SCREED (ELECTRIC HEAT, MAIN, LH) | |
| 11. | 307-9156 Y | [1] | BOX GP-RELAY | |
| 12. | 319-7146 | [1] | HARNESS AS-SCREED (MOUNTING) | |
| 13. | 319-7147 | [1] | MOUNTING GP | |
| 8T-9534 M | [2] | BOLT (M6X1X50-MM) | ||
| 219-3299 | [2] | CLAMP-HALF | ||
| 14. | 319-7149 | [1] | HARNESS AS-SCREED (EXTENDER, RH) | |
| 15. | 319-7150 | [1] | HARNESS AS-SCREED (EXTENDER, LH) | |
| 16. | 130-5300 | [3] | CLIP | |
| 17. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 18. | 139-0428 | [6] | CLAMP | |
| 19. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 20. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 21. | 5P-7854 | [2] | CLIP | |
| 22. | 6V-4298 M | [4] | BOLT (M5X0.8X16-MM) | |
| 23. | 6V-8653 M | [6] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 24. | 7K-1181 | [6] | STRAP-CABLE | |
| 25. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 26. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 28. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 29. | 8T-4199 M | [21] | BOLT (M8X1.25X12-MM) | |
| 30. | 8T-4224 | [21] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 32. | 8T-6912 M | [3] | BOLT (M8X1.25X50-MM) | |
| 33. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 34. | 9X-8256 | [10] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370343
307-9155: WIRING GP-HEATER
307-9155 WIRING GP-HEATER
S/N MAN1-UP
PART OF 320-2490 HEATER AR-SCREED
Type 2
AN ATTACHMENT
S/N MAN1-UP
PART OF 320-2490 HEATER AR-SCREED
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-1326 | [4] | LOCKWASHER (EXTERNAL TOOTH) | |
| 2. | 7H-3937 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 3. | 7K-1181 | [6] | STRAP-CABLE | |
| 4. | 116-0118 | [30] | CLIP | |
| 5. | 138-4572 | [3] | COVER | |
| 6. | 148-0342 | [6] | CLAMP | |
| 7. | 154-4890 M | [2] | BOLT-STACKING (M8X1.25X33-MM) | |
| 8. | 288-9429 | [1] | SUPPORT AS-CONTROL | |
| 7T-1099 | [4] | LINK | ||
| 9. | 291-3876 | [1] | PANEL GP-CONTROL | |
| 229-3128 | [1] | PANEL AS | ||
| 10. | 296-7912 | [1] | BOX AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 296-7913 | [1] | PLATE | ||
| 11. | 296-7914 | [1] | COVER | |
| 12. | 307-9146 | [1] | HARNESS AS-SCREED (ELECTRIC HEAT, MAIN, RH) | |
| 8N-1541 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 129-7163 | [8] | PLUG AS-CONNECTOR (1-PIN) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 13. | 307-9147 | [1] | HARNESS AS-SCREED (ELECTRIC HEAT, MAIN, LH) | |
| 8N-1541 | [8] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 129-7163 | [8] | PLUG AS-CONNECTOR (1-PIN) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 14. | 319-7146 | [1] | HARNESS AS-SCREED (MOUNTING) | |
| 231-9895 E | CONDUIT-FLEXIBLE (21.9-MM ID)(140-CM) | |||
| 7T-0093 | [12] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 177-9656 | [6] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9G-3695 | [12] | PLUG-SEAL | ||
| 177-9653 | [3] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0094 | [12] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 8T-2225 E | TUBE-HEAT SHRINK (25.4-MM DIA)(18-CM) | |||
| 15. | 319-7147 | [1] | MOUNTING GP | |
| 7R-7941 | [2] | CLAMP | ||
| 7R-7951 | [1] | PLATE | ||
| 7X-2535 M | [2] | BOLT (M6X1X60-MM) | ||
| 16. | 319-7149 | [1] | HARNESS AS-SCREED (EXTENDER, RH) | |
| 129-7163 | [6] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9G-3695 | [6] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 160-2250 G | SLEEVE-ABRASION (102.4-IN) | |||
| 8N-1541 | [6] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 17. | 319-7150 | [1] | HARNESS AS-SCREED (EXTENDER, LH) | |
| 129-7163 | [6] | PLUG AS-CONNECTOR (1-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9G-3695 | [6] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 160-2250 G | SLEEVE-ABRASION (153.6-IN) | |||
| 8N-1541 | [6] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 180-9340 | [6] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 18. | 353-5256 C | [1] | SUPPORT | |
| 19. | 356-4233 CY | [1] | BOX GP-RELAY | |
| 20. | 130-5300 | [3] | CLIP | |
| 21. | 131-3540 M | [2] | LOCKNUT (M8X1.25-THD) | |
| 22. | 139-0428 | [6] | CLAMP | |
| 23. | 260-6676 M | [1] | BOLT (M8X1.25X16-MM) | |
| 24. | 1R-5396 M | [6] | BOLT (M6X1X35-MM) | |
| 25. | 5P-4115 C | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 26. | 5P-4116 | [6] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 27. | 5P-7854 | [2] | CLIP | |
| 28. | 6V-4248 M | [2] | BOLT (M10X1.5X25-MM) | |
| 29. | 7I-2273 M | [4] | BOLT (M5X0.8X16-MM) | |
| 30. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 31. | 6V-8212 M | [2] | BOLT (M10X1.5X16-MM) | |
| 32. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 33. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 35. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
| 36. | 8T-4171 M | [4] | BOLT (M6X1X12-MM) | |
| 37. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 38. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 39. | 8T-4199 M | [22] | BOLT (M8X1.25X12-MM) | |
| 40. | 8T-4224 | [24] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 8T-4970 CM | [4] | BOLT (M6X1X14-MM) | |
| 42. | 8T-6912 M | [3] | BOLT (M8X1.25X50-MM) | |
| 43. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 44. | 9X-8256 C | [8] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370344
307-9166: WIRING GP-HEATER
307-9166 WIRING GP-HEATER -LPG
S/N MAN1-UP
PART OF 319-7155 WIRING GP-HEATER
AN ATTACHMENT
S/N MAN1-UP
PART OF 319-7155 WIRING GP-HEATER
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 289-8452 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 3) | |
| 2. | 306-6668 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 4) | |
| 3. | 309-2698 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 1) | |
| 4. | 312-5018 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 2) | |
| 5. | 232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(76-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#KEBP03370345
319-7155: WIRING GP-HEATER
319-7155 WIRING GP-HEATER -LPG HEAT
S/N MAN1-UP
PART OF 286-3632 WIRING GP-HEATER
AN ATTACHMENT
S/N MAN1-UP
PART OF 286-3632 WIRING GP-HEATER
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 306-6666 Y | [1] | BOX GP-CONTROL | |
| 2. | 307-9166 Y | [1] | WIRING GP-HEATER (LPG) | |
| 3. | 312-5015 Y | [1] | WIRING GP-SCREED (SPARK PLUG, SCREED EXT, LH) | |
| 4. | 312-5016 Y | [1] | WIRING GP-SCREED (SPARK PLUG, MAIN SCREED, RH) | |
| 5. | 312-5017 Y | [1] | WIRING GP-SCREED (SPARK PLUG, MAIN SCREED, LH) | |
| 6. | 312-5019 Y | [1] | WIRING GP-SCREED (SPARK PLUG, SCREED EXT, RH) | |
| 7. | 306-6667 | [4] | SENSOR-TEMPERATURE (LPG HEAT) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 307-9159 | [1] | CABLE AS | |
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370346
339-1651: WIRING GP-HEATER
339-1651 WIRING GP-HEATER -LPG HEAT
S/N MAN1-UP
PART OF 286-3632 WIRING GP-HEATER
AN ATTACHMENT
S/N MAN1-UP
PART OF 286-3632 WIRING GP-HEATER
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 306-6666 Y | [1] | BOX GP-CONTROL | |
| 2. | 312-5015 Y | [1] | WIRING GP-SCREED (SPARK PLUG, SCREED EXT, LH) | |
| 3. | 312-5016 Y | [1] | WIRING GP-SCREED (SPARK PLUG, MAIN SCREED, RH) | |
| 4. | 312-5017 Y | [1] | WIRING GP-SCREED (SPARK PLUG, MAIN SCREED, LH) | |
| 5. | 312-5019 Y | [1] | WIRING GP-SCREED (SPARK PLUG, SCREED EXT, RH) | |
| 6. | 339-1652 Y | [1] | WIRING GP-HEATER (LPG HEAT) | |
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370347
339-1652: WIRING GP-HEATER
339-1652 WIRING GP-HEATER -LPG HEAT
S/N MAN1-UP
PART OF 339-1651 WIRING GP-HEATER
AN ATTACHMENT
S/N MAN1-UP
PART OF 339-1651 WIRING GP-HEATER
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 339-1653 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 3) | |
| 2. | 339-1654 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 4) | |
| 3. | 339-1655 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 1) | |
| 4. | 339-1656 | [1] | HARNESS AS-VALVE (GAS SOLENOID NO. 2) | |
| (EACH HARNESS AS-VALVE INCLUDES) | ||||
| 107-2870 | [1] | CONNECTOR (2-PIN) | ||
| 5. | 232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(76-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#KEBP03370348
297-1002: WIRING GP-HYDRAULIC GENERATOR
297-1002 WIRING GP-HYDRAULIC GENERATOR
S/N MAN1-UP
PART OF 270-6762, 314-7786 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
S/N MAN1-UP
PART OF 270-6762, 314-7786 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(HYDRAULIC GENERATOR) | |
| 2. | 297-1004 | [1] | HARNESS AS-SOLENOID | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-5519 | [1] | PLUG AS-CONNECTOR (5-PIN) | ||
| 180-9339 | [3] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 3. | 130-5300 | [1] | CLIP | |
| 4. | 4P-7428 | [1] | CLIP (LADDER) | |
| 5. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 6. | 7K-1181 | [7] | STRAP-CABLE | |
| 7. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03370349
363-3401: WIRING GP-LIGHTING
363-3401 WIRING GP-LIGHTING -HID LIGHTS, WARNING BEACON
S/N MAN1-UP
AN ATTACHMENT
S/N MAN1-UP
AN ATTACHMENT
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(HID LIGHTS, WARNING BEACON) | |
| 2. | 3S-2093 | [50] | STRAP-CABLE | |
| 3. | 359-6095 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 290-1502 | [1] | PLATE AS | ||
| 4. | 363-3403 | [1] | HARNESS AS-LIGHTING (CANOPY) | |
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RESEPTACLE AS & WEDGE) | ||||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 5. | 363-3956 | [1] | HARNESS AS-LIGHTING (JUMPER) | |
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 6. | 130-5300 | [1] | CLIP | |
| 7. | 4P-7428 | [1] | CLIP (LADDER) | |
| 8. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 9. | 7K-1181 | [3] | STRAP-CABLE | |
| 10. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 12. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 14. | 6P-0699 | [1] | GROMMET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
