ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#KEBP03370350
269-8371: WIRING GP-MACHINE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-0633 Y | [1] | HARNESS AS-ENGINE | |
| 2. | 277-0634 | [1] | HARNESS AS-PUMP | |
| 155-2270 | [14] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 180-9339 | [29] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [28] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 3. | 277-8236 | [1] | HARNESS AS-SOLENOID | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 4. | 7K-1181 | [15] | STRAP-CABLE | |
| 5. | 1S-1015 | [1] | CLIP | |
| 6. | 130-5301 | [5] | CLIP | |
| 7. | 4P-7429 | [2] | CLIP (LADDER) | |
| 8. | 096-6166 | [3] | WASHER-HARD (4.5X9X1-MM THK) | |
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 8T-8737 | [2] | PLUG-SEAL | |
| 11. | 4P-7428 | [3] | CLIP (LADDER) | |
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | |
| 14. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 15. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 16. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 17. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 18. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 24. | 8T-8799 | [1] | BOOT (RED) | |
| 25. | 6V-9672 M | [3] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 26. | 4P-8134 | [3] | CLIP (LADDER) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370351
269-8371: WIRING GP-MACHINE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-0633 Y | [1] | HARNESS AS-ENGINE | |
| 2. | 423-2501 CY | [1] | HARNESS AS-PUMP | |
| 3. | 277-8236 | [1] | HARNESS AS-SOLENOID | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 180-9340 | [4] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 4. | 7K-1181 BC | [9] | STRAP-CABLE | |
| 4A. | 7K-1181 BC | [6] | STRAP-CABLE | |
| 4B. | 7K-1181 BC | [2] | STRAP-CABLE | |
| 5. | 1S-1015 | [1] | CLIP | |
| 6. | 130-5301 C | [1] | CLIP | |
| 7. | 4P-7429 C | [4] | CLIP (LADDER) | |
| 8. | 096-6166 | [3] | WASHER-HARD (4.5X9X1-MM THK) | |
| 9. | 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 10. | 8T-8737 | [2] | PLUG-SEAL | |
| 11. | 4P-7428 | [3] | CLIP (LADDER) | |
| 12. | 130-5300 | [1] | CLIP | |
| 13. | 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | |
| 14. | 9X-0352 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 15. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 16. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 17. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 18. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 19. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 20. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 24. | 8T-8799 | [1] | BOOT (RED) | |
| 25. | 6V-9672 M | [3] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 26. | 4P-8134 | [3] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370352
272-7055: WIRING GP-MACHINE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 272-7056 | [1] | HARNESS AS-CHASSIS (LH) | |
| 7R-7029 | [1] | CONNECTOR-RECEPTACLE (6-PIN) | ||
| 9X-3401 | [36] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [61] | PLUG-SEAL | ||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 180-9340 | [49] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7978 | [2] | TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW) | ||
| 5P-2321 | [3] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 131-1492 | [2] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| (EACH INCLUDES) | ||||
| 3K-4528 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(40-CM) | |||
| 2. | 112-3101 | [2] | PLATE-FACE | |
| 3. | 7K-1181 | [25] | STRAP-CABLE | |
| 4. | 8D-9537 | [1] | CAP-DUST | |
| 5. | 3S-2093 | [24] | STRAP-CABLE | |
| 6. | 130-5300 | [4] | CLIP | |
| 7. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 8. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 9. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 10. | 8N-0694 | [1] | SWITCH AS-TOGGLE (SINGLE POLE)(ENGINE SHUTDOWN) | |
| 11. | 9G-0011 | [1] | SWITCH AS-TOGGLE (LOW FLOW) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 12. | 5D-7635 | [1] | GROMMET | |
| 13. | 9M-8406 | [1] | CLIP (LOOP)(SMALL) | |
| 14. | 156-6175 | [1] | CLIP (LADDER)(LADDER) | |
| 15. | 2N-3480 | [6] | SCREW-MACHINE (10-24X0.75-IN) | |
| 16. | 4B-4274 | [6] | WASHER (5.5X13X1.2-MM THK) | |
| 17. | 4B-2047 | [6] | NUT (10-24-THD) | |
| 18. | 6V-9672 M | [4] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 21. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 23. | 7G-7053 | [3] | GROMMET | |
| 24. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 26. | 116-0118 | [1] | CLIP (SLOT) | |
| 27. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 28. | 9B-1117 | [4] | LOCKWASHER (0.79-MM THK) | |
| 29. | 3C-6969 M | [4] | NUT (M3X0.5-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03370353
272-7057: WIRING GP-MACHINE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 272-7058 | [1] | HARNESS AS-CHASSIS (RH) | |
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-7029 | [1] | CONNECTOR-RECEPTACLE (6-PIN) | ||
| 8T-8737 | [35] | PLUG-SEAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 7N-7978 | [2] | TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW) | ||
| 5P-2321 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 131-1492 | [1] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 2L-8071 | [3] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 9X-3401 | [24] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 180-9340 | [35] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 2. | 112-3101 | [1] | PLATE-FACE | |
| 3. | 7K-1181 | [20] | STRAP-CABLE | |
| 4. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 5. | 3S-2093 | [32] | STRAP-CABLE | |
| 6. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 7. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 8. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 9. | 130-5300 | [5] | CLIP | |
| 10. | 9G-0011 | [1] | SWITCH AS-TOGGLE (FLOW CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 11. | 5D-7635 | [1] | GROMMET | |
| 12. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 14. | 4B-4274 | [3] | WASHER (5.5X13X1.2-MM THK) | |
| 15. | 2N-3480 | [3] | SCREW-MACHINE (10-24X0.75-IN) | |
| 16. | 4B-2047 | [3] | NUT (10-24-THD) | |
| 17. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 18. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 19. | 6V-9672 M | [4] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 20. | 7G-7053 | [3] | GROMMET | |
| 21. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 22. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 116-0118 | [1] | CLIP (SLOT) | |
| 24. | 9R-5383 | [1] | BOSS | |
| 25. | 220-0230 | [1] | ALARM AS (BACKUP) | |
| 9X-1813 E | SLEEVE (29-CM) | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5623 D | WIRE-ELECTRICAL (16-GA, BLACK)(0.8-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 26. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 27. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 28. | 9B-1117 | [4] | LOCKWASHER | |
| 29. | 3C-6969 M | [4] | NUT (M3X0.5-THD) | |
| 30. | 8D-9537 | [1] | CAP-DUST | |
| 31. | 156-6175 | [1] | CLIP (LADDER) | |
| 32. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 33. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03370354
272-7059: WIRING GP-MACHINE
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 339-2593 | [1] | HARNESS AS-REAR CHASSIS | |
| 9X-3401 | [59] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [59] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-7143 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 180-9340 | [25] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 2. | 7K-1181 | [14] | STRAP-CABLE | |
| 3. | 6V-9672 M | [7] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 4. | 096-6166 | [7] | WASHER-HARD (4.5X9X1-MM THK) | |
| 5. | 5C-8312 M | [7] | NUT (M4X0.7-THD) | |
| 6. | 283-8045 | [1] | PLATE AS | |
| 7. | 132-5789 | [2] | CLIP (LADDER) | |
| 8. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 9. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 10. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 11. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 235-3518 | [1] | PLATE | |
| 13. | 134-2540 | [1] | RESISTOR AS-CONNECTION (3-PIN) | |
| 14. | 130-5300 | [2] | CLIP | |
| 15. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 8T-8737 | [3] | PLUG-SEAL | |
| 17. | 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#KEBP03370355
299-5205: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 246-8370 | [1] | GROMMET | |
| 3. | 254-5092 | [1] | CIRCUIT BREAKER AS (25-AMPERE)(ALTERNATOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 4. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 5. | 299-5202 | [1] | CABLE AS | |
| 6. | 300-9957 | [1] | HARNESS AS-SWITCH | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 180-9339 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7. | 301-0070 | [2] | RECEPTACLE | |
| 8. | 301-0072 | [1] | ENCLOSURE GP-ELECTRICAL | |
| 9. | 301-0073 | [1] | BRACKET | |
| 10. | 301-0074 | [1] | PLATE | |
| 11. | 310-8549 | [2] | HARNESS AS-WIRING | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 180-9339 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 12. | 3B-4501 | [4] | LOCKWASHER | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE | |
| 14. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 15. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 16. | 7I-2273 M | [4] | BOLT (M5X0.8X16-MM) | |
| 17. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 18. | 7K-1181 | [4] | STRAP-CABLE | |
| 19. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 20. | 8P-8540 | [1] | GROMMET | |
| 21. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 22. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 23. | 9G-4191 | [1] | GROMMET | |
| M | METRIC PART | |||
#KEBP03370356
299-5205: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 246-8370 | [1] | GROMMET | |
| 3. | 362-6644 C | [1] | CIRCUIT BREAKER AS (25-AMPERE)(ALTERNATOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 4. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 5. | 377-3835 CY | [1] | HARNESS AS-SWITCH | |
| 6. | 300-9957 | [1] | HARNESS AS-SWITCH (GOVERNOR CONTROL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 301-0070 | [2] | RECEPTACLE | |
| 8. | 301-0072 | [1] | ENCLOSURE GP-ELECTRICAL | |
| 380-2611 | [1] | COVER | ||
| 380-2612 | [1] | LATCH | ||
| 380-2613 | [1] | SEAL | ||
| 9. | 301-0073 | [1] | BRACKET | |
| 10. | 301-0074 | [1] | PLATE | |
| 12. | 3B-4501 | [4] | LOCKWASHER | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (HOLD FREQUENCY) | |
| 14. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 15. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 16. | 7I-2273 M | [4] | BOLT (M5X0.8X16-MM) | |
| 17. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 18. | 7K-1181 C | [2] | STRAP-CABLE | |
| 19. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 20. | 8P-8540 | [1] | GROMMET | |
| 21. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 22. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 23. | 9G-4191 | [1] | GROMMET | |
| 24. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370357
299-5205: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 246-8370 | [1] | GROMMET | |
| 3. | 362-6644 | [1] | CIRCUIT BREAKER AS (25-AMPERE)(ALTERNATOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 4. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 5. | 418-2325 CY | [1] | HARNESS AS-SWITCH | |
| 6. | 300-9957 | [1] | HARNESS AS-SWITCH (GOVERNOR CONTROL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 7. | 301-0070 | [2] | RECEPTACLE | |
| 8. | 301-0072 | [1] | ENCLOSURE GP-ELECTRICAL | |
| 380-2611 | [1] | COVER | ||
| 380-2612 | [1] | LATCH | ||
| 380-2613 | [1] | SEAL | ||
| 9. | 301-0073 | [1] | BRACKET | |
| 10. | 301-0074 | [1] | PLATE | |
| 12. | 3B-4501 | [4] | LOCKWASHER | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (HOLD FREQUENCY) | |
| 14. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 15. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 16. | 7I-2273 M | [4] | BOLT (M5X0.8X16-MM) | |
| 17. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 19. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 20. | 8P-8540 | [1] | GROMMET | |
| 21. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 22. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 23. | 9G-4191 | [1] | GROMMET | |
| 24. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 25. | 3S-2093 C | [9] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370358
311-3004: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 246-8370 | [1] | GROMMET | |
| 3. | 254-5092 | [1] | CIRCUIT BREAKER AS (25-AMPERE)(ALTERNATOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 4. | 260-2915 | [2] | RECEPTACLE AS-CONNECTOR | |
| 5. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 6. | 300-9957 | [1] | HARNESS AS-SWITCH (TOGGLE) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 7. | 301-0072 | [1] | ENCLOSURE GP-ELECTRICAL | |
| 8. | 301-0073 | [1] | BRACKET | |
| 9. | 301-0074 | [1] | PLATE | |
| 10. | 311-2995 Y | [1] | HARNESS AS-POWER | |
| 11. | 1S-1015 | [2] | CLIP | |
| 12. | 3B-4501 | [4] | LOCKWASHER | |
| 13. | 4D-1836 | [1] | SWITCH-TOGGLE (HOLD FREQUENCY) | |
| 14. | 4P-8134 | [2] | CLIP (LADDER) | |
| 15. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 16. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 17. | 6V-4298 M | [4] | BOLT (M5X0.8X16-MM) | |
| 18. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 19. | 7K-1181 | [7] | STRAP-CABLE | |
| 20. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 21. | 8P-8540 | [1] | GROMMET | |
| 22. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 25. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 26. | 9G-4191 | [1] | GROMMET | |
| 27. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03370359
312-1754: WIRING GP-PANEL
For full view, you need register
Parts for your AP-655D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 2. | 246-8370 | [1] | GROMMET | |
| 3. | 254-5092 | [1] | CIRCUIT BREAKER AS (25-AMPERE)(ALTERNATOR) | |
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 4. | 286-7243 | [1] | FILM-INSTRUCTION (HOLD FREQUENCY, READ OMM) | |
| 5. | 300-9957 | [1] | HARNESS AS-SWITCH (TOGGLE) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-2321 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW) | ||
| 6. | 301-0070 | [2] | RECEPTACLE | |
| 7. | 301-0072 | [1] | ENCLOSURE GP-ELECTRICAL | |
| 8. | 301-0073 | [1] | BRACKET | |
| 9. | 301-0074 | [1] | PLATE | |
| 10. | 310-8549 | [2] | HARNESS AS-WIRING | |
| 11. | 311-2995 Y | [1] | HARNESS AS-POWER | |
| 12. | 1S-1015 | [2] | CLIP | |
| 13. | 3B-4501 | [4] | LOCKWASHER | |
| 14. | 4D-1836 | [1] | SWITCH-TOGGLE (HOLD FREQUENCY) | |
| 15. | 4P-8134 | [2] | CLIP (LADDER) | |
| 16. | 5C-2874 M | [4] | NUT (M5X0.8-THD) | |
| 17. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 18. | 6V-4298 M | [4] | BOLT (M5X0.8X16-MM) | |
| 19. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 20. | 7K-1181 | [7] | STRAP-CABLE | |
| 21. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 22. | 8P-8540 | [1] | GROMMET | |
| 23. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 24. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 26. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 27. | 9G-4191 | [1] | GROMMET | |
| 28. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
