AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

276-4539 SCREED AR -AS3251C, U.S. AS3251C ASPHALT SCREED


MACHINE ARRANGEMENT
SCREED AR
CONTROLS
ADJUSTER GP
CROWN GP
CONTROL GP-THICKNESS

ASPHALT SCREED AS3251C ASPHALT SCREED JJN
 AS3251C Screed JJN00001-UP KEBP0340 AS3251C JJN   (2007)

MACHINE ARRANGEMENT

SCREED AR
276-4539 SCREED AR
488-3823 KIT-SCREED PLATE
 

#KEBP03400001
 

276-4539: SCREED AR

276-4539 SCREED AR -AS3251C, U.S.
i02683523 KEBP0340
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  276-4579 Y [1] ADJUSTER GP-HEIGHT  
  276-4589 Y [1] ARM GP-DROP  
  276-4590 Y [1] CROWN GP-POWER  
  276-4582 Y [1] DEFLECTOR GP  
  276-4604 Y [1] FRAME GP-SCREED  
  276-4603 Y [1] GATE GP-END  
  276-4585 Y [1] LINES GP-EXTENSION  
  276-4584 Y [1] LINES GP-VIBRATORY  
  Y [1] PLATE & FILM GP  
  276-4605 Y [1] PLATE & HEATER GP-SCREED (ELECTRIC HEAT)  
  276-4588 Y [1] PLATFORM GP-OPERATOR  
  276-4573 Y [1] SLOPER GP-POWER  
  276-4572 Y [1] VIBRATORY GP  
  276-4607 Y [1] WIRING GP-HEATER  
  276-4606 Y [1] WIRING GP-SCREED  
  Y   SEPARATE ILLUSTRATION
 

#KEBP03400002
 

102-2703: ADJUSTER GP-HEIGHT

102-2703 ADJUSTER GP-HEIGHT -MANUAL
PART OF 276-4579 ADJUSTER GP-HEIGHT
i00465645 KEBP0340
1022703 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7L-8316 [2] SETSCREW-SOCKET (10-32X2.54-IN)  
2. 163-5736 [1] SCREW-LIFTING  
3. 107-0247 [1] GEAR-WORM  
4. 3P-8680 [2] CUP-BEARING  
5. 187-5527 [1] HOUSING  
6. 107-0250 [1] GUIDE-BUSHING  
7. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
8. 163-5737 [1] PIPE  
9. 2D-6398 [2] RING-RETAINING  
10. 8L-4070 [2] BALL BEARING  
11. 7T-9831 [2] CONE-BEARING  
12. 112-2181 [1] WORM  
13. 142-6282 [1] CAP  
   
  8T-5069 F [4] SETSCREW-SOCKET (10-24X0.25-IN)  
  F   NOT SHOWN
 

#KEBP03400003
 

276-4579: ADJUSTER GP-HEIGHT

276-4579 ADJUSTER GP-HEIGHT
S/N JJN1-113
PART OF 276-4539 SCREED AR
i02683520 KEBP0340
2764579 ADJUSTER GP-HEIGHT Parts scheme 2764579 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0267 [4] CAP  
2. 8I-0272 [2] POINTER  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
5. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
6. 102-2704 [2] BOLT-SPECIAL  
7. 102-2724 [4] TUBE AS (VERTICAL)  
8. 102-2733 [2] CLEVIS  
9. 102-2739 [2] KEY-SQUARE  
10. 253-8866 [8] PIN-SPRING  
11. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
12. 277-2006 Y [2] MOTOR GP-POWER ADJUSTER  
13. 279-4230 [2] FILM-IDENTIFICATION (HEIGHT SCALE)  
14. 284-9589 [1] PLATE AS (RH)(RH)  
15. 284-9590 [1] PLATE AS (LH)(LH)  
16. 287-8869 [1] FRAME AS (RH)(RH)  
  8I-0256 [4] BUSHING  
  198-1083 B ADHESIVE  
17. 287-8870 [1] FRAME AS (LH)(LH)  
  8I-0256 [4] BUSHING  
  198-1083 B ADHESIVE  
18. 4L-6454 [4] BOLT (3/8-16X1-IN)  
19. 5J-3941 [8] PIN-SPRING  
20. 6V-8189 [2] NUT (5/16-18-THD)  
21. 8I-0736 [2] SUPPORT AS-MOTOR  
22. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
24. 8T-4132 M [2] NUT (M16X2-THD)  
25. 8T-4133 M [4] NUT (M10X1.5-THD)  
26. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
27. 8T-4140 M [2] BOLT (M16X2X60-MM)  
28. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
29. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
30. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4779 M [18] BOLT (M16X2X35-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03400004
 

276-4579: ADJUSTER GP-HEIGHT

276-4579 ADJUSTER GP-HEIGHT
S/N JJN114-360
PART OF 276-4539 SCREED AR
i02913039 KEBP0340
2764579 ADJUSTER GP-HEIGHT Parts scheme 2764579 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0267 [4] CAP  
2. 8I-0272 [2] POINTER  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
5. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
6. 102-2704 [2] BOLT-SPECIAL  
7. 354-6744 [4] TUBE AS  
8. 102-2733 [2] CLEVIS  
9. 102-2739 [2] KEY-SQUARE  
10. 253-8866 [8] PIN-SPRING  
11. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
12. 277-2006 Y [2] MOTOR GP-POWER ADJUSTER  
13. 107-6186 C [2] GAUGE (EXTENDER)  
14. 284-9589 [1] PLATE AS (RH)  
15. 284-9590 [1] PLATE AS (LH)  
16. 287-8869 [1] FRAME AS (RH)  
17. 287-8870 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  8I-0256 [4] BUSHING  
18. 4L-6454 [4] BOLT (3/8-16X1-IN)  
19. 5J-3941 [8] PIN-SPRING  
20. 6V-8189 [2] NUT (5/16-18-THD)  
21. 8I-0736 [2] SUPPORT AS-MOTOR  
22. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
24. 8T-4132 M [2] NUT (M16X2-THD)  
25. 8T-4133 M [4] NUT (M10X1.5-THD)  
26. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
27. 8T-4140 M [2] BOLT (M16X2X60-MM)  
28. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
29. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
30. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4779 M [18] BOLT (M16X2X35-MM)  
32. 9S-2544 C [4] SCREW-HEX HEAD (8-32X11.13-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03400005
 

276-4579: ADJUSTER GP-HEIGHT

276-4579 ADJUSTER GP-HEIGHT
S/N JJN361-UP
PART OF 276-4539 SCREED AR
i04194769 KEBP0340
2764579 ADJUSTER GP-HEIGHT Parts scheme 2764579 ADJUSTER GP-HEIGHT Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8I-0267 [4] CAP  
2. 8I-0272 [2] POINTER  
3. 8I-0273 [2] PLATE-BOTTOM  
4. 8I-0740 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
5. 102-2703 Y [2] ADJUSTER GP-HEIGHT (MANUAL)  
6. 102-2704 [2] BOLT-SPECIAL  
7. 354-6744 [4] TUBE AS  
8. 102-2733 [2] CLEVIS  
9. 102-2739 [2] KEY-SQUARE  
10. 253-8866 [8] PIN-SPRING  
11. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
12. 277-2006 Y [2] MOTOR GP-POWER ADJUSTER  
13. 279-4230 C [2] FILM-IDENTIFICATION (HEIGHT SCALE)  
14. 284-9589 [1] PLATE AS (RH)  
15. 284-9590 [1] PLATE AS (LH)  
16. 287-8869 [1] FRAME AS (RH)  
17. 287-8870 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  8I-0256 [4] BUSHING  
18. 4L-6454 [4] BOLT (3/8-16X1-IN)  
19. 5J-3941 [8] PIN-SPRING  
20. 6V-8189 [2] NUT (5/16-18-THD)  
21. 8I-0736 [2] SUPPORT AS-MOTOR  
22. 8T-4121 [22] WASHER-HARD (11X21X2.5-MM THK)  
23. 8T-4122 [18] WASHER-HARD (17X32X3.5-MM THK)  
24. 8T-4132 M [2] NUT (M16X2-THD)  
25. 8T-4133 M [4] NUT (M10X1.5-THD)  
26. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
27. 8T-4140 M [2] BOLT (M16X2X60-MM)  
28. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
29. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
30. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4779 M [18] BOLT (M16X2X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03400006
 

197-9844: CHAIN GP-SCREED

197-9844 CHAIN GP-SCREED
PART OF 276-4590 CROWN GP-POWER
i01489835 KEBP0340
1979844 CHAIN GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-2687 [1] LINK-CONNECTING  
2. 195-9533 [1] LINK-OFFSET  
 

#KEBP03400007
 

277-9934: CONTROL GP-THICKNESS

277-9934 CONTROL GP-THICKNESS -LH THREAD
AN ATTACHMENT
i02683645 KEBP0340
2779934 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-3184 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
2. 292-5065 [2] TRUNNION  
3. 280-1690 [2] SHAFT AS  
 

#KEBP03400008
 

277-9935: CONTROL GP-THICKNESS

277-9935 CONTROL GP-THICKNESS -RH THREAD
AN ATTACHMENT
i02683644 KEBP0340
2779935 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-3183 [2] FILM-INSTRUCTION (MAT THICKNESS, CCW TO INCREASE)  
2. 280-1694 [2] SHAFT AS  
3. 301-2272 [2] TRUNNION  
 

#KEBP03400009
 

287-0326: CONTROL GP-THICKNESS

287-0326 CONTROL GP-THICKNESS -LH THREAD
AN ATTACHMENT
i02683635 KEBP0340
2870326 CONTROL GP-THICKNESS Parts scheme
  For full view, you need register

Parts for your AS3251C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 277-3184 [2] FILM-INSTRUCTION (MAT THICKNESS, CW TO INCREASE)  
2. 289-0226 [2] SHAFT AS  
3. 301-2273 [2] TRUNNION  
 

Information:

Special Instruction
Procedure to Waterproof Temperature Sensors on Certain Asphalt Screeds{1408, 5639, 6640}
Procedure to Waterproof Temperature Sensors on Certain Asphalt Screeds{1408, 5639, 6640}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
General Information
AS3251C Asphalt Screed
Screed Components
AS3251C Asphalt Screed
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
Testing and Adjusting
Screed Troubleshooting
AS3251C Asphalt Screed
Angle of Attack - Check and Adjust
AS3251C Asphalt Screed
Deflector - Check and Adjust
AS3251C Asphalt Screed
Machine Preparation for Troubleshooting
AS3251C Asphalt Screed
Visual Inspection
AS3251C Asphalt Screed
Screed Plate - Check and Adjust - Main Screed Plate
AS3251C Asphalt Screed
Extender - Check and Adjust - Extender Plates
AS3251C Asphalt Screed
Disassembly and Assembly
Screed - Remove and Install
AS3251C Asphalt Paver
Screed Plate (Main) - Remove and Install
AS3251C Asphalt Paver
Screed Plate (Extender) - Remove and Install
AS3251C Asphalt Paver
Service Magazine
A New Procedure is Available to Test the Electrical System on Asphalt Screeds {1408, 6643, 664E}
2008/05/12
A New Procedure is Available to Waterproof the Temperature Sensors on Certain Asphalt Screeds {1408, 5639, 6640}
2008/07/21

Caterpillar Parts SIS Catalog AS3251C :

ADJUSTER GP-HEIGHT
102-2703 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
276-4579 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
276-4579 ADJUSTER GP-HEIGHT
ADJUSTER GP-HEIGHT
276-4579 ADJUSTER GP-HEIGHT
CHAIN GP-SCREED
197-9844 CHAIN GP-SCREED
CONTROL GP-THICKNESS
277-9934 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
277-9935 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
287-0326 CONTROL GP-THICKNESS

Truck sale:

2015 CAT AS3251C
USD $12,500 
2015 CAT AS3251C

Brown Equipment Co.
Ocala, Florida
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.