AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

306-7603 WIRING GP-PANEL PART OF 293-6541 WIRING GP-HEATER AS2252C ASPHALT SCREED


ELECTRICAL AND STARTING SYSTEM
WIRING GP
HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-SCREED
LINES GP

ASPHALT SCREED AS2252C ASPHALT SCREED TDS
 AS2252C Screed TDS00001-UP KEBP0346 AS2252C TDS   (2007)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-HEATER
293-6541 WIRING GP-HEATER
WIRING GP-HEATER
293-6541 WIRING GP-HEATER
WIRING GP-PANEL
306-7603 WIRING GP-PANEL
WIRING GP-SCREED
276-4552 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
 

#KEBP03460030
 

306-7603: WIRING GP-PANEL

306-7603 WIRING GP-PANEL
PART OF 293-6541 WIRING GP-HEATER
i02730689 KEBP0346
3067603 WIRING GP-PANEL Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 255-5011 [1] RELAY AS (24-VOLT)(EXTENDER, LH)  
2A. 255-5011 [1] RELAY AS (24-VOLT)(MAIN, LH)  
2B. 255-5011 [1] RELAY AS (24-VOLT)(EXTENDER, RH)  
2C. 255-5011 [1] RELAY AS (24-VOLT)(MAIN, RH)  
3. 276-4612 [1] PLATE AS  
4. 276-4616 [1] HARNESS AS-PANEL  
  103-8133 KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-2321 [12] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  8T-8737 [5] PLUG-SEAL  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
5. 306-7604 [1] HARNESS AS-SCREED  
  177-9648 [2] KIT-CONNECTING PLUG (2-PIN)  
  177-9656 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  177-9653 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  7T-0093 [8] PIN-CONNECTOR (12-GA TO 14-GA)  
  7T-0094 [10] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8T-8737 [2] PLUG-SEAL  
  5P-1478 [10] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
6. 096-6166 [12] WASHER-HARD (4.5X9X1-MM THK)  
7. 8C-7581 M [12] SCREW-MACHINE (M4X0.7X8-MM)  
8. 8T-4171 M [2] BOLT (M6X1X12-MM)  
9. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#KEBP03460031
 

276-4552: WIRING GP-SCREED

276-4552 WIRING GP-SCREED -EXTENSION
PART OF 293-6625 WIRING GP-SCREED
i02683651 KEBP0346
2764552 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 276-4542 [1] FILM-IDENTIFICATION (SCREED EXTENSION)  
2. 276-4553 [1] HARNESS AS-SWITCH (SCREED)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  7N-7978 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 6 SCREW)  
  5P-2321 [8] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
3. 276-4556 [1] PLATE  
4. 246-8912 [1] SWITCH GP-TOGGLE (EXTENDER CONTROL, RH)  
4A. 246-8912 [1] SWITCH GP-TOGGLE (FEEDER CONTROL)  
4B. 246-8912 [1] SWITCH GP-TOGGLE (TOW POINT CONTROL, RH)  
    (EACH SWITCH AS INCLUDES)
  3L-8187 [3] LOCKWASHER  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6V-8374 [3] SCREW-MACHINE (6-32X0.25-IN)  
5. 265-9984 [1] BRACKET  
 

#KEBP03460032
 

293-6625: WIRING GP-SCREED

293-6625 WIRING GP-SCREED
S/N TDS1-107
PART OF 294-0947 SCREED AR
i02793179 KEBP0346
2936625 WIRING GP-SCREED Parts scheme 2936625 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6113 [2] LOCKNUT (3/4-IN)  
2. 1G-9959 [2] CLAMP  
3. 3S-2093 [32] STRAP-CABLE  
4. 7E-3066 [2] ELBOW-PULLING  
5. 7V-5626 [2] CLAMP  
6. 7V-5628 [3] PLATE  
7. 7V-6089 [2] CLAMP  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8T-9658 [4] SPACER (8.2X12.7X25.4-MM THK)  
10. 138-4572 [4] COVER  
11. 143-2923 [2] PLATE  
12. 143-4829 [2] CONNECTOR  
13. 143-9644 [2] PLATE-RETAINER  
14. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
15. 169-5414 [4] CLIP  
16. 177-2215 [2] STRAP-DUAL CLAMP  
17. 206-1511 [4] CLAMP-HALF  
18. 229-3138 [2] SENSOR GP-TEMPERATURE (SCREED HEAT)  
    (EACH INCLUDES)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (57-CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 231-4680 [2] FITTING  
20. 9X-8486 [12] SCREW-MACHINE (8-32X0.75-IN)  
21. 252-2422 [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
22. 257-4380 [1] HARNESS AS-SCREED (PAVER TO SCREED)  
  9X-7144 [2] PLUG AS-CONNECTOR (24-PIN)  
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
23. 276-4552 Y [2] WIRING GP-SCREED (EXTENSION)  
24. 276-4615 [2] COVER  
25. 279-3556 [2] BOX AS  
26. 294-1084 [2] HARNESS AS-SCREED (EXTENDER)  
    (EACH INCLUDES)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2259 [1] WEDGE-PLUG LOCK (8-PIN)  
  8T-8737 [9] PLUG-SEAL  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  135-5010 E TUBE-HEAT SHRINK (52-MM DIA)(20-CM)  
  160-2244 G SLEEVE-ABRASION (46-IN)  
27. 319-9567 [1] HARNESS AS-CHASSIS  
  155-2255 [4] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [18] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-7144 [2] PLUG AS-CONNECTOR (24-PIN)  
    (EACH INCLUDES)
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
  155-2258 [5] WEDGE-PLUG LOCK (12-PIN)  
  9X-3401 [14] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [14] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [137] PLUG-SEAL  
  9X-6772 [4] STRAP-CABLE  
  9X-7143 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1774 [2] COVER-CONNECTOR  
  9G-4344 [1] TERMINAL-RING (4-GA, 1/2-IN SCREW)  
  9X-1813 E SLEEVE (207-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(46-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)  
  135-5010 E TUBE-HEAT SHRINK (52-MM DIA)(20-CM)  
  160-2246 G SLEEVE-ABRASION (30-IN)  
28. 294-6003 [1] PLATE  
29. 294-8231 Y [1] BOX GP-SCREED CONTROL (RH)  
30. 294-8232 Y [1] BOX GP-SCREED CONTROL (LH)  
31. 296-1288 Y [1] ELECTRONICS GP-IMPLEMENT  
32. 061-8844 [2] GROMMET  
33. 130-5300 [7] CLIP  
34. 209-3118 [8] CLAMP-HALF  
35. 3H-0240 [24] WASHER (5X9.7X0.8-MM THK)  
36. 7K-1181 [17] STRAP-CABLE  
37. 4S-4455 [1] CLIP  
38. 5D-7635 [2] GROMMET  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
42. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 6D-5801 [12] LOCKNUT (8-32-THD)  
44. 6V-8188 [1] NUT (1/2-13-THD)  
45. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
46. 7X-7729 [6] WASHER (11X25X3-MM THK)  
47. 8C-8451 M [6] BOLT (M6X1X40-MM)  
48. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [4] NUT (M10X1.5-THD)  
50. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
51. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
52. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
53. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-8912 [4] BOLT (5/16-18X2.25-IN)  
55. 8T-9364 [4] BOLT (1/4-20X0.625-IN)  
56. 8T-9371 [5] BOLT (3/8-16X0.5-IN)  
57. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03460033
 

293-6625: WIRING GP-SCREED

293-6625 WIRING GP-SCREED
S/N TDS108-176
PART OF 294-0947 SCREED AR
i02998620 KEBP0346
2936625 WIRING GP-SCREED Parts scheme 2936625 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-9153 CY [2] SENSOR GP-TEMPERATURE (SCREED HEAT)  
2. 1G-9959 [2] CLAMP  
3. 3S-2093 [32] STRAP-CABLE  
4. 8T-9364 [4] BOLT (1/4-20X0.625-IN)  
5. 7V-5626 [2] CLAMP  
6. 7V-5628 [3] PLATE  
7. 7V-6089 [2] CLAMP  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8T-9658 [4] SPACER (8.2X12.7X25.4-MM THK)  
10. 138-4572 [4] COVER  
11. 143-2923 [2] PLATE  
12. 8T-9371 [5] BOLT (3/8-16X0.5-IN)  
13. 143-9644 [2] PLATE-RETAINER  
14. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
15. 169-5414 [4] CLIP  
16. 177-2215 [2] STRAP-DUAL CLAMP  
17. 206-1511 [4] CLAMP-HALF  
18. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
19. 9X-8486 [12] SCREW-MACHINE (8-32X0.75-IN)  
20. 7K-1181 [17] STRAP-CABLE  
21. 304-5691 C [1] CONTROL GP-UNPROGRAMMED (IMPLEMENT)  
22. 257-4380 [1] HARNESS AS-SCREED (PAVER TO SCREED)  
  9X-7144 [2] PLUG AS-CONNECTOR (24-PIN)  
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
23. 276-4552 Y [2] WIRING GP-SCREED (EXTENSION)  
24. 276-4615 [2] COVER  
25. 279-3556 [2] BOX AS  
26. 294-1084 [2] HARNESS AS-SCREED (EXTENDER)  
    (EACH INCLUDES)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2259 [1] WEDGE-PLUG LOCK (8-PIN)  
  8T-8737 [9] PLUG-SEAL  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  135-5010 E TUBE-HEAT SHRINK (52-MM DIA)(20-CM)  
  160-2244 G SLEEVE-ABRASION (46-IN)  
27. 319-9567 [1] HARNESS AS-CHASSIS  
  155-2255 [4] KIT-CONNECTING PLUG (12-PIN)  
  155-2256 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [18] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-7144 [2] PLUG AS-CONNECTOR (24-PIN)  
    (EACH INCLUDES)
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
  155-2258 [5] WEDGE-PLUG LOCK (12-PIN)  
  9X-3401 [14] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [14] PIN-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [137] PLUG-SEAL  
  9X-6772 [4] STRAP-CABLE  
  9X-7143 [1] RECEPTACLE AS-CONNECTOR (24-PIN)  
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1774 [2] COVER-CONNECTOR  
  9G-4344 [1] TERMINAL-RING (4-GA, 1/2-IN SCREW)  
  9X-1813 E SLEEVE (207-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(46-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM)  
  135-5010 E TUBE-HEAT SHRINK (52-MM DIA)(20-CM)  
  160-2246 G SLEEVE-ABRASION (30-IN)  
28. 294-6003 [1] PLATE  
29. 294-8231 Y [1] BOX GP-SCREED CONTROL (RH)  
30. 294-8232 Y [1] BOX GP-SCREED CONTROL (LH)  
31. 296-1288 Y [1] ELECTRONICS GP-IMPLEMENT  
32. 061-8844 [2] GROMMET  
33. 130-5300 [7] CLIP  
34. 209-3118 [8] CLAMP-HALF  
35. 3H-0240 [24] WASHER (5X9.7X0.8-MM THK)  
36. 236-5149 [4] WASHER-NYLON (11.17X19.05X1.6MM THK)  
37. 4S-4455 [1] CLIP  
38. 5D-7635 [2] GROMMET  
39. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
40. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
42. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 6D-5801 [12] LOCKNUT (8-32-THD)  
44. 6V-8188 [1] NUT (1/2-13-THD)  
45. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
46. 7X-7729 [6] WASHER (11X25X3-MM THK)  
47. 8C-8451 M [6] BOLT (M6X1X40-MM)  
48. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [4] NUT (M10X1.5-THD)  
50. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
51. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
52. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
53. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-8912 [4] BOLT (5/16-18X2.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03460034
 

293-6625: WIRING GP-SCREED

293-6625 WIRING GP-SCREED
S/N TDS177-276
PART OF 294-0947 SCREED AR
i03983973 KEBP0346
2936625 WIRING GP-SCREED Parts scheme 2936625 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-9153 Y [2] SENSOR GP-TEMPERATURE (SCREED HEAT)  
2. 1G-9959 [2] CLAMP  
3. 3S-2093 [32] STRAP-CABLE  
4. 8T-9364 [4] BOLT (1/4-20X0.625-IN)  
5. 7V-5626 [2] CLAMP  
6. 7V-5628 [3] PLATE  
7. 7V-6089 [2] CLAMP  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8T-9658 [4] SPACER (8.2X12.7X25.4-MM THK)  
10. 138-4572 [4] COVER  
11. 143-2923 [2] PLATE  
12. 8T-9371 [5] BOLT (3/8-16X0.5-IN)  
13. 143-9644 [2] PLATE-RETAINER  
14. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
15. 169-5414 [4] CLIP  
16. 177-2215 [2] STRAP-DUAL CLAMP  
17. 206-1511 [4] CLAMP-HALF  
18. 9X-2045 M [12] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 9X-8486 [8] SCREW-MACHINE (8-32X0.75-IN)  
20. 7K-1181 [17] STRAP-CABLE  
21. 304-5687 C [1] CONTROL GP-UNPROGRAMMED  
22. 257-4380 Y [1] HARNESS AS-SCREED (PAVER TO SCREED)  
23. 276-4552 Y [2] WIRING GP-SCREED (EXTENSION)  
24. 276-4615 [2] COVER  
25. 279-3556 [2] BOX AS  
26. 294-1084 Y [2] HARNESS AS-SCREED (EXTENDER)  
27. 341-1404 CY [1] HARNESS AS-SCREED (MAIN)  
28. 294-6003 [1] PLATE  
29. 294-8231 Y [1] BOX GP-SCREED CONTROL (RH)  
30. 294-8232 Y [1] BOX GP-SCREED CONTROL (LH)  
31. 351-5775 CY [1] ELECTRONICS GP-IMPLEMENT  
32. 061-8844 [2] GROMMET  
33. 130-5300 [7] CLIP  
34. 209-3118 [8] CLAMP-HALF  
35. 3H-0240 [16] WASHER (5X9.7X0.8-MM THK)  
36. 236-5149 [4] WASHER-NYLON (11.17X19.05X1.6MM THK)  
37. 4S-4455 [1] CLIP  
38. 5D-7635 [2] GROMMET  
39. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
40. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
42. 352-0244 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 6D-5801 [8] LOCKNUT (8-32-THD)  
44. 6V-8188 [1] NUT (1/2-13-THD)  
45. 297-1003 M [4] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
46. 7X-7729 [8] WASHER (11X25X3-MM THK)  
47. 8C-8451 M [6] BOLT (M6X1X40-MM)  
48. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [5] NUT (M10X1.5-THD)  
50. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
51. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
52. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
53. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-8912 [4] BOLT (5/16-18X2.25-IN)  
55. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
56. 4D-7388 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03460035
 

293-6625: WIRING GP-SCREED

293-6625 WIRING GP-SCREED
S/N TDS277-UP
PART OF 294-0947 SCREED AR
i05590950 KEBP0346
2936625 WIRING GP-SCREED Parts scheme 2936625 WIRING GP-SCREED Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 322-9153 Y [2] SENSOR GP-TEMPERATURE (SCREED HEAT)  
2. 1G-9959 [2] CLAMP  
3. 3S-2093 [32] STRAP-CABLE  
4. 8T-9364 [4] BOLT (1/4-20X0.625-IN)  
5. 7V-5626 [2] CLAMP  
6. 7V-5628 [3] PLATE  
7. 7V-6089 [2] CLAMP  
8. 8T-9655 [8] MOUNT-ISOLATION  
9. 8T-9658 [4] SPACER (8.2X12.7X25.4-MM THK)  
10. 138-4572 [4] COVER  
11. 143-2923 [2] PLATE  
12. 8T-9371 [5] BOLT (3/8-16X0.5-IN)  
13. 143-9644 [2] PLATE-RETAINER  
14. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
15. 169-5414 [4] CLIP  
16. 177-2215 [2] STRAP-DUAL CLAMP  
17. 206-1511 [4] CLAMP-HALF  
18. 9X-2045 M [12] SCREW-TRUSS HEAD (M6X1X20-MM)  
19. 9X-8486 [8] SCREW-MACHINE (8-32X0.75-IN)  
20. 7K-1181 [17] STRAP-CABLE  
21. 304-5687 [1] CONTROL GP-UNPROGRAMMED  
22. 257-4380 Y [1] HARNESS AS-SCREED (PAVER TO SCREED)  
23. 276-4552 Y [2] WIRING GP-SCREED (EXTENSION)  
24. 276-4615 [2] COVER  
25. 279-3556 [2] BOX AS  
26. 294-1084 Y [2] HARNESS AS-SCREED (EXTENDER)  
27. 433-6924 CY [1] HARNESS AS-SCREED (MAIN)  
28. 294-6003 [1] PLATE  
29. 294-8231 Y [1] BOX GP-SCREED CONTROL (RH)  
30. 294-8232 Y [1] BOX GP-SCREED CONTROL (LH)  
31. 351-5775 Y [1] ELECTRONICS GP-IMPLEMENT  
32. 061-8844 [2] GROMMET  
33. 130-5300 [7] CLIP  
34. 209-3118 [8] CLAMP-HALF  
35. 8T-0328 C [16] WASHER-HARD (5.5X10X1-MM THK)  
36. 236-5149 [4] WASHER-NYLON (11.17X19.05X1.6MM THK)  
37. 4S-4455 [1] CLIP  
38. 5D-7635 [2] GROMMET  
39. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
40. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
41. 5P-2675 [4] BOLT (1/4-20X1.75-IN)  
42. 5P-4116 C [5] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 6D-5801 [8] LOCKNUT (8-32-THD)  
44. 6V-8188 [1] NUT (1/2-13-THD)  
45. 297-1003 M [4] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
46. 7X-7729 [8] WASHER (11X25X3-MM THK)  
47. 8C-8451 M [6] BOLT (M6X1X40-MM)  
48. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4133 M [5] NUT (M10X1.5-THD)  
50. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
51. 8T-4195 M [5] BOLT (M10X1.5X30-MM)  
52. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
53. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
54. 8T-8912 [4] BOLT (5/16-18X2.25-IN)  
55. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
56. 4D-7388 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP03460036
 

197-9766: CYLINDER GP-HYDRAULIC

197-9766 CYLINDER GP-HYDRAULIC -SLOPE
82.5-MM (3.25-IN) BORE X 135-MM (5.3-IN) STROKE
PART OF 253-4756 LINES GP-SLOPE
i01854713 KEBP0346
1979766 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-8639 [1] BEARING-ALIGNING  
2. 2K-7471 [1] LOCKNUT (1-14-THD)  
3. 147-6461 [2] PLUG  
4. 147-6462 [2] SEAL-WASHER  
   
    AVAILABLE REPAIR KIT(S):
  227-8151 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES WEAR RINGS, BACKUP RING, O-RING SEALS, U-CUP SEAL, WIPER SEAL & W/O-RING SEAL)
 

#KEBP03460037
 

263-2817: CYLINDER GP-HYDRAULIC

263-2817 CYLINDER GP-HYDRAULIC -SLOPE
63.5-MM (2.5-IN) BORE X 64-MM (2.52-IN) STROKE
PART OF 299-5765 LINES GP-SLOPE
AN ATTACHMENT
i02583038 KEBP0346
2632817 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5E-8632 [1] RING  
2. 2K-0337 [1] LOCKNUT (3/4-16-THD)  
3. 8S-6377 [2] PIN-LOCK  
4. 5E-8583 [2] PIN  
   
    AVAILABLE REPAIR KIT(S):
  287-7720 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES WEAR RING, BACKUP RING, O-RING SEALS, SEALS & WIPER)
 

#KEBP03460038
 

295-3078: LINES GP-EXTENDER

295-3078 LINES GP-EXTENDER
PART OF 294-0947 SCREED AR
i02793109 KEBP0346
2953078 LINES GP-EXTENDER Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8508 [2] NUT-FULL (7/8-14-THD)  
2. 165-4732 [2] PIN  
3. 165-4744 [2] ADJUSTER  
4. 197-9821 [2] TUBE AS  
5. 197-9822 [2] TUBE AS  
6. 197-9823 I [2] HOSE AS  
7. 197-9824 I [2] HOSE AS  
8. 213-9261 [2] SETSCREW  
9. 299-9601 [2] CYLINDER GP-HYDRAULIC  
    (EACH INCLUDES)
  5D-1986 [1] LOCKNUT (7/8-14-THD)  
  312-3645 [1] KIT-SEAL  
    (INCLUDES WEAR RINGS, O-RING SEALS, BACKUP RING, SEALS & WIPER)
10. 148-8378 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
11. 150-3036 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-1905 [1] ELBOW  
12. 4J-5477 [4] SEAL-O-RING  
13. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
14. 5P-9297 [4] CLIP  
15. 6V-8801 [4] NUT (3/8-16-THD)  
16. 8C-6913 [2] WASHER-HARD (24X41.5X4-MM THK)  
17. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#KEBP03460039
 

253-4756: LINES GP-SLOPE

253-4756 LINES GP-SLOPE
S/N TDS1-105
PART OF 294-0947 SCREED AR
i02793257 KEBP0346
2534756 LINES GP-SLOPE Parts scheme 2534756 LINES GP-SLOPE Parts scheme
  For full view, you need register

Parts for your AS2252C ASPHALT SCREED:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-5676 [1] PLUG-DUST  
2. 5R-6868 [1] COUPLER AS-QUICK DISCONNECT (FEMALE)  
3. 6W-2463 [4] CLAMP  
4. 8C-1457 [2] BEARING  
5. 9D-8831 [2] BOLT-SPECIAL  
6. 106-6340 [4] SPACER (10.74X17.14X7-MM THK)  
7. 108-2084 [4] PIN AS  
8. 149-0195 [2] VALVE-SHUTOFF  
9. 165-6365 [1] FITTING AS  
  3J-1907 [1] SEAL-O-RING  
  7W-7381 [1] FITTING-OUTLET  
10. 177-2215 [1] STRAP-DUAL CLAMP  
11. 183-3399 [3] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
12. 197-9766 Y [2] CYLINDER GP-HYDRAULIC (SLOPE)  
13. 197-9767 [6] NUT-JAM (1-1/4-12-THD)  
14. 319-9527 [1] SPACER  
15. 197-9769 [1] SPACER  
16. 197-9814 I [2] HOSE AS  
17. 197-9817 I [2] HOSE AS  
18. I [1] HOSE AS  
19. 319-8889 I [1] HOSE AS  
20. 300-0505 Y [2] VALVE GP-SOLENOID (SLOPE)  
21. 300-0507 [2] BRACKET  
22. 148-8374 [10] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8723 [1] ELBOW  
23. 148-8378 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8724 [1] ELBOW  
24. 148-8413 [2] REDUCER AS  
    (EACH INCLUDES)
  4J-5477 [1] SEAL-O-RING  
  6V-8934 [1] ADAPTER  
25. 148-8434 [1] TEE AS  
  6V-8397 [2] SEAL-O-RING  
  6V-9843 [1] TEE  
26. 150-3033 [4] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  8T-0164 [1] ELBOW  
27. 150-3069 [1] UNION AS  
  6V-8397 [4] SEAL-O-RING  
  7X-3406 [1] ADAPTER-CROSS  
28. 150-3070 [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  7X-3163 [1] ADAPTER-SWIVEL  
29. 150-4050 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  8T-0788 [1] ELBOW  
30. 303-6613 I [2] HOSE AS  
31. 3V-0046 [2] PLATE  
32. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
33. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
34. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
35. 6V-8801 [6] NUT (3/8-16-THD)  
36. 7X-0296 [6] BOLT (3/8-16X5.5-IN)  
37. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
38. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 8T-8919 [4] BOLT (1/2-13X1.75-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Toggle Switch - Inspect
AS2252C Asphalt Screed
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Procedure to Waterproof Temperature Sensors on Certain Asphalt Screeds{1408, 5639, 6640}
Procedure to Waterproof Temperature Sensors on Certain Asphalt Screeds{1408, 5639, 6640}
Procedure to Install New Relay Assembly on Certain Asphalt Pavers{1408, 1422, 4493, 7426}
Procedure to Install New Relay Assembly on Certain Asphalt Pavers{1408, 1422, 4493, 7426}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Specifications
Screed Wiring
AS2252C Asphalt Screed
Wiring (Screed Heater)
AS2252C Asphalt Screed
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR EVALUATING THE ELECTRIC SCREED HEAT SYSTEM (ESH) AND/OR UPDATING THE ESH TEMPERATURE SENSORS ON CERTAIN 8-16B, 10-20B, AS2251, AS3251C, AS2301 AND AS2302 SCREEDS ON CERTAIN AP-800D, AP-655C, AP600D, AP655D, AP-1000D AND AP-1055D ASPHALT PAVERS; AND ON CERTAIN BARBER GREENE BG-260D AND BG-2455D ASPHALT PAVERS MANUFACTURED BY CATERPILLAR
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING ELECTRIC SCREED HEAT CONTROL RELAYS ON CERTAIN AP-1000D, AP-1055D, BG-260D, AP-800D, AP-655D, AP-600D ASPHALT PAVERS AND CERTAIN 10-20B, 8-16B, AS2301, AS2302, AS2251, AS3251C, AND AS2252C SCREEDS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING ELECTRIC SCREED HEAT COMPONENTS ON CERTAIN 10-20B, AS2301, AS2302, AS2252C, AND AS3251C SCREEDS USED ON CERTAIN AP-600D, AP-655D, AP-1000D, AND AP-1055D ASPHALT PAVERS
Testing and Adjusting
Electrical Connector - Inspect
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
Wiring Harness (Open Circuit) - Test
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
Wiring Harness (Short Circuit) - Test
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
Troubleshooting
Electrical Power Supply
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
CAN Data Link 1
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
CAN Data Link 2
Cat® Grade and Slope v2.2x for Pavers and Cold Planers
Disassembly and Assembly
Heating Element (Extender) - Remove and Install
AS2252C Asphalt Screed
Heating Element (Main Screed) - Remove and Install
AS2252C Asphalt Screed
Service Magazine
A New Procedure is Available to Test the Electrical System on Asphalt Screeds {1408, 6643, 664E}
2008/05/12
A New Procedure is Available to Waterproof the Temperature Sensors on Certain Asphalt Screeds {1408, 5639, 6640}
2008/07/21
A New Procedure is Available to Install a New Relay Assembly on Certain Asphalt Pavers {1408, 1422, 4493, 7426}
2010/01/27
Version 1.21 Cat Grade and Slope Firmware and Hardware Has Been Released For Asphalt Pavers and Cold Planers {1408, 7219, 7220, 7610, 7620}
2012/05/02
Wiring Changes are Required for the Right Hydraulic Mainframe Extension After Implement ECM Software Update for Certain Asphalt Screeds and Asphalt Pavers {1408}
2015/05/21
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Replacement Connectors are Available For Certain Cat Grade Control Harnesses {1408, 1439, 5643}
Replacement Connectors are Available For Certain Cat Grade Control Harnesses {1408, 1439, 5643}

Caterpillar Parts SIS Catalog AS2252C :

WIRING GP-HEATER
293-6541 WIRING GP-HEATER
WIRING GP-HEATER
293-6541 WIRING GP-HEATER
SENSOR GP-TEMPERATURE
334-7882 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
322-9153 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
322-9153 SENSOR GP-TEMPERATURE
488-3921 KIT-SCREED HEATING ELEMENT
488-3841 KIT-SCREED HEATING ELEMENT
433-6924 HARNESS AS-SCREED
WIRING GP-SCREED
276-4552 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
WIRING GP-SCREED
293-6625 WIRING GP-SCREED
CYLINDER GP-HYDRAULIC
197-9766 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
263-2817 CYLINDER GP-HYDRAULIC
LINES GP-EXTENDER
295-3078 LINES GP-EXTENDER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.