MACHINE ARRANGEMENT
SCREED ARHYDRAULIC SYSTEM
GENERATOR GP-HYDRAULICMACHINE ARRANGEMENT
MACHINE ARSCREED AR
MACHINE ARRANGEMENT
SCREED AR
#KEBP03530010
339-1624: CONVERSION GP-SCREED
339-1624 CONVERSION GP-SCREED -LPG HEAT, 250-MM EXTENSION
S/N TFM1-UP
PART OF 339-1701, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
S/N TFM1-UP
PART OF 339-1701, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-9693 M | [8] | STUD (M12X1.75X100-MM) | |
| 2. | 248-9997 M | [16] | NUT-BRASS (M12X1.75-THD) | |
| 3. | 249-3036 M | [8] | BOLT (M12X1.75X20-MM) | |
| 4. | 251-1430 | [2] | PLATE | |
| 5. | 266-7487 | [2] | BOX AS | |
| 6. | 272-4940 | [2] | BOX AS | |
| 7. | 335-0607 | [2] | SUPPORT AS | |
| 8. | 335-0608 | [2] | BURNER | |
| 9. | 339-1622 | [2] | CHANNEL AS | |
| 10. | 339-1623 | [2] | SUPPORT AS | |
| 11. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 14. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 15. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| M | METRIC PART | |||
#KEBP03530011
339-1633: CONVERSION GP-SCREED
339-1633 CONVERSION GP-SCREED -LPG HEAT, 750-MM EXTENSION
S/N TFM1-UP
PART OF 339-1702, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
S/N TFM1-UP
PART OF 339-1702, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-9693 M | [20] | STUD (M12X1.75X100-MM) | |
| 2. | 248-9997 M | [40] | NUT-BRASS (M12X1.75-THD) | |
| 3. | 249-3036 M | [8] | BOLT (M12X1.75X20-MM) | |
| 4. | 272-4940 | [2] | BOX AS | |
| 5. | 307-8655 | [2] | PLATE-SCREED | |
| 6. | 307-8656 | [2] | BAR-TAMPER | |
| 7. | 307-8657 | [2] | DIFFUSER AS | |
| 8. | 335-0607 | [2] | SUPPORT AS | |
| 9. | 335-0608 | [2] | BURNER | |
| 10. | 339-1629 | [4] | CHANNEL AS | |
| 11. | 339-1632 | [2] | SUPPORT AS | |
| 12. | 7X-2553 M | [6] | BOLT (M16X2X40-MM) | |
| 13. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4200 M | [8] | BOLT (M8X1.25X16-MM) | |
| 15. | 8T-4223 | [28] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
| 19. | 9X-8257 | [6] | WASHER (17.5X30X3.5-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| M | METRIC PART | |||
#KEBP03530012
339-1639: CONVERSION GP-SCREED
339-1639 CONVERSION GP-SCREED -FUEL FIRED HEATER
S/N TFM1-UP
PART OF 339-1704 EXTENSION AR-SCREED
AN ATTACHMENT
S/N TFM1-UP
PART OF 339-1704 EXTENSION AR-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-9693 M | [40] | STUD (M12X1.75X100-MM) | |
| 2. | 248-9997 M | [80] | NUT-BRASS (M12X1.75-THD) | |
| 3. | 249-3036 M | [16] | BOLT (M12X1.75X20-MM) | |
| 4. | 272-4940 | [4] | BOX AS | |
| 5. | 307-8655 | [4] | PLATE-SCREED | |
| 6. | 307-8656 | [4] | BAR-TAMPER | |
| 7. | 307-8657 | [4] | DIFFUSER AS | |
| 8. | 335-0607 | [4] | SUPPORT AS | |
| 9. | 335-0608 | [4] | BURNER | |
| 10. | 339-1629 | [8] | CHANNEL AS | |
| 11. | 339-1632 | [4] | SUPPORT AS | |
| 12. | 7X-2553 M | [12] | BOLT (M16X2X40-MM) | |
| 13. | 8T-4136 M | [16] | BOLT (M10X1.5X25-MM) | |
| 14. | 8T-4200 M | [16] | BOLT (M8X1.25X16-MM) | |
| 15. | 8T-4223 | [56] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4896 | [16] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8T-4908 M | [16] | BOLT (M8X1.25X25-MM) | |
| 19. | 9X-8257 | [12] | WASHER (17.5X30X3.5-MM THK) | |
| QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES | ||||
| M | METRIC PART | |||
#KEBP03530013
270-6762: GENERATOR AR-HYDRAULIC
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 289-5220 Y | [1] | GENERATOR GP (HYDRAULIC) | ||
| -OR- | ||||
| 419-0054 Y | [1] | GENERATOR GP (HYDRAULIC) | ||
| 289-5222 Y | [1] | LINES GP-GENERATOR | ||
| 289-5224 Y | [1] | MOTOR & MTG GP-GENERATOR | ||
| 289-5221 Y | [1] | PUMP & MTG GP-GENERATOR | ||
| 289-5223 Y | [1] | VALVE & MTG GP-CONTROL (GENERATOR) | ||
| 297-1002 Y | [1] | WIRING GP-HYDRAULIC GENERATOR | ||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03530014
306-5155: KIT-MAINTENANCE
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 195-8090 Y | [1] | SENSOR GP-POSITION (STEERING) | ||
| 167-0138 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | ||
| 1V-6652 Q | [1] | SWITCH AS-TOGGLE (FUEL PUMP CONTROL) | ||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 109-7186 | [1] | SWITCH GP-TOGGLE (PARKING BRAKE OVERRIDE CONTROL) | ||
| 3L-8187 | [6] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [6] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 6T-3643 H | [2] | CIRCUIT BREAKER AS (15-AMPERE)(SCREED) | ||
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE) | ||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 171-2206 | [1] | CIRCUIT BREAKER AS (50-AMPERE)(STARTING AID) | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(STARTING AID) | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 213-8147 | [1] | POTENTIOMETER AS (PROPEL SPEED) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 D | WIRE (18-GA, BLACK)(1-M) | |||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (25-CM) | |||
| 348-2408 | [1] | RELAY AS (24-VOLT)(SCREED CONTROL) | ||
| 3E-6477 | [2] | RELAY AS (24-VOLT)(FEEDER CONTROL) | ||
| 105-4684 | [1] | RELAY AS (24-VOLT)(ENGINE START) | ||
| 255-5011 | [1] | RELAY AS (24-VOLT)(SCREED CONTROL) | ||
| 3D-9718 X | [1] | SWITCH AS-PUSH BUTTON (HORN) | ||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 6V-8832 | [1] | NUT (5/8-32-THD) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 4D-1836 P | [2] | SWITCH-TOGGLE (FRONT WHEEL ASSIST) | ||
| 7N-8008 S | [1] | SWITCH AS-TOGGLE (THROTTLE CONTROL) | ||
| 3L-8187 | [6] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [6] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 8C-9812 | [2] | SWITCH AS-TOGGLE (FEEDER CONTROL) | ||
| (EACH INCLUDES) | ||||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 9G-0011 V | [2] | SWITCH AS-TOGGLE (AUGER RAISE, LOWER) | ||
| (EACH INCLUDES) | ||||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 246-8912 T | [2] | SWITCH GP-TOGGLE (HOPPER) | ||
| (EACH INCLUDES) | ||||
| 3L-8187 | [3] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 6V-8374 | [3] | SCREW-MACHINE (6-32X0.25-IN) | ||
| 116-5277 | [2] | BLOCK (CONTACT) | ||
| 7N-5876 | [4] | LAMP (24-VOLT, 0.2-AMPERE) | ||
| 6R-4315 | [1] | NOZZLE (SPRAY DOWN) | ||
| 2M-9780 | [3] | SEAL-O-RING | ||
| 2S-4078 | [3] | SEAL-O-RING | ||
| 3D-2824 | [3] | SEAL-O-RING | ||
| 3J-1907 | [3] | SEAL-O-RING | ||
| 3J-7354 | [3] | SEAL-O-RING | ||
| 3K-0360 | [3] | SEAL-O-RING | ||
| 4J-5477 | [3] | SEAL-O-RING | ||
| 4K-1388 | [3] | SEAL-O-RING | ||
| 5K-9090 | [3] | SEAL-O-RING | ||
| 6K-6307 | [3] | SEAL-O-RING | ||
| 6V-8397 | [3] | SEAL-O-RING | ||
| 6V-8398 | [3] | SEAL-O-RING | ||
| 6V-8400 | [3] | SEAL-O-RING | ||
| 6V-9746 | [3] | SEAL-O-RING | ||
| 7J-9108 | [3] | SEAL-O-RING | ||
| 7M-8485 | [3] | SEAL-O-RING | ||
| 8T-0315 | [3] | SEAL-O-RING | ||
| 115-7948 | [1] | SOCKET-RELAY | ||
| 245-7724 | [1] | ELEMENT-COUPLING | ||
| 189-3158 | [1] | SUPPRESSOR-ARC | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | USED FOR FEEDERS, FUEL, PROPEL, SCREED, VIBRATOR | |||
| P | USED FOR FRONT WHEEL ASSIST, GENERATOR, HAZARD BEACON, SCREED ASSIST, VIBRATOR, WORKLIGHTS | |||
| Q | USED FOR BURNER SPRAY, FUEL PUMP | |||
| S | USED FOR SCREED CROWN, SCREED HEIGHT, SCREED SLOPE | |||
| T | USED FOR EXTENDERS, GRADE JOG, HOPPERS, SCREED DISPLAY MODE | |||
| V | USED FOR AUGER RAISE/LOWER, AUGER REVERSING, THROTTLE | |||
| X | USED FOR SCREED HORN | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03530015
281-6251: SCREED AR
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 250-3368 Y | [1] | ADJUSTER GP-MANUAL | ||
| 286-3634 Y | [1] | ARM GP-DROP | ||
| 250-3366 Y | [1] | DEFLECTOR GP | ||
| 286-3490 Y | [1] | FRAME GP-SCREED | ||
| Y | [1] | HYDRAULIC AR | ||
| 250-3370 Y | [1] | LINES GP-GREASE | ||
| Y | [1] | FITTING GP-GREASE | ||
| Y | [1] | PLATE & FILM GP | ||
| 286-3618 Y | [1] | PLATFORM GP-OPERATOR | ||
| 251-0764 Y | [1] | TAMPER GP-SCREED | ||
| 263-2536 Y | [1] | VIBRATORY GP | ||
| Y | [1] | WIRING GP-SCREED | ||
| -OR- | ||||
| 364-6477 Y | [1] | WIRING GP-SCREED | ||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP03530016
295-2102: SCREED AR
295-2102 SCREED AR
S/N TFM1-UP
PART OF 288-9424 EXTENSION AR, 288-9423, 288-9425, 288-9426 EXTENSION AR-SCREED
AN ATTACHMENT
S/N TFM1-UP
PART OF 288-9424 EXTENSION AR, 288-9423, 288-9425, 288-9426 EXTENSION AR-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03530017
295-2104: SCREED AR
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03530018
339-1637: SCREED AR
339-1637 SCREED AR
S/N TFM1-UP
PART OF 288-9424 EXTENSION AR, 288-9426, 339-1702, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
S/N TFM1-UP
PART OF 288-9424 EXTENSION AR, 288-9426, 339-1702, 339-1703 EXTENSION AR-SCREED
AN ATTACHMENT
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SIS#KEBP03530019
339-1643: SCREED AR
For full view, you need register
Parts for your AP-600D ASPHALT PAVER:
CATERPILLAR SISInformation:
Caterpillar Parts SIS Catalog AP-600D :
Truck sale:
140,000
Caterpillar AP-600D, Construction
- Asphalt pavers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Netherlands
- Asphalt pavers
CATERPILLAR FINANCIAL SERVICES CORPORATION
Netherlands
