AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

AP500E BG500E Asphalt Paver B5E00001-UP (MACHINE) POWERED BY C4.4 Engine BASIC ENGINE Caterpillar SIS



ASPHALT PAVER BG500E ASPHALT PAVER B5E
 AP500E BG500E Asphalt Paver B5E00001-UP (MACHINE) POWERED BY C4.4 Engine KEBP0364 BG500E B5E   (2010)

Parts group BG500E:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
298-5090 CAMSHAFT GP
298-5090 CAMSHAFT GP
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CRANKSHAFT GP
CRANKSHAFT GP
298-5086 CRANKSHAFT GP
298-5086 CRANKSHAFT GP
S/N C4E1-8929
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CRANKSHAFT GP
298-5086 CRANKSHAFT GP
298-5086 CRANKSHAFT GP
S/N C4E8930-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CRANKSHAFT GP
330-1736 CRANKSHAFT GP
330-1736 CRANKSHAFT GP
S/N C4E1-8929
WITH SPLINE
PART OF 298-5086 CRANKSHAFT GP
FIELD REPLACEMENT ORDER @@@@@364-2829@@@@@
ALSO AN ATTACHMENT
CRANKSHAFT GP
359-0716 CRANKSHAFT GP
359-0716 CRANKSHAFT GP
S/N C4E8930-UP
W/O SPLINE
PART OF 298-5086 CRANKSHAFT GP
ALSO AN ATTACHMENT
CRANKSHAFT GP
359-0716 CRANKSHAFT GP
359-0716 CRANKSHAFT GP
S/N C4E1-UP
W/O SPLINE
PART OF 298-5086 CRANKSHAFT GP
AN ATTACHMENT
CRANKSHAFT GP
364-2829 CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4E1-UP
WITH SPLINE
Type 1
FIELD REPLACEMENT FOR @@@@@330-1736@@@@@
CRANKSHAFT GP
364-2829 CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4E1-UP
WITH SPLINE
Type 2
FIELD REPLACEMENT FOR @@@@@330-1736@@@@@
CRANKSHAFT GP
364-2829 CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4E1-UP
WITH SPLINE
Type 3
FIELD REPLACEMENT FOR @@@@@330-1736@@@@@
CYLINDER BLOCK GP
CYLINDER BLOCK GP
298-5085 CYLINDER BLOCK GP
298-5085 CYLINDER BLOCK GP
S/N C4E1-8923
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
298-5085 CYLINDER BLOCK GP
298-5085 CYLINDER BLOCK GP
S/N C4E8924-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
330-4789 CYLINDER BLOCK GP
330-4789 CYLINDER BLOCK GP
S/N C4E1-8923
PART OF 298-5085 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
CYLINDER BLOCK GP
363-3907 CYLINDER BLOCK GP
363-3907 CYLINDER BLOCK GP
S/N C4E8924-UP
PART OF 298-5085 CYLINDER BLOCK GP
ALSO AN ATTACHMENT
PLUG GP-ENGINE
298-5098 PLUG GP-ENGINE
298-5098 PLUG GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PLUG GP-ENGINE
298-5131 PLUG GP-ENGINE
298-5131 PLUG GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD AS
298-4526 CYLINDER HEAD AS
298-4526 CYLINDER HEAD AS
S/N C4E1-UP
PART OF 298-5088 CYLINDER HEAD GP
ALSO AN ATTACHMENT
CYLINDER HEAD GP
298-5088 CYLINDER HEAD GP
298-5088 CYLINDER HEAD GP
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PLUG GP-CYLINDER HEAD
298-5129 PLUG GP-CYLINDER HEAD
298-5129 PLUG GP-CYLINDER HEAD
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PLUG GP-ENGINE
298-5098 PLUG GP-ENGINE
298-5098 PLUG GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PLUG GP-ENGINE
298-5131 PLUG GP-ENGINE
298-5131 PLUG GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
323-9874 DRIVE GP-FAN
323-9874 DRIVE GP-FAN
S/N C4E1-UP
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
DRIVE GP-FAN
344-4714 DRIVE GP-FAN
344-4714 DRIVE GP-FAN
S/N C4E1-UP
PART OF 285-3201, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
DRIVE GP-FAN
391-2689 DRIVE GP-FAN
391-2689 DRIVE GP-FAN
S/N C4E1-UP
PART OF 369-7856 ENGINE AR-PRIMARY
AN ATTACHMENT
MOUNTING GP-FAN
299-5082 MOUNTING GP-FAN
299-5082 MOUNTING GP-FAN
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
306-2314 FLYWHEEL GP
306-2314 FLYWHEEL GP
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
298-5110 GEAR GP-FRONT
298-5110 GEAR GP-FRONT
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
299-5057 HOUSING GP-FLYWHEEL
299-5057 HOUSING GP-FLYWHEEL
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
299-5033 LIFTING GP-ENGINE
299-5033 LIFTING GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
299-5125 MOUNTING GP-ENGINE
299-5125 MOUNTING GP-ENGINE
S/N C4E8920-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
304-8763 MOUNTING GP-ENGINE
304-8763 MOUNTING GP-ENGINE
S/N C4E8730-UP
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE
333-4789 MOUNTING GP-ENGINE
333-4789 MOUNTING GP-ENGINE
S/N C4E1-8729
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
MOUNTING GP-ENGINE FLEXIBLE
323-4650 MOUNTING GP-ENGINE FLEXIBLE
323-4650 MOUNTING GP-ENGINE FLEXIBLE
S/N B5E1-UP; JWK1-UP
PART OF 321-2420 INSTALLATION AR-ENGINE
PAN GP-OIL
DRAIN GP-ENGINE OIL
328-5480 DRAIN GP-ENGINE OIL
328-5480 DRAIN GP-ENGINE OIL
S/N B5E1-UP; JWK1-UP
PART OF 321-2420 INSTALLATION AR-ENGINE
PAN GP-OIL
322-8424 PAN GP-OIL
322-8424 PAN GP-OIL
S/N C4E1-UP
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PAN GP-OIL
322-8424 PAN GP-OIL
322-8424 PAN GP-OIL
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PARTS GP-MISCELLANEOUS
COVER GP-ENGINE
298-5111 COVER GP-ENGINE
298-5111 COVER GP-ENGINE
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PISTON & ROD GP
PISTON & ROD GP
298-5087 PISTON & ROD GP
298-5087 PISTON & ROD GP
S/N C4E1-8929
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PISTON & ROD GP
298-5087 PISTON & ROD GP
298-5087 PISTON & ROD GP
S/N C4E8930-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PULLEY GP
PULLEY AS-IDLER
207-8118 PULLEY AS-IDLER
207-8118 PULLEY AS-IDLER
S/N B5E1-UP; JWK166-UP
PART OF 321-2465 GENERATOR & MOUNTING GP
PULLEY GP-CRANKSHAFT
298-5101 PULLEY GP-CRANKSHAFT
298-5101 PULLEY GP-CRANKSHAFT
S/N C4E1-8929
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
PULLEY GP-CRANKSHAFT
360-7346 PULLEY GP-CRANKSHAFT
360-7346 PULLEY GP-CRANKSHAFT
S/N C4E8930-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
298-5097 COVER GP-VALVE MECHANISM
298-5097 COVER GP-VALVE MECHANISM
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
COVER GP-VALVE MECHANISM
323-6222 COVER GP-VALVE MECHANISM
323-6222 COVER GP-VALVE MECHANISM
S/N C4E1-8729
PART OF 285-3201 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
ROCKER ARM GP
298-4533 ROCKER ARM GP
298-4533 ROCKER ARM GP
S/N C4E1-UP
PART OF 298-5089 ROCKER ARM GP
ALSO AN ATTACHMENT
ROCKER ARM GP
298-5089 ROCKER ARM GP
298-5089 ROCKER ARM GP
S/N C4E1-UP
PART OF 285-3201, 369-7856, 384-6681 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT

Information:

(For parts list, see above)

Disassembly and Assembly
Air Compressor - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Balancer - Install
C4.4 Engines for Caterpillar Built Machines
Balancer - Remove
C4.4 Engines for Caterpillar Built Machines
Specifications
Belt Tension Chart
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Specifications
Camshaft Bearings
C4.4 Engines for Caterpillar Built Machines
Camshaft
C4.4 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal - Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Main Bearing Journal - Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Crankshaft - Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Crankshaft - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines
Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.4 Engines for Caterpillar Built Machines
Crankshaft Pulley - Check
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.4 Engines for Caterpillar Built Machines
Crankshaft - Install
C4.4 Engines for Caterpillar Built Machines
Crankshaft - Remove
C4.4 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C4.4 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C4.4 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C4.4 Engines for Caterpillar Built Machines
Crankshaft Timing Ring - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Crankshaft for 3054C, 3054E, C4.4 and C4.4 (Mech) Engines {1201, 1202, 1205, 1218}
2011/01/06
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Piston Cooling Jet
C4.4 Engines for Caterpillar Built Machines
Cylinder Block
C4.4 Engines for Caterpillar Built Machines
Main Bearing Journal - Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Main Bearing Journal - Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.4 Engines for Caterpillar Built Machines
Cylinder Block - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.4 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft for 3054C, 3054E, C4.4 and C4.4 (Mech) Engines {1201, 1202, 1205, 1218}
2011/01/06
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head Valves
C4.4 Engines for Caterpillar Built Machines
Cylinder Head
C4.4 Engines for Caterpillar Built Machines
Fuel Injection Nozzles
C4.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Valve Guide - Inspect
C4.4 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C4.4 Engines for Caterpillar Built Machines
Cylinder Head - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Cylinder Head - Install
C4.4 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C4.4 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Accessory Drive - Remove
C4.4 Engines for Caterpillar Built Machines
Accessory Drive - Disassemble
C4.4 Engines for Caterpillar Built Machines
Accessory Drive - Assemble
C4.4 Engines for Caterpillar Built Machines
Accessory Drive - Install
C4.4 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
AP500E and BG500E Asphalt Pavers
Disassembly and Assembly
Fan Drive - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Pump Drive Breather - Clean
AP500E and BG500E Asphalt Pavers
Pump Drive Oil Level - Check
AP500E and BG500E Asphalt Pavers
Pump Drive Oil - Change
AP500E and BG500E Asphalt Pavers
Pump Drive Oil Sample - Obtain
AP500E and BG500E Asphalt Pavers
Specifications
Pump Drive
AP500E and BG500E Asphalt Pavers Propel System
Disassembly and Assembly
Pump Drive - Disassemble
AP500E and BG500E Asphalt Pavers Machine Systems
Pump Drive - Assemble
AP500E and BG500E Asphalt Pavers Machine Systems
Pump Drive - Remove
AP500E and BG500E Asphalt Pavers Machine Systems
Pump Drive - Install
AP500E and BG500E Asphalt Pavers Machine Systems
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
AP500E and BG500E Asphalt Pavers
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Systems Operation
Introduction
C4.4 Engines for Caterpillar Built Machines
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C4.4 Engines for Caterpillar Built Machines
Flywheel Housing
C4.4 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Install
C4.4 Engines for Caterpillar Built Machines
Flywheel - Remove
C4.4 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C4.4 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C4.4 Engines for Caterpillar Built Machines
Gear Group - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Install
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Remove
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Remove
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Remove
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Install
C4.4 Engines for Caterpillar Built Machines
Idler Gear - Install
C4.4 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
C4.4 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Specifications
Front Housing and Covers
C4.4 Engines for Caterpillar Built Machines
Crankshaft Seals
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Front Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Housing (Front) - Install
C4.4 Engines for Caterpillar Built Machines
Housing (Front) - Remove
C4.4 Engines for Caterpillar Built Machines
Specifications
Engine Lifting Bracket
C4.4 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Mounts - Inspect
AP500E and BG500E Asphalt Pavers
Engine Oil Level - Check
AP500E and BG500E Asphalt Pavers
Engine Oil and Filter - Change
AP500E and BG500E Asphalt Pavers
Specifications
Engine Oil Pan
C4.4 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install - Cast Iron Oil Pan
C4.4 Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install - Aluminum and Pressed Steel Oil Pans
C4.4 Engines for Caterpillar Built Machines
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston Cooling Jet
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal - Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Connecting Rod - For Use With Steel Crankshaft
C4.4 Engines for Caterpillar Built Machines
Piston and Rings
C4.4 Engines for Caterpillar Built Machines
Connecting Rod - For Use With Spheroidal Graphite Iron (SGI) Crankshaft
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal - Spheroidal Graphite Iron Crankshaft
C4.4 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C4.4 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C4.4 Engines for Caterpillar Built Machines
Connecting Rod - Inspect
C4.4 Engines for Caterpillar Built Machines
Compression - Test
C4.4 Engines for Caterpillar Built Machines
Piston Height - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install - Connecting rods in position
C4.4 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove - Connecting rods in position
C4.4 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C4.4 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C4.4 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C4.4 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C4.4 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft for 3054C, 3054E, C4.4 and C4.4 (Mech) Engines {1201, 1202, 1205, 1218}
2011/01/06
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
AP500E and BG500E Asphalt Pavers
Specifications
Crankshaft Pulley
C4.4 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Testing and Adjusting
Crankshaft Pulley - Check
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Pulley - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Crankshaft Pulley - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft for 3054C, 3054E, C4.4 and C4.4 (Mech) Engines {1201, 1202, 1205, 1218}
2011/01/06
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
Reuse and Salvage for C4.4, C6.6 & C7.1 Engine Cylinder Blocks {0374, 0599, 0701, 0705, 1200, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Specifications
Belt Tension Chart
C4.4 Engines for Caterpillar Built Machines
Testing and Adjusting
V-Belt - Test
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Alternator Belt - Remove and Install - Engines With an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
V-Belts - Remove and Install - Engines Without an Automatic Belt Tensioner
C4.4 Engines for Caterpillar Built Machines
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Check
AP500E and BG500E Asphalt Pavers
Specifications
Lifter Group
C4.4 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C4.4 Engines for Caterpillar Built Machines
Rocker Shaft
C4.4 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Valve Guide - Inspect
C4.4 Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C4.4 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C4.4 Engines for Caterpillar Built Machines
Valve Depth - Inspect
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Lifter Group - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Rocker Shaft - Assemble
C4.4 Engines for Caterpillar Built Machines
Rocker Shaft - Disassemble
C4.4 Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Install
C4.4 Engines for Caterpillar Built Machines
Rocker Shaft and Pushrod - Remove
C4.4 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C4.4 Engines for Caterpillar Built Machines
Service Magazine
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.