AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

277-2004 MOTOR GP-POWER ADJUSTER S/N TJF1-UP 24-VOLT PART OF 276-4590, 328-3514, 351-0186 CROWN GP-POWER AN ATTACHMENT BG1055E


CONTROLS
MOTOR GP-POWER ADJUSTER
CROWN GP
SLOPER GP
ELECTRICAL SYSTEM
BOX GP
ELECTRICAL AND STARTING SYSTEM
ALARM GP

ASPHALT PAVER BG1055E ASPHALT PAVER FRR
 AP1055E BG1055E Asphalt Paver FRR00001-UP (MACHINE) POWERED BY C7.1 Engine KEBP0372 BG1055E FRR   (2010)

CONTROLS

MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2004 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2005 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
 

#KEBP03720180
 

277-2004: MOTOR GP-POWER ADJUSTER

277-2004 MOTOR GP-POWER ADJUSTER
S/N TJF1-UP
24-VOLT
PART OF 276-4590, 328-3514, 351-0186 CROWN GP-POWER
AN ATTACHMENT
i02513610 KEBP0372
2772004 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 277-2002 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, HOUSING COVER, REAR HOUSING & TORQUE LIMITER)
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
24. 6L-4082 [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP03720181
 

277-2005: MOTOR GP-POWER ADJUSTER

277-2005 MOTOR GP-POWER ADJUSTER
S/N TJF1-UP
24-VOLT
PART OF 276-4573 SLOPER GP-POWER
AN ATTACHMENT
i02462100 KEBP0372
2772005 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 171-3715 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (48-CM)  
17. 153-6440 L TUBE (3-DM)  
18. 277-2003 J [1] KIT-GEARBOX  
    (INCLUDES HOUSING COVER, BUSHINGS, WASHER, REAR HOUSING, TORQUE LIMITER & PARTS MARKED J)
19. 6L-4082 [1] RACE-THRUST BEARING  
20. 311-8715 [1] WASHER (5X11X1-MM THK)  
21. 311-8716 [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 [1] BUSHING-BRONZE  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   ORDER BY THE DECIMETER
  M   METRIC PART
 

#KEBP03720182
 

277-2006: MOTOR GP-POWER ADJUSTER

277-2006 MOTOR GP-POWER ADJUSTER
S/N TJF1-UP
24-VOLT
PART OF 276-4579, 328-3509 ADJUSTER GP-HEIGHT
AN ATTACHMENT
i02453264 KEBP0372
2772006 MOTOR GP-POWER ADJUSTER Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 168-2166 [1] GASKET-MOTOR  
3. 171-6788 J [1] PIN  
4. 278-0644 J [1] GASKET-COVER  
5. 123-3684 J [1] BUSHING-BRONZE  
6. 171-3711 J [1] SHAFT-GEAR  
7. 171-6787 J [2] DOWEL  
8. 1L-0834 J [1] BEARING AS-NEEDLE  
9. 168-2512 J [1] SHAFT-IDLER  
10. 077-5077 J [2] BUSHING-TERMINAL  
11. 5M-3062 J [1] BOLT (3/8-16X0.75-IN)  
12. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 122-8707 J [8] SCREW-HEX (10-16X1-IN)  
15. 206-6738 [1] MOTOR AS (24-VOLT)  
16. 109-0887 E SLEEVE (24-CM EACH)  
17. 153-6440 H TUBE (3-DM)  
18. 272-7281 J [1] KIT-GEARBOX  
    (ALSO INCLUDES WASHER, BUSHINGS, TORQUE LIMITER, HOUSING COVER & REAR HOUSING)
20. 311-8715 J [1] WASHER (5X11X1-MM THK)  
21. 311-8716 J [1] BUSHING (12X15X7.9-MM THK)  
22. 311-8717 J [1] BUSHING (12.75X15.95X9.53-MM THK)  
23. 123-3683 J [1] BUSHING-BRONZE  
24. 6L-4082 J [1] RACE-THRUST BEARING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE DECIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#KEBP03720183
 

282-7961: SHAFT GP-DRIVE

282-7961 SHAFT GP-DRIVE -NON-ACTUATED
S/N TJF1-UP
PART OF 276-4590 CROWN GP-POWER
AN ATTACHMENT
i02513612 KEBP0372
2827961 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 282-7963 [1] SPINDLE AS  
 

#KEBP03720184
 

334-2654: SHAFT GP-DRIVE

334-2654 SHAFT GP-DRIVE -NON-ACTUATED
S/N TJF1-UP
PART OF 328-3514, 351-0186 CROWN GP-POWER
AN ATTACHMENT
i03975249 KEBP0372
3342654 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, RETAINING RINGS & BEARING NEEDLES)
2. 193-1311 [1] SHAFT AS  
3. 334-2655 [1] SPINDLE AS  
 

#KEBP03720185
 

334-2657: SHAFT GP-DRIVE

334-2657 SHAFT GP-DRIVE
S/N TJF1-UP
PART OF 328-3514 CROWN GP-POWER
AN ATTACHMENT
i04034429 KEBP0372
3342657 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-6969 [1] KIT-BEARING (DRIVE SHAFT)  
    (INCLUDES GREASE FITTING, CROSS, NEEDLE BEARINGS & RETAINER RINGS)
2. 193-1311 [1] SHAFT AS  
3. 334-2658 [1] SPINDLE AS  
 

#KEBP03720186
 

276-4573: SLOPER GP-POWER

276-4573 SLOPER GP-POWER
S/N TJF1-UP
PART OF 328-3586 SCREED AR
AN ATTACHMENT
i02683521 KEBP0372
2764573 SLOPER GP-POWER Parts scheme 2764573 SLOPER GP-POWER Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-5120 [2] NUT-JAM (3/4-16-THD)  
2. 2H-3778 [4] LOCKNUT  
3. 8I-0217 [2] PIN AS-ACTUATOR  
4. 8I-0218 [2] PIN AS-PIVOT  
5. 8I-0234 [2] POINTER  
6. 065-7893 [2] LOCKWASHER-BEARING  
7. 102-2699 Y [2] JACK GP-SLOPER  
8. 102-2700 [2] ROD END  
9. 102-2739 [2] KEY-SQUARE  
10. 8T-4133 M [8] NUT (M10X1.5-THD)  
11. 222-5883 [2] COUPLING GP  
    (EACH INCLUDES)
  4B-9806 [1] SETSCREW-SOCKET (1/4-20X0.25-IN)  
12. 253-9036 [2] NUT-JAM (1-1/4-12-THD)  
13. 277-2005 Y [2] MOTOR GP-POWER ADJUSTER (ACTUATED)  
14. 279-4231 [2] FILM-IDENTIFICATION (SLOPE SCALE)  
15. 8T-4182 M [8] BOLT (M10X1.5X45-MM)  
16. 279-6482 [4] SPACER (38X21X20-MM THK)  
17. 291-0068 [2] SUPPORT AS  
18. 284-9486 [1] FRAME AS (RH)  
19. 284-9487 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
  246-5104 [4] BUSHING  
20. 8T-5460 M [4] BOLT (M20X2.5X40-MM)  
21. 4L-6454 [4] BOLT (3/8-16X1-IN)  
22. 7X-0429 [2] BOLT (1-1/4-7X4.5-IN)  
23. 7X-0633 B [4] WASHER (34X64.5X4-MM THK)  
24. 8T-4121 [24] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03720187
 

348-7769: BOX GP-SCREED CONTROL

348-7769 BOX GP-SCREED CONTROL
S/N TJF1-UP
PART OF 328-3537, 328-3622 WIRING GP-HEATER
AN ATTACHMENT
i03813532 KEBP0372
3487769 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 348-2408 [1] RELAY AS (24-VOLT)(EXTENDER, LH)  
2A. 348-2408 [1] RELAY AS (24-VOLT)(EXTENDER, RH)  
2B. 348-2408 [1] RELAY AS (24-VOLT)(MAIN, LH)  
2C. 348-2408 [1] RELAY AS (24-VOLT)(MAIN, RH)  
2D. 348-2408 [2] RELAY AS (24-VOLT)(TRACTOR)  
3. 348-7128 [2] WIRE AS  
4. 348-7129 [2] WIRE AS  
5. 348-7763 [1] HARNESS AS-PANEL  
  7T-0093 [8] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8729 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  177-9648 [2] KIT-CONNECTING PLUG (2-PIN)  
  177-9656 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [5] PLUG-SEAL  
  103-8133 [1] KIT-RECEPTACLE (12-PIN)  
  177-9653 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  7T-0094 [12] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  5P-1475 [5] TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)  
  9G-3186 [7] TERMINAL-FORK (18-GA TO 22-GA, NO. 8 SCREW)  
  5P-1477 [20] TERMINAL-FORK (10-GA TO 12-GA, NO. 8 SCREW)  
6. 349-4773 [1] BOX AS  
7. 096-6166 [12] WASHER-HARD (4.5X9X1-MM THK)  
8. 130-5300 [6] CLIP  
9. 8C-7581 M [12] SCREW-MACHINE (M4X0.7X8-MM)  
10. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4171 M [2] BOLT (M6X1X12-MM)  
12. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
13. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#KEBP03720188
 

479-6185: BOX GP-SCREED CONTROL

479-6185 BOX GP-SCREED CONTROL
S/N TJF1-UP
PART OF 391-0179 WIRING GP-SCREED HEATER
AN ATTACHMENT
i06286266 KEBP0372
4796185 BOX GP-SCREED CONTROL Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4798 [3] FILM-IDENTIFICATION (GROUND)  
2. 301-3291 [2] TERMINAL  
3. 356-2060 [1] BOX AS  
4. 479-6689 [6] CONTACTOR  
5. 479-9297 Y [1] HARNESS AS-BOX  
6. 479-9298 Y [1] HARNESS AS-PANEL  
7. 479-9299 [2] WIRE AS  
8. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
9. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
10. 130-5300 [3] CLIP  
11. 5C-8312 M [3] NUT (M4X0.7-THD)  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4171 M [2] BOLT (M6X1X12-MM)  
14. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
15. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
16. 173-5412 E RAIL (28.8-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP03720189
 

3E-6328: ALARM GP

3E-6328 ALARM GP
S/N TJF1-UP; FRR1-UP
24-VOLT
PART OF 335-3075 WIRING GP-ELECTRONIC CONTROL
i00089659 KEBP0372
3E6328 ALARM GP Parts scheme
  For full view, you need register

Parts for your BG1055E ASPHALT PAVER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

Information:

Caterpillar Parts SIS Catalog BG1055E :

JACK GP-SLOPER
102-2699 JACK GP-SLOPER
JACK GP-HEIGHT ADJUSTER
196-2503 JACK GP-HEIGHT ADJUSTER
CROWN GP-POWER
351-0186 CROWN GP-POWER
CROWN GP-POWER
328-3514 CROWN GP-POWER
CROWN GP-POWER
276-4590 CROWN GP-POWER
CONTROL GP-THICKNESS
328-3548 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
328-3548 CONTROL GP-THICKNESS
CONTROL GP-THICKNESS
328-3547 CONTROL GP-THICKNESS
MOTOR GP-POWER ADJUSTER
277-2005 MOTOR GP-POWER ADJUSTER
MOTOR GP-POWER ADJUSTER
277-2006 MOTOR GP-POWER ADJUSTER
SHAFT GP-DRIVE
282-7961 SHAFT GP-DRIVE
SHAFT GP-DRIVE
334-2654 SHAFT GP-DRIVE
SHAFT GP-DRIVE
334-2657 SHAFT GP-DRIVE
SLOPER GP-POWER
276-4573 SLOPER GP-POWER
BOX GP-SCREED CONTROL
348-7769 BOX GP-SCREED CONTROL
BOX GP-SCREED CONTROL
479-6185 BOX GP-SCREED CONTROL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.