POWER TRAIN
PUMP GPDRIVE TRAIN GP
MOTOR GP
FRAME AND BODY
FRAME GPHITCH GP
HOOD GP
SCRAPER GP
POWER TRAIN
PUMP GP#KEBP03930220
358-1392: MOUNTING GP-PUMP
#KEBP03930221
361-5782: MOUNTING GP-PUMP
361-5782 MOUNTING GP-PUMP
S/N 4191-UP
PART OF 364-2272 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N 4191-UP
PART OF 364-2272 ENGINE AR-COMPLETE
AN ATTACHMENT
#KEBP03930222
364-2264: POWER TRAIN AR
Parts for your CB-22B COMPACTOR:
CATERPILLAR SIS#KEBP03930223
364-2360: SUPPORT GP-MOTOR
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 372-4988 | [2] | SPACER (SUPPORT) | |
2. | 377-9408 | [4] | BRACKET | |
3. | 377-9409 | [2] | BRACKET | |
4. | 396-3029 | [2] | SUPPORT-DRUM | |
5. | 396-3030 | [2] | SUPPORT-DRUM | |
6. | 433-2806 | [2] | BRACKET AS | |
7. | 7X-2563 M | [8] | BOLT (M20X2.5X60-MM) | |
8. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
9. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
10. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
11. | 8T-6430 M | [8] | BOLT (M20X2.5X50-MM) | |
M | METRIC PART |
#KEBP03930224
364-2367: FRAME GP-FRONT
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 077-6627 M | [2] | SCREW-DRIVE (NO 12X12.7-MM) | |
2. | 231-1942 | [1] | LOCKPIN | |
3. | 326-3829 | [1] | PIN | |
4. | 442-2333 | [1] | FRAME AS-FRONT | |
5. | 425-9559 | [1] | GRILL | |
6. | 432-4684 | [1] | COVER AS | |
8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | ||
7. | 432-4685 | [1] | PLATE | |
8. | 095-1250 M | [1] | NUT-WING (M8X1.25-THD) | |
9. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
10. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
11. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
12. | 341-0971 E | CHAIN (26-CM) | ||
13. | 169-4930 E | SEAL (10-CM EACH) | ||
14. | 367-7187 E | SEAL (27.5-CM EACH) | ||
14A. | 367-7187 E | SEAL (14-CM) | ||
14B. | 367-7187 E | SEAL (29-CM) | ||
15. | 9X-6267 E | SEAL-TRIM (8-CM EACH) | ||
16. | 571-7925 | [1] | PLATE | |
17. | 571-7926 | [1] | SPACER | |
18. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
19. | 344-5673 M | [2] | NUT (M6X1-THD) | |
20. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
E | ORDER BY THE CENTIMETER | |||
M | METRIC PART |
#KEBP03930225
364-2368: FRAME GP-REAR
Parts for your CB-22B COMPACTOR:
CATERPILLAR SIS#KEBP03930226
364-2370: HITCH GP-OSCILLATING
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6V-1506 | [1] | FITTING-GREASE | |
2. | 081-2647 | [1] | SEAL | |
3. | 081-2719 | [1] | BEARING | |
4. | 081-2726 | [1] | WASHER | |
5. | 081-2747 | [1] | SEAL | |
6. | 081-2804 | [1] | WASHER | |
7. | 081-2911 | [3] | PLUG | |
8. | 215-6191 Y | [2] | BEARING GP-SELF-ALIGNING | |
9. | 364-6223 | [1] | AXLE | |
10. | 364-6224 | [1] | HITCH | |
11. | 364-7066 | [2] | PLATE AS | |
(EACH INCLUDES) | ||||
355-8941 M | [2] | NUT-WELD (M16X2-THD) | ||
12. | 380-9852 | [1] | BEARING-TAPERED ROLLER | |
13. | 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | |
14. | 7X-2554 M | [8] | BOLT (M16X2X70-MM) | |
15. | 8T-7338 M | [1] | BOLT (M16X2X45-MM) | |
16. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP03930227
420-4996: HOOD GP
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 081-2524 | [2] | HANDLE | |
2. | 170-0830 | [1] | PLATE | |
3. | 172-3185 | [1] | LATCH AS | |
158-7799 | [1] | LATCH | ||
4. | 369-8715 | [1] | LAMP GP-MARKER (LH) | |
4A. | 369-8715 | [1] | LAMP GP-MARKER (RH) | |
(EACH LAMP GP INCLUDES) | ||||
226-4560 | [1] | LAMP (12-VOLT, 21-WATT) | ||
5. | 420-3334 | [1] | BRACKET | |
6. | 428-6640 | [1] | BRACKET AS | |
7T-1099 | [2] | LINK | ||
8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
428-6636 | [1] | GRILL | ||
10. | 438-5418 | [1] | LAMP GP-MARKER (LH) | |
10A. | 438-5418 | [1] | LAMP GP-MARKER (RH) | |
(EACH LAMP GP INCLUDES) | ||||
7M-9957 | [1] | LAMP (12-VOLT, 7.5-WATT) | ||
11. | 096-6166 | [18] | WASHER-HARD (4.5X9X1-MM THK) | |
12. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
14. | 3T-0851 M | [2] | LOCKNUT (M5X0.8-THD) | |
15. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
16. | 5C-8312 M | [6] | NUT (M4X0.7-THD) | |
17. | 8C-8451 M | [2] | BOLT (M6X1X40-MM) | |
18. | 135-2370 M | [2] | BOLT (M5X0.8X25-MM) | |
19. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
20. | 8T-4224 | [16] | WASHER-HARD (8.8X16X2-MM THK) | |
21. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
22. | 5P-7483 H | SEAL (1.2-DM EACH) | ||
22A. | 5P-7483 H | SEAL (0.35-DM EACH) | ||
23. | 367-7189 E | SEAL (16-CM EACH) | ||
24. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
25. | 116-6952 M | [6] | BOLT (M4X0.7X10-MM) | |
26. | 446-2858 | [1] | PLATE | |
27. | 420-3344 | [1] | HOOD AS | |
420-3341 | [2] | GRILL | ||
420-3343 | [1] | HOOD AS | ||
E | ORDER BY THE CENTIMETER | |||
H | ORDER BY THE DECIMETER | |||
M | METRIC PART |
#KEBP03930228
364-2372: HOOD GP-ENGINE
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 246-2641 | [1] | PADLOCK GP | |
5P-8500 | [1] | KEY | ||
2. | 135-5049 | [1] | CABLE AS | |
5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
3. | 291-4374 | [1] | PIN | |
4. | 342-6093 | [2] | STUD-BALL | |
5. | 387-0365 | [4] | COVER-TERMINAL | |
6. | 420-4996 Y | [1] | HOOD GP | |
7. | 428-0072 | [1] | BLOCK | |
8. | 432-8877 | [1] | SUPPORT-HOOD | |
9. | 439-2207 | [1] | SPRING AS-GAS (ENGINE HOOD) | |
10. | 445-0490 | [1] | BRACKET AS (LH) | |
11. | 445-0491 | [1] | BRACKET AS (RH) | |
(EACH BRACKET AS INCLUDES) | ||||
[1] | CONNECTOR | |||
12. | 445-0931 | [1] | CABLE | |
13. | 446-0280 | [2] | BRACKET | |
14. | 099-3649 M | [4] | BOLT (M8X1.25X40-MM) | |
15. | 3T-0851 M | [2] | LOCKNUT (M5X0.8-THD) | |
16. | 4B-4274 | [2] | WASHER (5.5X13X1.2-MM THK) | |
17. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
18. | 5P-4116 | [14] | WASHER-HARD (8.8X20.5X2-MM THK) | |
19. | 7W-3447 | [1] | SPACER (10.2X19.05X10.2-MM THK) | |
21. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
22. | 8T-0352 M | [2] | BOLT (M5X0.8X45-MM) | |
23. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
24. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
25. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
26. | 8T-7547 M | [2] | BOLT (M8X1.25X30-MM) | |
27. | 9R-2807 | [2] | CLIP (RETAINER) | |
28. | 9R-3067 | [2] | PIN | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#KEBP03930229
364-2373: SCRAPER GP-DRUM
Parts for your CB-22B COMPACTOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7G-1251 | [4] | SPRING | |
2. | 178-2593 | [4] | BUMPER | |
3. | 297-1950 | [2] | SCRAPER AS | |
(EACH INCLUDES) | ||||
8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | ||
4. | 434-4042 | [2] | HINGE AS (REAR RH) | |
5. | 455-2362 | [1] | HINGE AS (RH) | |
6. | 455-2361 | [1] | HINGE AS (LH) | |
7. | 5C-7261 M | [8] | NUT (M8X1.25-THD) | |
8. | 5P-4116 | [16] | WASHER-HARD (8.8X20.5X2-MM THK) | |
9. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
10. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
11. | 8T-7547 M | [8] | BOLT (M8X1.25X30-MM) | |
M | METRIC PART |
Information:
POWER TRAIN
PUMP GP
Operation and Maintenance Manual
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications
Systems Operation
Location of Hydraulic Components (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
Hydraulic Schematic (Propel System)
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Testing and Adjusting
Piston Pump Neutral (Mechanical) - Test and Adjust
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
Flushing Valve (Propel Pump) - Test
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
Piston Pump Control Linkage - Test and Adjust
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
CB22B, CB24B, CC24B AND CB32B Vibratory Utility Compactor Propel Systems
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}