HYDRAULIC SYSTEM
MOTOR GPPOWER TRAIN
CONTROL GPHYDRAULIC SYSTEM
LINES GP-PROPELPOWER TRAIN
AXLE GPDRIVE GP-FINAL
CARRIER GP-PLANETARY
WHEEL GP
BRAKING SYSTEM
BRAKE GPHYDRAULIC SYSTEM
MOTOR GP#KEBP36550040
078-0590: MOTOR GP
HYDRAULIC MOTOR
PART NO. 780590
PART NO. 780590
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-0806 P | [ 1] | Housing | |
| 1. | 7X-5528 Q | [ 1] | Housing | |
| 2. | 7X-5519 | [ 2] | Ring, piston | |
| 3. | 7X-5524 N | [ 1] | Piston, servo | |
| 3. | 7X-5525 O | [ 1] | Piston, servo | |
| 4. | 7X-5516 | [ 1] | Spring, servo | |
| 5. | 7X-5466 | [ 1] | Nut, special | |
| 6. | 7X-5526 N | [ 1] | Stop, servo - adjustable | |
| 6. | 7X-5527 O | [ 1] | Stop, servo | |
| 7. | 7X-5465 | [ 8] | Bolt | |
| 8. | 9X-0807 P | [ 1] | Cover, servo | |
| 8. | 7X-5522 S | [ 1] | Cover, servo | |
| 8. | 7X-5523 O | [ 1] | Cover, servo | |
| 9. | 7X-5426 | [ 1] | Plug | |
| 10. | 7X-5498 P | [ 1] | Gasket, servo cover | |
| 10. | 7X-5517 Q | [ 2] | Gasket, servo cover | |
| 11. | 9X-0808 P | [ 1] | Stop | |
| 11. | 7X-5521 S | [ 1] | Stop | |
| 11. | 7X-5529 O | [ 1] | Seat, spring | |
| 12. | 7X-5478 | [ 1] | Pin, spring | |
| 13. | 7X-5486 | [ 1] | Gasket, front cover | |
| 14. | 7X-5468 | [ 1] | Bearing, needle | |
| 15. | 7X-5513 | [ 1] | Plate, motor valve | |
| 16. | 7X-5469 | [ 1] | Ring, retaining | |
| 17. | 7X-5470 | [ 1] | Washer | |
| 18. | 7X-5471 | [ 1] | Spring, cylinder block | |
| 19. | 7X-5472 | [ 1] | Washer | |
| 20. | 7X-5497 | [ 1] | Block, cylinder | |
| 21. | 7X-5474 | [ 3] | Pin, slipper hold down | |
| 22. | 7X-5473 | [ 1] | Retainer | |
| 23. | 7X-5477 | [ 1] | Guide, retainer | |
| 24. | 7X-5476 | [ 1] | Guide, slipper | |
| 25. | 7X-5475 | [ 7] | Piston assy. | |
| 26. | 7X-5515 | [ 2] | Bearing, journal | |
| 27. | 7X-5483 | [ 2] | Pin, spring | |
| 28. | 7X-5514 | [ 1] | Swashplate, variable | |
| 29. | 7X-5481 | [ 2] | Ring, retaining | |
| 30. | 7X-5433 | [ 1] | Seal, lip | |
| 31. | 7X-5482 | [ 2] | Ring | |
| 32. | 7X-5480 | [ 1] | Bearing | |
| 33. | 7X-5499 | [ 6] | Screw, 12 pt. hd. | |
| 34. | 7X-5496 | [ 1] | Cover, front | |
| 35. | 7X-5479 | [ 1] | Screw | |
| 36. | 7X-5485 | [ 1] | Bearing, sleeve | |
| 37. | 7X-5484 | [ 1] | Pin | |
| 38. | 7X-5520 | [ 1] | Shaft, motor | |
| 39. | 7X-5489 | [ 1] | Pin | |
| 40. | 9X-0809 P | [ 1] | Cover, servo | |
| 40. | 9X-0810 Q | [ 1] | Cover, servo | |
| 41. | 7X-5463 | [ 1] | Plug | |
| 42. | 9X-0811 | [ 1] | Stop | |
| 43. | 9X-0812 | [ 1] | Nut, adjusting | |
| 44. | 9X-0813 | [ 1] | Ring, snap | |
| USED ON MOTORS WITH MANUFACTURED DATES OF 86-42 AND ABOVE. (SEE METAL TAG ON HYDRAULIC MOTOR.) | ||||
| USED ON MOTORS WITH MANUFACTURED DATES OF 84-31 THRU 86-41. (SEE METAL TAG ON HYDRAULIC MOTOR.) | ||||
| USED ON MOTORS WITH MANUFACTURED DATES OF 87-49 AND ABOVE. (SEE METAL TAG ON HYDRAULIC MOTOR.) | ||||
| USED ON MOTORS WITH MANUFACTURED DATES OF 87-48 AND BELOW. (SEE METAL TAG ON HYDRAULIC MOTOR.) | ||||
| USED ON MOTORS WITH MANUFACTURED DATES OF 86-42 THRU 87-48. (SEE METAL TAG ON HYDRAULIC MOTOR.) | ||||
#KEBP36550041
PROPEL CONTROL ASSEMBLY
PROPEL CONTROL ASSEMBLY
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-5128 | [ 1] | Pin, cotter | |
| 2. | 077-3204 | [ 1] | Pin, pivot | |
| 3. | 077-2995 | [ 2] | Pivot, cable end | |
| 4. | 4B-4277 | [ 4] | Washer, flat 5/16" | |
| 5. | 7X-5230 | [ 1] | Bracket, neutral switch | |
| 6. | 077-3008 K | [ 2] | B. 1/4 N.C. x 1 1/4" | |
| 7. | 7X-5221 | [ 1] | Mount, neutral switch | |
| 8. | 077-3217 | [ 1] | Switch, neutral start | |
| 9. | 7X-5166 | [ 1] | Mount, link | |
| 10. | 7X-5147 | [ 2] | Spacer | |
| 11. | 7X-5220 | [ 1] | Link, propel | |
| 12. | 077-4430 K | [ 2] | B. 1/4 N.C. x 1 3/4" | |
| 13. | 077-3408 K | [ 1] | B. 5/16 N.C. x 1 1/4" | |
| 14. | 4L-6454 | [ 2] | B. 3/8 N.C. x 1" | |
| 15. | 077-5011 | [ 1] | Cable, control | |
| 17. | 077-9659 | [ 1] | Nut, 1/2 N.F.E.S. | |
| 18. | 077-3463 | [ 2] | Bushing, sleeve | |
| 19. | 7X-5213 | [ 1] | Lever, control | |
| 20. | 077-3711 K | [ 1] | B. 1/2 N.F. x 1 1/4" | |
| 21. | 077-4563 | [ 1] | Plunger | |
| 22. | 077-3942 | [ 1] | Nut, hex jam 1/2 N.C. | |
| 23. | 077-3380 | [ 1] | Knob | |
| 24. | 077-7934 K | [ 1] | B. 1/4 N.C. x 1/2" | |
| 25. | 077-4670 | [ 1] | Nut, 1/4 N.F. | |
| 26. | 077-4829 | [ 1] | Washer, lock | |
| 27. | 7X-5383 | [ 2] | Washer, Fender | |
| 28. | 9X-0682 | [ 1] | Washer, Belleville | |
| FOR WASHER AND NUT PART NUMBERS SEE PAGE 58. | ||||
#KEBP36550042
PROPEL SYSTEM LINES AND FITTINGS
PROPEL SYSTEM LINES AND FITTINGS
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-5331 J | [ 1] | Elbow 90 degrees w/o-ring | |
| 2. | 7X-5691 | [ 1] | Hose assy. | |
| 3. | 7X-5199 | [ 1] | Hose assy. | |
| 4. | 7X-5327 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 5. | 7X-5325 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 6. | 7X-5299 J | [ 1] | Adapter w/o-ring | |
| 8. | 7X-5169 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 9. | 7X-5326 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 10. | 7X-5298 J | [ 2] | Adapter w/o-rings | |
| 11. | 7X-5379 J | [ 2] | Tee w/o-rings | |
| 12. | 7X-5233 | [ 1] | Hose assy. | |
| 13. | 7X-5217 | [ 1] | Hose assy. | |
| 14. | 7X-5216 | [ 1] | Hose assy. | |
| 15. | 7X-5232 | [ 1] | Hose assy. | |
| 16. | 7X-5231 | [ 1] | Hose assy. | |
| 17. | 7X-5327 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 18. | 7X-5328 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 19. | 7X-5319 J | [ 1] | Elbow 45 degrees w/o-rings | |
| 20. | 7X-5320 J | [ 1] | Elbow 45 degrees w/o-rings | |
| 21. | 7X-5330 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 22. | 7X-5187 | [ 1] | Hose assy. | |
| 23. | 7X-5302 J | [ 1] | Adapter w/o-rings | |
| 24. | 7X-5335 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 25. | 7X-5186 | [ 1] | Hose assy. | |
| 26. | 7X-5331 J | [ 2] | Elbow 90 degrees w/o-rings | |
| 28. | 7X-5234 | [ 1] | Hose assy. | |
| FOR O-RING PART NUMBERS SEE PAGE 57. | ||||
#KEBP36550043
PRESSURE CHECK SYSTEM LINES AND FITTINGS
PRESSURE CHECK SYSTEM LINES AND FITTINGS
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2. | 7X-5204 | [ 1] | Hose assy. | |
| 3. | 7X-5209 | [ 1] | Hose assy. | |
| 4. | 7X-5293 J | [ 1] | Adapter w/o-rings | |
| 5. | 7X-5329 J | [ 1] | Elbow 90 degrees w/o-rings | |
| 6. | 7X-5182 | [ 2] | Hose assy. | |
| 7. | 7X-5293 J | [ 1] | Adapter w/o-rings | |
| 8. | 6V-3965 N | [ 6] | Coupling, quick disconnect | |
| 8. | 7X-5315 O | [ 6] | Coupling, quick disconnect | |
| 9. | 7X-5308 | [ 6] | Cap, dust | |
| 10. | 7X-5323 J | [ 1] | Elbow 90 degrees w/o-ring | |
| 11. | 7X-5300 J | [ 2] | Adapter w/o-ring | |
| 13. | 082-2792 J | [ 4] | Plug w/o-ring | |
| 14. | 7X-5359 N | [ 6] | O-ring | |
| FOR O-RING PART NUMBERS SEE PAGE 57. | ||||
| USED ON S/N 1XF48-UP. | ||||
| USED ON S/N 1XF1 THRU 1XF47. | ||||
#KEBP36550044
AXLE MOUNTING ASSEMBLY
AXLE MOUNTING ASSEMBLY
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP36550045
AXLE ASSEMBLY
AXLE ASSEMBLY
PART OF 7X5281
PART OF 7X5281
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 078-0700 | [ 1] | Differential, no-spin | |
| 2. | 077-4790 | [ 12] | Bolt, case to gear | |
| 3. | 078-0704 | [ 1] | Bevel gear & pinion assy. | |
| 4. | 7X-5623 | [ 1] | Case assy., differential | |
| 5. | 077-4792 | [ 12] | Nut | |
| 6. | 077-4791 | [ 12] | Washer | |
| 7. | 077-6769 | [ 1] | Gasket | |
| 8. | 077-4791 | [ 11] | Washer | |
| 9. | 077-4792 | [ 11] | Nut | |
| 10. | 078-0699 | [ 1] | Breather | |
| 11. | 7X-5610 | [ 2] | Seat, upper spring | |
| 12. | 7X-5609 | [ 2] | Seat, lower spring | |
| 13. | 7X-5622 J | [ 1] | Cover and tube assy. | |
| 14. | 7X-5600 | [ 1] | Plug, differential | |
| 15. | 7X-5597 | [ 1] | Block, thrust | |
| 16. | 7X-5598 | [ 1] | Pin | |
| 17. | 077-7649 | [ 1] | Ring, snap | |
| 18. | 077-7648 | [ 1] | Bearing pinion | |
| 19. | 077-8738 | [ 1] | Cone, bearing | |
| 20. | 077-8739 | [ 1] | Cup, bearing | |
| 21. | 7X-5607 | [ 1] | Cage, pinion bearing | |
| 22. | 078-0712 B | Spacer, pinion bearing .456" | ||
| 23. | 078-0713 B | Spacer, pinion bearing .475" | ||
| 24. | 077-8739 | [ 1] | Cup, bearing | |
| 25. | 077-8738 | [ 1] | Cone, bearing | |
| 26. | 7X-5606 | [ 1] | Washer | |
| 27. | 7X-5605 | [ 2] | Nut | |
| 28. | 077-7650 | [ 1] | Washer | |
| 29. | 7X-5596 | [ 1] | Dowel | |
| 30. | 7X-5608 | [ 1] | Gasket, liquid (5 oz. tube) | |
| 31. | 7X-5624 K | [ 1] | Carrier and tube assy. | |
| 32. | 7X-5600 | [ 1] | Plug | |
| 33. | 7X-5602 | [ 11] | Bolt | |
| 34. | 077-7651 | [ 2] | Cone, bearing | |
| 35. | 077-7652 | [ 2] | Cup, bearing | |
| 36. | 7X-5599 | [ 8] | Bolt | |
| 37. | 077-4314 | [ 8] | Washer | |
| USE AS REQUIRED. | ||||
| INCLUDES ITEMS 11, 12, 14-16, 35. | ||||
| INCLUDES ITEMS 11, 12, 32, 35. | ||||
#KEBP36550046
REDUCTION CASE ASSEMBLY
REDUCTION CASE ASSEMBLY
PART OF 7X5281
PART OF 7X5281
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 078-0708 | [ 1] | Gear, reduction drive | |
| 2. | 078-0709 | [ 2] | Bearing, input gear | |
| 3. | 078-0710 | [ 1] | Gear, input | |
| 4. | 078-0711 | [ 1] | Ring, snap | |
| 5. | J | [ 1] | Cover, reduction case | |
| 6. | 7X-5616 | [ 3] | Plug, oil fill and check | |
| 7. | 7X-5620 | [ 15] | Bolt | |
| 8. | 7X-5615 | [ 2] | Dowel | |
| 9. | 077-7645 | [ 6] | Nut | |
| 10. | 7X-5619 | [ 6] | Washer | |
| 11. | 7X-5612 | [ 15] | Washer | |
| 12. | 7X-5618 | [ 15] | Nut | |
| 13. | 7X-5617 | [ 6] | Stud | |
| 14. | 7X-5601 | [ 4] | Bolt | |
| 15. | 7X-5612 | [ 4] | Washer | |
| 16. | 7X-5613 | [ 1] | Cap, input shaft | |
| 17. | 082-2793 N | [ 1] | Case, reduction | |
| 17. | 7X-5614 O | [ 1] | Case, reduction | |
| 18. | 7X-5621 F | [ 1] | Key, reduction gear | |
| 19. | 098-4074 N | [ 1] | Plug, oil drain | |
| USED ON S/N 1XF29-UP. | ||||
| USED ON S/N 1XF1 THRU 1XF28. | ||||
| PART OF ITEM 17. | ||||
#KEBP36550047
WHEEL END ASSEMBLY
WHEEL END ASSEMBLY
PART OF 7X5281
PART OF 7X5281
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 077-3196 | [ 16] | Nut, wheel stud | |
| 2. | 7X-5611 | [ 2] | Hub assy. - wheel | |
| 3. | 078-0697 | [ 4] | Cup, hub bearing | |
| 4. | 077-2900 | [ 16] | Stud, wheel | |
| 5. | 078-0698 | [ 2] | Cone, inner hub bearing | |
| 6. | 078-0706 | [ 2] | Seal, hub bearing oil | |
| 7. | 078-0714 | [ 1] | Shaft, axle - short | |
| 8. | 078-0715 | [ 1] | Shaft, axle - long | |
| 9. | 078-0694 | [ 6] | Ring, snap | |
| 10. | 7X-5604 | [ 6] | Washer | |
| 11. | 077-8533 | [ 6] | Pinion, planetary | |
| 12. | 078-0707 | [ 6] | Shaft, planetary pinion | |
| 13. | 078-0703 J | [ 2] | Spider assy. - planetary | |
| 14. | 7X-5603 | [ 2] | Plug, planetary fill & drain | |
| 15. | 7X-5590 | [ 32] | Bolt | |
| 16. | 077-4791 | [ 32] | Washer | |
| 17. | 7X-5591 | [ 6] | Setscrew | |
| 18. | 7X-5593 | [ 2] | Button, thrust | |
| 19. | 078-0695 | [ 2] | Ring, snap | |
| 20. | 078-0696 | [ 2] | Gear, planetary sun | |
| 21. | 7X-5595 | [ 2] | Gear, ring | |
| 22. | 7X-5592 | [ 2] | Pin | |
| 23. | 7X-5594 | [ 2] | Nut, adjusting | |
| 24. | 078-0705 | [ 2] | Cone, outer hub bearing | |
| INCLUDES ITEMS 10, 12, 17 AND 18. | ||||
#KEBP36550048
WHEEL AND TIRE ASSEMBLY
WHEEL AND TIRE ASSEMBLY
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS#KEBP36550049
BRAKE SYSTEM
BRAKE SYSTEM
Parts for your CS-431B VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0277 K | [ 2] | B. 5/16 N.C. x 3 3/4" | |
| 2. | 078-0565 Y | [ 1] | Valve, brake | |
| 4. | 077-3150 | [ 10] | Stud, 3/4 N.F. x 2 7/8" | |
| 6. | 7X-5178 | [ 1] | Disc, brake | |
| 7. | 7X-5159 | [ 2] | Pin, caliper mounting | |
| 8. | 078-0603 Y | [ 1] | CALIPER ASSY., BRAKE | |
| 9. | 082-2794 | [ 1] | Bracket, brake mounting | |
| 10. | 0L-1169 K | [ 2] | B. 5/8 N.C. x 3 3/4" | |
| 11. | 077-3630 | [ 2] | Washer, flat - 5/8 hardened | |
| 12. | 077-9684 | [ 2] | Ring, retaining | |
| 13. | 3K-0453 | [ 10] | Nut, wheel | |
| 14. | 077-6033 | [ 2] | Nut 5/16 N.F.E.S. R/822795 | |
| 15. | 082-2796 | [ 2] | Screw, 5/16 N.F. X 1" set | |
| FOR WASHER AND NUT PART NUMBERS SEE PAGE 58. | ||||
| SEPARATE ILLUSTRATION. | ||||
Information:
HYDRAULIC SYSTEM
MOTOR GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Disassembly and Assembly
Hydraulic Propel Motor, Front (CS-433B & CP-433B)
CS-431B & CS-433B/CP-433B VIBRATORY COMPACTORS VEHICLE SYSTE
CS-431B & CS-433B/CP-433B VIBRATORY COMPACTORS VEHICLE SYSTE
