4P5512 GOVERNOR GP-UNIT INJECTOR TYPE 3. S/N 4TF5805-UP 1314852-PAGE 53.05 PART OF 7E7661 GOVERNOR-UNIT INJECTOR CS-583

FUEL SYSTEM

GOVERNOR GP

0. 4P-5512 GOVERNOR G
1. 100-6179 GOVERNOR G
2. 131-4852 GOVERNOR G
3. 4P-5503 GOVERNOR G
4. 7E-8794 DRIVE GP-G

CONTROL GP-GOVERNOR

5. 7E-9429 CONTROL GP

CONTROL GP-FUEL INJECTION

6. 7W-6989 CONTROL GP

GOVERNOR GP

7. 7W-4812 FASTENER G

PUMP GP-FUEL INJECTION

8. 107-7732 PUMP GP-UN
9. 7C-1500 PUMP GP-FU
0. INFORMATION

VIBRATORY COMPACTOR CS-583 VIBRATORY COMPACTOR 1EL
CS-583 VIBRATORY COMPACTOR 1EL00001-UP (MACHINE) POWERED BY 3116 ENGINE KEBP4128 CS-583 1EL (1993)

FUEL SYSTEM

GOVERNOR GP

7E-7661 GOVERNOR GP-UNIT INJECTOR

4P-5512 GOVERNOR GP-UNIT INJECTOR

100-6179 GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR

4P-5503 GOVERNOR GP-UNIT INJECTOR

7E-8794 DRIVE GP-GOV & TRANSFER PUMP

7W-4812 FASTENER GP-GOVERNOR

#KEBP41280090

4P-5512: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

4P5512 GOVERNOR GP-UNIT INJECTOR
TYPE 3. S/N 4TF5805-UP
1314852-PAGE 53.05
PART OF 7E7661 GOVERNOR-UNIT INJECTOR

c653744 KEBP4128

4P5512 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-4852 CY	[1]	GOVERNOR GP-UNIT INJECTOR
2.	4P-1574	[1]	CAM-TORQUE
3.	4P-2467	[1]	SPRING GP-GOVERNOR
		[1]	SPRING-LOW IDLE
		[1]	SPRING-HIGH IDLE
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#KEBP41280091

100-6179: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

1006179 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 56
PART OF 4P5512 GOVERNOR-UNIT INJECTOR

c560877 KEBP4128

1006179 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	4P-5676	[1]	CLEVIS
3.	4H-1641	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	4P-4985	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING
9.	7W-7362	[1]	PISTON-GOVERNOR SERVO
10.	4P-4983	[1]	SLEEVE
11.	9Y-1837	[1]	SPRING
12.	8T-7060	[1]	RING-RETAINING
13.	104-7039	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	7E-3215	[1]	LEVER AS
16.	Z	[1]	PIN
17.	Z	[2]	SWIVEL
18.	Z	[1]	LEVER
19.	7W-5594	[1]	SHAFT AS-PIVOT
20.	Z	[1]	PIN
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	7C-6592	[1]	ARBOR AS-TORQUE CAM
24.	8C-6775 M	[1]	SETSCREW-SOCKET
25.	7E-3216	[1]	BLOCK AS-BEARING
26.	6F-5933	[2]	BEARING-NEEDLE
27.	7E-3217	[1]	LEVER AS
28.	Z	[1]	SWIVEL
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	Z	[1]	PIN
33.	Z	[1]	LEVER-TORQUE
34.	7E-0155	[1]	SCREEN AS-FUEL INLET
35.	6V-8189	[1]	NUT
36.	7W-5614	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD
38.	7W-4313	[1]	WASHER
39.	6I-4514	[1]	HOUSING AS
40.	Z	[1]	SHAFT
41.	Z	[1]	PLUG
42.	8T-6702 M	[1]	SETSCREW-SOCKET
43.	5C-2874 M	[2]	NUT
44.	7C-6204	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD
48.	4P-3539	[1]	LEVER-THROTTLE
49.	8T-5435 M	[1]	BOLT
50.	101-7676	[1]	SETSCREW-HEX HEAD
51.	7C-4483	[1]	SCREEN AS
52.	6V-5100	[1]	SEAL-O-RING
53.	4P-4231	[1]	COVER-REAR
54.	Z	[1]	PLUG
55.	4P-3537	[1]	RING-TOLERANCE
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD
65.	7C-5541	[2]	TOE-FLYWEIGHT
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM
71.	4P-8947	[1]	RISER
72.	4P-8948	[1]	SEAT AS-SPRING INSERT
74.	7C-3776	[1]	PISTON AS
75.	4N-6407	[1]	SPOOL-DASHPOT
76.	4N-6406	[1]	RING-SPACER
77.	4N-6404	[1]	RING-RETAINING
78.	7W-5591	[1]	SEAT-GOVERNOR SPRING
79.	7C-5883 B	[7]	SHIM
80.	7C-5885	[1]	WASHER
81.	4P-4000	[1]	SPRING-LEVER
82.	7C-6205	[1]	PLUG
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#KEBP41280092

131-4852: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

1314852 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 56
PART OF 4P5512 GOVERNOR-UNIT INJECTOR

c702253 KEBP4128

1314852 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-1460	[1]	RING-RETAINING
2.	108-1612	[1]	CLEVIS
3.	6D-9953	[1]	PIN-SPRING
4.	7C-8854	[1]	PIN-CLEVIS
5.	115-2553	[1]	VALVE-GOVERNOR SERVO
6.	8C-3312	[1]	RING-RETAINING
7.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
8.	5P-9757	[1]	SEAL-O-RING (18.77MM ID)
9.	108-1613	[1]	PISTON-SERVO
10.	125-8158	[1]	SLEEVE-RACK CONTROL
11.	9Y-1837	[1]	SPRING
12.	8T-7060	[1]	RING-RETAINING
13.	117-9098	[1]	SLEEVE-LIMITING
14.	7N-2171	[1]	RING-RETAINING
15.	114-1803	[1]	LEVER AS
16.	Z	[1]	PIN
17.	Z	[2]	SWIVEL
18.	Z	[1]	LEVER
19.	7W-5594	[1]	SHAFT AS-PIVOT
20.	Z	[1]	PIN
21.	7C-5480	[1]	SPRING-TORSION
22.	7C-8640	[1]	SPRING-CAM
23.	123-6433	[1]	ARBOR AS-TORQUE CAM
24.	8T-8895 M	[1]	SETSCREW-SOCKET
25.	7E-3216	[1]	BLOCK AS-BEARING
26.	6F-5933	[2]	BEARING-NEEDLE
27.	7E-3217	[1]	LEVER AS
28.	Z	[1]	SWIVEL
29.	8C-8546 M	[9]	BOLT-SOCKET HEAD
30.	3P-3547	[1]	RING-RETAINING
31.	4P-5743	[1]	LEVER AS-LIMIT
32.	Z	[1]	PIN
33.	Z	[1]	LEVER-TORQUE
34.	7C-6205	[1]	PLUG
35.	6V-8189	[1]	NUT (5/16-18 THD)
36.	115-1192	[1]	SEAL-GOVERNOR HOUSING
37.	3T-0849 M	[6]	BOLT-SOCKET HEAD (7.59MM'ID)
38.	7W-4313	[1]	WASHER
39.	6I-4514	[1]	HOUSING AS
40.	2S-4078	[1]	SEAL-O-RING (37.46MM ID)
41.	4P-4000	[1]	SPRING-LEVER
42.	8T-6702 M	[1]	SETSCREW-SOCKET
43.	5C-2874 M	[2]	NUT (M5X.8 THD)
44.	7C-6204	[1]	PLUG
45.	7L-3386	[1]	SEAL-O-RING
46.	7C-5884	[1]	COVER-OIL SUMP
47.	6V-5213 M	[3]	BOLT-SOCKET HEAD
48.	4P-3539	[1]	LEVER-THROTTLE
49.	8T-5435 M	[1]	BOLT
50.	1N-3887	[1]	SETSCREW-SOCKET
51.	7C-4483	[1]	SCREEN AS
52.	6V-5100	[1]	SEAL-O-RING (53.64MM ID)
53.	4P-4231	[1]	COVER-REAR
54.	7C-5885	[1]	WASHER
55.	4P-3537	[1]	RING-TOLERANCE
56.	8T-0269 M	[3]	BOLT-SOCKET HEAD (M16X1X20MM)
57.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
58.	7C-5150	[1]	PIN
59.	4P-0737	[1]	SHAFT-RISER
60.	7C-5148	[1]	CARRIER-FLYWEIGHT
61.	9X-2547 M	[2]	SCREW-FLAT HEAD
62.	2S-7316	[2]	DOWEL
63.	6V-7699	[4]	WASHER-HARD (1.6MM THK)
64.	8C-8545 M	[4]	BOLT-SOCKET HEAD
65.	7C-5541	[2]	TOE-FLYWEIGHT
66.	7W-8993	[2]	WEIGHT
67.	8C-5061	[1]	RING-RETAINING
68.	7C-2743	[2]	RACE
69.	7W-5561	[1]	BEARING-THRUST
70.	7W-1440 B	[8]	SHIM
71.	4P-8947	[1]	RISER
72.	4P-8948	[1]	SEAT AS-SPRING
73.		[1]	INSERT
74.	7C-3776	[1]	PISTON AS
75.	4N-6407	[1]	SPOOL-DASHPOT
76.	4N-6406	[1]	RING-SPACER
77.	4N-6404	[1]	RING-RETAINING
78.	7W-5591	[1]	SEAT-GOVERNOR SPRING
79.	7C-5883 B	[7]	SHIM
80.	109-4587	[1]	RING
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION
	Z		NOT SERVICED SEPARATELY

#KEBP41280093

4P-5503: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

4P5503 GOVERNOR GP-UNIT INJECTOR
7E8794-PAGE 56
PART OF 4P5512 GOVERNOR-UNIT INJECTOR

c524481 KEBP4128

4P5503 GOVERNOR GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5157	[1]	HOUSING AS-GOVERNOR
2.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
3.	8C-8546 M	[9]	BOLT-SOCKET HEAD
4.	7E-3216	[1]	BLOCK AS-BEARING
	6F-5933	[2]	BEARING-NEEDLE
5.	9X-6002 M	[1]	SETSCREW
6.	7C-6205	[1]	PLUG
7.	5C-2874 M	[3]	NUT
8.	7C-4483	[1]	SCREEN AS
9.	7C-5541	[2]	TOE-FLYWEIGHT
10.	8T-5435 M	[1]	BOLT
11.	7C-5885	[1]	WASHER
12.	3T-0849 M	[6]	BOLT-SOCKET HEAD
13.	7E-5785	[1]	SLEEVE-LIMITING
14.	8C-6775 M	[1]	SETSCREW-SOCKET
15.	4P-5676	[1]	CLEVIS
16.	4P-4000	[1]	SPRING-LEVER
17.	7C-6204	[1]	PLUG
18.	8T-6702 M	[1]	SETSCREW-SOCKET
19.	7W-4313	[1]	WASHER
20.	8T-7060 M	[1]	RING-RETAINING
21.	4P-4983	[1]	SLEEVE
22.	9Y-1837	[1]	SPRING
23.	4P-4985	[1]	VALVE-GOVERNOR SERVO
24.	4P-5743	[1]	LEVER AS-LIMIT
25.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
26.	5P-9757	[1]	SEAL-O-RING
27.	4H-1641	[1]	PIN-SPRING
28.	7W-7362	[1]	PISTON-GOVERNOR SERVO
29.	8C-3312	[1]	RING-RETAINING
30.	7C-5148	[1]	CARRIER-FLYWEIGHT
31.	2S-7316	[2]	DOWEL
32.	6V-7699	[4]	WASHER-HARD
33.	8C-8545 M	[4]	BOLT-SOCKET HEAD
34.	7W-8993	[2]	WEIGHT
35.	4P-8947	[1]	RISER
36.	4P-0737	[1]	SHAFT-RISER
37.	7W-5591	[1]	SEAT-GOVERNOR SPRING
38.	6V-5213 M	[3]	BOLT-SOCKET HEAD
39.	7L-3386	[1]	SEAL-O-RING
40.	7C-5884	[1]	COVER-OIL SUMP
41.	4P-4231	[1]	COVER-REAR
42.	6V-5100	[1]	SEAL-O-RING
43.	7C-5883 B	[7]	SHIM
44.	7C-3776	[1]	PISTON AS
	4N-6404	[1]	RING-RETAINING
	4N-6407	[1]	SPOOL-DASHPOT
	4P-8694	[1]	RING-SPACER
45.	4P-8948	[1]	SEAT AS-SPRING
46.	7W-1440	[8]	SHIM
47.	7C-2743	[2]	RACE
48.	7W-5561	[1]	BEARING-THRUST
49.	7W-5614	[1]	SEAL-GOVERNOR HOUSING
50.	8C-5061	[1]	RING-RETAINING
51.	7C-5150	[1]	PIN
52.	7C-5480	[1]	SPRING-TORSION
53.	7C-8640	[1]	SPRING-CAM
54.	7W-5594	[1]	SHAFT AS-PIVOT
	8C-5899	[1]	PIN-SPRING
55.	7C-6592	[1]	ARBOR AS-TORQUE CAM
	7W-5137	[1]	ARBOR-TORQUE CAM
56.	7E-3217	[1]	LEVER AS
57.	3P-3547	[1]	RING-RETAINING
58.	7E-3215	[1]	LEVER AS
59.	8T-0269	[3]	BOLT-SOCKET HEAD
60.	7N-2171	[1]	RING-RETAINING
61.	9X-2547 M	[2]	SCREW-FLAT HEAD
62.	4P-3539	[1]	LEVER-THROTTLE
63.	4P-3537	[1]	RING-TOLERANCE
64.	7E-0155	[1]	SCREEN AS-FUEL INLET
65.	7C-8854	[1]	PIN-CLEVIS
66.	8T-1460 M	[1]	RING-RETAINING
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION
	M		METRIC PART

#KEBP41280094

7E-8794: DRIVE GP-GOV & TRANSFER PUMP

DRIVE GP-GOV & TRANSFER PUMP

7E8794 DRIVE GP-GOV & TRANSFER PUMP
PART OF 4P5503, 1006179 & 1314852 GOVERNOR-UNIT INJECTOR

c572096 KEBP4128

7E8794 DRIVE GP-GOV & TRANSFER PUMP Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5612	[1]	HOUSING AS-FRONT
	7S-5005	[2]	DOWEL
	7S-6798	[1]	SEAL-LIP TYPE
	9Y-3107 M	[1]	BOLT
2.		[1]	SPRING-TORSION
3.	4P-9490	[1]	SHAFT AS-SHUT-OFF
	4P-9489	[1]	SHAFT-SHUT OFF
	4P-9491	[1]	SHIM-SHUT OFF
	4P-9492	[1]	BRACKET-SHAFT
	4P-9493	[1]	LEVER-SHUT OFF
	4P-9494	[1]	SPRING-SHUT OFF
	105-0585	[1]	LEVER-SHUT-OFF
	9X-8902 M	[4]	BOLT-SOCKET HEAD
4.	6V-5213 M	[2]	BOLT-SOCKET HEAD
5.	7W-5615	[1]	SLEEVE AS-PUMP
	1W-0565	[1]	RING-RETAINING
6.	4D-9986	[2]	SEAL-O-RING
7.	4P-3953	[1]	PISTON AS
8.	7E-0156	[1]	FITTING-INLET
9.	4P-4224	[1]	COVER-TRANSFER PUMP
10.	7C-5294	[1]	SPRING
11.	8C-6364 M	[3]	BOLT-SOCKET HEAD
12.	7E-9898	[1]	CONNECTOR-ORIFICE
13.	3J-1907	[2]	SEAL-O-RING
14.	7W-7383	[2]	VALVE AS-CHECK
15.	7E-3943	[1]	LEVER-CONTROL
16.	9Y-9846 M	[1]	SCREW-LOCATING
17.	6L-8598	[2]	RING-RETAINING
18.	4P-3538	[1]	SHAFT-THROTTLE
19.	7E-3944	[1]	SLEEVE
	M		METRIC PART

#KEBP41280095

7E-9429: CONTROL GP-GOVERNOR

CONTROL GP-GOVERNOR

7E9429 CONTROL GP-GOVERNOR

c519979 KEBP4128

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6I-0484	[1]	LEVER AS
2.	6I-0483	[2]	SPRING
3.	6I-0482	[1]	LEVER AS
4.	5C-9553 M	[1]	BOLT
	6V-7646	[1]	WASHER-HARD
5.	8C-8451 M	[1]	BOLT
	8T-2228	[1]	WASHER-HARD
	M		METRIC PART

#KEBP41280096

7W-6989: CONTROL GP-FUEL INJECTION

CONTROL GP-FUEL INJECTION

7W6989 CONTROL GP-FUEL INJECTION

c617616 KEBP4128

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-7459	[1]	CONTROL AS
	5C-8312 ZM	[6]	NUT (M4X0.7 THD)
	6V-5698 ZM	[4]	SCREW-BUTTON HEAD (M4X0.7X10MM)
	7X-7889 ZM	[5]	SETSCREW-SOCKET
	8C-4982 ZM	[7]	BOLT-SOCKET HEAD (M4X0.7X20 MM)
	8T-7564 Z	[2]	RING-RETAINING
	102-7455 ZM	[1]	SETSCREW
2.	6V-5683 M	[4]	BOLT (M6X1X16MM)
	M		METRIC PART
	Z		NOT SERVICED SEPARATELY

#KEBP41280097

7W-4812: FASTENER GP-GOVERNOR

FASTENER GP-GOVERNOR

7W4812 FASTENER GP-GOVERNOR
PART OF 7E7661 GOVERNOR-UNIT INJECTOR

c476378 KEBP4128

7W4812 FASTENER GP-GOVERNOR Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-3872 JC	[1]	SLEEVE
2.	9M-1974	[3]	WASHER
3.	6V-5218 M	[3]	BOLT
4.	9Y-5295 C	[1]	TUBE-GOVERNOR CONNECTION
5.	6F-6673	[1]	SEAL-O-RING
6.	7C-3839	[1]	CLIP-SPRING
7.	7E-0844	[1]	SEAL
8.	1T-1068	[1]	SEAL-O-RING

			J-INSTALL SLEEVE
			IN FRONT HOUSING
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#KEBP41280098

107-7732: PUMP GP-UNIT INJECTION

PUMP GP-UNIT INJECTION

1077732 PUMP GP-FUEL INJECTION

c607177 KEBP4128

1077732 PUMP GP-UNIT INJECTION Parts scheme

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-0849 M	[1]	BOLT-SOCKET HEAD
2.	107-7733	[1]	INJECTOR GP-FUEL
3.	114-8718	[1]	SEAL-O-RING
4.	125-8274	[1]	SEAL-O-RING
	M		METRIC PART

#KEBP41280099

7C-1500: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

7C1500 PUMP GP-FUEL INJECTION

c491158 KEBP4128

For full view, you need register

Parts for your CS-583 VIBRATORY COMPACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-0849 M	[1]	BOLT-SOCKET HEAD
2.	7E-8727 R	[1]	INJECTOR GP-FUEL
3.	6V-6228	[1]	SEAL-O-RING
4.	032-8970	[1]	SEAL-O-RING
	M		METRIC PART
	R		REMFG PART MAY BE AVAILABLE

Information:

FUEL SYSTEM

GOVERNOR GP

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}
The Proper Procedures for Troubleshooting Mechanical Unit Injectors (MUI){1251, 1264, 1280, 1288, 1290}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly

Specifications

Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Specification
3114, 3116 and 3126 MUI Engine Governors

Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Service Letter-China

Service Letter-Asia

Systems Operation

Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors

Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors

Information Release Memo

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

Testing and Adjusting

Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors

Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors

Governor - Adjust
3114, 3116, and 3126 Engines

Disassembly and Assembly

Governor & Fuel Transfer Pump
SUPPLEMENT FOR CS-583 VIBRATORY COMPACTOR (3116 ENGINE)

Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

Mechanical Unit Injector Identification Code{1290}
1995/12/18

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01

New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01

Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01

New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08

Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog CS-583 :

4P-5512 GOVERNOR GP-UNIT INJECTOR

7E-7661 GOVERNOR GP-UNIT INJECTOR

7W-8434 LINES GP-GOVERNOR OIL

7C-7345 MUFFLER GP

5E-6533 PIPE GP-EXHAUST

100-3157 HEATER GP-AIR INLET

7C-9756 AIR CLEANER GP

100-6179 GOVERNOR GP-UNIT INJECTOR

131-4852 GOVERNOR GP-UNIT INJECTOR

4P-5503 GOVERNOR GP-UNIT INJECTOR

7E-8794 DRIVE GP-GOV & TRANSFER PUMP

7E-9429 CONTROL GP-GOVERNOR

7W-6989 CONTROL GP-FUEL INJECTION

7W-4812 FASTENER GP-GOVERNOR

107-7732 PUMP GP-UNIT INJECTION

Truck sale:

USD $22,579

1993 CAT CS-583

BERGERAT MONNOYEUR
SAINT-DENIS, 93, France

$23,613 USD

CATERPILLAR CS583 1993
- COMPACTORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -