AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

107-1954 ROCKER ARM GP S/N 99C1019-UP PART OF 108-1551 VALVE MECHANISM GP PM-565B COLD PLANER


BASIC ENGINE
VALVE MECHANISM GP
CRANKSHAFT GP
MOUNTING GP-ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
PUMP GP-ENGINE OIL
FILLER GP-ENGINE OIL
FILTER GP-ENGINE OIL

COLD PLANER PM-565B COLD PLANER 8GS
 PM-565B Cold Planer 8GS00001-UP (MACHINE) POWERED BY 3408C Engine KEBP4132 PM-565B 8GS   (1997)

BASIC ENGINE

VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
127-8941 COVER GP-VALVE MECHANISM
ROCKER ARM GP
107-1954 ROCKER ARM GP
VALVE MECHANISM GP
108-1551 VALVE MECHANISM GP
 

#KEBP41320050
 

107-1954: ROCKER ARM GP

107-1954 ROCKER ARM GP
S/N 99C1019-UP
PART OF 108-1551 VALVE MECHANISM GP
i00089844 KEBP4132
1071954 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-2263 [2] RING-RETAINING  
2. 2N-7228 [2] WASHER (1X1.5X0.03-IN THK)  
3. 4N-5614 [2] ROCKER ARM AS  
4. 336-6781 [2] SCREW (3/8-24X4.78-IN)  
5. 9L-7712 [2] NUT (3/8-24-THD)  
6. 122-0163 [1] BRACKET-SHAFT  
7. 6V-3536 [2] DOWEL  
8. 135-3225 [1] SHAFT AS  
  2D-6642 F [2] BALL  
  F   NOT SHOWN
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#KEBP41320051
 

319-0785: SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
S/N 99C1019-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CCW ROTATION
i02958100 KEBP4132
3190785 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5868 J [1] SEAL-CRANKSHAFT (REAR)  
   
    CRANKSHAFT SEAL 366-6004 IS AVAILABLE FOR FLOODED CONDITIONS
  J   FOR USE WITH DRY CLUTCH APPLICATIONS
 

#KEBP41320052
 

319-7401: SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N 99C1019-UP
PART OF 1W-5010 CRANKSHAFT GP
FOR USE WITH CW ROTATION
i02957871 KEBP4132
3197401 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-5867 [1] SEAL-CRANKSHAFT (FRONT)  
 

#KEBP41320053
 

086-9546: SUPPORT GP-ENGINE

086-9546 SUPPORT GP-ENGINE
S/N 8GS1-UP
PART OF 140-1081 INSTALLATION AR-ENGINE
i00462122 KEBP4132
0869546 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-9930 [2] MOUNT AS  
2. 9W-6582 [2] SLEEVE  
3. 9W-6584 [2] WASHER (20.5X114X10-MM THK)  
4. 8C-8478 M [2] BOLT (M20X2.5X140-MM)  
  8T-4123 [4] WASHER (3.62X5.75X0.375-MM THK)  
  8T-4131 M [2] NUT (M20X2.5-THD)  
  M   METRIC PART
 

#KEBP41320054
 

108-2796: SUPPORT GP-ENGINE

108-2796 SUPPORT GP-ENGINE
S/N 99C1019-UP
FRONT
PART OF 138-8144 ENGINE AR, 215-0565 ENGINE AR-COMPLETE
i00148110 KEBP4132
1082796 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-3872 [1] SUPPORT-ENGINE  
2. 2H-6488 [2] BOLT (1/2-13X5-IN)  
3. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8S-9089 [6] BOLT (1/2-13X4.5-IN)  
5. 6N-9365 [1] BRACKET  
 

#KEBP41320055
 

140-0962: SUPPORT GP-ENGINE

140-0962 SUPPORT GP-ENGINE
S/N 8GS1-UP
PART OF 140-1081 INSTALLATION AR-ENGINE
i00499608 KEBP4132
1400962 SUPPORT GP-ENGINE Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 140-0963 [1] MOUNT AS-ENGINE  
2. 086-8679 [1] MOUNT AS  
3. 7X-0365 [12] BOLT (3/4-10X1.5-IN)  
4. 8T-4994 [12] WASHER-HARD (20X36.5X3.5-MM THK)  
5. 8C-3290 M [2] BOLT (M24X3X150-MM)  
6. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
7. 8T-4001 M [2] NUT (M24X3-THD)  
8. 9W-7388 [2] WASHER (26X144X12-MM THK)  
9. 6Y-9980 [2] MOUNT AS  
10. 9W-7385 [2] SLEEVE  
  M   METRIC PART
 

#KEBP41320056
 

108-1551: VALVE MECHANISM GP

108-1551 VALVE MECHANISM GP
S/N 99C1019-UP
PART OF 138-8144 ENGINE AR, 215-0564 ENGINE AR-CORE
i00093527 KEBP4132
1081551 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-1954 Y [8] ROCKER ARM GP  
2. 100-6889 [16] BRIDGE-VALVE  
3. 2P-9845 [8] BOLT (3/4-16X11.5-IN)  
  5H-1504 [8] WASHER-HARD (20X33.5X5-MM THK)  
4. 4W-5998 [16] PUSHROD AS  
5. 305-6843 [16] SPRING-GUIDE  
6. 422-3883 [16] LIFTER AS-VALVE  
7. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 0L-1143 [8] BOLT (3/8-16X2.5-IN)  
9. 116-7220 [8] SEAL-RECTANGULAR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#KEBP41320057
 

119-8583: FASTENER GP-OIL PUMP MOUNTING

119-8583 FASTENER GP-OIL PUMP MOUNTING -ENGINE
S/N 99C1019-UP
PART OF 138-8144 ENGINE AR, 215-0564 ENGINE AR-CORE
i00089899 KEBP4132
1198583 FASTENER GP-OIL PUMP MOUNTING Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [1] BOLT (3/8-16X2.5-IN)  
2. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 0S-1619 [2] BOLT (3/8-16X3-IN)  
 

#KEBP41320058
 

127-9373: FILLER GP-ENGINE OIL

127-9373 FILLER GP-ENGINE OIL
S/N 99C1019-UP
PART OF 138-8144 ENGINE AR, 215-0565 ENGINE AR-COMPLETE
i00519172 KEBP4132
1279373 FILLER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-0597 [1] TUBE AS  
2. 2N-8109 [1] CLAMP  
3. 6V-3831 [1] SEAL-O-RING  
4. 6N-2206 [1] CAP AS-FILLER  
5. 3F-6156 [1] HOOK  
 

#KEBP41320059
 

9Y-1911: FILTER GP-ENGINE OIL

9Y-1911 FILTER GP-ENGINE OIL
S/N 99C1019-UP
PART OF 138-8144 ENGINE AR, 215-0565 ENGINE AR-COMPLETE
i00166784 KEBP4132
9Y1911 FILTER GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your PM-565B COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1652 [1] BASE AS-OIL FILTER (ENGINE)  
  5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
  2P-4304 [2] STUD-HOLLOW  
  8J-6220 [1] SETSCREW-HEX SOCKET (3/8-16X0.375-IN)  
2. 2P-3761 [1] COVER  
3. 2P-3760 [1] GASKET  
4. 5P-8068 [1] SEAL-O-RING  
5. 3P-0650 [1] SEAL-O-RING  
6. 4B-4161 [5] SCREW-DRIVE (NO 6X3/8-IN)  
7. 2W-0219 [1] SHIELD  
8. 8S-9191 [2] BOLT (3/8-16X4-IN)  
9. 0S-1594 [5] BOLT (3/8-16X1-IN)  
10. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 4N-8150 [1] SPRING  
12. 1P-1367 [1] PLUNGER (RELIEF VALVE)  
13. 1R-1808 [2] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
14. 8C-3445 [1] CAP-DUST (ENGINE OIL FILTER)  
15. 8C-3446 [1] VALVE-SAMPLING (ENGINE OIL)  
16. 6V-5048 [1] SEAL-O-RING  
 

Information:

Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Technical Information Bulletin
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Failures of the 305-6843 Guide Spring on Certain Engines{1102, 1121, 1123, 1209}
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
3408E and 3412E Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
3408E and 3412E Engines for Caterpillar Built Machines
Disassembly and Assembly
Valve Mechanism Cover Base - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm - Assemble
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
3408E and 3412E Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
3408E and 3412E Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
3408E and 3412E Engines for Caterpillar Built Machines
Service Magazine
Be Sure To Use The Correct Inlet And Exhaust Valves In Engines Equipped With Valve Bridges That Do Not Ride On Dowels {1105,1121}
1998/02/16
Use the Correct Remanufactured Cylinder Heads and Valves {1101, 1105}
2006/03/13
A New Guide Spring for the Camshaft Lifter is Now Used {1102, 1121, 1123}
2010/09/23
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05

Caterpillar Parts SIS Catalog PM-565B :

PULLEY GP-FAN DRIVE
7R-9810 PULLEY GP-FAN DRIVE
PLUG GP-CYLINDER HEAD
124-4456 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER BLOCK
126-7278 PLUG GP-CYLINDER BLOCK
PISTON & ROD GP
4P-7472 PISTON & ROD GP
PISTON & ROD GP
4P-7472 PISTON & ROD GP
PISTON & ROD GP
192-8808 PISTON & ROD GP
PISTON & ROD GP
109-2823 PISTON & ROD GP
PAN GP-OIL
6I-3744 PAN GP-OIL
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
SUPPORT GP-ENGINE
086-9546 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
108-2796 SUPPORT GP-ENGINE
SUPPORT GP-ENGINE
140-0962 SUPPORT GP-ENGINE
VALVE MECHANISM GP
108-1551 VALVE MECHANISM GP
FASTENER GP-OIL PUMP MOUNTING
119-8583 FASTENER GP-OIL PUMP MOUNTING
FILLER GP-ENGINE OIL
127-9373 FILLER GP-ENGINE OIL

Truck sale:

2003 CAT PM-565B
USD $79,900 
2003 CAT PM-565B

Stoneman Motors LLC
CAT PM-565B
USD $84,900 
CAT PM-565B

Stoneman Motors LLC
2004 CAT PM-565B
USD $97,000 
2004 CAT PM-565B

USA Equipco
Hidalgo, Texas
2001 CAT PM-565B
USD $87,000 
2001 CAT PM-565B

USA Equipco
Hidalgo, Texas
CATERPILLAR PM-565B 1999
$99,500 USD 
CATERPILLAR PM-565B 1999
- COLD PLANERS
RANSOME CAT
Pennsylvania United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.