AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

349-4947 KIT-CUTTER BIT S/N 7FS1-UP FIELD INSTALLATION RM-350B RECLAIMER MIXER


IMPLEMENTS
CUTTER GP
CASE GP-CHAIN DRIVE
LINES GP
HYDRAULIC SYSTEM
LIFT GP

RECLAIMER MIXER RM-350B RECLAIMER MIXER 7FS
 RM-350B Reclaimer Mixer 7FS00001-UP (MACHINE) POWERED BY 3406C Engine KEBP4133 RM-350B 7FS   (1998)

IMPLEMENTS

CUTTER GP
KIT-CUTTER BIT
144-1238 KIT-CUTTER BIT
KIT-CUTTER BIT
222-7578 KIT-CUTTER BIT
KIT-CUTTER BIT
222-7579 KIT-CUTTER BIT
KIT-CUTTER BIT
238-3191 KIT-CUTTER BIT
KIT-CUTTER BIT
316-2327 KIT-CUTTER BIT
KIT-CUTTER BIT
342-1302 KIT-CUTTER BIT
KIT-CUTTER BIT
349-4946 KIT-CUTTER BIT
KIT-CUTTER BIT
349-4947 KIT-CUTTER BIT
KIT-CUTTER BIT
350-7199 KIT-CUTTER BIT
KIT-CUTTER BIT
351-2678 KIT-CUTTER BIT
 

#KEBP41330420
 

349-4947: KIT-CUTTER BIT

349-4947 KIT-CUTTER BIT
S/N 7FS1-UP
FIELD INSTALLATION
i05349001 KEBP4133
3494947 KIT-CUTTER BIT Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 349-4945 [2000] BIT AS-CUTTER  
 

#KEBP41330421
 

350-7199: KIT-CUTTER BIT

350-7199 KIT-CUTTER BIT -EXTREME SERVICE
S/N 7FS1-UP
FIELD INSTALLATION
i05349005 KEBP4133
3507199 KIT-CUTTER BIT Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 350-7198 [2000] BIT AS-CUTTER  
 

#KEBP41330422
 

351-2678: KIT-CUTTER BIT

351-2678 KIT-CUTTER BIT
S/N 7FS1-UP
FIELD INSTALLATION
i05349011 KEBP4133
3512678 KIT-CUTTER BIT Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 351-2677 [2000] BIT AS-CUTTER  
 

#KEBP41330423
 

107-1137: LATCH GP-ROTOR

107-1137 LATCH GP-ROTOR
S/N 7FS1-UP
PART OF 151-5797 CASE GP-CHAIN DRIVE
i00493697 KEBP4133
1071137 LATCH GP-ROTOR Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-4957 [1] BLOCK  
2. 7X-0359 [4] BOLT (5/8-11X6-IN)  
3. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
4. 8D-8168 [1] BEARING (63.65-MM ID)  
5. 4D-3120 [1] BOLT-SOCKET HEAD (3/8-16X1.5-IN)  
6. 086-9852 [1] PIN  
7. 037-8889 [1] SPRING  
8. 109-1107 [1] BAR  
9. 8M-5172 [2] PLATE  
10. 2K-4973 [3] LOCKNUT (3/8-16-THD)  
11. 8T-2501 [3] BOLT (3/8-16X2-IN)  
12. 109-1105 [1] LEVER AS  
13. 8F-5340 [1] SEAL-LIP TYPE  
14. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
 

#KEBP41330424
 

141-5076: LINES GP-ROTOR TRANSMISSION

141-5076 LINES GP-ROTOR TRANSMISSION
S/N 7FS1-138
PART OF 141-5075 HYDRAULIC AR-AUXILIARY
i00501910 KEBP4133
1415076 LINES GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-9342 [1] HOSE AS  
2. 110-9343 I [1] HOSE AS  
3. 110-1988 I [1] HOSE AS  
4. 101-9697 I [1] HOSE AS  
5. 135-2689 Y [1] PUMP GP-GEAR  
6. 9H-8872 [1] GASKET  
7. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 132-0122 Y [1] FILTER GP-OIL  
10. 5K-0906 [4] BOLT (5/16-18X0.625-IN)  
11. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 121-7019 Y [1] VALVE GP-MANIFOLD  
13. 7X-0292 [3] BOLT (3/8-16X4.5-IN)  
14. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 108-4812 [1] TUBE AS  
16. 1G-6534 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
17. 4H-2719 [1] GASKET  
18. 8T-7008 [2] BOLT (3/8-16X3-IN)  
19. 6V-8629 [1] ELBOW  
20. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)  
21. 135-2094 [1] CONNECTOR  
22. 6V-8189 [4] NUT (5/16-18-THD)  
23. 1P-4579 [2] FLANGE-HALF  
24. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
25. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-9008 [1] ELBOW  
27. 6V-5258 [1] ADAPTER  
28. 6V-8714 [2] CONNECTOR  
29. 6V-8637 [2] CONNECTOR  
30. 102-1673 I [1] HOSE AS  
31. 7R-7942 [4] CLAMP  
32. 7R-7952 [2] COVER  
33. 7X-0265 [4] BOLT (1/4-20X2.75-IN)  
34. 4D-7388 [1] CLIP (LOOP)  
35. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
36. 2M-9780 [1] SEAL-O-RING  
37. 4J-0524 [1] SEAL-O-RING  
38. 3J-1907 [2] SEAL-O-RING  
39. 3D-2824 [5] SEAL-O-RING  
40. 7M-8485 [2] SEAL-O-RING  
41. 2S-4078 [1] SEAL-O-RING  
42. 134-4731 [1] PLATE  
43. 6V-9746 [3] SEAL-O-RING  
44. 5K-9090 [4] SEAL-O-RING  
45. 8T-0315 [2] SEAL-O-RING  
46. 111-1460 [1] VALVE-CHECK  
47. 111-1766 [1] PLATE AS  
48. 7X-0343 [2] BOLT (5/8-11X1.25-IN)  
49. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
50. 5V-6152 [2] CLAMP  
51. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
52. 7R-7951 [1] PLATE  
53. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
54. 6V-0852 [1] CAP-DUST  
55. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
56. 7R-7957 [2] NUT  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP41330425
 

141-5076: LINES GP-ROTOR TRANSMISSION

141-5076 LINES GP-ROTOR TRANSMISSION
S/N 7FS139-UP
PART OF 141-5075 HYDRAULIC AR-AUXILIARY
Type 1
i01151817 KEBP4133
1415076 LINES GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-9342 [1] HOSE AS  
2. 183-3431 I [1] HOSE AS  
3. 183-3430 I [1] HOSE AS  
4. 101-9697 I [1] HOSE AS  
5. 135-2689 Y [1] PUMP GP-GEAR  
6. 9H-8872 [1] GASKET  
7. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 132-0122 Y [1] FILTER GP-OIL  
10. 5K-0906 [4] BOLT (5/16-18X0.625-IN)  
11. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 170-7292 CY [1] VALVE GP-MANIFOLD & RELIEF  
13. 7X-0292 [3] BOLT (3/8-16X4.5-IN)  
14. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 108-4812 [1] TUBE AS  
16. 1G-6534 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
17. 4H-2719 [1] GASKET  
18. 8T-7008 [2] BOLT (3/8-16X3-IN)  
19. 6V-8629 [1] ELBOW  
20. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)  
21. 135-2094 [1] CONNECTOR  
22. 7R-7957 [2] NUT  
23. 1P-4579 [2] FLANGE-HALF  
24. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
25. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-9008 [1] ELBOW  
27. 6V-5258 [1] ADAPTER  
28. 6V-8714 [2] CONNECTOR  
29. 6V-8637 [2] CONNECTOR  
30. 102-1673 I [1] HOSE AS  
31. 7R-7942 [4] CLAMP  
32. 7R-7952 [2] COVER  
33. 7X-0265 [4] BOLT (1/4-20X2.75-IN)  
34. 4D-7388 [1] CLIP (LOOP)  
35. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
36. 2M-9780 [1] SEAL-O-RING  
37. 4J-0524 [1] SEAL-O-RING  
38. 3J-1907 [2] SEAL-O-RING  
39. 3D-2824 [5] SEAL-O-RING  
40. 7M-8485 [2] SEAL-O-RING  
41. 2S-4078 [1] SEAL-O-RING  
42. 134-4731 [1] PLATE  
43. 6V-9746 [3] SEAL-O-RING  
44. 5K-9090 [4] SEAL-O-RING  
45. 8T-0315 [2] SEAL-O-RING  
46. 111-1460 [1] VALVE-CHECK  
47. 111-1766 [1] PLATE AS  
48. 7X-0343 [2] BOLT (5/8-11X1.25-IN)  
49. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
50. 5V-6152 [2] CLAMP  
51. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
52. 7R-7951 [1] PLATE  
53. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
54. 6V-0852 [1] CAP-DUST  
55. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
56. 6V-8189 [4] NUT (5/16-18-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP41330426
 

141-5076: LINES GP-ROTOR TRANSMISSION

141-5076 LINES GP-ROTOR TRANSMISSION
S/N 7FS139-UP
PART OF 141-5075 HYDRAULIC AR-AUXILIARY
Type 2
i01259459 KEBP4133
1415076 LINES GP-ROTOR TRANSMISSION Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-9342 [1] HOSE AS  
2. 183-3431 I [1] HOSE AS  
3. 183-3430 I [1] HOSE AS  
4. 101-9697 I [1] HOSE AS  
5. 135-2689 Y [1] PUMP GP-GEAR (ROTOR)  
6. 9H-8872 [1] GASKET  
7. 8T-8919 [2] BOLT (1/2-13X1.75-IN)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 179-8188 CY [1] FILTER GP-OIL (ROTOR TRANSMISSION)  
10. 4M-0061 [4] BOLT (5/16-18X0.75-IN)  
11. 8T-4224 [12] WASHER-HARD (8.8X16X2-MM THK)  
12. 170-7292 Y [1] VALVE GP-MANIFOLD & RELIEF  
13. 7X-0292 [3] BOLT (3/8-16X4.5-IN)  
14. 8T-4896 [5] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 108-4812 [1] TUBE AS  
16. 1G-6534 [1] GAUGE AS-OIL LEVEL (DIPSTICK)  
17. 4H-2719 [1] GASKET  
18. 8T-7008 [2] BOLT (3/8-16X3-IN)  
19. 6V-8189 [4] NUT (5/16-18-THD)  
20. 4W-9972 [1] SENDER AS-TEMPERATURE (12-VOLT)  
21. 8T-8985 [1] CONNECTOR  
22. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
23. 1P-4579 [2] FLANGE-HALF  
24. 0S-1587 [4] BOLT (1/2-13X1.75-IN)  
25. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-9008 [1] ELBOW  
27. 6V-5258 [1] ADAPTER  
28. 6V-8714 [2] CONNECTOR  
29. 6V-8637 [2] CONNECTOR  
30. 7X-2536 M [4] BOLT (M8X1.25X14-MM)  
31. 7R-7942 [4] CLAMP  
32. 7R-7952 [2] COVER  
33. 7X-0265 [4] BOLT (1/4-20X2.75-IN)  
34. 4D-7388 [1] CLIP (LOOP)  
35. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
36. 6V-0852 [1] CAP-DUST  
37. 4J-0524 [1] SEAL-O-RING  
38. 3J-1907 [2] SEAL-O-RING  
39. 3D-2824 [5] SEAL-O-RING  
40. 7M-8485 [2] SEAL-O-RING  
41. 2S-4078 [1] SEAL-O-RING  
42. 134-4731 [1] PLATE  
43. 6V-9746 C [2] SEAL-O-RING  
44. 5K-9090 [4] SEAL-O-RING  
45. 8T-0315 [2] SEAL-O-RING  
46. 111-1460 [1] VALVE-CHECK  
47. 111-1766 [1] PLATE AS  
48. 7X-0343 [2] BOLT (5/8-11X1.25-IN)  
49. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
50. 5V-6152 [2] CLAMP  
51. 7X-0264 [2] BOLT (1/4-20X2.5-IN)  
52. 7R-7951 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP41330427
 

106-7485: LINKAGE GP-MIXING CHAMBER

106-7485 LINKAGE GP-MIXING CHAMBER
S/N 7FS1-89
PART OF 138-8767 CHASSIS AR
i00490850 KEBP4133
1067485 LINKAGE GP-MIXING CHAMBER Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-0978 CY [1] CYLINDER & MTG GP-TILT  
2. 125-5424 Y [1] CYLINDER & MTG GP-DOOR  
3. 109-3470 Y [1] CYLINDER & MTG GP-LIFT  
4. 1G-5652 [2] BLOCK  
5. 7X-0338 [8] BOLT (1/2-13X6-IN)  
6. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6F-7030 [4] BOLT (3/8-24X1-IN)  
8. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 6R-4109 [2] PIN  
10. 6V-8188 [2] NUT (1/2-13-THD)  
11. 1G-6120 [2] SPRING-RUBBER  
12. 1G-5676 [1] BAR AS-SUSPENSION  
13. 6V-5002 [2] BEARING-ALIGNING  
14. 8V-2911 [4] PIN  
15. 8T-5463 [8] WASHER (39X66X5-MM THK)  
16. 3B-4647 [4] PIN-COTTER  
17. 124-6154 [4] YOKE AS  
18. 124-6153 [2] ROD  
19. 7F-0216 [4] NUT-JAM (1-1/2-6-THD)  
20. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#KEBP41330428
 

161-5917: LINKAGE GP-MIXING CHAMBER

161-5917 LINKAGE GP-MIXING CHAMBER
S/N 7FS90-169
PART OF 138-8767 CHASSIS AR
i00871250 KEBP4133
1615917 LINKAGE GP-MIXING CHAMBER Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-0978 Y [1] CYLINDER & MTG GP-TILT  
2. 125-5424 Y [1] CYLINDER & MTG GP-DOOR  
3. 153-2373 Y [1] CYLINDER & MTG GP-LIFT  
4. 1G-5652 [2] BLOCK  
5. 7X-0338 [8] BOLT (1/2-13X6-IN)  
6. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6F-7030 [4] BOLT (3/8-24X1-IN)  
8. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 6R-4109 [2] PIN  
10. 6V-8188 [2] NUT (1/2-13-THD)  
11. 1G-6120 [2] SPRING-RUBBER  
12. 1G-5676 [1] BAR AS-SUSPENSION  
13. 6V-5002 [2] BEARING-ALIGNING  
14. 8V-2911 [4] PIN  
15. 8T-5463 [8] WASHER (39X66X5-MM THK)  
16. 3B-4647 [4] PIN-COTTER  
17. 124-6154 [4] YOKE AS  
18. 124-6153 [2] ROD  
19. 7F-0216 [4] NUT-JAM (1-1/2-6-THD)  
20. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP41330429
 

188-3467: LINKAGE GP-MIXING CHAMBER

188-3467 LINKAGE GP-MIXING CHAMBER
S/N 7FS170-UP
PART OF 138-8767, 178-0626 CHASSIS AR
i01323650 KEBP4133
1883467 LINKAGE GP-MIXING CHAMBER Parts scheme
  For full view, you need register

Parts for your RM-350B RECLAIMER MIXER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-0978 Y [1] CYLINDER & MTG GP-TILT  
2. 125-5424 Y [1] CYLINDER & MTG GP-DOOR  
3. 187-1421 Y [1] CYLINDER & MTG GP-LIFT  
4. 1G-5652 [2] BLOCK  
5. 7X-0338 [8] BOLT (1/2-13X6-IN)  
6. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 6F-7030 [4] BOLT (3/8-24X1-IN)  
8. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 238-2899 [2] PIN  
10. 8T-4244 M [2] NUT (M12X1.75-THD)  
11. 1G-6120 [2] SPRING-RUBBER  
12. 1G-5676 [1] BAR AS-SUSPENSION  
13. 6V-5002 [2] BEARING-ALIGNING  
14. 8V-2911 [4] PIN  
15. 8T-5463 [8] WASHER (39X66X5-MM THK)  
16. 3B-4647 [4] PIN-COTTER  
17. 217-0688 [2] YOKE AS  
18. 3B-8489 [6] FITTING-GREASE (1/8-27 PTF)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog RM-350B :

KIT-CUTTER BIT
349-4946 KIT-CUTTER BIT
KIT-CUTTER BIT
342-1302 KIT-CUTTER BIT
KIT-CUTTER BIT
316-2327 KIT-CUTTER BIT
KIT-CUTTER BIT
238-3191 KIT-CUTTER BIT
KIT-CUTTER BIT
222-7579 KIT-CUTTER BIT
KIT-CUTTER BIT
222-7578 KIT-CUTTER BIT
KIT-CUTTER BIT
144-1238 KIT-CUTTER BIT
IDLER GP-CHAIN DRIVE
184-9844 IDLER GP-CHAIN DRIVE
KIT-CUTTER BIT
350-7199 KIT-CUTTER BIT
KIT-CUTTER BIT
351-2678 KIT-CUTTER BIT
LATCH GP-ROTOR
107-1137 LATCH GP-ROTOR
LINES GP-ROTOR TRANSMISSION
141-5076 LINES GP-ROTOR TRANSMISSION
LINES GP-ROTOR TRANSMISSION
141-5076 LINES GP-ROTOR TRANSMISSION
LINES GP-ROTOR TRANSMISSION
141-5076 LINES GP-ROTOR TRANSMISSION
LINKAGE GP-MIXING CHAMBER
106-7485 LINKAGE GP-MIXING CHAMBER
LINKAGE GP-MIXING CHAMBER
161-5917 LINKAGE GP-MIXING CHAMBER

Truck sale:

Caterpillar RM-350B, Construction
224,525 
Caterpillar RM-350B, Construction
- stabilizers / reclaimers
FINNING CANADA (SASKATCHEWAN)
Canada
CATERPILLAR RM-350B 2003
 
CATERPILLAR RM-350B 2003
- STABILIZERS / RECLAIMERS
FINNING CANADA (SASKATCHEWAN)
2360 Pasqua St North Box 707 - Regina -
CATERPILLAR RM-350B 2003
 
CATERPILLAR RM-350B 2003
- STABILIZERS / RECLAIMERS
FABICK CAT
CATERPILLAR RM-350B 2005
 
CATERPILLAR RM-350B 2005
- STABILIZERS / RECLAIMERS
WAGNER EQUIPMENT CO
United States
2003 CAT RM-350B
USD $75,500 
2003 CAT RM-350B

Foley Equipment Company
Topeka Area, Kansas
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.