AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

437-5910 ENCLOSURE GP-ENGINE S/N CW61-UP; S661-UP PART OF 435-3896, 435-3897 CHASSIS AR CS-64B VIBRATORY COMPACTOR


FRAME AND BODY
ENCLOSURE GP
FRAME GP
GUARD GP
HITCH GP
HOOD GP

VIBRATORY COMPACTOR CS-64B VIBRATORY COMPACTOR CW6
 CS66B, CS64B Vibratory Soil Compactor CW600001-UP (MACHINE) POWERED BY C4.4 Engine KEBP6205 CS-64B CW6   (2015)

FRAME AND BODY

ENCLOSURE GP
ENCLOSURE GP-ENGINE
437-5910 ENCLOSURE GP-ENGINE
 

#KEBP62050350
 

437-5910: ENCLOSURE GP-ENGINE

437-5910 ENCLOSURE GP-ENGINE
S/N CW61-UP; S661-UP
PART OF 435-3896, 435-3897 CHASSIS AR
i06133096 KEBP6205
4375910 ENCLOSURE GP-ENGINE Parts scheme 4375910 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-4463 [1] STRIKER AS  
2. 124-6569 [2] FASTENER  
3. 135-5049 [1] CABLE AS  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
4. 202-0949 [1] STRAP AS  
5. 280-3991 [3] STUD-BALL  
6. 280-3992 [4] CLIP-RETAINING  
7. 291-4374 [1] PIN  
8. 322-5217 [1] PIPE AS-EXHAUST  
9. 347-9704 [1] SHIELD AS  
10. 354-0319 [2] SPRING AS-GAS  
11. 356-1744 [1] PANEL (LH)  
12. 356-1745 [1] PANEL (RH)  
13. 364-6609 [1] INSULATION  
14. 374-9835 [1] INSULATION (LH)  
15. 374-9836 [1] INSULATION (RH)  
16. 386-5625 [1] GASKET  
17. 442-8679 [1] PLATE AS  
  9R-2613 M [1] BOSS-WELD (M10X1.5X25-MM)  
18. 450-5831 [1] INSULATION  
19. 450-5832 [1] INSULATION  
20. 451-0707 [1] INSULATION  
21. 451-4782 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  9R-2613 M [1] BOSS-WELD (M10X1.5X25-MM)  
22. 451-7937 Y [1] HOOD GP  
23. 455-8451 [1] PLATE-SUPPORT  
24. 482-1594 [1] INSULATION  
25. 482-4371 [1] SUPPORT AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  9R-2160 M [4] BOSS (M8X1.25X25-MM)  
  355-8941 M [6] NUT-WELD (M16X2-THD)  
26. 089-7338 [1] SLEEVE (11X20X9-MM THK)  
27. 089-7968 [1] WASHER (13X27.5X2.5-MM THK)  
28. 115-6433 [6] WASHER (11X50X6-MM THK)  
29. 3B-8453 [1] SEAL-O-RING  
30. 5C-9553 M [1] BOLT (M6X1X16-MM)  
31. 5P-4115 [1] WASHER-HARD (7.2X19X2-MM THK)  
32. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 5P-5774 [1] PLUG  
34. 7X-2555 M [4] BOLT (M16X2X80-MM)  
35. 7X-7729 [13] WASHER (11X25X3-MM THK)  
36. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
37. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
39. 344-5675 M [3] NUT (M10X1.5-THD)  
40. 8T-4138 M [1] BOLT (M6X1X20-MM)  
41. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
42. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
43. 8T-4193 M [2] BOLT (M16X2X50-MM)  
44. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
45. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
46. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 8T-4244 M [1] NUT (M12X1.75-THD)  
48. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
49. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
50. 9X-2039 M [4] SCREW-TRUSS HEAD (M10X1.5X35-MM)  
51. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
52. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
53. 5P-7483 D SEAL (1.3-M)  
54. 6V-2803 D SEAL (0.3-M)  
55. 9X-8699 E SEAL (302-CM)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62050351
 

347-9577: FRAME GP-FRONT

347-9577 FRAME GP-FRONT
S/N CW61-UP
PART OF 435-3896 CHASSIS AR
i04896342 KEBP6205
3479577 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-9866 [1] PLATE-END  
2. 173-2731 Y [1] HITCH GP-ARTICULATING & OSC (PADDED DRUM)  
3. 365-9860 Y [1] FRAME GP-FRONT  
4. 7X-2577 M [8] BOLT (M24X3X90-MM)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62050352
 

347-9578: FRAME GP-FRONT

347-9578 FRAME GP-FRONT
S/N S661-UP
PART OF 435-3897 CHASSIS AR
i04898097 KEBP6205
3479578 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 141-9864 Y [1] HITCH GP-ARTICULATING & OSC (SMOOTH DRUM)  
2. 141-9866 [1] PLATE-END  
3. 366-1484 Y [1] FRAME GP-FRONT  
4. 7X-2577 M [8] BOLT (M24X3X90-MM)  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62050353
 

365-9860: FRAME GP-FRONT

365-9860 FRAME GP-FRONT
S/N CW61-UP
PART OF 347-9577 FRAME GP-FRONT
i04896336 KEBP6205
3659860 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 355-8455 [1] YOKE AS  
2. 371-5979 B [4] SHIM (2-MM THK)  
3. 384-5060 [1] BUMPER AS  
  384-5042 [3] PLATE AS  
4. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
5. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP62050354
 

366-1484: FRAME GP-FRONT

366-1484 FRAME GP-FRONT
S/N S661-UP
PART OF 347-9578 FRAME GP-FRONT
i04898093 KEBP6205
3661484 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 355-8456 [1] YOKE AS  
2. 371-5979 B [4] SHIM (2-MM THK)  
3. 384-5041 [1] BUMPER AS  
  102-8706 [2] PLATE AS  
  384-5042 [3] PLATE AS  
4. 7X-2565 M [8] BOLT (M20X2.5X100-MM)  
5. 8T-4123 [8] WASHER (22X35X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP62050355
 

435-8567: FRAME GP-REAR

435-8567 FRAME GP-REAR
S/N CW61-UP; S661-UP
PART OF 435-3896, 435-3897 CHASSIS AR
i06133089 KEBP6205
4358567 FRAME GP-REAR Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5E-9892 [1] PIN  
2. 077-6627 M [2] SCREW-DRIVE (NO 12X12.7-MM)  
3. 143-4653 [2] CLAMP  
4. 195-1411 [1] CHAIN  
5. 356-1735 [1] COVER  
6. 359-2018 [1] PIN AS  
7. 443-3620 [1] FRAME AS-REAR  
8. 7X-0632 [2] WASHER-HARD (11X36X6-MM THK)  
9. 7X-7729 [6] WASHER (11X25X3-MM THK)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4133 M [4] NUT (M10X1.5-THD)  
12. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
13. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
14. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 8T-4649 M [8] BOLT (M24X3X140-MM)  
  M   METRIC PART
 

#KEBP62050356
 

355-2660: GUARD GP-TRANSMISSION

355-2660 GUARD GP-TRANSMISSION
S/N CW61-UP; S661-UP
PART OF 479-9026, 479-9027 DISTRIBUTION AR
AN ATTACHMENT
i04488671 KEBP6205
3552660 GUARD GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 416-9692 [1] GUARD  
2. 3E-9411 [4] WASHER-HARD (17.5X38X6-MM THK)  
3. 7X-2553 M [4] BOLT (M16X2X40-MM)  
  M   METRIC PART
 

#KEBP62050357
 

141-9864: HITCH GP-ARTICULATING & OSC

141-9864 HITCH GP-ARTICULATING & OSC -SMOOTH DRUM
S/N S661-UP
PART OF 347-9578 FRAME GP-FRONT
i00884093 KEBP6205
1419864 HITCH GP-ARTICULATING & OSC Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-4471 [2] LOCKNUT  
2. 9C-9219 [2] NUT-SPECIAL  
3. 9H-6079 [4] SEAL-LIP TYPE  
4. 249-7387 [1] HITCH  
5. 141-9865 [4] CAP-BEARING  
6. 162-5395 [1] SHAFT (OSCILLATION)  
7. 162-5394 [1] SHAFT (ARTICULATION)  
8. 185-8756 [2] SPACER (77X93X5-MM THK)  
9. 143-7356 [4] BEARING-TAPERED ROLLER  
10. 2H-3935 [4] SEAL-O-RING  
11. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4195 M [32] BOLT (M10X1.5X30-MM)  
13. 9F-2247 [4] PLUG-PIPE  
  M   METRIC PART
 

#KEBP62050358
 

173-2731: HITCH GP-ARTICULATING & OSC

173-2731 HITCH GP-ARTICULATING & OSC
S/N CW61-UP
PART OF 347-9577 FRAME GP-FRONT
i01584735 KEBP6205
1732731 HITCH GP-ARTICULATING & OSC Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-3925 [4] CUP-BEARING  
2. 3F-5950 [4] CONE-BEARING  
3. 9H-6079 [4] SEAL-LIP TYPE  
4. 249-1291 [4] CAP-BEARING  
5. 173-2686 [1] SHAFT (ARTICULATION)  
6. 173-2687 [1] SHAFT (OSCILLATION)  
7. 249-7388 [1] HITCH  
8. 187-9278 B [2] SHIM PACK (INCLUDES 3-SHIMS)  
9. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4186 M [32] BOLT (M10X1.5X40-MM)  
11. 9F-2247 [4] PLUG-PIPE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#KEBP62050359
 

451-7937: HOOD GP

451-7937 HOOD GP
S/N CW61-UP; S661-UP
PART OF 437-5910 ENCLOSURE GP-ENGINE
i06123117 KEBP6205
4517937 HOOD GP Parts scheme 4517937 HOOD GP Parts scheme
  For full view, you need register

Parts for your CS-64B VIBRATORY COMPACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1384 [2] BUMPER-CONICAL  
2. 6V-7636 [1] PIN AS-SPRING  
3. 122-8427 [1] SPACER (9X14X3.5-MM THK)  
4. 147-3719 [2] PLUG-BUTTON  
5. 177-3405 [2] PIN  
6. 218-2207 [1] LATCH AS-DOOR (ROTARY)  
7. 220-8262 [1] ROD  
8. 280-3991 [1] STUD-BALL  
9. 336-6672 [1] HANDLE AS (PULL)  
10. 355-3186 [1] SUPPORT  
11. 355-3190 [1] HOOD AS  
12. 356-1741 [2] HINGE AS  
13. 374-9817 [1] TAB  
14. 386-5619 [1] LEVER  
15. 386-5625 [1] GASKET  
16. 417-4364 [1] INSULATION  
17. 417-4365 [1] INSULATION  
18. 451-7936 [1] FRAME AS-HOOD  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
  8T-3490 M [8] NUT-WELD (M10X1.5-THD)  
19. 5P-0372 [2] LOCK PIN  
20. 5C-2890 M [28] NUT (M6X1-THD)  
21. 5C-7261 M [2] NUT (M8X1.25-THD)  
22. 9X-6165 [56] WASHER (6.5X22X2.5-MM THK)  
23. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7357 M [4] BOLT (M6X1X25-MM)  
25. 4K-9429 [3] RIVET-POP  
26. 6V-8185 [1] NUT (1/4-20-THD)  
27. 7X-0579 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
28. 7X-7729 [23] WASHER (11X25X3-MM THK)  
29. 8T-0389 M [8] LOCKNUT (M10X1.5-THD)  
30. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4138 M [32] BOLT (M6X1X20-MM)  
32. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
33. 8T-4195 M [8] BOLT (M10X1.5X30-MM)  
34. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
35. 491-8257 M [6] BOLT (M8X1.25X16-MM)  
36. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
38. 9X-2027 [8] WASHER (11X18X2-MM THK)  
39. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
40. 355-3183 [1] SCREEN  
41. 355-3184 [2] SCREEN  
42. 6V-2803 D SEAL (0.84-M EACH)  
43. 5P-5687 D SEAL (0.9-M EACH)  
43A. 5P-5687 D SEAL (0.045-M EACH)  
43B. 5P-5687 D SEAL (0.77-M)  
43C. 5P-5687 D SEAL (0.15-M EACH)  
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Access Doors and Covers
CS54B, CP54B and CS64B Vibratory Soil Compactors
Specifications
Engine Enclosure (Hood)
CP54B, CS54B and CS64B Vibratory Soil Compactors Machine Systems
Disassembly and Assembly
Engine Enclosure (Hood) - Remove and Install
CS54B, CP54B and CS64B Vibratory Soil Compactors Engine Supplement

Caterpillar Parts SIS Catalog CS-64B :

DOOR GP-ACCESS
468-3808 DOOR GP-ACCESS
WHEEL & TIRE GP
203-4719 WHEEL & TIRE GP
WHEEL & TIRE GP
203-4688 WHEEL & TIRE GP
WHEEL & TIRE GP
203-4687 WHEEL & TIRE GP
WHEEL & TIRE GP
175-0048 WHEEL & TIRE GP
WHEEL & MTG GP-DRIVE
203-4718 WHEEL & MTG GP-DRIVE
WHEEL & MTG GP-DRIVE
203-4717 WHEEL & MTG GP-DRIVE
WHEEL & MTG GP-DRIVE
175-0050 WHEEL & MTG GP-DRIVE
FRAME GP-FRONT
347-9577 FRAME GP-FRONT
FRAME GP-FRONT
347-9578 FRAME GP-FRONT
FRAME GP-FRONT
365-9860 FRAME GP-FRONT
FRAME GP-FRONT
366-1484 FRAME GP-FRONT
FRAME GP-REAR
435-8567 FRAME GP-REAR
GUARD GP-TRANSMISSION
355-2660 GUARD GP-TRANSMISSION
HITCH GP-ARTICULATING & OSC
141-9864 HITCH GP-ARTICULATING & OSC
HITCH GP-ARTICULATING & OSC
173-2731 HITCH GP-ARTICULATING & OSC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.