OPERATOR STATION
CONSOLE GPCONTROL GP-DIRECTION & SPEED
CONTROL GP-STEERING
CAB GP
OPERATOR GP
PANEL GP
OPERATOR STATION
CONSOLE GP
#KEBP62130310
444-5382: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 258-4648 E | SEAL (1-CM) | ||
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 5P-8500 | [2] | KEY | |
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 467-8535 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 128-6157 | [1] | PLATE | |
| 7. | 180-9900 | [2] | CAP AS | |
| (EACH INCLUDES) | ||||
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 8. | 232-1792 | [1] | HORN (24-VOLT TO 12-VOLT) | |
| 9. | 308-3527 | [2] | SWITCH AS-TOGGLE (OPERATOR LADDER UP, DOWN) | |
| (EACH INCLUDES) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 344-7618 | [1] | COVER-SEAL | |
| 11. | 398-3073 | [1] | CABLE AS | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM) | |||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 331-4222 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 12. | 441-9360 | [1] | GUARD GP-VANDALISM | |
| 13. | 463-9951 Y | [1] | HARNESS AS-CONSOLE | |
| 14. | 464-6803 | [1] | CONTROL GP-ELECTRONIC | |
| 15. | 470-5692 Y | [1] | PANEL GP-INSTRUMENT | |
| 16. | 486-6518 | [1] | RESISTOR AS (FRONT) | |
| 16A. | 486-6518 | [1] | RESISTOR AS (REAR) | |
| (EACH RESISTOR AS INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 17. | 105-3486 M | [4] | BOLT-SOCKET HEAD (M6X1X50-MM) | |
| 18. | 130-5300 | [6] | CLIP | |
| 19. | 133-6934 | [2] | SPACER (11X20X25-MM THK) | |
| 20. | 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | |
| 21. | 177-2215 | [1] | STRAP-DUAL CLAMP | |
| 22. | 203-9007 | [1] | NUT (1-1/2-18-THD) | |
| 23. | 209-8296 M | [6] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 24. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 25. | 344-5674 M | [1] | NUT (M8X1.25-THD) | |
| 26. | 381-2621 | [1] | MOUNTING-CABLE TIE | |
| 27. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 28. | 8T-3991 M | [1] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 29. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 8T-6912 M | [2] | BOLT (M8X1.25X50-MM) | |
| 31. | 8T-7547 M | [1] | BOLT (M8X1.25X30-MM) | |
| 32. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP62130311
444-5382: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6870 CM | [1] | BOLT (M8X1.25X70-MM) | |
| 2. | 8T-6912 M | [1] | BOLT (M8X1.25X50-MM) | |
| 3. | 3S-2093 C | [5] | STRAP-CABLE | |
| 4. | 5P-8500 | [2] | KEY | |
| 5. | 6V-9671 M | [4] | SCREW-MACHINE (M3X0.5X12-MM) | |
| 6. | 7K-1181 C | [3] | STRAP-CABLE | |
| 7. | 8T-4121 C | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 10. | 467-8535 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 11. | 128-6157 | [1] | PLATE | |
| 12. | 133-6934 C | [3] | SPACER (11X20X25-MM THK) | |
| 13. | 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | |
| 14. | 180-9900 | [2] | CAP AS | |
| (EACH INCLUDES) | ||||
| 5P-7958 | [1] | SLEEVE-CABLE SPLICE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 179-9392 | [1] | LANYARD | ||
| 15. | 209-8296 M | [6] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 16. | 232-1792 | [1] | HORN (24-VOLT TO 12-VOLT) | |
| 17. | 238-0251 CM | [1] | SCREW-BUTTON HEAD (M10X1.5X25-MM) | |
| 18. | 308-3527 | [2] | SWITCH AS-TOGGLE (OPERATOR LADDER UP, DOWN) | |
| (EACH INCLUDES) | ||||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5677 BD | WIRE (18-GA, BLACK) | |||
| 19. | 344-5673 M | [1] | NUT (M6X1-THD) | |
| 20. | 344-5675 CM | [1] | NUT (M10X1.5-THD) | |
| 21. | 344-7618 | [1] | COVER-SEAL | |
| 22. | 351-8647 C | [1] | PLUG AS-CONNECTOR (12-PIN) | |
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 23. | 398-3073 | [1] | CABLE AS | |
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(3-CM) | |||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 331-4222 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 169-0705 | [8] | SEAL | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 344-7617 | [1] | RECEPTACLE AS | ||
| 24. | 528-2427 | [1] | GUARD GP-VANDALISM | |
| 226-0294 J | [2] | LOCK AS | ||
| 226-0338 | [2] | CAM | ||
| 25. | 464-6803 | [1] | CONTROL GP-ELECTRONIC | |
| 26. | 539-0090 Y | [1] | PANEL GP-INSTRUMENT | |
| 27. | 516-7058 CY | [1] | HARNESS AS-CONSOLE | |
| 28. | 486-6518 | [1] | RESISTOR AS (FRONT) | |
| 28A. | 486-6518 | [1] | RESISTOR AS (REAR) | |
| (EACH RESISTOR AS INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 30. | 105-3486 M | [4] | BOLT-SOCKET HEAD (M6X1X50-MM) | |
| 31. | 130-5300 | [6] | CLIP | |
| 32. | 177-2215 C | [2] | STRAP-DUAL CLAMP | |
| 33. | 203-9007 | [1] | NUT (1-1/2-18-THD) | |
| 34. | 352-3968 C | [1] | CLIP (LADDER) | |
| 35. | 8T-3991 M | [1] | SCREW-BUTTON HEAD (M6X1X20-MM) | |
| 36. | 3E-6600 CE | SEAL (9-CM) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#KEBP62130312
459-2890: CONSOLE GP-OPERATOR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 470-8969 | [1] | COVER-DASH | |
| 2. | 269-2914 | [4] | BALL BEARING | |
| 3. | 276-4641 | [2] | PIN AS | |
| 4. | 286-3769 | [2] | SPACER (10.5X30X47-MM THK) | |
| 5. | 454-2896 | [1] | SUPPORT AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 454-5816 | [1] | SUPPORT AS | |
| 7T-1099 | [2] | LINK | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 8T-8874 M | [4] | NUT-WELD (M5X0.8-THD) | ||
| 130-5300 | [2] | CLIP | ||
| 7. | 454-5818 | [1] | RAIL AS | |
| 8. | 455-9915 | [2] | BEARING | |
| 9. | 455-9916 | [2] | PLATE | |
| 10. | 455-9917 | [1] | SUPPORT AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 11. | 455-9918 | [1] | COVER | |
| 12. | 459-2888 | [1] | TERMINAL AS | |
| 462-9537 | [1] | TERMINAL | ||
| 462-9538 | [20] | LINK | ||
| 13. | 459-2891 | [1] | SUPPORT | |
| 14. | 470-8971 | [1] | COVER-DASH | |
| 15. | 470-8972 | [1] | COVER-DASH | |
| 16. | 471-0175 | [1] | COVER-DASH (TOP) | |
| 17. | 473-6229 | [4] | SPACER | |
| 18. | 483-7933 | [4] | SHIM (2-MM THK) | |
| 19. | 096-4833 M | [2] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 20. | 096-5969 M | [13] | BOLT-SOCKET HEAD (M5X0.8X25-MM) | |
| 21. | 096-6166 | [16] | WASHER-HARD (4.5X9X1-MM THK) | |
| 22. | 214-1733 M | [4] | BOLT-SOCKET HEAD (M5X0.8X80-MM) | |
| 23. | 344-5674 M | [4] | NUT (M8X1.25-THD) | |
| 24. | 3E-8000 M | [2] | NUT-JAM (M16X1.5-THD) | |
| 25. | 450-9474 M | [8] | SCREW-BUTTON HEAD (M10X1.5X40-MM) | |
| 26. | 5C-2874 M | [15] | NUT (M5X0.8-THD) | |
| 27. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 28. | 8T-0328 | [22] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 8T-0389 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 30. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 31. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 32. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 33. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 34. | 8T-4224 | [17] | WASHER-HARD (8.8X16X2-MM THK) | |
| 35. | 8T-9405 M | [8] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 36. | 9X-2616 M | [13] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 37. | 153-8004 M | [8] | BOLT-SOCKET HEAD (M4X0.7X35-MM) | |
| M | METRIC PART | |||
#KEBP62130313
478-3968: CONSOLE GP-OPERATOR
478-3968 CONSOLE GP-OPERATOR
PART OF 444-5406 OPERATOR AR
PART OF 444-5406 OPERATOR AR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 2. | 286-3769 | [2] | SPACER (10.5X30X47-MM THK) | |
| 3. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 4. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 5. | 8T-0328 | [26] | WASHER-HARD (5.5X10X1-MM THK) | |
| 6. | 8T-0389 M | [8] | LOCKNUT (M10X1.5-THD) | |
| 7. | 8T-4121 | [16] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4224 | [17] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 096-5969 M | [13] | BOLT-SOCKET HEAD (M5X0.8X25-MM) | |
| 10. | 096-6166 | [16] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 134-1374 M | [2] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 12. | 214-1733 M | [4] | BOLT-SOCKET HEAD (M5X0.8X80-MM) | |
| 13. | 221-3700 M | [8] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 14. | 269-2914 | [4] | BALL BEARING | |
| 15. | 539-8940 C | [2] | PIN AS | |
| 16. | 344-5674 M | [4] | NUT (M8X1.25-THD) | |
| 17. | 344-5675 M | [2] | NUT (M10X1.5-THD) | |
| 18. | 450-9474 M | [8] | SCREW-BUTTON HEAD (M10X1.5X40-MM) | |
| 19. | 454-2896 | [1] | SUPPORT AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 20. | 454-5818 | [1] | RAIL AS | |
| 21. | 455-9915 | [2] | BEARING | |
| 22. | 455-9916 | [2] | PLATE | |
| 23. | 455-9918 | [1] | COVER | |
| 24. | 459-2888 | [1] | TERMINAL AS | |
| 462-9537 | [1] | TERMINAL | ||
| 462-9538 | [20] | LINK | ||
| 25. | 459-2891 | [1] | SUPPORT | |
| 26. | 539-9109 | [1] | COVER-DASH | |
| 27. | 473-6229 | [4] | SPACER | |
| 28. | 483-0920 | [1] | SUPPORT AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 29. | 483-0921 | [1] | SUPPORT AS | |
| 7T-1099 | [3] | LINK | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 8T-8874 M | [4] | NUT-WELD (M5X0.8-THD) | ||
| 130-5300 | [2] | CLIP | ||
| 30. | 483-0922 | [1] | COVER-DASH (LEFT) | |
| 31. | 483-0923 | [1] | COVER-DASH (RIGHT) | |
| 32. | 483-0924 | [1] | COVER-DASH (FRONT) | |
| 33. | 483-7933 | [4] | SHIM (2-MM THK) | |
| 34. | 153-8004 M | [8] | BOLT-SOCKET HEAD (M4X0.7X35-MM) | |
| 36. | 5C-2874 M | [15] | NUT (M5X0.8-THD) | |
| 37. | 9X-2616 M | [13] | SCREW-SOCKET (M8X1.25X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#KEBP62130314
479-2223: CONTROL GP-DIRECTION & SPEED
479-2223 CONTROL GP-DIRECTION & SPEED
PART OF 449-0382 CONTROL AR-GRADE & SLOPE
AN ATTACHMENT
PART OF 449-0382 CONTROL AR-GRADE & SLOPE
AN ATTACHMENT
For full view, you need register
#KEBP62130315
454-5807: CONTROL GP-STEERING
454-5807 CONTROL GP-STEERING
S/N NNN1-106; WHY1-178
PART OF 444-5403 ELECTRICAL AR
S/N NNN1-106; WHY1-178
PART OF 444-5403 ELECTRICAL AR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 241-2489 | [1] | CAP (COVER) | |
| 2. | 308-6352 | [4] | TUBE | |
| 3. | 310-9985 | [1] | STEERING WHEEL AS | |
| 4. | 424-3530 | [1] | CONTROL AS-STEERING | |
| 5. | 459-2887 | [1] | STEERING COLUMN GP | |
| 6. | 459-2889 | [1] | HUB | |
| 7. | 095-1265 M | [1] | SETSCREW-SOCKET | |
| 8. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 9. | 7X-2538 M | [4] | BOLT (M8X1.25X100-MM) | |
| 10. | 8T-0277 | [1] | PIN-SPRING | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| M | METRIC PART | |||
#KEBP62130316
454-5807: CONTROL GP-STEERING
454-5807 CONTROL GP-STEERING
S/N NNN107-UP; WHY179-UP
PART OF 444-5403 ELECTRICAL AR
S/N NNN107-UP; WHY179-UP
PART OF 444-5403 ELECTRICAL AR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 241-2489 | [1] | CAP (COVER) | |
| 2. | 308-6352 | [4] | TUBE | |
| 3. | 310-9985 | [1] | STEERING WHEEL AS | |
| 4. | 424-3530 | [1] | CONTROL AS-STEERING | |
| 5. | 459-2887 | [1] | STEERING COLUMN GP | |
| 6. | 535-8869 C | [1] | HUB | |
| 7. | 095-1265 M | [1] | SETSCREW-SOCKET | |
| 8. | 6V-8227 M | [1] | NUT (M18X1.5-THD) | |
| 9. | 7X-2538 M | [4] | BOLT (M8X1.25X100-MM) | |
| 10. | 5S-6458 C | [1] | DOWEL | |
| 11. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-4994 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 15. | 1L-8497 C | [1] | RING-SNAP (EXTERNAL) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#KEBP62130317
467-6773: FLOOR MAT GP
467-6773 FLOOR MAT GP
PART OF 444-5401 CHASSIS AR
PART OF 444-5401 CHASSIS AR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS#KEBP62130318
444-5406: OPERATOR AR
444-5406 OPERATOR AR
PART OF 436-1000, 495-0972 COMMON AR
PART OF 436-1000, 495-0972 COMMON AR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS#KEBP62130319
470-5692: PANEL GP-INSTRUMENT
470-5692 PANEL GP-INSTRUMENT
PART OF 444-5382 CONSOLE GP-OPERATOR
PART OF 444-5382 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your AP300F ASPHALT PAVER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 450-3368 | [1] | COVER-PANEL (LOWER) | |
| 2. | 450-3373 | [1] | HARNESS AS-CONSOLE | |
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 194-4254 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 417-7789 Y | [1] | HARNESS AS-CONSOLE | |
| 4. | 417-7002 | [1] | MODULE GP-KEYPAD | |
| 5. | 208-8469 M | [14] | LOCKNUT (M6X1-THD) | |
| 6. | 399-9069 | [4] | SWITCH AS-ROTARY (ENCODER ADAPTER) | |
| (EACH INCLUDES) | ||||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 7. | 434-6547 | [4] | KIT-KNOB | |
| (EACH INCLUDES SCREW, CAP & KNOB) | ||||
| 8. | 417-7007 | [1] | MODULE GP-KEYPAD | |
| 9. | 450-3367 | [1] | COVER-PANEL (UPPER) | |
| 10. | 417-7008 | [1] | MODULE GP-KEYPAD | |
| 11. | 8C-6365 M | [1] | BOLT-SOCKET HEAD (M3X0.5X6-MM) | |
| 12. | 096-5962 | [17] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 13. | 9B-1117 | [9] | LOCKWASHER | |
| 14. | 367-9470 | [1] | SWITCH AS-PUSH BUTTON (EMERGENCY STOP) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 15. | 395-0256 | [1] | SWITCH AS-HORN | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 16. | 417-7006 | [1] | MODULE GP-KEYPAD | |
| 17. | 417-7001 | [1] | LEVER AS | |
| 18. | 166-8637 M | [4] | SCREW-SOCKET HEAD (M4X0.7X12-MM) | |
| 19. | 374-7465 | [2] | CAP-SEAL | |
| 20. | 450-3369 | [1] | BRACKET AS | |
| 21. | 6V-5683 M | [34] | BOLT (M6X1X16-MM) | |
| 22. | 3B-4504 | [40] | LOCKWASHER | |
| 23. | 4Y-4667 | [40] | WASHER (6.4X12.5X1.6-MM THK) | |
| 24. | 8T-0267 M | [6] | BOLT-SOCKET HEAD (M6X1X12-MM) | |
| 25. | 450-3370 | [1] | PLATE-COVER | |
| 26. | 450-3371 | [2] | PLATE | |
| 27. | 203-0099 M | [8] | BOLT-SOCKET HEAD (M3X0.5-THD) | |
| 28. | 3C-6969 M | [8] | NUT (M3X0.5-THD) | |
| 29. | 422-4542 | [1] | BRACKET | |
| 30. | 418-4657 | [1] | COVER | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
OPERATOR STATION
CONSOLE GP
Operation and Maintenance Manual
Specifications
Systems Operation
Disassembly and Assembly
