AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

374-1289 WIRING GP-MACHINE -LH S/N JFC1-UP PART OF 374-1266 ELECTRICAL AR Type 2 ALSO AN ATTACHMENT PM622


ELECTRICAL AND STARTING SYSTEM
WIRING GP
SENSOR GP
WIRING GP
POWER TRAIN
DRIVE GP
CLUTCH GP

COLD PLANER PM622 COLD PLANER JFC
 PM622 Cold Planer JFC00001-UP (MACHINE) POWERED BY C18 Engine KEBP6225 PM622 JFC   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ENGINE
552-1782 WIRING GP-ENGINE
WIRING GP-MACHINE
374-1289 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1289 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1291 WIRING GP-MACHINE
 

#KEBP62250360
 

374-1289: WIRING GP-MACHINE

374-1289 WIRING GP-MACHINE -LH
S/N JFC1-UP
PART OF 374-1266 ELECTRICAL AR
Type 2
ALSO AN ATTACHMENT
i06998585 KEBP6225
3741289 WIRING GP-MACHINE Parts scheme 3741289 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 196-4206 M [4] BOLT-STACKING (M6X1X64-MM)  
2. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
3. 3S-2093 [53] STRAP-CABLE  
4. 7R-7951 [1] PLATE  
5. 7R-7955 [2] PLATE (SLOTTED)  
6. 7V-5628 [1] PLATE (TOP)  
7. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 132-8487 [3] NUT-RING  
10. 163-1201 [1] HORN AS (24-VOLT, LOW TONE)  
11. 177-2215 C [12] STRAP-DUAL CLAMP  
12. 207-2387 [3] PLATE  
13. 272-5934 [6] CLAMP  
14. 301-2980 [2] SWITCH AS-TOGGLE (ROTOR)  
    (EACH INCLUDES)
  5P-5677 BD WIRE (18-GA, BLACK)  
  112-4550 E SLEEVE (21-CM)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
15. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 519-7991 CY [2] HARNESS AS-WIRING (PROPEL MOTOR)  
17. 399-9075 [6] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
19. 469-7514 [1] CABLE AS  
  8C-3056 E CABLE (2-GA, RED)(47-CM)  
  193-9141 [1] COVER-TERMINAL  
  276-1786 [1] COVER-TERMINAL (RED)  
  311-6184 [1] TERMINAL-RING (2-GA, 3/8-IN SCREW)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
  278-1438 [1] TERMINAL-RING  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM)  
20. 470-7130 [1] CABLE AS  
  8C-0596 E CABLE (2-GA)(113-CM)  
  3L-6513 [1] TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)  
  6T-5598 [1] TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW)  
21. 519-7990 CY [1] HARNESS AS-WIRING (LH)  
22. 130-5300 [5] CLIP  
23. 130-5301 [2] CLIP  
24. 132-5789 [2] CLIP (LADDER)  
25. 237-9960 [1] CLIP (LADDER)  
26. 3E-6754 [1] GROMMET  
27. 327-0325 [4] STRAP-CABLE  
28. 352-3969 [1] CLIP (LADDER)  
29. 4P-7581 [10] CLIP (LADDER)  
30. 5C-2890 M [3] NUT (M6X1-THD)  
31. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 5P-4116 [3] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 7K-1181 C [60] STRAP-CABLE  
34. 7P-1695 [1] WASHER (10.5X19X3-MM THK)  
35. 7R-7941 [6] CLAMP  
36. 7V-5626 [2] CLAMP  
37. 7X-2535 M [2] BOLT (M6X1X60-MM)  
38. 8C-8451 M [2] BOLT (M6X1X40-MM)  
39. 8C-8560 C [12] SCREW-LOCK (4-40X0.5-IN)  
40. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4133 M [1] NUT (M10X1.5-THD)  
42. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
43. 8T-4138 M [4] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4200 M [2] BOLT (M8X1.25X16-MM)  
47. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-4244 M [3] NUT (M12X1.75-THD)  
50. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
51. 5C-9553 M [2] BOLT (M6X1X16-MM)  
52. 231-3930 [2] RELAY AS (24-VOLT)  
53. 344-5673 M [2] NUT (M6X1-THD)  
54. 522-6180 Y [1] HARNESS AS-WIRING (ROTOR)(MACHINE)  
55. 9B-1117 C [4] LOCKWASHER  
56. 6V-9671 CM [4] SCREW-MACHINE (M3X0.5X12-MM)  
57. 3C-6969 CM [4] NUT (M3X0.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250361
 

374-1290: WIRING GP-MACHINE

374-1290 WIRING GP-MACHINE -RH
S/N JFC1-UP
PART OF 374-1266 ELECTRICAL AR
Type 1
ALSO AN ATTACHMENT
i06214341 KEBP6225
3741290 WIRING GP-MACHINE Parts scheme 3741290 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
2. 3S-2093 [82] STRAP-CABLE  
3. 7R-7951 [3] PLATE  
5. 132-8487 [3] NUT-RING  
6. 132-8488 [1] NUT-RING  
7. 177-2215 [13] STRAP-DUAL CLAMP  
8. 207-2387 [3] PLATE  
9. 219-6485 Y [1] LAMP GP-FLOOD (24-VOLT)  
10. 267-2145 [1] ALARM AS  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (23-CM)  
11. 272-5934 [4] CLAMP  
12. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 384-8651 Y [2] HARNESS AS-WIRING (PROPEL MOTOR)  
15. 399-9075 [4] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
17. 488-5588 Y [1] HARNESS AS-WIRING (FLOODLIGHT)  
18. 130-5300 [3] CLIP  
19. 130-5301 [2] CLIP  
20. 132-5789 [4] CLIP (LADDER)  
21. 150-5931 [1] GROMMET  
22. 162-9112 [2] GROMMET-SPLIT  
23. 198-4775 [2] WASHER-HARD (6.6X15X6-MM THK)  
24. 208-0075 [2] CLAMP-HALF  
25. 237-9960 [2] CLIP (LADDER)  
26. 2V-8259 [1] GROMMET  
27. 313-4916 [6] CLAMP-HALF  
28. 327-0325 [1] STRAP-CABLE  
29. 352-3968 [1] CLIP (LADDER)  
30. 4B-4280 [3] WASHER (13.5X27X2.5-MM THK)  
31. 4P-7428 [2] CLIP (LADDER)  
32. 4P-7581 [5] CLIP (LADDER)  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
36. 5P-8439 [2] GROMMET  
37. 6V-7357 M [2] BOLT (M6X1X25-MM)  
38. 7K-1181 [45] STRAP-CABLE  
39. 7X-2535 M [4] BOLT (M6X1X60-MM)  
41. 8C-8560 [16] SCREW-LOCK (4-40X0.5-IN)  
42. 8T-3844 M [2] BOLT (M6X1X70-MM)  
43. 8T-4138 M [2] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [3] NUT (M12X1.75-THD)  
48. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
49. 121-8004 [4] CLAMP  
50. 102-8705 [2] PLATE (TOP)  
51. 8T-6912 M [2] BOLT (M8X1.25X50-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250362
 

374-1290: WIRING GP-MACHINE

374-1290 WIRING GP-MACHINE -RH
S/N JFC1-UP
PART OF 374-1266 ELECTRICAL AR
Type 2
ALSO AN ATTACHMENT
i06998572 KEBP6225
3741290 WIRING GP-MACHINE Parts scheme 3741290 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-2386 M [6] BOLT-STACKING (M6X1.25X49-MM)  
2. 3S-2093 [82] STRAP-CABLE  
3. 7R-7951 [3] PLATE  
5. 132-8487 [3] NUT-RING  
7. 177-2215 [20] STRAP-DUAL CLAMP  
8. 207-2387 [3] PLATE  
9. 219-6485 Y [1] LAMP GP-FLOOD (24-VOLT)(VERTICAL)  
10. 267-2145 [1] ALARM AS  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-1813 E SLEEVE (29-CM)  
11. 272-5934 [4] CLAMP  
12. 334-5410 [1] LAMP GP-SIGNAL  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 519-7991 CY [2] HARNESS AS-WIRING (PROPEL MOTOR)  
15. 399-9075 [4] HARNESS AS-SENSOR  
    (EACH INCLUDES)
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  176-9299 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 415-4792 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
17. 488-5588 Y [1] HARNESS AS-WIRING (FLOODLIGHT)  
18. 130-5300 [3] CLIP  
19. 130-5301 [2] CLIP  
20. 132-5789 [4] CLIP (LADDER)  
21. 150-5931 [1] GROMMET  
22. 162-9112 [2] GROMMET-SPLIT  
23. 198-4775 [2] WASHER-HARD (6.6X15X6-MM THK)  
24. 208-0075 [2] CLAMP-HALF  
25. 237-9960 [2] CLIP (LADDER)  
26. 2V-8259 [1] GROMMET  
27. 313-4916 [6] CLAMP-HALF  
28. 327-0325 [1] STRAP-CABLE  
29. 352-3968 [1] CLIP (LADDER)  
30. 4B-4280 [3] WASHER (13.5X27X2.5-MM THK)  
31. 4P-7428 [2] CLIP (LADDER)  
32. 4P-7581 [5] CLIP (LADDER)  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
35. 5P-4116 [5] WASHER-HARD (8.8X20.5X2-MM THK)  
36. 5P-8439 [2] GROMMET  
37. 6V-7357 M [2] BOLT (M6X1X25-MM)  
38. 7K-1181 [62] STRAP-CABLE  
39. 7X-2535 M [4] BOLT (M6X1X60-MM)  
41. 8C-8560 C [12] SCREW-LOCK (4-40X0.5-IN)  
42. 8T-3844 M [2] BOLT (M6X1X70-MM)  
43. 8T-4138 M [6] BOLT (M6X1X20-MM)  
44. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
45. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
46. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [3] NUT (M12X1.75-THD)  
48. 9X-8256 [9] WASHER (6.6X12X2-MM THK)  
49. 121-8004 [4] CLAMP  
50. 102-8705 [2] PLATE (TOP)  
51. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
52. 9B-1117 C [4] LOCKWASHER  
53. 6V-9671 CM [12] SCREW-MACHINE (M3X0.5X12-MM)  
54. 3C-6969 CM [4] NUT (M3X0.5-THD)  
55. 533-5480 [2] PLATE AS  
    (EACH INCLUDES)
  [2] NUT-WELD  
56. 352-3965 [1] CLIP (LADDER)  
57. 352-3964 [1] CLIP (LADDER)  
58. 519-7987 Y [1] HARNESS AS-CONTROL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250363
 

374-1291: WIRING GP-MACHINE

374-1291 WIRING GP-MACHINE
S/N JFC1-UP
PART OF 374-1266 ELECTRICAL AR
Type 1
ALSO AN ATTACHMENT
i06215756 KEBP6225
3741291 WIRING GP-MACHINE Parts scheme 3741291 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 7V-5628 [1] PLATE (TOP)  
4. 8T-8737 [2] PLUG-SEAL  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 177-2215 [10] STRAP-DUAL CLAMP  
7. 200-6345 [5] SADDLE-MOUNTING (DUAL SWIVEL)  
8. 204-2281 [10] STRAP-CABLE  
9. 228-7100 [1] SEAL-O-RING  
10. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(AMBIENT AIR)  
11. 260-5865 [1] SWITCH AS-TOGGLE (LIGHT)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
12. 320-3063 [1] SENSOR GP-PRESSURE (AIR FILTER)  
13. 382-2001 [1] SENSOR GP-LIQUID LEVEL (WATER IN FUEL)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  214-7568 [1] SEAL-O-RING  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 421-5575 [1] LAMP GP-INDICATOR (24-VOLT)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1386 E SLEEVE (29-CM)  
15. 423-1796 [1] FILM-IDENTIFICATION (BATTERY DISCONNECT, READ OMM)  
16. 482-9633 Y [1] HARNESS AS-WIRING (MACHINE)  
17. 130-5300 [5] CLIP  
18. 130-5301 [1] CLIP  
19. 132-5789 [2] CLIP (LADDER)  
20. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
21. 237-9960 [2] CLIP (LADDER)  
22. 277-1873 [2] CLIP (LADDER)  
23. 352-3964 [1] CLIP (LADDER)  
24. 352-3968 [2] CLIP (LADDER)  
25. 3K-0360 [1] SEAL-O-RING  
26. 4B-4280 [1] WASHER (13.5X27X2.5-MM THK)  
27. 4P-7428 [1] CLIP (LADDER)  
28. 4P-7581 [13] CLIP (LADDER)  
29. 4P-8134 [1] CLIP (LADDER)  
30. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
31. 7K-1181 [35] STRAP-CABLE  
32. 7V-5626 [2] CLAMP  
33. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
34. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
35. 8C-8451 M [2] BOLT (M6X1X40-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
38. 8T-4171 M [1] BOLT (M6X1X12-MM)  
39. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
40. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
41. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4224 [15] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
46. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
47. 340-8158 Y [1] CONTROL GP-ENGINE ELECTRONIC (AIR COOLING)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250364
 

374-1291: WIRING GP-MACHINE

374-1291 WIRING GP-MACHINE
S/N JFC1-UP
PART OF 374-1266 ELECTRICAL AR
Type 2
ALSO AN ATTACHMENT
i06998642 KEBP6225
3741291 WIRING GP-MACHINE Parts scheme 3741291 WIRING GP-MACHINE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
2. 6I-1418 [4] SPACER (8.2X12.7X28.7-MM THK)  
3. 7V-5628 [1] PLATE (TOP)  
4. 8T-8737 [2] PLUG-SEAL  
5. 8T-9655 [8] MOUNT-ISOLATION  
6. 177-2215 [10] STRAP-DUAL CLAMP  
7. 200-6345 [5] SADDLE-MOUNTING (DUAL SWIVEL)  
8. 204-2281 [10] STRAP-CABLE  
9. 228-7100 [1] SEAL-O-RING  
10. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)(AMBIENT AIR)  
11. 260-5865 [1] SWITCH AS-TOGGLE (LIGHT)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
12. 320-3063 [1] SENSOR GP-PRESSURE (AIR FILTER)  
13. 382-2001 [1] SENSOR GP-LIQUID LEVEL (WATER IN FUEL)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  214-7568 [1] SEAL-O-RING  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 421-5575 [1] LAMP GP-INDICATOR (24-VOLT)  
  5P-5677 E WIRE (18-GA, BLACK)(0.4-M EACH)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  9X-1386 E SLEEVE (29-CM)  
15. 423-1796 [1] FILM-IDENTIFICATION (BATTERY DISCONNECT, READ OMM)  
16. 519-7997 CY [1] HARNESS AS-WIRING (MACHINE)  
17. 130-5300 [5] CLIP  
18. 130-5301 [1] CLIP  
19. 132-5789 [2] CLIP (LADDER)  
20. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
21. 237-9960 [2] CLIP (LADDER)  
22. 277-1873 [2] CLIP (LADDER)  
23. 352-3964 [1] CLIP (LADDER)  
24. 352-3968 [2] CLIP (LADDER)  
25. 3K-0360 [1] SEAL-O-RING  
26. 4B-4280 [1] WASHER (13.5X27X2.5-MM THK)  
27. 4P-7428 [1] CLIP (LADDER)  
28. 4P-7581 [13] CLIP (LADDER)  
29. 4P-8134 [1] CLIP (LADDER)  
30. 5S-7379 [1] BOLT (3/8-16X0.875-IN)  
31. 7K-1181 [35] STRAP-CABLE  
32. 7V-5626 [2] CLAMP  
33. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
34. 7X-0818 M [4] BOLT (M8X1.25X45-MM)  
35. 8C-8451 M [2] BOLT (M6X1X40-MM)  
36. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
37. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
38. 8T-4171 M [1] BOLT (M6X1X12-MM)  
39. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
40. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
41. 8T-4199 M [3] BOLT (M8X1.25X12-MM)  
42. 8T-4200 M [8] BOLT (M8X1.25X16-MM)  
43. 8T-4224 [15] WASHER-HARD (8.8X16X2-MM THK)  
44. 8T-4244 M [1] NUT (M12X1.75-THD)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
46. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
47. 340-8158 Y [1] CONTROL GP-ENGINE ELECTRONIC (AIR COOLING)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250365
 

388-2196: WIRING GP-SENSOR

388-2196 WIRING GP-SENSOR
S/N RDP1-UP
COOLANT
PART OF 372-1058, 516-8902 ENGINE AR-COMPLETE
AN ATTACHMENT
i06512892 KEBP6225
3882196 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [7] STRAP-CABLE  
2. 7K-1181 [4] STRAP-CABLE  
3. 290-5562 [1] MOUNT (DUAL SWIVEL)  
4. 365-4312 Y [1] HARNESS AS-SENSOR (COOLANT TEMPERATURE)  
5. 382-3448 [1] BRACKET  
6. 0S-0509 [1] BOLT (3/8-16X0.75-IN)  
7. 174-9599 [1] STUD (3/8-16-THD)  
8. 4P-7581 [1] CLIP (LADDER)  
9. 4P-8134 [1] CLIP (LADDER)  
10. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250366
 

339-6271: WIRING GP-UNIT INJECTOR

339-6271 WIRING GP-UNIT INJECTOR
S/N RDP1-UP
PART OF 372-1058, 516-8902 ENGINE AR-COMPLETE
FOR USE WITH @@@@@335-2317@@@@@, ENGINES WITHOUT COMPRESSION BRAKE
AN ATTACHMENT
i06258734 KEBP6225
3396271 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 514-5319 Y [1] HARNESS AS-ENGINE  
2. 166-5396 [8] SCREW-WASHER HEAD (1/4-20X0.5-IN)  
3. 359-4892 [1] RING-RETAINING  
4. 359-4893 [1] RING-RETAINING  
  Y   SEPARATE ILLUSTRATION
 

#KEBP62250367
 

518-3877: BELT GP-DRIVE

518-3877 BELT GP-DRIVE
S/N JFC1-UP
PART OF 374-1269 POWER TRAIN AR
ALSO AN ATTACHMENT
i06948852 KEBP6225
5183877 BELT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#KEBP62250368
 

526-0883: BELT GP-DRIVE

526-0883 BELT GP-DRIVE
S/N JFC1-UP
PART OF 374-1269 POWER TRAIN AR
ALSO AN ATTACHMENT
i06998650 KEBP6225
5260883 BELT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO BREAKDOWN OF SERVICEABLE PARTS AVAILABLE AT TIME OF PUBLICATION)
 

#KEBP62250369
 

374-1350: CLUTCH GP

374-1350 CLUTCH GP
S/N JFC1-UP
PART OF 390-2863 CLUTCH GP
ALSO AN ATTACHMENT
i06275089 KEBP6225
3741350 CLUTCH GP Parts scheme
  For full view, you need register

Parts for your PM622 COLD PLANER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 481-2043 [1] UNION (ROTARY)  
2. 481-2038 [1] BEARING  
3. 482-0195 [1] SEAL-O-RING  
4. 481-2037 [1] SEAL-LIP  
5. 481-2045 [1] PLATE-PRESSURE  
6. 482-0196 [2] SEAL-O-RING  
7. 481-3952 [9] SPRING-PRESSURE  
8. 481-2042 [2] DISC-FRICTION  
9. 481-2041 [1] DISC (INNER)  
10. 481-3953 [57] WASHER-SPRING  
11. 481-3951 [1] HUB-CLUTCH  
12. 481-2040 [1] BALL BEARING  
13. 481-2044 [1] RING  
14. 498-1494 [2] STRIP  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

Information:

Operation and Maintenance Manual
Battery Disconnect Switch
PM620 and PM622 Cold Planers
Battery or Battery Cable - Inspect/Replace
PM620 and PM622 Cold Planers
Monitoring System
PM620 and PM622 Cold Planers
Fuses - Replace
PM620 and PM622 Cold Planers
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation of the White Noise Back Up Alarms {7406}
Installation of the White Noise Back Up Alarms {7406}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Systems Operation
Location of Electrical Components
PM620, PM622, PM820, PM822 and PM825 Cold Planer Propel Systems
Electrical Schematic (Auxiliary Hydraulic System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Conveyor System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Hydraulic Fan)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Electrical Schematic (Rotor Drive System)
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Tier 4 Final Engines
Troubleshooting
Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines
ARD Ignition - Test
C13, C15, and C18 Tier 4 Final Engines
Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines
System Schematic
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Wiring Harness (Open Circuit) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Wiring Harness (Short Circuit) - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
ECM Location Code - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Connector Locations
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Electrical Connector - Inspect
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
Connector Contact Description
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
CAN Data Link - Test
PM620, PM622, PM820, PM822 and PM825 Cold Planers Electronic System
CAN Data Link - Test
PM310, PM312, PM313, PM620, PM622, PM820, PM822, and PM825 Cold Planer Monitoring System/Grade and Slope
Disassembly and Assembly
Nozzle Heater Harness - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
New Injector Wiring Harnesses Are Now Used on Certain C15 and C18 Machine Engines {1290, 1408}
Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}
Updated Wire Harness Routing Now Used on PM620 and PM622 Cold Planers {1408}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
Improved Inertial Measuring Unit is Now Available for Certain Track-Type Tractors and Cold Planers {1408}
Improved Inertial Measuring Unit is Now Available for Certain Track-Type Tractors and Cold Planers {1408}

Caterpillar Parts SIS Catalog PM622 :

WIRING GP-MACHINE
374-1289 WIRING GP-MACHINE
WIRING GP-ENGINE
552-1782 WIRING GP-ENGINE
422-8035 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
484-0221 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
484-0221 WIRING GP-ELECTRONIC CONTROL
WIRING GP-DEF MODULE
504-3173 WIRING GP-DEF MODULE
WIRING GP-DEF MODULE
504-3173 WIRING GP-DEF MODULE
WIRING GP-DEF MODULE
396-3860 WIRING GP-DEF MODULE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1290 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1291 WIRING GP-MACHINE
WIRING GP-MACHINE
374-1291 WIRING GP-MACHINE
WIRING GP-SENSOR
388-2196 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
339-6271 WIRING GP-UNIT INJECTOR
BELT GP-DRIVE
518-3877 BELT GP-DRIVE
BELT GP-DRIVE
526-0883 BELT GP-DRIVE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.