BASIC ENGINE
DRIVE GP-PUMPPOWER TRAIN
CLUTCH GPPUMP GP
CONTROL GP
AXLE GP
GEARBOX GP
BRAKING SYSTEM
BRAKE GPPOWER TRAIN
MOTOR GPTRANSMISSION GP
BASIC ENGINE
DRIVE GP-PUMP#KELP25170030
0600-0976: DOUBLE PUMP DRIVE
06000976 DOUBLE PUMP DRIVE
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | NUT | ||
| 2. | [1] | WASHER, LOCK | ||
| 3. | [1] | KEY, SQUARE | ||
| 4. | [1] | SHAFT | ||
| 5. | [1] | HOUSING, CLUTCH | ||
| 6. | [1] | SPACER | ||
| 7. | [1] | WASHER, LOCK | ||
| 8. | [1] | BOLT | ||
| 9. | [1] | HANDLE, CLUTCH | ||
| 10. | [2] | ZERK | ||
| 11. | B | GASKET, PLASTIC STRIP | ||
| 12. | [1] | SEAL, OIL | ||
| 13. | [6] | BEARING | ||
| 14. | [3] | GEAR | ||
| 15. | [2] | PLUG | ||
| 16. | [1] | BREATHER | ||
| 17. | [1] | BUSHING, REDUCER | ||
| 18. | [3] | PLUG | ||
| 19. | [4] | PLUG | ||
| 20. | [1] | ADAPTER, PUMP - "C" | ||
| 21. | [8] | BOLT | ||
| 22. | [1] | ADAPTER, PUMP - "B" | ||
| 23. | [1] | PLUG, MAGNETIC | ||
| 24. | [1] | HOUSING, PUMP DRIVE | ||
| 25. | [1] | SHAFT, CLUTCH | ||
| 26. | [2] | KEY, WOODRUFF | ||
| 27. | [1] | PLATE, INSPECTION | ||
| 28. | [2] | SCREW | ||
| 29. | [4] | BOLT | ||
| 30. | [1] | YOKE | ||
| 31. | [2] | WASHER, LOCK | ||
| 32. | [2] | BOLT | ||
| B | USE AS REQUIRED | |||
#KELP25170031
0600-0030: CLUTCH ASSEMBLY
06000030 CLUTCH ASSEMBLY
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | PLATE, HUB AND BACK | ||
| 2. | [6] | SPRING, RELEASE | ||
| 3. | [1] | PLATE, DRIVING | ||
| 4. | [1] | PLATE, FLOATING | ||
| 5. | [1] | ADJUSTING YOKE ASSY. | ||
| 10. | [1] | SPRING, ADJ. LOCK PIN | ||
| 12. | [1] | ZERK, 45 degrees | ||
| 13. | [1] | NUT, JAM | ||
| 14. | [1] | WASHER, LOCK | ||
| 15. | [1] | HOSE ASSY. | ||
| 16. | [1] | FITTING | ||
| 17. | [1] | HOSE | ||
| 18. | [1] | FITTING | ||
| 19. | [1] | SLEEVE ASSY, SLIDING | ||
| 20. | [8] | PIN, COTTER | ||
| 23. | [1] | SLEEVE, SLIDING | ||
| 24. | [1] | COLLAR ASSY. | ||
#KELP25170032
0600-1417: HYDRAULIC PUMP
06001417 HYDRAULIC PUMP
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CONTROL VALVE ASSY. | ||
| 2. | J | [1] | GASKET, CONTROL VALVE | |
| 3. | [2] | BOLT | ||
| 4. | [4] | BOLT | ||
| 5. | [1] | VALVE, CONTROL | ||
| 6. | [1] | ORIFICE | ||
| 7. | [1] | SCREW, SET | ||
| 8. | [2] | O-RING | ||
| 9. | [2] | RING, RETAINING | ||
| 10. | [1] | LINK, CONTROL | ||
| 11. | [1] | LINK, CONTROL | ||
| 12. | [1] | CONNECTOR, CONTROL | ||
| 13. | [1] | PIN, SLOTTED | ||
| 14. | [2] | PLUG, W/O-RING | ||
| 15. | [1] | NUT | ||
| 16. | [1] | WASHER, LOCK | ||
| 17. | [1] | LEVER, CONTROL | ||
| 18. | [1] | SHAFT, CONTROL | ||
| 19. | [1] | RING, SEALING | ||
| 20. | [1] | O-RING | ||
| 21. | [1] | SWITCH, NEUTRAL LOCKOUT | ||
| 22. | [1] | ADAPTER, NEUTRAL LOCKOUT | ||
| 23. | [1] | PIN, ADAPTER | ||
| 24. | [1] | O-RING | ||
| 25. | [1] | BALL | ||
| 26. | [1] | SCREW, SET | ||
| 27. | [1] | O-RING | ||
| 28. | [1] | HOUSING, CONTROL | ||
| 29. | [1] | CONTROL SPOOL ASSY. | ||
| 30. | [1] | O-RING | ||
| 31. | [1] | SCREW, SPRING ADJ. | ||
| 32. | F | [1] | SCREW, SET | |
| 33. | [1] | HOUSING, VARIABLE | ||
| 34. | [1] | SHIM, TRUNNION | ||
| 35. | J | [2] | O-RING | |
| 36. | [2] | TRUNNION | ||
| 37. | [6] | BOLT | ||
| 38. | [5] | DOWEL | ||
| 39. | [1] | GASKET, END COVER | ||
| 40. | [1] | BEARING, END COVER | ||
| 41. | [1] | SHIM, END COVER BEARING | ||
| 42. | [1] | COVER, PUMP END | ||
| 43. | [2] | CHECK VALVE ASSY. | ||
| 44. | [2] | VALVE, CHECK | ||
| 45. | J | [2] | O-RING | |
| 46. | J | [2] | RING, BACK-UP | |
| 47. | [6] | BOLT | ||
| 48. | [1] | CHARGE PUMP ASSY. | ||
| 49. | [1] | PUMP, CHARGE | ||
| 50. | [4] | BOLT | ||
| 51. | J | [1] | GASKET | |
| 52. | [2] | DOWEL | ||
| 53. | [2] | BOLT | ||
| 54. | [6] | BOLT, SKT. HD. | ||
| 55. | [2] | RETAINER, SERVO | ||
| 56. | [2] | SERVO SLEEVE ASSY. | ||
| 57. | [2] | SLEEVE, SERVO | ||
| 58. | J | [2] | O-RING | |
| 59. | J | [2] | O-RING | |
| 60. | [2] | SERVO PISTON ASSY. | ||
| 61. | [2] | BOLT, SKT. HD. | ||
| 62. | [2] | RETAINER | ||
| 63. | [2] | SPRING, SERVO (LIGHT) | ||
| 64. | [2] | SPRING, SERVO (HEAVY) | ||
| 65. | [2] | PISTON, SERVO | ||
| 66. | [2] | PIN, LINKAGE | ||
| 67. | [4] | RING, RETAINING | ||
| 68. | [2] | LINK, SERVO | ||
| 69. | [1] | PLATE, PUMP | ||
| 70. | [1] | ROTATING GROUP ASSY. | ||
| 71. | [1] | PLATE, BEARING | ||
| 72. | [1] | RING, RETAINING | ||
| 73. | [1] | SPACER | ||
| 74. | [1] | SPRING | ||
| 75. | [2] | DOWEL | ||
| 76. | [1] | SPACER | ||
| 77. | [1] | BARREL | ||
| 78. | [6] | DOWEL | ||
| 79. | [1] | GUIDE, RETAINER | ||
| 80. | [1] | RETAINER, SLIPPER | ||
| 81. | [9] | PISTON ASSY. | ||
| 82. | [1] | BEARING | ||
| 83. | J | [1] | GASKET, MOUNTING FLANGE | |
| 84. | [1] | SHAFT, PUMP | ||
| 85. | [1] | FLANGE, MOUNTING | ||
| 86. | [12] | BOLT | ||
| 87. | [1] | DRIVE SHAFT SEAL KIT | ||
| 88. | J | [1] | O-RING | |
| 89. | [1] | SEAL, ROTATING | ||
| 90. | [1] | SEAL, STATIONARY | ||
| 91. | [1] | RING, RETAINING | ||
| 92. | [1] | PLATE, THRUST | ||
| 93. | [1] | SWASHPLATE, VARIABLE | ||
| 94. | [2] | PIN, LINKAGE | ||
| 95. | [4] | RING, RETAINING | ||
| 96. | [2] | BEARING, TRUNNION | ||
| 97. | [1] | PIN, LINKAGE | ||
| 98. | [2] | RING, RETAINING | ||
| 99. | [1] | PIN, HITCH | ||
| 100. | [1] | LINK | ||
| 101. | [1] | PIN, CLEVIS | ||
| 102. | [1] | PLUG W/O-RING | ||
| 103. | [1] | PLUG W/O-RING | ||
| F | NOT SHOWN | |||
| J | INCLUDED IN 81010159 OVERHAUL | |||
#KELP25170033
PROPEL CONTROL ASSEMBLY
PROPEL CONTROL ASSEMBLY
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | WASHER, LOCK - 1/4 | ||
| 2. | [1] | NUT, 1/4 N.C. | ||
| 3. | [2] | BUSHING | ||
| 4. | K | [1] | B. 1/4 N.C. X 1/2 | |
| 5. | [1] | KNOB | ||
| 6. | [1] | LEVER | ||
| 7. | [1] | PLUNGER, BALL | ||
| 8. | [1] | NUT 1/2 N.C. - JAM | ||
| 9. | [1] | WASHER, FLAT - 7/16 | ||
| 10. | [1] | NUT, 1/2 N.F.E.S. | ||
| 11. | [1] | CAM, FOLLOWER | ||
| 12. | [1] | SWITCH, CONTROL | ||
| 13. | [1] | CONNECTOR | ||
| 14. | [1] | PIVOT, CABLE END | ||
| 15. | [1] | PIN, PIVOT | ||
| 16. | [1] | PIN, COTTER | ||
| 17. | K | [2] | SCREW #10 - 32 X 2" | |
| 18. | [1] | SHIM, CLAMP | ||
| 19. | K | [2] | B. #10 - 32 X 5/8" | |
| 20. | [1] | CLAMP, CABLE | ||
| 21. | [1] | CABLE | ||
| 22. | [1] | JOINT, BALL | ||
| 23. | [2] | B. 5/16 N.C. X 2" | ||
| 24. | [2] | SPACER | ||
| 25. | [1] | BRACKET, CONTROL CABLE | ||
| 26. | K | [1] | B. 5/16 N.C. X 3/4" | |
| K | FOR WASHER AND NUT PART NUMBER | |||
#KELP25170034
AXLE MOUNTING ASSEMBLY
AXLE MOUNTING ASSEMBLY
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | AXLE ASSEMBLY | |
| 2. | K | [2] | B. 5/8 N.C. X 2 1/4" | |
| 3. | [1] | MOUNT, SHOCK | ||
| 4. | [1] | HANGER | ||
| 5. | [1] | GASKET | ||
| 6. | Y | [1] | MOTOR, HYDRAULIC | |
| 7. | [4] | B. 1/2 N.C. X 1 1/2" - NYLOK | ||
| 8. | [8] | WASHER, FLAT - 7/16 | ||
| 9. | K | [4] | B. 3/4 N.C. X 7" GR. 8 | |
| K | FOR WASHER AND NUT PART NUMBER | |||
| Y | SEPARATE ILLUSTRATION | |||
#KELP25170035
0600-1611: AXLE ASSEMBLY
06001611 AXLE ASSEMBLY
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [2] | CUP | ||
| 2. | [2] | CONE | ||
| 3. | [12] | NUT | ||
| 4. | [12] | WASHER | ||
| 5. | [1] | CASE, DIFFERENTIAL | ||
| 6. | [1] | RING GEAR AND PINION ASSY. | ||
| 7. | [12] | BOLT | ||
| 8. | [2] | WASHER | ||
| 9. | [2] | GEAR | ||
| 10. | [4] | WASHER | ||
| 11. | [4] | PINION | ||
| 12. | [1] | SPIDER | ||
| 13. | [8] | WASHER | ||
| 14. | [8] | BOLT | ||
| 15. | [1] | CARRIER AND TUBE ASSY. | ||
| 16. | [1] | SHAFT, AXLE - SHORT | ||
| 17. | [1] | LOCK | ||
| 18. | [1] | BEARING | ||
| 19. | [2] | CONE, BEARING | ||
| 20. | [2] | CUP, BEARING | ||
| 21. | [1] | GASKET | ||
| 22. | [1] | CAGE | ||
| 24. | [6] | BOLT | ||
| 25. | [6] | WASHER, LOCK | ||
| 26. | [2] | NUT | ||
| 27. | [1] | LOCK | ||
| 28. | [1] | WASHER | ||
| 29. | [1] | SLEEVE | ||
| 30. | [1] | SEAL, OIL | ||
| 31. | [1] | DOWEL | ||
| 32. | [11] | NUT | ||
| 33. | [11] | WASHER, LOCK | ||
| 34. | [11] | GASKET | ||
| 35. | [11] | BOLT | ||
| 36. | [2] | PLUG | ||
| 37. | [1] | PIN | ||
| 38. | [16] | NUT | ||
| 39. | [16] | WASHER | ||
| 40. | [16] | BOLT | ||
| 42. | [1] | SHAFT, AXLE - LONG | ||
| 43. | [1] | BREATHER | ||
| 44. | [1] | CARRIER COVER ASSY. | ||
| 45. | [1] | BLOCK, THRUST | ||
| Y | SEPARATE ILLUSTRATION | |||
#KELP25170036
GEAR BOX ASSEMBLY
GEAR BOX ASSEMBLY
Part of 06001611
Part of 06001611
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CASE, GEAR BOX | ||
| 2. | [1] | PLUG | ||
| 3. | J | [1] | BREATHER | |
| 4. | [1] | BALL | ||
| 5. | [1] | SPRING | ||
| 6. | [1] | WASHER | ||
| 7. | [1] | BOLT | ||
| 8. | J | [1] | SEAL, OIL | |
| 9. | [1] | SHAFT, SHIFT | ||
| 10. | J | [2] | DOWEL | |
| 11. | [2] | BEARING | ||
| 12. | [1] | GEAR | ||
| 13. | [1] | SPACER | ||
| 14. | J | [1] | GASKET | |
| 16. | [10] | WASHER, LOCK | ||
| 17. | [10] | BOLT | ||
| 18. | [1] | GASKET | ||
| 19. | [1] | COVER | ||
| 20. | [3] | WASHER, LOCK | ||
| 21. | [3] | BOLT | ||
| 22. | [2] | BEARING | ||
| 23. | [1] | SPACER | ||
| 24. | [1] | RING, SNAP | ||
| 25. | [1] | RING, SNAP | ||
| 26. | [2] | PLUG | ||
| 27. | [1] | PINION | ||
| 28. | [1] | BEARING | ||
| 29. | [1] | GEAR | ||
| 30. | J | [1] | SEAL, OIL | |
| 31. | [5] | BOLT | ||
| 32. | [6] | WASHER, LOCK | ||
| 33. | [1] | SCREW, SET | ||
| 34. | [1] | WIRE, LOCK | ||
| 35. | [1] | FORK, SHIFT | ||
| 36. | F | [1] | BOLT | |
| F | NOT SHOWN | |||
| J | INCLUDED WITH ITEM 1 GEAR BOX | |||
#KELP25170037
BRAKE AND PLANETARY ASSEMBLY
BRAKE AND PLANETARY ASSEMBLY
Part of 06001611
Part of 06001611
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [32] | BOLT | ||
| 2. | [32] | WASHER | ||
| 3. | J | [2] | SPIDER | |
| 4. | [2] | BUTTON | ||
| 5. | [2] | O-RING | ||
| 6. | [2] | RING, SNAP | ||
| 7. | [2] | GEAR | ||
| 8. | [2] | GEAR | ||
| 9. | [2] | NUT | ||
| 10. | [2] | PIN | ||
| 11. | [2] | CONE | ||
| 12. | [4] | CUP | ||
| 13. | [16] | NUT | ||
| 14. | [2] | HUB | ||
| 15. | [16] | STUD | ||
| 16. | [2] | SEAL | ||
| 17. | [2] | SLEEVE, WEAR | ||
| 18. | [2] | CONE | ||
| 19. | [1] | LINK ASSY. - L.H. | ||
| 20. | F | [1] | LINK ASSY. - R.H. | |
| 21. | [2] | PIN, COTTER | ||
| 22. | [2] | COVER | ||
| 23. | [2] | SPRING | ||
| 24. | [2] | WHEEL CYLINDER ASSY. | ||
| F | [1] | REPAIR KIT, WHEEL CYLINDER | ||
| 25. | [1] | PLATE, L.H. BACKING | ||
| 26. | F | [1] | PLATE, R.H. BACKING | |
| 27. | [2] | SCREW, BLEEDER | ||
| 28. | [2] | GASKET | ||
| 29. | [2] | INLET | ||
| 30. | [2] | SCREW | ||
| 31. | [2] | BOLT | ||
| 32. | [2] | WASHER, LOCK | ||
| 33. | [4] | BOLT ASSY. | ||
| 34. | [4] | WASHER | ||
| 35. | [4] | SPRING | ||
| 36. | [4] | CAM, ADJUSTING | ||
| 37. | [2] | WASHER | ||
| 38. | [2] | BOLT | ||
| 39. | [4] | BRAKE SHOE ASSY. | ||
| 40. | [4] | ROD | ||
| 41. | [2] | SPRING | ||
| 42. | [2] | SPRING | ||
| 43. | [2] | DRUM, BRAKE | ||
| 44. | [10] | WASHER | ||
| 45. | [16] | BOLT | ||
| 46. | [4] | SPRING ASSY. | ||
| 47. | [6] | RING, SNAP | ||
| 48. | [6] | WASHER | ||
| 49. | [6] | PINION | ||
| 50. | [6] | SHAFT | ||
| 51. | [6] | SCREW, SET | ||
| 52. | [2] | PLUG | ||
| F | NOT SHOWN | |||
| J | ALSO INCLUDES ITEMS 4, 48, 50 | |||
#KELP25170038
0600-1018: HYDRAULIC MOTOR
06001018 HYDRAULIC MOTOR
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | ROTATING GROUP ASSY. | ||
| 2. | [9] | PISTON ASSY. | ||
| 3. | [1] | RETAINER, SLIPPER | ||
| 4. | [6] | DOWEL | ||
| 5. | [1] | GUIDE, RETAINER | ||
| 6. | [1] | BARREL ASSY. | ||
| 7. | [2] | DOWEL | ||
| 8. | [1] | SPACER | ||
| 9. | [1] | SPRING | ||
| 10. | [1] | SPACER | ||
| 11. | [1] | RING | ||
| 12. | [1] | PLATE, BEARING | ||
| 13. | [1] | PLATE, VALVE | ||
| 14. | J | [1] | GASKET | |
| 15. | [1] | BEARING | ||
| 16. | [1] | SHIM | ||
| 17. | [1] | COVER, END | ||
| 18. | [2] | BOLT | ||
| 19. | [1] | VALVE BLOCK ASSY. | ||
| 20. | J | [1] | SEAL KIT, BLOCK | |
| 21. | [1] | VALVE, CHARGE RELIEF | ||
| 22. | [3] | O-RING | ||
| 23. | [1] | SHUTTLE VALVE KIT | ||
| 24. | [3] | PLUG | ||
| 25. | [2] | VALVE, HIGH PRESS. RELIEF | ||
| 26. | [3] | O-RING | ||
| 27. | [4] | BOLT | ||
| 28. | [6] | BOLT | ||
| 29. | [1] | SWASHPLATE | ||
| 30. | [1] | SHAFT | ||
| 31. | [1] | SEAL KIT, SHAFT | ||
| 32. | [2] | O-RING | ||
| 33. | [1] | SEAL ASSY., ROTATING | ||
| 35. | [1] | BEARING | ||
| 36. | [3] | DOWEL | ||
| 37. | [1] | PLUG ASSY. | ||
| 38. | [1] | PLUG | ||
| 39. | [1] | DOWEL | ||
| 40. | [1] | HOUSING | ||
| J | INCLUDED IN 81010194 SEAL KIT | |||
#KELP25170039
TRANSMISSION SHIFT ASSEMBLY
TRANSMISSION SHIFT ASSEMBLY
Parts for your CS-431 VIBRATORY COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [2] | LINK, TRANSMISSION | ||
| 2. | K | [3] | B. 1/2 N.C. X 2" | |
| 3. | [1] | LINKAGE | ||
| 4. | [1] | LEVER, SHIFT | ||
| 5. | [1] | GRIP | ||
| 6. | [2] | WASHER, FLAT - 1/2 | ||
| 7. | [1] | NUT, 1/2 N.C.E.S. | ||
| 8. | [1] | BELLCRANK, TRANSMISSION | ||
| 9. | K | [1] | B. 1/2 N.C. X 1 3/4" | |
| 10. | K | [1] | B. 1/4 N.C. X 1 1/2" | |
| K | FOR WASHER AND NUT PART NUMBER | |||
Information:
BASIC ENGINE
DRIVE GP-PUMP
General Service Information
