KEY-WOODRUFF 1971710 - Caterpillar

Service Tools
General Tools and Parts
Table 1
1/4 Inch Drive    
1/4 in. Drive Socket Wrench    
1/4 in. Drive Torque Wrench 5-125 in-lb    
1/4 in. Socket    
3/8 in. Socket    
7/16 in. Socket    
3 in. Extension    
6 in. Extension    
Table 2
3/8 Inch Drive    
3/8 in. Drive Socket Wrench    
3/8 in. Drive Torque Wrench 5-125 ft-lb    
1/4 in. Deep Socket    
3/8 in. Deep Socket    
7/16 in. Deep Socket    
1/2 in. Deep Socket    
9/16 in. Deep Socket    
3/4 in. Deep Socket    
1 in. Deep Socket    
3 in. Extension    
6 in. Extension    
12 in. Extension    
Table 3
1/2 Inch Drive    
1/2 in. Drive Socket Wrench    
1 1/8 in. Deep Socket    
Table 4
Wrenches    
5/16 in. Open End/Box Wrench    
3/8 in. Open End/Box Wrench    
7/16 in. Open End/Box Wrench    
1/2 in. Open End/Box Wrench    
9/16 in. Open End/Box Wrench    
5/8 in. Open End/Box Wrench    
11/16 in. Open End/Box Wrench    
3/4 in. Open End/Box Wrench    
1 1/16 in. Open End/Box Wrench    
1 1/2 in. Open End/Box Wrench    
1 1/8 in. Open End/Box Wrench Cut Short    
Table 5
Hex Wrenches    
7/64 in. Hex Wrench for RPS    
3/16 in. Hex Wrench for transformer removal    
5/16 in. Hex Wrench for door    
5/32 in. Hex Wrench for FC IGBTs and DC capacitors    
5 mm Hex Wrench for capacitors on FW IGBTs    
Table 6
Hex Sockets    
1/4 in. Hex Socket for Load Cell    
5/16 in. Hex Socket    
10 mm Hex Socket for K3 and K4 removal    
Table 7
General    
Set of Phillips Head Screwdrivers    
Set of Flat Head Screwdrivers    
Drop light    
Inspection mirror    
Magnet    
Lock-Tite (262)    
Wire Strippers 10 - 18 AWG    
Terminal Crimpers 10 - 18 AWG    
Fuse Puller Small/Large    
Safety Glasses    
Electronic Safety Gloves - Inner (Class "O" Rubber)    
Electronic Safety Gloves - Outer (12 in. Leather)    
Table 8
Special Tools - Non-Active Power    
Depth Micrometer or Vernier Caliper    
AC/DC Current Probe (Fluke 80i - 110s or equivalent)    
3000 Amp Current Probe Clamp (Fluke 3000i or equivalent)    
Oscilloscope    
Digital Multimeter (Fluke 87 or equivalent) and Deluxe Test Lead Set    
Feeler Gauges (four Sets)    
AMP Pin extractor (Micro, Mini, Large) - (MFG #189727-1 (mini))    
Electrostatic Discharge (ESD) Wrist Strap    
USB to RS-232 Adapter    
Table 9
Specialty Tools and Parts from Active Power Inc.    
Alignment Pins for bearing insertion (2 required)    
Bearing Shim pack for Bearing Cartridge    
Calibration Plugs for Load Cell calibration.    
Rotor Shim set. (4 required)    
Bearing Removal Tool (Puller)    
Bearing Installation Tool    
Contact Wedge for Load Cell Installation    
UPSView    
High Vacuum Grease