KEY-SET KEY 2933026 - Caterpillar

2933026 KEY-SET KEY Caterpillar parts

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2933026
293-3026
2933026

Weight: 0.80 pounds 0 kg.

Buy KEY-SET KEY 2933026 Caterpillar genuine, new aftermarket tractor parts with delivery

This part in 2 request: Show. This information for suppliers only!

#1209516 293-3026

2023-09-19

#1208526 293-3026

2023-09-18

For full view, you need register

Information:

Pilot Valve (Joystick) (Left Hand)
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 1 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 2 g02216734
Remove covers (1) and (2).
Illustration 3 g02216775
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 4 g02216774
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal. Pilot Valve (Joystick) (Right Hand)
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 311-1362 Vacuum Gauge Gp 1
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Release the hydraulic system pressure.
Illustration 5 g02138430
Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the hydraulic system.
Illustration 6 g02217301
Remove covers (1) and (2).
Illustration 7 g02217302
Disconnect hose assemblies (4) from pilot valve (3).
Illustration 8 g02217303
Disconnect harness assemblies (5).
Remove bolts (6) and pilot valve (3). Installation Procedure
Install pilot valve (3) in the reverse order of removal.