KIT 0032924 - Caterpillar

Specifications
Illustration 1 g02344389
Table 1
SPECIFICATIONS FOR 341-4176 Temperature Sensor    
Callout     Part Number     Part Name     Specification Description    
3
5     341-4176     Temperature Sensor     Apply Loctite 771 to the threads.
Torque to.........................
45 5 N m (33 4 lb ft)    Removal Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     -     Loctite 771     1    
Open both the right side and left side engine doors.
Illustration 2 g02344378
Cut cable strap (2) and disconnect harness assembly (1) .
Illustration 3 g02344376
Right Side of the Machine
Illustration 4 g02344377
Left Side of the Machine.
Cut clips (4) and remove flame detection temperature sensor (3) .
Cut clips (4) and remove inlet temperature sensor (5) .Installation Procedure
Install flame detection temperature sensor (3) and inlet temperature sensor (5) in the reverse order of removal.
Apply Tooling (A) to the threads on flame detection temperature sensor (3). Tighten the flame detection temperature sensors (3) to a torque of 45 5 N m (33 4 lb ft).
Apply Tooling (A) to the threads on inlet temperature sensor (5). Tighten the inlet temperature sensor (5) to a torque of 45 5 N m (33 4 lb ft).