KIT RING 0334252 - Caterpillar

Illustration 16 g02736659
Use a suitable press and Tooling (B) in order to remove ring gear (20) for the housing. Assembly Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
C 9S-8864 Plate 1
D 129-1967 Multipurpose Grease 1
E 1P-0510 Driver Gp 1
Illustration 17 g02736756
Raise the temperature of ring gear (20). Use a suitable press and Tooling (C) in order to install ring gear (20) onto the housing.
Illustration 18 g02736436
Install thrust washer (19).
Illustration 19 g02736396
Install thrust bearing (18).
Illustration 20 g02736356
Install axle bevel gear (17).
Illustration 21 g02736317
Install bearings (15) and bearings (13). Install spider gears (14) and long spider gear shaft (16).
Illustration 22 g02736563
Install spider gears (11) and short spider shafts (12). Drive spring pins (10) into short spider shafts (12).
Illustration 23 g02736787
Install axle bevel gear (9). Install thrust bearing (8).
Illustration 24 g02736604
Apply Tooling (D) to thrust washer (7). Install thrust washer (7) onto housing (5).
Illustration 25 g02737019
Install housing (5) and start bolts (4).
Raise the temperature of bearing (6). Install bearing (6).
Illustration 26 g02737061
Use a suitable press and Tooling (E) in order to secure the differential assembly. Tighten bolts (4) to a torque of 400 N m (295 lb ft).
Illustration 27 g02737101
Install upper housing (2) and start bolts (1).
Raise the temperature of bearing (3). Install bearing (3).
Illustration 28 g02737105
Use a suitable lifting device in order to position the differential onto a suitable press. The weight of the differential is approximately 77 kg (170 lb). Use the suitable press and Tooling (E) in order to secure the differential. Tighten bolts (1) to a torque of 185 N m (136 lb ft).