KIT 0778095 - Caterpillar

Skid Steer Loader:
216 (S/N: 4NZ1-UP)
226 (S/N: 5FZ1-UP)
228 (S/N: 6BZ1-UP)
236 (S/N: 4YZ1-UP)
246 (S/N: 5SZ1-UP)
248 (S/N: 6LZ1-UP)
252 (S/N: FDG1-UP)
262 (S/N: CED1-UP)
Multi Terrain Loader:
267 (S/N: CMP1-UP)
277 (S/N: CNC1-UP)
Operation and Maintenance, SEBU7468, "216, 226, 228, 236, 246, 248, 252, and 262 Skid Steer Loaders", "Cooling System Coolant (ELC) - Change". This module is part of Service Manual, RENR2850. Update this procedure, as described below.Operation and Maintenance, SEBU7494, "267 and 277 Multi Terrain Loaders", "Cooling System Coolant (ELC) - Change". This module is part of Service Manual, RENR4820. Update this procedure, as described below.Add the following notes to Step 7 of the procedure.Note: Premix the coolant solution BEFORE filling the cooling system. The coolant solution should contain 50 percent coolant and 50 percent distilled water.Note: Add the coolant solution at a MAXIMUM rate of five liters per minute. This will reduce the chance of trapping air inside the engine block. A large amount of trapped air can cause localized heating to occur upon engine start-up. Localized heating may result in engine damage, which may lead to failure of the engine.