KIT-RING 0966788 - Caterpillar

0966788 KIT-RING Caterpillar parts 307, 307B, E70, E70B

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA0966788
096-6788
0966788

Weight: 0.01 pounds 0 kg.

Buy KIT-RING 0966788 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, MINI HYD EXCAVATOR,

This part in 1 request: Show. This information for suppliers only!

#133919 0966788

2018-01-11

Compatible equipment models: 0966788:

EXCAVATOR 307 E70 E70B

MINI HYD EXCAVATOR 307 307B Caterpillar

Number on catalog scheme: 25

Caterpillar 0966788 Parts scheme KIT-RING

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1 Start By:
Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
If necessary, remove the OEM equipment from the rear power take-off (RPTO).
Illustration 1 g02069019
Illustration 2 g02069023
Remove bolts (1). Remove adapter (2) from flywheel housing (9). Remove O-ring seal (3) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove bolts (4). Remove adapter (5) from flywheel housing (9). Remove O-ring seal (6) (not shown). Note: Make a temporary mark on the adapter and the flywheel housing in order to show the correct orientation of the adapter.
Remove gear (7) from crankshaft (8).
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the adapter.
Place adapter (2) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (10) from adapter (2).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from adapter (5).
Illustration 3 g02069020
Remove gear assembly (11) and gear assembly (12) from flywheel housing (9).
Illustration 4 g02069021
Remove bolts (13). Remove gear (17) and idler hub (15) from flywheel housing (9).
Remove bolts (14). Remove gear (18) and idler hub (16) from flywheel housing (9).
Illustration 5 g02069453
If necessary, follow Steps 9.a through Steps 9.c in order to remove the sleeve bearing from the gear.
Place gear (17) onto suitable support.
Use Tooling (A) and a suitable press in order to remove sleeve bearing (19) from gear (17).
Repeat Steps 9.a through Step 9.b in order to remove the sleeve bearing from the remaining gear.
Illustration 6 g02069024
If necessary, follow Steps 10.a through Steps 10.b in order to remove the sleeve bearing from the flywheel housing.
Use a suitable tool in order to remove sleeve bearing (20) from flywheel housing (9).
Repeat Step 10.a in order to remove sleeve bearing (21) from flywheel housing (9).