1003043 KIT-REPAIR Caterpillar parts
120G, 12G, 130G, 140G, 160G, 518C, 528B, 530B, 936F
Rating:
Alternative (cross code) number:
CA1003043
100-3043
1003043
CA1003043
100-3043
1003043
Weight: 0.56 pounds 0 kg.
MOTOR GRADER, WHEEL SKIDDER,
Compatible equipment models: 1003043:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00675794
Install a new gasket (6) on the cylinder head.
Illustration 2 g00629952
Position the air inlet manifold (5) on the engine.
Install bolts (4). Tighten the bolts to a torque of 28 7 N m (21 5 lb ft).
Install air inlet elbows (2) on air inlet manifold (5).
Install bolts (1) and connect air inlet heater solenoid (3). End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00675794
Install a new gasket (6) on the cylinder head.
Illustration 2 g00629952
Position the air inlet manifold (5) on the engine.
Install bolts (4). Tighten the bolts to a torque of 28 7 N m (21 5 lb ft).
Install air inlet elbows (2) on air inlet manifold (5).
Install bolts (1) and connect air inlet heater solenoid (3). End By:
Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install".
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
2G6285
KIT-AIR CONTROL VALVE
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, ...
1137916
KIT-SEAL
120G, 12G, 130G, 140G, 14H, 14H NA, 160G
120G, 12G, 130G, 140G, 14H, 14H NA, 160G
1857688
KIT-SEAL
120M, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 24H, 24M
120M, 12G, 12H, 12H ES, 12H NA, 12M, 130G, 140G, 140H, 140H ES, 140H NA, 140M, 143H, 160H, 160H ES, 160H NA, 160M, 163H, 163H NA, 24H, 24M
1857025
KIT-SEAL
120G, 12G, 130G, 140G, 160G
120G, 12G, 130G, 140G, 160G
6G5874
KIT-COTTER PIN
120G, 130G, 14G, 14H, 14H NA
120G, 130G, 14G, 14H, 14H NA
3927187
KIT-GASKET
12H, 140G, 140H, 140H NA, 143H, 160H
12H, 140G, 140H, 140H NA, 143H, 160H
9D9114
KIT (maintenance)
120G, 12G, 130G, 140G, 14G, 16G
120G, 12G, 130G, 140G, 14G, 16G
3G1708
KIT (seal)
120G, 12G, 130G
120G, 12G, 130G
2G8053
KIT (refill)
120G, 12G, 130G, 14G, 16G
120G, 12G, 130G, 14G, 16G
2G8054
KIT (valve)
120G, 12G, 130G, 14G, 16G
120G, 12G, 130G, 14G, 16G
8T1414
KIT-HYD CYLINDER SEAL
130G, 160G
130G, 160G
6E3726
KIT-SEAL
926
926
8R4073
KIT-POWER CYLINDER
IT12B, IT14B, IT14F
IT12B, IT14B, IT14F
9M0587
KIT
651
651