1018644 KIT-GASKET Caterpillar parts
3406B, G3406
Rating:
Alternative (cross code) number:
CA1018644
101-8644
1018644
CA1018644
101-8644
1018644
Weight: 0.09 pounds 0 kg.
GAS ENGINE, INDUSTRIAL ENGINE,
Related part:
1018644
GASKET KT-YM
4368416
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
RAParts 1018644 New Gasket Kit for Several Fits Caterpillar Fits CAT Models
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Cooler Gasket Kit Fits Caterpillar Models. Replaces Part Number: || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Cooler Gasket Kit Fits Caterpillar Models. Replaces Part Number: || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Beck/Arnley 1018644 Tie Rod End
Beck/Arnley Matches OE form, fit and function || Coated or plated for corrosion protection || Ball joint is pre-greased || Easy access wrench flat allows for the use of a socket for easy installation and removal || Full ball stud
Beck/Arnley Matches OE form, fit and function || Coated or plated for corrosion protection || Ball joint is pre-greased || Easy access wrench flat allows for the use of a socket for easy installation and removal || Full ball stud
RAParts 1018644 New Gasket Kit for Several Fits Caterpillar Fits CAT Models
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Cooler Gasket Kit Fits Caterpillar Models. Replaces Part Number: || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
Reliable Aftermarket Parts One New Aftermarket Replacement Oil Cooler Gasket Kit Fits Caterpillar Models. Replaces Part Number: || OEM Numbers Are Provided for Reference Only. Please Verify Fit Prior To Ordering. || Please Note: Some Listings Use Stock Images for Reference and May Differ from the Actual Product. || This Aftermarket Part Is Made to Meet or Exceed Manufacturer (OEM) Specifications. || All OEM part numbers and logos are to be used for identification purposes only.
This part in 2 request:
Show.
This information for suppliers only!
2024-10-14
2024-10-10
For full view, you need register
Compatible equipment models: 1018644:
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00913137
Install crankshaft gear (8) and the bolts.
Illustration 2 g00913136
Install shaft (7) and the bolts. The torque for the bolts is 140 10 N m (105 5 lb ft).
Illustration 3 g01051669
Illustration 4 g01068502
(4) Camshaft Idler Gear. (9) Bearing. (E) 81.060 0.010 mm (3.1913 0.0004 inch). (F) 1.00 0.25 mm (0.040 0.010 inch).
Use Tooling (A) and a suitable press to install the bearings in camshaft idler gears (4) . Install bearing (9) into gear (4) to Depth (F) , as shown.
Machine the inside diameter of bearing (9) to Dimension (E) , as shown.Note: The surface finish of Bore (E) must be 0.8 micrometers. Pitch Diameter (H) must be concentric with a total indicator reading of 0.12 mm (0.005 inch). Surface (G) of gear (4) must be square with Bore (E) within 0.05 mm (0.002 inch).
Place clean engine oil on the bearings and install shafts (5) with washers (6) on camshaft idler gears (4) .
Illustration 5 g00913054
Install camshaft idler gears (4) and the bolts.
Illustration 6 g01068516
(2) Cluster Idler Gear. (3) Bearing. (A) 75.060 0.010 mm (2.9551 0.0004 inch). (B) 1.5 0.5 mm (0.06 0.02 inch).
Use Tooling (A) and a suitable press to install bearing (3) in gear (2) . Install bearing (3) to Depth (B) , as shown.
Machine the inside diameter of the bearing to Dimension (A) , as shown.Note: The surface finish of Bore (A) must be 0.8 micrometers. Pitch Diameter (C) must be concentric with a total indicator reading of 0.15 mm (0.006 inch). Surface (D) of gear (2) must be square with Bore (A) within 0.05 mm (0.002 inch).Note: The following Step is for 3508 and G3508 Engines.
Illustration 7 g01056631
Note: When you install the rear cluster gear assembly to the crank gear, there are no timing marks on the 3512, 3516, G3512 and G3516 engines. On the 3508 and G3508 engines, the rear cluster gears have timing marks that must be aligned with the marks that are on the cluster gears.
Put clean engine oil on the bearing and install the gear assembly on the shaft. Make sure that the marks on the gear assembly and the crankshaft are in alignment with the rotation of the engine, as shown.
Illustration 8 g00913045
Place clean engine oil on gear (2) and install gear (2) on the engine.
Install plate (1) and the bolts.End By: Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Gp 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00913137
Install crankshaft gear (8) and the bolts.
Illustration 2 g00913136
Install shaft (7) and the bolts. The torque for the bolts is 140 10 N m (105 5 lb ft).
Illustration 3 g01051669
Illustration 4 g01068502
(4) Camshaft Idler Gear. (9) Bearing. (E) 81.060 0.010 mm (3.1913 0.0004 inch). (F) 1.00 0.25 mm (0.040 0.010 inch).
Use Tooling (A) and a suitable press to install the bearings in camshaft idler gears (4) . Install bearing (9) into gear (4) to Depth (F) , as shown.
Machine the inside diameter of bearing (9) to Dimension (E) , as shown.Note: The surface finish of Bore (E) must be 0.8 micrometers. Pitch Diameter (H) must be concentric with a total indicator reading of 0.12 mm (0.005 inch). Surface (G) of gear (4) must be square with Bore (E) within 0.05 mm (0.002 inch).
Place clean engine oil on the bearings and install shafts (5) with washers (6) on camshaft idler gears (4) .
Illustration 5 g00913054
Install camshaft idler gears (4) and the bolts.
Illustration 6 g01068516
(2) Cluster Idler Gear. (3) Bearing. (A) 75.060 0.010 mm (2.9551 0.0004 inch). (B) 1.5 0.5 mm (0.06 0.02 inch).
Use Tooling (A) and a suitable press to install bearing (3) in gear (2) . Install bearing (3) to Depth (B) , as shown.
Machine the inside diameter of the bearing to Dimension (A) , as shown.Note: The surface finish of Bore (A) must be 0.8 micrometers. Pitch Diameter (C) must be concentric with a total indicator reading of 0.15 mm (0.006 inch). Surface (D) of gear (2) must be square with Bore (A) within 0.05 mm (0.002 inch).Note: The following Step is for 3508 and G3508 Engines.
Illustration 7 g01056631
Note: When you install the rear cluster gear assembly to the crank gear, there are no timing marks on the 3512, 3516, G3512 and G3516 engines. On the 3508 and G3508 engines, the rear cluster gears have timing marks that must be aligned with the marks that are on the cluster gears.
Put clean engine oil on the bearing and install the gear assembly on the shaft. Make sure that the marks on the gear assembly and the crankshaft are in alignment with the rotation of the engine, as shown.
Illustration 8 g00913045
Place clean engine oil on gear (2) and install gear (2) on the engine.
Install plate (1) and the bolts.End By: Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing - Install".
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts kit Caterpillar catalog:
3406B, 3406C
3406B, 3406C, 3406E
3406B, 3406C, 3406E
3406B, 824C
3406B, 3406C, 3406E
3406B, 3406E
3406B, 3406E
3406B, 3406C, 3406E, C-15
3406B, 3406C, 3406E
3406B, 3406E
3406B, 3406C, 3406E
G3406
D40D, G3406
1003979
KIT-GENERATOR REPAIR
3306, 3306B, 3406B, 3406C, G3406
3306, 3306B, 3406B, 3406C, G3406
1832885
KIT-IGNITION
G3406
G3406
1487193
KIT-GAS VALVE
G3406
G3406
3406C, G3406
3935763
KIT-OIL COOLER & LINES GASKET
611, 615C
611, 615C
2463256
KIT-PARTS
G3306, G3406
G3306, G3406
G3406
3406C, G3406